[Openchrome-users] help getting 16:9 resolutions?

[John Stile]

On Sat, 2008-01-19 at 00:38 +0100, Benno Schulenberg wrote: 
> Use trunk instead.

Right On!  Oh that's nice now! Thank you.
Checkout At revision 516.

I don't know if details are important to this list, but I hate finding a
thread about my driver & hardware, only to find no details.
Stop reading now if not interested.

I downloaded the ebuild from a site that is gone now.
so I placed ebuild file here: http://pastebin.ca/862351

I created my overlay area:
mkdir -p /usr/local/portage/x11-drivers/xf86-video-openchrome

Added to make.conf
echo 'PORTDIR_OVERLAY="${PORTDIR_OVERLAY} /usr/local/portage"' >>make.conf

Unmasked.
echo 'x11-drivers/xf86-video-openchrome **' >> /etc/portage/package.keywords

Installed.
emerge --update --newuse --deep -ta x11-drivers/xf86-video-openchrome

It Build successfully from trunk (At revision 516). Yay!

eix -I x11-drivers/xf86-video-openchrome

A look at what was installed 
eix -I x11-drivers/xf86-video-openchrome

[I] x11-drivers/xf86-video-openchrome [1]
     Available versions:  (-*)9999
     Installed versions:  9999(01:06:54 01/19/08)(-debug)
     Homepage:            http://www.openchrome.org
     Description:         openChrome graphics driver for VIA/S3G cards

My xorg.conf  is here: http://pastebin.ca/862389
Touch screen settings still under investigation.

Restart X
/etc/init.d/xdm restart

egrep 700 /var/log/Xorg.0.log
(**) |   |-->Monitor "Xenarc-700TSV"
(**) |   |-->Device "CX700"
        K8M800/K8N800, PM800/PM880/CN400, P4M800Pro/VN800/CN700,
        K8M890/K8N890, P4M900/VN896/CN896, CX700/VX700, P4M890
(--) Chipset CX700/VX700 found
(--) CHROME(0): Chipset: CX700/VX700
(--) CHROME(0): Detected VIA VT3324 (CX700).
(II) CHROME(0): VESA VBE OEM: VIA CX700
(II) CHROME(0): Xenarc-700TSV: Using hsync range of 31.50-37.90 kHz
(II) CHROME(0): Xenarc-700TSV: Using vrefresh range of 50.00-70.00 Hz

dmesg 
fbcondecor: console 0 using theme 'livecd-2007.0'
fbcondecor: switched decor state to 'on' on console 0
agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode

Thank you so much.