[Piglit] [PATCH] msaa: Add a test for the GL_MULTISAMPLE enable flag.

Anuj Phogat anuj.phogat at gmail.com
Tue Jun 19 12:13:45 PDT 2012


On Tue, Jun 19, 2012 at 7:45 AM, Paul Berry <stereotype441 at gmail.com> wrote:
> ---
>  tests/all.tests                                    |    1 +
>  .../ext_framebuffer_multisample/CMakeLists.gl.txt  |    1 +
>  .../ext_framebuffer_multisample/enable-flag.cpp    |  149 ++++++++++++++++++++
>  3 files changed, 151 insertions(+), 0 deletions(-)
>  create mode 100644 tests/spec/ext_framebuffer_multisample/enable-flag.cpp
>
> diff --git a/tests/all.tests b/tests/all.tests
> index 42804a7..39b0e9b 100644
> --- a/tests/all.tests
> +++ b/tests/all.tests
> @@ -1325,6 +1325,7 @@ ext_framebuffer_multisample['blit-mismatched-samples'] = concurrent_test('ext_fr
>  ext_framebuffer_multisample['blit-mismatched-sizes'] = concurrent_test('ext_framebuffer_multisample-blit-mismatched-sizes')
>  ext_framebuffer_multisample['blit-mismatched-formats'] = concurrent_test('ext_framebuffer_multisample-blit-mismatched-formats')
>  ext_framebuffer_multisample['dlist'] = concurrent_test('ext_framebuffer_multisample-dlist')
> +ext_framebuffer_multisample['enable-flag'] = PlainExecTest('ext_framebuffer_multisample-enable-flag -auto')
>  ext_framebuffer_multisample['minmax'] = concurrent_test('ext_framebuffer_multisample-minmax')
>  ext_framebuffer_multisample['negative-copypixels'] = concurrent_test('ext_framebuffer_multisample-negative-copypixels')
>  ext_framebuffer_multisample['negative-copyteximage'] = concurrent_test('ext_framebuffer_multisample-negative-copyteximage')
> diff --git a/tests/spec/ext_framebuffer_multisample/CMakeLists.gl.txt b/tests/spec/ext_framebuffer_multisample/CMakeLists.gl.txt
> index 073aec0..b9deef0 100644
> --- a/tests/spec/ext_framebuffer_multisample/CMakeLists.gl.txt
> +++ b/tests/spec/ext_framebuffer_multisample/CMakeLists.gl.txt
> @@ -15,6 +15,7 @@ piglit_add_executable (ext_framebuffer_multisample-blit-mismatched-sizes common.
>  piglit_add_executable (ext_framebuffer_multisample-blit-mismatched-formats common.cpp blit-mismatched-formats.cpp)
>  piglit_add_executable (ext_framebuffer_multisample-clip-and-scissor-blit common.cpp clip-and-scissor-blit.cpp)
>  piglit_add_executable (ext_framebuffer_multisample-dlist dlist.c)
> +piglit_add_executable (ext_framebuffer_multisample-enable-flag enable-flag.cpp common.cpp)
>  piglit_add_executable (ext_framebuffer_multisample-formats common.cpp formats.cpp)
>  piglit_add_executable (ext_framebuffer_multisample-line-smooth common.cpp line-smooth.cpp)
>  piglit_add_executable (ext_framebuffer_multisample-minmax minmax.c)
> diff --git a/tests/spec/ext_framebuffer_multisample/enable-flag.cpp b/tests/spec/ext_framebuffer_multisample/enable-flag.cpp
> new file mode 100644
> index 0000000..4d88390
> --- /dev/null
> +++ b/tests/spec/ext_framebuffer_multisample/enable-flag.cpp
> @@ -0,0 +1,149 @@
> +/*
> + * Copyright © 2012 Intel Corporation
> + *
> + * Permission is hereby granted, free of charge, to any person obtaining a
> + * copy of this software and associated documentation files (the "Software"),
> + * to deal in the Software without restriction, including without limitation
> + * the rights to use, copy, modify, merge, publish, distribute, sublicense,
> + * and/or sell copies of the Software, and to permit persons to whom the
> + * Software is furnished to do so, subject to the following conditions:
> + *
> + * The above copyright notice and this permission notice (including the next
> + * paragraph) shall be included in all copies or substantial portions of the
> + * Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
> + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
> + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
> + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
> + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
> + * IN THE SOFTWARE.
> + */
> +
> +/**
> + * \file enable-flag.cpp
> + *
> + * This test verifies the proper functioning of the GL_MULTISAMPLE
> + * flag.  From the GL 3.0 spec (p.116):
> + *
> + *     "Multisample rasterization is enabled or disabled by calling
> + *     Enable or Disable with the symbolic constant MULTISAMPLE."
> + *
> + * Elsewhere in the spec, where multisample rasterization is described
> + * (sections 3.4.3, 3.5.4, and 3.6.6), the following text is
> + * consistently used:
> + *
> + *     "If MULTISAMPLE is enabled, and the value of SAMPLE_BUFFERS is
> + *     one, then..."
> + *
> + * So, in other words, disabling GL_MULTISAMPLE should prevent
> + * multisample rasterization from occurring, even if the draw
> + * framebuffer is multisampled.
> + *
> + *
> + * This test operates by performing the following operations:
> + *
> + * 1. Verify that the default state of GL_MULTISAMPLE is enabled.
> + *
> + * 2. Draw a test image into a multisampled buffer, with
> + *    GL_MULTISAMPLE disabled.
> + *
> + * 3. Blit this image to the left half of the piglit window (which is
> + *    not multisampled) to resolve it.
> + *
> + * 4. Draw the same test image into a single-sampled buffer.
> + *
> + * 5. Blit this image to the right half of the piglit window.
> + *
> + * 6. Verify that the two halves of the piglit window match.  If they
> + *    don't, then presumably the disabling of GL_MULTISAMPLE failed to
> + *    take effect.
> + */
> +
> +#include "common.h"
> +
> +int piglit_width = 512; int piglit_height = 256;
> +int piglit_window_mode = GLUT_DOUBLE | GLUT_RGBA | GLUT_ALPHA;
> +
> +namespace {
> +
> +const int pattern_width = 256; const int pattern_height = 256;
> +
> +Fbo singlesampled_fbo;
> +Fbo multisampled_fbo;
> +Triangles triangles;
> +
> +extern "C" void
> +piglit_init(int argc, char **argv)
> +{
> +       piglit_require_gl_version(30);
> +
> +       GLint max_samples;
> +       glGetIntegerv(GL_MAX_SAMPLES, &max_samples);
> +
> +       singlesampled_fbo.setup(FboConfig(0, pattern_width,
> +                                         pattern_height));
> +       multisampled_fbo.setup(FboConfig(max_samples, pattern_width,
> +                                        pattern_height));
> +       triangles.compile();
> +}
> +
> +extern "C" enum piglit_result
> +piglit_display()
> +{
> +       bool pass = true;
> +
> +       glBindFramebuffer(GL_DRAW_FRAMEBUFFER, 0);
> +       glViewport(0, 0, piglit_width, piglit_height);
> +       glClear(GL_COLOR_BUFFER_BIT);
> +
> +       /* Verify that the default state of GL_MULTISAMPLE is
> +        * enabled.
> +        */
> +       pass = glIsEnabled(GL_MULTISAMPLE) && pass;
> +
> +       /* Draw a test image into a multisampled buffer, with
> +        * GL_MULTISAMPLE disabled.
> +        */
> +       glBindFramebuffer(GL_DRAW_FRAMEBUFFER, multisampled_fbo.handle);
> +       multisampled_fbo.set_viewport();
> +       glDisable(GL_MULTISAMPLE);
> +       triangles.draw(TestPattern::no_projection);
> +       glEnable(GL_MULTISAMPLE);
> +
> +       /* Blit this image to the left half of the piglit window
> +        * (which is not multisampled) to resolve it.
> +        */
> +       glBindFramebuffer(GL_READ_FRAMEBUFFER, multisampled_fbo.handle);
> +       glBindFramebuffer(GL_DRAW_FRAMEBUFFER, 0);
> +       glBlitFramebuffer(0, 0, pattern_width, pattern_height,
> +                         0, 0, pattern_width, pattern_height,
> +                         GL_COLOR_BUFFER_BIT, GL_NEAREST);
> +
> +       /* Draw the same test image into a single-sampled buffer. */
> +       glBindFramebuffer(GL_DRAW_FRAMEBUFFER, singlesampled_fbo.handle);
> +       singlesampled_fbo.set_viewport();
> +       triangles.draw(TestPattern::no_projection);
> +
> +       /* Blit this image to the right half of the piglit window. */
> +       glBindFramebuffer(GL_READ_FRAMEBUFFER, singlesampled_fbo.handle);
> +       glBindFramebuffer(GL_DRAW_FRAMEBUFFER, 0);
> +       glBlitFramebuffer(0, 0, pattern_width, pattern_height,
> +                         pattern_width, 0, 2*pattern_width, pattern_height,
> +                         GL_COLOR_BUFFER_BIT, GL_NEAREST);
> +
> +       /* Verify that the two halves of the piglit window match.  If
> +        * they don't, then presumably the disabling of GL_MULTISAMPLE
> +        * failed to take effect.
> +        */
> +       glBindFramebuffer(GL_READ_FRAMEBUFFER, 0);
> +       pass = piglit_probe_rect_halves_equal_rgba(0, 0, 2*pattern_width,
> +                                                  pattern_height) && pass;
> +
> +       piglit_present_results();
> +
> +       return pass ? PIGLIT_PASS : PIGLIT_FAIL;
> +}
> +
> +} /* Anonymous namespace */
> --
> 1.7.7.6
>

LGTM.
Reviewed-by: Anuj Phogat <anuj.phogat at gmail.com>


More information about the Piglit mailing list