[Openicc] Profile installation and association for Linux/Unix/X11

[Kai-Uwe Behrmann]

Instructions about building Oyranos, including Elektra, are here:
https://www.oyranos.org/wiki/index.php?title=Oyranos/git

The Elektra tarball can be downloaded here:
http://www.markus-raab.org/ftp/elektra-0.7.0rc3.tar.gz

Just to remember, for setting monitor profiles exists a command line tool:
https://www.oyranos.org/wiki/index.php?title=Oyranos/Device_Profiles


kind regards
Kai-Uwe Behrmann
-- 
developing for colour management 
www.behrmann.name + www.oyranos.org


Am 30.04.08, 08:34 +0200 schrieb Tomas Carnecky:
> Graeme Gill wrote:
> > Markus Raab wrote:
> >> Unfortunately you are absolutely right. The reason is that mounting in the yet 
> >> unreleased 0.7 is a brand-new feature. But everybody is welcome to change the 
> >> situation and write backends!
> > 
> > I started looking into writing a JSON back end for Elektra 0.7,
> > so that I could see about linking in to Elektra if it's present
> > on a system, and use a common set of configuration keys with
> > Oyranos, to but didn't get very far.
> > 
> > It seems that building Elektra from source is not easy. My first attempt
> > on my Fedora Core 8 box resulted in errors such as:

> I had problems with bootstrapping it as well. Kai-Uwe advised me to 
> download an official tarball (7.0-rc? was it IIRC) which has the 
> configure script pre-generated so you don't have to run autotools. That 
> did the trick for me, after that it compiled fine.