[Openchrome-users] MY ISSUE - RENDER

[Xavier Bachelot]

Richard May wrote:
> Okay - here is the info. Let's see if I can clear this up for everyone 
> (sorry, I'm new and confused - lol like that is new)
> 
> If I type this in a terminal window: glxinfo | grep direct
> I get this: direct rendering: No (If you want to find out why, try 
> setting LIBGL_DEBUG=verbose)
> OpenGL renderer string: Mesa GLX Indirect
> 
> 
> I am running on a P4M900 motherboard with the Chrome9 HC 3D /2 D 
> Graphics card
> My xorg.conf file is as follows:
> 
...snip...

> Section "Device"
>     Identifier    "Generic Video Card"
>     Boardname    "vesa"
>     Busid        "PCI:1:0:0"
>     Driver        "vesa"
>     Screen    0
> EndSection
> 
huh, vesa ? This should be openchrome.

> Section "Monitor"
>     Identifier    "Generic Monitor"
>     Vendorname    "Generic LCD Display"
>     Modelname    "LCD Panel 1280x1024"
>     Horizsync    31.5-64.0
>     Vertrefresh    56.0 - 65.0
>   modeline  "640x480 at 60" 25.2 640 656 752 800 480 490 492 525 -vsync -hsync
>   modeline  "800x600 at 56" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
>   modeline  "800x600 at 60" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
>   modeline  "1024x768 at 60" 65.0 1024 1048 1184 1344 768 771 777 806 
> -vsync -hsync
>   modeline  "1280x960 at 60" 102.1 1280 1360 1496 1712 960 961 964 994 
> -hsync +vsync
>   modeline  "1280x1024 at 60" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 
> +hsync +vsync
>     Gamma    1.0
> EndSection
>
You probably want to remove the modelines, your panel should advertise 
them automatically. Horizsync, Vertrefresh and Gamma too.

> Section "Screen"
>     Identifier    "Default Screen"
>     Device        "Generic Video Card"
>     Monitor        "Generic Monitor"
>     Defaultdepth    24
>     SubSection "Display"
>         Depth    24
>         Virtual    1280    1024
>         Modes        "1024x768 at 60"    "1280x960 at 60"    "800x600 at 60"    " 
> 1280x1024 at 60"    "800x600 at 56"    "640x480 at 60"
>     EndSubSection
> EndSection
> 
Change the added modes above for the standard modes, 1024x768, 1280x960, 
etc...

> Section "Module"
>     Load        "glx"
>     Load        "GLcore"
>     Load        "v4l"
> EndSection

This is still missing the Load "dri" line.

Regards,
Xavier