[Piglit] issue with waffle

[Perez Rodriguez, Humberto I]

Hi  :

I am trying to run piglit on SKL-Y with ubuntu 14.04.03 but when ran waffle always got the following error :

cd waffle   --> [ok]
cmake .     --> [ok]
make        --> [ok]
make check  --> [ok]
make check-func   --> [fail]


[ 50%] Built target gl_basic_test
Scanning dependencies of target gl_basic_test_run
test: pass:   gl_basic.glx_init
libGL error: pci id for fd 4: 8086:191e, driver (null)
i965_dri.so does not support the 0x191e PCI ID.
libGL error: failed to create dri screen
libGL error: failed to load driver: i965
test: pass:   gl_basic.glx_gl_rgb
libGL error: pci id for fd 4: 8086:191e, driver (null)
i965_dri.so does not support the 0x191e PCI ID.
libGL error: failed to create dri screen
libGL error: failed to load driver: i965
test: pass:   gl_basic.glx_gl_rgba
libGL error: pci id for fd 4: 8086:191e, driver (null)
i965_dri.so does not support the 0x191e PCI ID.


I build mesa from the source with the following parameters :

./autogen.sh --prefix=/opt/X11R7 --libdir=/opt/X11R7/lib --with-dri-driverdir=/opt/X11R7/lib/dri --with-dri-drivers="i915 i965 swrast" --enable-gles1 --enable-gles2  --enable-shared-glapi --with-egl-platforms=x11,drm,wayland --enable-texture-float --enable-gbm --enable-glx-tls --enable-dri3 --without-gallium-drivers


My configuration is :
Platform : SKL-Y
Ubuntu 14.04.03
Primary display : eDP 3200x1800



I share with you a part of dmesg output

rm:drm_mode_debug_printmodeline] Modeline 37:"3200x1800" 48 361310 3200 3248 3280 3680 1800 1802 1807 2045 0x40 0xa
[   42.340235] [drm:drm_mode_getconnector] [CONNECTOR:35:?]
[   42.340332] [drm:drm_mode_getconnector] [CONNECTOR:44:?]
[   42.340334] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:44:DP-1]
[   42.340335] [drm:intel_dp_detect] [CONNECTOR:44:DP-1]
[   42.340336] [drm:intel_display_power_get] enabling power well 2
[   42.340338] [drm:skl_disable_dc6] Disabling DC6
[   42.340351] [drm:skl_set_power_well] Enabling power well 2
[   42.340356] [drm:intel_display_power_get] enabling DDI B power well
[   42.340358] [drm:skl_set_power_well] Enabling DDI B power well
[   42.340375] [drm:intel_display_power_put] disabling DDI B power well
[   42.340377] [drm:skl_set_power_well] Disabling DDI B power well
[   42.340378] [drm:intel_display_power_put] disabling power well 2
[   42.340381] [drm:skl_set_power_well] Disabling power well 2
[   42.340384] [drm:skl_enable_dc6] Enabling DC6
[   42.340386] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:44:DP-1] disconnected
[   42.340390] [drm:drm_mode_getconnector] [CONNECTOR:48:?]
[   42.340391] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:48:HDMI-A-1]
[   42.340392] [drm:intel_hdmi_detect] [CONNECTOR:48:HDMI-A-1]
[   42.340394] [drm:intel_display_power_get] enabling power well 2
[   42.340396] [drm:skl_disable_dc6] Disabling DC6
[   42.340408] [drm:skl_set_power_well] Enabling power well 2
[   42.340412] [drm:intel_display_power_get] enabling DDI B power well
[   42.340414] [drm:skl_set_power_well] Enabling DDI B power well
[   42.340701] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
[   42.340702] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK on first message, retry
[   42.340983] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
[   42.340984] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
[   42.340986] [drm:intel_display_power_put] disabling DDI B power well
[   42.340987] [drm:skl_set_power_well] Disabling DDI B power well
[   42.340988] [drm:intel_display_power_put] disabling power well 2
[   42.340990] [drm:skl_set_power_well] Disabling power well 2
[   42.340991] [drm:skl_enable_dc6] Enabling DC6


Other useful information :

$ lsmod | grep i915
i915                 1105920  3
drm_kms_helper        126976  1 i915
drm                   356352  4 i915,drm_kms_helper
i2c_algo_bit           16384  1 i915
video                  36864  1 i915


$ glxinfo | grep VGA
libGL: screen 0 does not appear to be DRI3 capable
libGL: pci id for fd 4: 8086:191e, driver i965
libGL: OpenDriver: trying /opt/X11R7/lib/dri/tls/i965_dri.so
i965_dri.so does not support the 0x191e PCI ID.
libGL error: failed to create dri screen
libGL error: failed to load driver: i965
libGL: OpenDriver: trying /opt/X11R7/lib/dri/tls/swrast_dri.so






Can you help me to resolve this issue ?

Thanks in advance

[cid:image001.png at 01CF8BAC.3B4C5DD0]

Humberto Perez
OTC Linux Graphics
OpenSource Technology Center
iNet 8-645-2968
Before printing this email, consider your Environmental Responsibility!



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freedesktop.org/archives/piglit/attachments/20150918/6e9ccaae/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.png
Type: image/png
Size: 4914 bytes
Desc: image001.png
URL: <http://lists.freedesktop.org/archives/piglit/attachments/20150918/6e9ccaae/attachment-0001.png>