[Piglit] [PATCH 7/7] arb_enhanced_layouts: More multiple layout qualifiers in a single declaration tests
Timothy Arceri
timothy.arceri at collabora.com
Mon Oct 24 00:56:03 UTC 2016
On Sat, 2016-10-22 at 23:42 +0300, Andres Gomez wrote:
> Added tests for the layout-qualifier-names "max_vertices",
> "invocations", "vertices", "local_size_[x|y|z]" and "xfb_stride"
> which
> may have redeclarations but all of them enforce that a global or
> variable redeclaration holds the same value than in the previous
> declaration(s).
>
> These tests check that multiple appearances of the same
> layout-qualifier-name across multiple layout-qualifiers in the same
> declaration with different values won't trigger a compile/link error.
>
> From the ARB_enhanced_layouts spec:
>
> "More than one layout qualifier may appear in a single
> declaration.
> Additionally, the same layout-qualifier-name can occur multiple
> times
> within a layout qualifier or across multiple layout qualifiers
> in the
> same declaration"
>
> Signed-off-by: Andres Gomez <agomez at igalia.com>
> ---
> ...identifiers-in-single-declaration-mismatch.geom | 38
> +++++++++++++++++++
> ...vocation-identifiers-in-single-declaration.geom | 38
> +++++++++++++++++++
> ...identifiers-in-single-declaration-mismatch.comp | 38
> +++++++++++++++++++
> ...cal_size-identifiers-in-single-declaration.comp | 38
> +++++++++++++++++++
> ...identifiers-in-single-declaration-mismatch.geom | 40
> ++++++++++++++++++++
> ...vertices-identifiers-in-single-declaration.geom | 40
> ++++++++++++++++++++
> ...identifiers-in-single-declaration-mismatch.tesc | 39
> +++++++++++++++++++
> ...vertices-identifiers-in-single-declaration.tesc | 39
> +++++++++++++++++++
> ...identifiers-in-single-declaration-mismatch.vert | 41
> ++++++++++++++++++++
> ...k-global-identifiers-in-single-declaration.vert | 41
> ++++++++++++++++++++
> ...identifiers-in-single-declaration-mismatch.vert | 44
> ++++++++++++++++++++++
> ...de-block-identifiers-in-single-declaration.vert | 44
> ++++++++++++++++++++++
> ...identifiers-in-single-declaration-mismatch.vert | 37
> ++++++++++++++++++
> ...e-global-identifiers-in-single-declaration.vert | 37
> ++++++++++++++++++
> ...identifiers-in-single-declaration-mismatch.vert | 41
> ++++++++++++++++++++
> ...k-global-identifiers-in-single-declaration.vert | 41
> ++++++++++++++++++++
> ...identifiers-in-single-declaration-mismatch.vert | 44
> ++++++++++++++++++++++
> ...medblock-identifiers-in-single-declaration.vert | 44
> ++++++++++++++++++++++
> ...identifiers-in-single-declaration-mismatch.vert | 39
> +++++++++++++++++++
> ...e-global-identifiers-in-single-declaration.vert | 39
> +++++++++++++++++++
> ...identifiers-in-single-declaration-mismatch.vert | 39
> +++++++++++++++++++
> ...variable-identifiers-in-single-declaration.vert | 39
> +++++++++++++++++++
> 22 files changed, 880 insertions(+)
> create mode 100644
> tests/spec/arb_enhanced_layouts/compiler/duplicate-layout-qualifier-
> identifiers/multiple-invocation-identifiers-in-single-declaration-
> mismatch.geom
> create mode 100644
> tests/spec/arb_enhanced_layouts/compiler/duplicate-layout-qualifier-
> identifiers/multiple-invocation-identifiers-in-single-
> declaration.geom
> create mode 100644
> tests/spec/arb_enhanced_layouts/compiler/duplicate-layout-qualifier-
> identifiers/multiple-local_size-identifiers-in-single-declaration-
> mismatch.comp
> create mode 100644
> tests/spec/arb_enhanced_layouts/compiler/duplicate-layout-qualifier-
> identifiers/multiple-local_size-identifiers-in-single-
> declaration.comp
> create mode 100644
> tests/spec/arb_enhanced_layouts/compiler/duplicate-layout-qualifier-
> identifiers/multiple-max_vertices-identifiers-in-single-declaration-
> mismatch.geom
> create mode 100644
> tests/spec/arb_enhanced_layouts/compiler/duplicate-layout-qualifier-
> identifiers/multiple-max_vertices-identifiers-in-single-
> declaration.geom
> create mode 100644
> tests/spec/arb_enhanced_layouts/compiler/duplicate-layout-qualifier-
> identifiers/multiple-vertices-identifiers-in-single-declaration-
> mismatch.tesc
> create mode 100644
> tests/spec/arb_enhanced_layouts/compiler/duplicate-layout-qualifier-
> identifiers/multiple-vertices-identifiers-in-single-declaration.tesc
> create mode 100644
> tests/spec/arb_enhanced_layouts/compiler/duplicate-layout-qualifier-
> identifiers/multiple-xfb_stride-block-global-identifiers-in-single-
> declaration-mismatch.vert
> create mode 100644
> tests/spec/arb_enhanced_layouts/compiler/duplicate-layout-qualifier-
> identifiers/multiple-xfb_stride-block-global-identifiers-in-single-
> declaration.vert
> create mode 100644
> tests/spec/arb_enhanced_layouts/compiler/duplicate-layout-qualifier-
> identifiers/multiple-xfb_stride-block-identifiers-in-single-
> declaration-mismatch.vert
> create mode 100644
> tests/spec/arb_enhanced_layouts/compiler/duplicate-layout-qualifier-
> identifiers/multiple-xfb_stride-block-identifiers-in-single-
> declaration.vert
> create mode 100644
> tests/spec/arb_enhanced_layouts/compiler/duplicate-layout-qualifier-
> identifiers/multiple-xfb_stride-global-identifiers-in-single-
> declaration-mismatch.vert
> create mode 100644
> tests/spec/arb_enhanced_layouts/compiler/duplicate-layout-qualifier-
> identifiers/multiple-xfb_stride-global-identifiers-in-single-
> declaration.vert
> create mode 100644
> tests/spec/arb_enhanced_layouts/compiler/duplicate-layout-qualifier-
> identifiers/multiple-xfb_stride-namedblock-global-identifiers-in-
> single-declaration-mismatch.vert
> create mode 100644
> tests/spec/arb_enhanced_layouts/compiler/duplicate-layout-qualifier-
> identifiers/multiple-xfb_stride-namedblock-global-identifiers-in-
> single-declaration.vert
> create mode 100644
> tests/spec/arb_enhanced_layouts/compiler/duplicate-layout-qualifier-
> identifiers/multiple-xfb_stride-namedblock-identifiers-in-single-
> declaration-mismatch.vert
> create mode 100644
> tests/spec/arb_enhanced_layouts/compiler/duplicate-layout-qualifier-
> identifiers/multiple-xfb_stride-namedblock-identifiers-in-single-
> declaration.vert
> create mode 100644
> tests/spec/arb_enhanced_layouts/compiler/duplicate-layout-qualifier-
> identifiers/multiple-xfb_stride-variable-global-identifiers-in-
> single-declaration-mismatch.vert
> create mode 100644
> tests/spec/arb_enhanced_layouts/compiler/duplicate-layout-qualifier-
> identifiers/multiple-xfb_stride-variable-global-identifiers-in-
> single-declaration.vert
> create mode 100644
> tests/spec/arb_enhanced_layouts/compiler/duplicate-layout-qualifier-
> identifiers/multiple-xfb_stride-variable-identifiers-in-single-
> declaration-mismatch.vert
> create mode 100644
> tests/spec/arb_enhanced_layouts/compiler/duplicate-layout-qualifier-
> identifiers/multiple-xfb_stride-variable-identifiers-in-single-
> declaration.vert
>
> diff --git a/tests/spec/arb_enhanced_layouts/compiler/duplicate-
> layout-qualifier-identifiers/multiple-invocation-identifiers-in-
> single-declaration-mismatch.geom
> b/tests/spec/arb_enhanced_layouts/compiler/duplicate-layout-
> qualifier-identifiers/multiple-invocation-identifiers-in-single-
> declaration-mismatch.geom
> new file mode 100644
> index 0000000..1d9ed39
> --- /dev/null
> +++ b/tests/spec/arb_enhanced_layouts/compiler/duplicate-layout-
> qualifier-identifiers/multiple-invocation-identifiers-in-single-
> declaration-mismatch.geom
> @@ -0,0 +1,38 @@
> +// [config]
> +// expect_result: fail
> +// glsl_version: 1.50
> +// require_extensions: GL_ARB_enhanced_layouts GL_ARB_gpu_shader5
> +// check_link: false
> +// [end config]
> +//
> +// From the ARB_enhanced_layouts spec:
> +//
> +// "More than one layout qualifier may appear in a single
> declaration.
> +// Additionally, the same layout-qualifier-name can occur
> multiple times
> +// within a layout qualifier or across multiple layout
> qualifiers in the
> +// same declaration. When the same layout-qualifier-name occurs
> +// multiple times, in a single declaration, the last occurrence
> overrides
> +// the former occurrence(s). Further, if such a layout-
> qualifier-name
> +// will effect subsequent declarations or other observable
> behavior, it
> +// is only the last occurrence that will have any effect,
> behaving as if
> +// the earlier occurrence(s) within the declaration are not
> present.
> +// This is also true for overriding layout-qualifier-names,
> where one
> +// overrides the other (e.g., row_major vs. column_major); only
> the last
> +// occurrence has any effect."
> +//
> +// From the ARB_gpu_shader5 spec:
> +//
> +// "If an invocation count is declared, all such declarations
> must
> +// specify the same count."
> +
> +#version 150
> +#extension GL_ARB_enhanced_layouts: enable
> +#extension GL_ARB_gpu_shader5 : enable
> +
> +layout(points, invocations=4) layout(invocations=3) in;
> +layout(invocations=4) in;
> +layout(triangle_strip, max_vertices=3) out;
> +
> +void main()
> +{
> +}
> diff --git a/tests/spec/arb_enhanced_layouts/compiler/duplicate-
> layout-qualifier-identifiers/multiple-invocation-identifiers-in-
> single-declaration.geom
> b/tests/spec/arb_enhanced_layouts/compiler/duplicate-layout-
> qualifier-identifiers/multiple-invocation-identifiers-in-single-
> declaration.geom
> new file mode 100644
> index 0000000..4a5c9b4
> --- /dev/null
> +++ b/tests/spec/arb_enhanced_layouts/compiler/duplicate-layout-
> qualifier-identifiers/multiple-invocation-identifiers-in-single-
> declaration.geom
> @@ -0,0 +1,38 @@
> +// [config]
> +// expect_result: pass
> +// glsl_version: 1.50
> +// require_extensions: GL_ARB_enhanced_layouts GL_ARB_gpu_shader5
> +// check_link: false
> +// [end config]
> +//
> +// From the ARB_enhanced_layouts spec:
> +//
> +// "More than one layout qualifier may appear in a single
> declaration.
> +// Additionally, the same layout-qualifier-name can occur
> multiple times
> +// within a layout qualifier or across multiple layout
> qualifiers in the
> +// same declaration. When the same layout-qualifier-name occurs
> +// multiple times, in a single declaration, the last occurrence
> overrides
> +// the former occurrence(s). Further, if such a layout-
> qualifier-name
> +// will effect subsequent declarations or other observable
> behavior, it
> +// is only the last occurrence that will have any effect,
> behaving as if
> +// the earlier occurrence(s) within the declaration are not
> present.
> +// This is also true for overriding layout-qualifier-names,
> where one
> +// overrides the other (e.g., row_major vs. column_major); only
> the last
> +// occurrence has any effect."
> +//
> +// From the ARB_gpu_shader5 spec:
> +//
> +// "If an invocation count is declared, all such declarations
> must
> +// specify the same count."
> +
> +#version 150
> +#extension GL_ARB_enhanced_layouts: enable
> +#extension GL_ARB_gpu_shader5 : enable
> +
> +layout(points, invocations=3) layout(invocations=4) in;
> +layout(invocations=4) in;
> +layout(triangle_strip, max_vertices=3) out;
> +
> +void main()
> +{
> +}
> diff --git a/tests/spec/arb_enhanced_layouts/compiler/duplicate-
> layout-qualifier-identifiers/multiple-local_size-identifiers-in-
> single-declaration-mismatch.comp
> b/tests/spec/arb_enhanced_layouts/compiler/duplicate-layout-
> qualifier-identifiers/multiple-local_size-identifiers-in-single-
> declaration-mismatch.comp
> new file mode 100644
> index 0000000..97728e0
> --- /dev/null
> +++ b/tests/spec/arb_enhanced_layouts/compiler/duplicate-layout-
> qualifier-identifiers/multiple-local_size-identifiers-in-single-
> declaration-mismatch.comp
> @@ -0,0 +1,38 @@
> +// [config]
> +// expect_result: fail
> +// glsl_version: 1.50
> +// require_extensions: GL_ARB_enhanced_layouts GL_ARB_compute_shader
> +// check_link: true
Again it should be a compile time error so I think you need to remove
this.
These tests all seem fine but as mentioned I believe you need to add
ARB_shading_language_420pack as a requirement.
> +// [end config]
> +//
> +// From the ARB_enhanced_layouts spec:
> +//
> +// "More than one layout qualifier may appear in a single
> declaration.
> +// Additionally, the same layout-qualifier-name can occur
> multiple times
> +// within a layout qualifier or across multiple layout
> qualifiers in the
> +// same declaration. When the same layout-qualifier-name occurs
> +// multiple times, in a single declaration, the last occurrence
> overrides
> +// the former occurrence(s). Further, if such a layout-
> qualifier-name
> +// will effect subsequent declarations or other observable
> behavior, it
> +// is only the last occurrence that will have any effect,
> behaving as if
> +// the earlier occurrence(s) within the declaration are not
> present.
> +// This is also true for overriding layout-qualifier-names,
> where one
> +// overrides the other (e.g., row_major vs. column_major); only
> the last
> +// occurrence has any effect."
> +//
> +// From the ARB_compute_shader spec:
> +//
> +// "[If an input layout qualifier] is declared more than once in
> +// the same shader, all those declarations must indicate the
> same
> +// local work-group size; otherwise a compile-time error
> results."
> +
> +#version 150
> +#extension GL_ARB_enhanced_layouts: enable
> +#extension GL_ARB_compute_shader: enable
> +
> +layout(local_size_z = 2) layout(local_size_z = 1) in;
> +layout(local_size_z = 2) in;
> +
> +void main()
> +{
> +}
> diff --git a/tests/spec/arb_enhanced_layouts/compiler/duplicate-
> layout-qualifier-identifiers/multiple-local_size-identifiers-in-
> single-declaration.comp
> b/tests/spec/arb_enhanced_layouts/compiler/duplicate-layout-
> qualifier-identifiers/multiple-local_size-identifiers-in-single-
> declaration.comp
> new file mode 100644
> index 0000000..db7982c
> --- /dev/null
> +++ b/tests/spec/arb_enhanced_layouts/compiler/duplicate-layout-
> qualifier-identifiers/multiple-local_size-identifiers-in-single-
> declaration.comp
> @@ -0,0 +1,38 @@
> +// [config]
> +// expect_result: pass
> +// glsl_version: 1.50
> +// require_extensions: GL_ARB_enhanced_layouts GL_ARB_compute_shader
> +// check_link: true
> +// [end config]
> +//
> +// From the ARB_enhanced_layouts spec:
> +//
> +// "More than one layout qualifier may appear in a single
> declaration.
> +// Additionally, the same layout-qualifier-name can occur
> multiple times
> +// within a layout qualifier or across multiple layout
> qualifiers in the
> +// same declaration. When the same layout-qualifier-name occurs
> +// multiple times, in a single declaration, the last occurrence
> overrides
> +// the former occurrence(s). Further, if such a layout-
> qualifier-name
> +// will effect subsequent declarations or other observable
> behavior, it
> +// is only the last occurrence that will have any effect,
> behaving as if
> +// the earlier occurrence(s) within the declaration are not
> present.
> +// This is also true for overriding layout-qualifier-names,
> where one
> +// overrides the other (e.g., row_major vs. column_major); only
> the last
> +// occurrence has any effect."
> +//
> +// From the ARB_compute_shader spec:
> +//
> +// "[If an input layout qualifier] is declared more than once in
> +// the same shader, all those declarations must indicate the
> same
> +// local work-group size; otherwise a compile-time error
> results."
> +
> +#version 150
> +#extension GL_ARB_enhanced_layouts: enable
> +#extension GL_ARB_compute_shader: enable
> +
> +layout(local_size_z = 1) layout(local_size_z = 2) in;
> +layout(local_size_z = 2) in;
> +
> +void main()
> +{
> +}
> diff --git a/tests/spec/arb_enhanced_layouts/compiler/duplicate-
> layout-qualifier-identifiers/multiple-max_vertices-identifiers-in-
> single-declaration-mismatch.geom
> b/tests/spec/arb_enhanced_layouts/compiler/duplicate-layout-
> qualifier-identifiers/multiple-max_vertices-identifiers-in-single-
> declaration-mismatch.geom
> new file mode 100644
> index 0000000..1ab2121
> --- /dev/null
> +++ b/tests/spec/arb_enhanced_layouts/compiler/duplicate-layout-
> qualifier-identifiers/multiple-max_vertices-identifiers-in-single-
> declaration-mismatch.geom
> @@ -0,0 +1,40 @@
> +// [config]
> +// expect_result: fail
> +// glsl_version: 1.50
> +// require_extensions: GL_ARB_enhanced_layouts
> +// check_link: true
> +// [end config]
> +//
> +// From the ARB_enhanced_layouts spec:
> +//
> +// "More than one layout qualifier may appear in a single
> declaration.
> +// Additionally, the same layout-qualifier-name can occur
> multiple times
> +// within a layout qualifier or across multiple layout
> qualifiers in the
> +// same declaration. When the same layout-qualifier-name occurs
> +// multiple times, in a single declaration, the last occurrence
> overrides
> +// the former occurrence(s). Further, if such a layout-
> qualifier-name
> +// will effect subsequent declarations or other observable
> behavior, it
> +// is only the last occurrence that will have any effect,
> behaving as if
> +// the earlier occurrence(s) within the declaration are not
> present.
> +// This is also true for overriding layout-qualifier-names,
> where one
> +// overrides the other (e.g., row_major vs. column_major); only
> the last
> +// occurrence has any effect."
> +//
> +// From section 4.3.8.2(Output Layout Qualifiers) of the GLSL 1.50
> spec says:
> +//
> +// "All geometry shader output layout declarations in a program
> must declare the
> +// same layout and same value for max_vertices."
> +
> +#version 150
> +#extension GL_ARB_enhanced_layouts: enable
> +
> +layout(lines) in;
> +layout(line_strip, max_vertices=3) layout(max_vertices=2) out;
> +
> +in vec4 pos[];
> +
> +layout(max_vertices=3) out;
> +
> +void main()
> +{
> +}
> diff --git a/tests/spec/arb_enhanced_layouts/compiler/duplicate-
> layout-qualifier-identifiers/multiple-max_vertices-identifiers-in-
> single-declaration.geom
> b/tests/spec/arb_enhanced_layouts/compiler/duplicate-layout-
> qualifier-identifiers/multiple-max_vertices-identifiers-in-single-
> declaration.geom
> new file mode 100644
> index 0000000..f5b64cb
> --- /dev/null
> +++ b/tests/spec/arb_enhanced_layouts/compiler/duplicate-layout-
> qualifier-identifiers/multiple-max_vertices-identifiers-in-single-
> declaration.geom
> @@ -0,0 +1,40 @@
> +// [config]
> +// expect_result: pass
> +// glsl_version: 1.50
> +// require_extensions: GL_ARB_enhanced_layouts
> +// check_link: true
> +// [end config]
> +//
> +// From the ARB_enhanced_layouts spec:
> +//
> +// "More than one layout qualifier may appear in a single
> declaration.
> +// Additionally, the same layout-qualifier-name can occur
> multiple times
> +// within a layout qualifier or across multiple layout
> qualifiers in the
> +// same declaration. When the same layout-qualifier-name occurs
> +// multiple times, in a single declaration, the last occurrence
> overrides
> +// the former occurrence(s). Further, if such a layout-
> qualifier-name
> +// will effect subsequent declarations or other observable
> behavior, it
> +// is only the last occurrence that will have any effect,
> behaving as if
> +// the earlier occurrence(s) within the declaration are not
> present.
> +// This is also true for overriding layout-qualifier-names,
> where one
> +// overrides the other (e.g., row_major vs. column_major); only
> the last
> +// occurrence has any effect."
> +//
> +// From section 4.3.8.2(Output Layout Qualifiers) of the GLSL 1.50
> spec says:
> +//
> +// "All geometry shader output layout declarations in a program
> must declare the
> +// same layout and same value for max_vertices."
> +
> +#version 150
> +#extension GL_ARB_enhanced_layouts: enable
> +
> +layout(lines) in;
> +layout(line_strip, max_vertices=2) layout(max_vertices=3) out;
> +
> +in vec4 pos[];
> +
> +layout(max_vertices=3) out;
> +
> +void main()
> +{
> +}
> diff --git a/tests/spec/arb_enhanced_layouts/compiler/duplicate-
> layout-qualifier-identifiers/multiple-vertices-identifiers-in-single-
> declaration-mismatch.tesc
> b/tests/spec/arb_enhanced_layouts/compiler/duplicate-layout-
> qualifier-identifiers/multiple-vertices-identifiers-in-single-
> declaration-mismatch.tesc
> new file mode 100644
> index 0000000..610e374
> --- /dev/null
> +++ b/tests/spec/arb_enhanced_layouts/compiler/duplicate-layout-
> qualifier-identifiers/multiple-vertices-identifiers-in-single-
> declaration-mismatch.tesc
> @@ -0,0 +1,39 @@
> +// [config]
> +// expect_result: fail
> +// glsl_version: 1.50
> +// require_extensions: GL_ARB_enhanced_layouts GL_ARB_compute_shader
> +// check_link: true
> +// [end config]
> +//
> +// From the ARB_enhanced_layouts spec:
> +//
> +// "More than one layout qualifier may appear in a single
> declaration.
> +// Additionally, the same layout-qualifier-name can occur
> multiple times
> +// within a layout qualifier or across multiple layout
> qualifiers in the
> +// same declaration. When the same layout-qualifier-name occurs
> +// multiple times, in a single declaration, the last occurrence
> overrides
> +// the former occurrence(s). Further, if such a layout-
> qualifier-name
> +// will effect subsequent declarations or other observable
> behavior, it
> +// is only the last occurrence that will have any effect,
> behaving as if
> +// the earlier occurrence(s) within the declaration are not
> present.
> +// This is also true for overriding layout-qualifier-names,
> where one
> +// overrides the other (e.g., row_major vs. column_major); only
> the last
> +// occurrence has any effect."
> +//
> +// From the ARB_tessellation_shader spec:
> +//
> +// "All tessellation control shader layout declarations in a
> program must
> +// specify the same output patch vertex count."
> +
> +#version 150
> +#extension GL_ARB_enhanced_layouts: enable
> +#extension GL_ARB_tessellation_shader: require
> +
> +layout(vertices = 3) layout(vertices = 4) out;
> +layout(vertices = 3) out;
> +
> +void main() {
> + gl_out[gl_InvocationID].gl_Position = vec4(0.0);
> + gl_TessLevelOuter = float[4](1.0, 1.0, 1.0, 1.0);
> + gl_TessLevelInner = float[2](1.0, 1.0);
> +}
> diff --git a/tests/spec/arb_enhanced_layouts/compiler/duplicate-
> layout-qualifier-identifiers/multiple-vertices-identifiers-in-single-
> declaration.tesc
> b/tests/spec/arb_enhanced_layouts/compiler/duplicate-layout-
> qualifier-identifiers/multiple-vertices-identifiers-in-single-
> declaration.tesc
> new file mode 100644
> index 0000000..b3b5cf9
> --- /dev/null
> +++ b/tests/spec/arb_enhanced_layouts/compiler/duplicate-layout-
> qualifier-identifiers/multiple-vertices-identifiers-in-single-
> declaration.tesc
> @@ -0,0 +1,39 @@
> +// [config]
> +// expect_result: pass
> +// glsl_version: 1.50
> +// require_extensions: GL_ARB_enhanced_layouts
> GL_ARB_tessellation_shader
> +// check_link: true
> +// [end config]
> +//
> +// From the ARB_enhanced_layouts spec:
> +//
> +// "More than one layout qualifier may appear in a single
> declaration.
> +// Additionally, the same layout-qualifier-name can occur
> multiple times
> +// within a layout qualifier or across multiple layout
> qualifiers in the
> +// same declaration. When the same layout-qualifier-name occurs
> +// multiple times, in a single declaration, the last occurrence
> overrides
> +// the former occurrence(s). Further, if such a layout-
> qualifier-name
> +// will effect subsequent declarations or other observable
> behavior, it
> +// is only the last occurrence that will have any effect,
> behaving as if
> +// the earlier occurrence(s) within the declaration are not
> present.
> +// This is also true for overriding layout-qualifier-names,
> where one
> +// overrides the other (e.g., row_major vs. column_major); only
> the last
> +// occurrence has any effect."
> +//
> +// From the ARB_tessellation_shader spec:
> +//
> +// "All tessellation control shader layout declarations in a
> program must
> +// specify the same output patch vertex count."
> +
> +#version 150
> +#extension GL_ARB_enhanced_layouts: enable
> +#extension GL_ARB_tessellation_shader: require
> +
> +layout(vertices = 4) layout(vertices = 3) out;
> +layout(vertices = 3) out;
> +
> +void main() {
> + gl_out[gl_InvocationID].gl_Position = vec4(0.0);
> + gl_TessLevelOuter = float[4](1.0, 1.0, 1.0, 1.0);
> + gl_TessLevelInner = float[2](1.0, 1.0);
> +}
> diff --git a/tests/spec/arb_enhanced_layouts/compiler/duplicate-
> layout-qualifier-identifiers/multiple-xfb_stride-block-global-
> identifiers-in-single-declaration-mismatch.vert
> b/tests/spec/arb_enhanced_layouts/compiler/duplicate-layout-
> qualifier-identifiers/multiple-xfb_stride-block-global-identifiers-
> in-single-declaration-mismatch.vert
> new file mode 100644
> index 0000000..efcca2b
> --- /dev/null
> +++ b/tests/spec/arb_enhanced_layouts/compiler/duplicate-layout-
> qualifier-identifiers/multiple-xfb_stride-block-global-identifiers-
> in-single-declaration-mismatch.vert
> @@ -0,0 +1,41 @@
> +// [config]
> +// expect_result: fail
> +// glsl_version: 1.50
> +// require_extensions: GL_ARB_enhanced_layouts
> +// check_link: true
> +// [end config]
> +//
> +// From the ARB_enhanced_layouts spec:
> +//
> +// "More than one layout qualifier may appear in a single
> declaration.
> +// Additionally, the same layout-qualifier-name can occur
> multiple times
> +// within a layout qualifier or across multiple layout
> qualifiers in the
> +// same declaration. When the same layout-qualifier-name occurs
> +// multiple times, in a single declaration, the last occurrence
> overrides
> +// the former occurrence(s). Further, if such a layout-
> qualifier-name
> +// will effect subsequent declarations or other observable
> behavior, it
> +// is only the last occurrence that will have any effect,
> behaving as if
> +// the earlier occurrence(s) within the declaration are not
> present.
> +// This is also true for overriding layout-qualifier-names,
> where one
> +// overrides the other (e.g., row_major vs. column_major); only
> the last
> +// occurrence has any effect."
> +//
> +// From the ARB_enhanced_layouts spec:
> +//
> +// "While *xfb_stride* can be declared multiple times for the
> same buffer,
> +// it is a compile-time or link-time error to have different
> values
> +// specified for the stride for the same buffer."
> +
> +#version 150
> +#extension GL_ARB_enhanced_layouts: require
> +
> +layout(xfb_stride = 20, xfb_buffer = 0) out;
> +
> +layout(xfb_stride = 20) layout(xfb_stride = 32) out block {
> + vec4 var;
> +};
> +
> +void main()
> +{
> + var = vec4(1.0);
> +}
> diff --git a/tests/spec/arb_enhanced_layouts/compiler/duplicate-
> layout-qualifier-identifiers/multiple-xfb_stride-block-global-
> identifiers-in-single-declaration.vert
> b/tests/spec/arb_enhanced_layouts/compiler/duplicate-layout-
> qualifier-identifiers/multiple-xfb_stride-block-global-identifiers-
> in-single-declaration.vert
> new file mode 100644
> index 0000000..9a1b10e
> --- /dev/null
> +++ b/tests/spec/arb_enhanced_layouts/compiler/duplicate-layout-
> qualifier-identifiers/multiple-xfb_stride-block-global-identifiers-
> in-single-declaration.vert
> @@ -0,0 +1,41 @@
> +// [config]
> +// expect_result: pass
> +// glsl_version: 1.50
> +// require_extensions: GL_ARB_enhanced_layouts
> +// check_link: true
> +// [end config]
> +//
> +// From the ARB_enhanced_layouts spec:
> +//
> +// "More than one layout qualifier may appear in a single
> declaration.
> +// Additionally, the same layout-qualifier-name can occur
> multiple times
> +// within a layout qualifier or across multiple layout
> qualifiers in the
> +// same declaration. When the same layout-qualifier-name occurs
> +// multiple times, in a single declaration, the last occurrence
> overrides
> +// the former occurrence(s). Further, if such a layout-
> qualifier-name
> +// will effect subsequent declarations or other observable
> behavior, it
> +// is only the last occurrence that will have any effect,
> behaving as if
> +// the earlier occurrence(s) within the declaration are not
> present.
> +// This is also true for overriding layout-qualifier-names,
> where one
> +// overrides the other (e.g., row_major vs. column_major); only
> the last
> +// occurrence has any effect."
> +//
> +// From the ARB_enhanced_layouts spec:
> +//
> +// "While *xfb_stride* can be declared multiple times for the
> same buffer,
> +// it is a compile-time or link-time error to have different
> values
> +// specified for the stride for the same buffer."
> +
> +#version 150
> +#extension GL_ARB_enhanced_layouts: require
> +
> +layout(xfb_stride = 20, xfb_buffer = 0) out;
> +
> +layout(xfb_stride = 32) layout(xfb_stride = 20) out block {
> + vec4 var;
> +};
> +
> +void main()
> +{
> + var = vec4(1.0);
> +}
> diff --git a/tests/spec/arb_enhanced_layouts/compiler/duplicate-
> layout-qualifier-identifiers/multiple-xfb_stride-block-identifiers-
> in-single-declaration-mismatch.vert
> b/tests/spec/arb_enhanced_layouts/compiler/duplicate-layout-
> qualifier-identifiers/multiple-xfb_stride-block-identifiers-in-
> single-declaration-mismatch.vert
> new file mode 100644
> index 0000000..0317837
> --- /dev/null
> +++ b/tests/spec/arb_enhanced_layouts/compiler/duplicate-layout-
> qualifier-identifiers/multiple-xfb_stride-block-identifiers-in-
> single-declaration-mismatch.vert
> @@ -0,0 +1,44 @@
> +// [config]
> +// expect_result: fail
> +// glsl_version: 1.50
> +// require_extensions: GL_ARB_enhanced_layouts
> +// check_link: true
> +// [end config]
> +//
> +// From the ARB_enhanced_layouts spec:
> +//
> +// "More than one layout qualifier may appear in a single
> declaration.
> +// Additionally, the same layout-qualifier-name can occur
> multiple times
> +// within a layout qualifier or across multiple layout
> qualifiers in the
> +// same declaration. When the same layout-qualifier-name occurs
> +// multiple times, in a single declaration, the last occurrence
> overrides
> +// the former occurrence(s). Further, if such a layout-
> qualifier-name
> +// will effect subsequent declarations or other observable
> behavior, it
> +// is only the last occurrence that will have any effect,
> behaving as if
> +// the earlier occurrence(s) within the declaration are not
> present.
> +// This is also true for overriding layout-qualifier-names,
> where one
> +// overrides the other (e.g., row_major vs. column_major); only
> the last
> +// occurrence has any effect."
> +//
> +// From the ARB_enhanced_layouts spec:
> +//
> +// "While *xfb_stride* can be declared multiple times for the
> same buffer,
> +// it is a compile-time or link-time error to have different
> values
> +// specified for the stride for the same buffer."
> +
> +#version 150
> +#extension GL_ARB_enhanced_layouts: require
> +
> +layout(xfb_stride = 20) layout(xfb_stride = 32) out block1 {
> + vec4 var;
> +};
> +
> +layout(xfb_buffer = 0, xfb_stride = 20) out block2 {
> + vec4 var2;
> +};
> +
> +void main()
> +{
> + var = vec4(1.0);
> + var2 = vec4(0.0);
> +}
> diff --git a/tests/spec/arb_enhanced_layouts/compiler/duplicate-
> layout-qualifier-identifiers/multiple-xfb_stride-block-identifiers-
> in-single-declaration.vert
> b/tests/spec/arb_enhanced_layouts/compiler/duplicate-layout-
> qualifier-identifiers/multiple-xfb_stride-block-identifiers-in-
> single-declaration.vert
> new file mode 100644
> index 0000000..5899e22
> --- /dev/null
> +++ b/tests/spec/arb_enhanced_layouts/compiler/duplicate-layout-
> qualifier-identifiers/multiple-xfb_stride-block-identifiers-in-
> single-declaration.vert
> @@ -0,0 +1,44 @@
> +// [config]
> +// expect_result: pass
> +// glsl_version: 1.50
> +// require_extensions: GL_ARB_enhanced_layouts
> +// check_link: true
> +// [end config]
> +//
> +// From the ARB_enhanced_layouts spec:
> +//
> +// "More than one layout qualifier may appear in a single
> declaration.
> +// Additionally, the same layout-qualifier-name can occur
> multiple times
> +// within a layout qualifier or across multiple layout
> qualifiers in the
> +// same declaration. When the same layout-qualifier-name occurs
> +// multiple times, in a single declaration, the last occurrence
> overrides
> +// the former occurrence(s). Further, if such a layout-
> qualifier-name
> +// will effect subsequent declarations or other observable
> behavior, it
> +// is only the last occurrence that will have any effect,
> behaving as if
> +// the earlier occurrence(s) within the declaration are not
> present.
> +// This is also true for overriding layout-qualifier-names,
> where one
> +// overrides the other (e.g., row_major vs. column_major); only
> the last
> +// occurrence has any effect."
> +//
> +// From the ARB_enhanced_layouts spec:
> +//
> +// "While *xfb_stride* can be declared multiple times for the
> same buffer,
> +// it is a compile-time or link-time error to have different
> values
> +// specified for the stride for the same buffer."
> +
> +#version 150
> +#extension GL_ARB_enhanced_layouts: require
> +
> +layout(xfb_stride = 32) layout(xfb_stride = 20) out block1 {
> + vec4 var;
> +};
> +
> +layout(xfb_buffer = 0, xfb_stride = 20) out block2 {
> + vec4 var2;
> +};
> +
> +void main()
> +{
> + var = vec4(1.0);
> + var2 = vec4(0.0);
> +}
> diff --git a/tests/spec/arb_enhanced_layouts/compiler/duplicate-
> layout-qualifier-identifiers/multiple-xfb_stride-global-identifiers-
> in-single-declaration-mismatch.vert
> b/tests/spec/arb_enhanced_layouts/compiler/duplicate-layout-
> qualifier-identifiers/multiple-xfb_stride-global-identifiers-in-
> single-declaration-mismatch.vert
> new file mode 100644
> index 0000000..4e2fe72
> --- /dev/null
> +++ b/tests/spec/arb_enhanced_layouts/compiler/duplicate-layout-
> qualifier-identifiers/multiple-xfb_stride-global-identifiers-in-
> single-declaration-mismatch.vert
> @@ -0,0 +1,37 @@
> +// [config]
> +// expect_result: fail
> +// glsl_version: 1.40
> +// require_extensions: GL_ARB_enhanced_layouts
> +// check_link: true
> +// [end config]
> +//
> +// From the ARB_enhanced_layouts spec:
> +//
> +// "More than one layout qualifier may appear in a single
> declaration.
> +// Additionally, the same layout-qualifier-name can occur
> multiple times
> +// within a layout qualifier or across multiple layout
> qualifiers in the
> +// same declaration. When the same layout-qualifier-name occurs
> +// multiple times, in a single declaration, the last occurrence
> overrides
> +// the former occurrence(s). Further, if such a layout-
> qualifier-name
> +// will effect subsequent declarations or other observable
> behavior, it
> +// is only the last occurrence that will have any effect,
> behaving as if
> +// the earlier occurrence(s) within the declaration are not
> present.
> +// This is also true for overriding layout-qualifier-names,
> where one
> +// overrides the other (e.g., row_major vs. column_major); only
> the last
> +// occurrence has any effect."
> +//
> +// From the ARB_enhanced_layouts spec:
> +//
> +// "While *xfb_stride* can be declared multiple times for the
> same buffer,
> +// it is a compile-time or link-time error to have different
> values
> +// specified for the stride for the same buffer."
> +
> +#version 140
> +#extension GL_ARB_enhanced_layouts: require
> +
> +layout(xfb_stride = 32) layout(xfb_stride = 20) out;
> +layout(xfb_buffer = 0, xfb_stride = 32) out;
> +
> +void main()
> +{
> +}
> diff --git a/tests/spec/arb_enhanced_layouts/compiler/duplicate-
> layout-qualifier-identifiers/multiple-xfb_stride-global-identifiers-
> in-single-declaration.vert
> b/tests/spec/arb_enhanced_layouts/compiler/duplicate-layout-
> qualifier-identifiers/multiple-xfb_stride-global-identifiers-in-
> single-declaration.vert
> new file mode 100644
> index 0000000..73d509d
> --- /dev/null
> +++ b/tests/spec/arb_enhanced_layouts/compiler/duplicate-layout-
> qualifier-identifiers/multiple-xfb_stride-global-identifiers-in-
> single-declaration.vert
> @@ -0,0 +1,37 @@
> +// [config]
> +// expect_result: pass
> +// glsl_version: 1.40
> +// require_extensions: GL_ARB_enhanced_layouts
> +// check_link: true
> +// [end config]
> +//
> +// From the ARB_enhanced_layouts spec:
> +//
> +// "More than one layout qualifier may appear in a single
> declaration.
> +// Additionally, the same layout-qualifier-name can occur
> multiple times
> +// within a layout qualifier or across multiple layout
> qualifiers in the
> +// same declaration. When the same layout-qualifier-name occurs
> +// multiple times, in a single declaration, the last occurrence
> overrides
> +// the former occurrence(s). Further, if such a layout-
> qualifier-name
> +// will effect subsequent declarations or other observable
> behavior, it
> +// is only the last occurrence that will have any effect,
> behaving as if
> +// the earlier occurrence(s) within the declaration are not
> present.
> +// This is also true for overriding layout-qualifier-names,
> where one
> +// overrides the other (e.g., row_major vs. column_major); only
> the last
> +// occurrence has any effect."
> +//
> +// From the ARB_enhanced_layouts spec:
> +//
> +// "While *xfb_stride* can be declared multiple times for the
> same buffer,
> +// it is a compile-time or link-time error to have different
> values
> +// specified for the stride for the same buffer."
> +
> +#version 140
> +#extension GL_ARB_enhanced_layouts: require
> +
> +layout(xfb_stride = 32) layout(xfb_stride = 20) out;
> +layout(xfb_buffer = 0, xfb_stride = 20) out;
> +
> +void main()
> +{
> +}
> diff --git a/tests/spec/arb_enhanced_layouts/compiler/duplicate-
> layout-qualifier-identifiers/multiple-xfb_stride-namedblock-global-
> identifiers-in-single-declaration-mismatch.vert
> b/tests/spec/arb_enhanced_layouts/compiler/duplicate-layout-
> qualifier-identifiers/multiple-xfb_stride-namedblock-global-
> identifiers-in-single-declaration-mismatch.vert
> new file mode 100644
> index 0000000..c226925
> --- /dev/null
> +++ b/tests/spec/arb_enhanced_layouts/compiler/duplicate-layout-
> qualifier-identifiers/multiple-xfb_stride-namedblock-global-
> identifiers-in-single-declaration-mismatch.vert
> @@ -0,0 +1,41 @@
> +// [config]
> +// expect_result: fail
> +// glsl_version: 1.50
> +// require_extensions: GL_ARB_enhanced_layouts
> +// check_link: true
> +// [end config]
> +//
> +// From the ARB_enhanced_layouts spec:
> +//
> +// "More than one layout qualifier may appear in a single
> declaration.
> +// Additionally, the same layout-qualifier-name can occur
> multiple times
> +// within a layout qualifier or across multiple layout
> qualifiers in the
> +// same declaration. When the same layout-qualifier-name occurs
> +// multiple times, in a single declaration, the last occurrence
> overrides
> +// the former occurrence(s). Further, if such a layout-
> qualifier-name
> +// will effect subsequent declarations or other observable
> behavior, it
> +// is only the last occurrence that will have any effect,
> behaving as if
> +// the earlier occurrence(s) within the declaration are not
> present.
> +// This is also true for overriding layout-qualifier-names,
> where one
> +// overrides the other (e.g., row_major vs. column_major); only
> the last
> +// occurrence has any effect."
> +//
> +// From the ARB_enhanced_layouts spec:
> +//
> +// "While *xfb_stride* can be declared multiple times for the
> same buffer,
> +// it is a compile-time or link-time error to have different
> values
> +// specified for the stride for the same buffer."
> +
> +#version 150
> +#extension GL_ARB_enhanced_layouts: require
> +
> +layout(xfb_stride = 20, xfb_buffer = 0) out;
> +
> +layout(xfb_stride = 20) layout(xfb_stride = 32) out block {
> + vec4 var;
> +} b1;
> +
> +void main()
> +{
> + b1.var = vec4(1.0);
> +}
> diff --git a/tests/spec/arb_enhanced_layouts/compiler/duplicate-
> layout-qualifier-identifiers/multiple-xfb_stride-namedblock-global-
> identifiers-in-single-declaration.vert
> b/tests/spec/arb_enhanced_layouts/compiler/duplicate-layout-
> qualifier-identifiers/multiple-xfb_stride-namedblock-global-
> identifiers-in-single-declaration.vert
> new file mode 100644
> index 0000000..9460bfa
> --- /dev/null
> +++ b/tests/spec/arb_enhanced_layouts/compiler/duplicate-layout-
> qualifier-identifiers/multiple-xfb_stride-namedblock-global-
> identifiers-in-single-declaration.vert
> @@ -0,0 +1,41 @@
> +// [config]
> +// expect_result: pass
> +// glsl_version: 1.50
> +// require_extensions: GL_ARB_enhanced_layouts
> +// check_link: true
> +// [end config]
> +//
> +// From the ARB_enhanced_layouts spec:
> +//
> +// "More than one layout qualifier may appear in a single
> declaration.
> +// Additionally, the same layout-qualifier-name can occur
> multiple times
> +// within a layout qualifier or across multiple layout
> qualifiers in the
> +// same declaration. When the same layout-qualifier-name occurs
> +// multiple times, in a single declaration, the last occurrence
> overrides
> +// the former occurrence(s). Further, if such a layout-
> qualifier-name
> +// will effect subsequent declarations or other observable
> behavior, it
> +// is only the last occurrence that will have any effect,
> behaving as if
> +// the earlier occurrence(s) within the declaration are not
> present.
> +// This is also true for overriding layout-qualifier-names,
> where one
> +// overrides the other (e.g., row_major vs. column_major); only
> the last
> +// occurrence has any effect."
> +//
> +// From the ARB_enhanced_layouts spec:
> +//
> +// "While *xfb_stride* can be declared multiple times for the
> same buffer,
> +// it is a compile-time or link-time error to have different
> values
> +// specified for the stride for the same buffer."
> +
> +#version 150
> +#extension GL_ARB_enhanced_layouts: require
> +
> +layout(xfb_stride = 20, xfb_buffer = 0) out;
> +
> +layout(xfb_stride = 32) layout(xfb_stride = 20) out block {
> + vec4 var;
> +} b1;
> +
> +void main()
> +{
> + b1.var = vec4(1.0);
> +}
> diff --git a/tests/spec/arb_enhanced_layouts/compiler/duplicate-
> layout-qualifier-identifiers/multiple-xfb_stride-namedblock-
> identifiers-in-single-declaration-mismatch.vert
> b/tests/spec/arb_enhanced_layouts/compiler/duplicate-layout-
> qualifier-identifiers/multiple-xfb_stride-namedblock-identifiers-in-
> single-declaration-mismatch.vert
> new file mode 100644
> index 0000000..6c22f63
> --- /dev/null
> +++ b/tests/spec/arb_enhanced_layouts/compiler/duplicate-layout-
> qualifier-identifiers/multiple-xfb_stride-namedblock-identifiers-in-
> single-declaration-mismatch.vert
> @@ -0,0 +1,44 @@
> +// [config]
> +// expect_result: fail
> +// glsl_version: 1.50
> +// require_extensions: GL_ARB_enhanced_layouts
> +// check_link: true
> +// [end config]
> +//
> +// From the ARB_enhanced_layouts spec:
> +//
> +// "More than one layout qualifier may appear in a single
> declaration.
> +// Additionally, the same layout-qualifier-name can occur
> multiple times
> +// within a layout qualifier or across multiple layout
> qualifiers in the
> +// same declaration. When the same layout-qualifier-name occurs
> +// multiple times, in a single declaration, the last occurrence
> overrides
> +// the former occurrence(s). Further, if such a layout-
> qualifier-name
> +// will effect subsequent declarations or other observable
> behavior, it
> +// is only the last occurrence that will have any effect,
> behaving as if
> +// the earlier occurrence(s) within the declaration are not
> present.
> +// This is also true for overriding layout-qualifier-names,
> where one
> +// overrides the other (e.g., row_major vs. column_major); only
> the last
> +// occurrence has any effect."
> +//
> +// From the ARB_enhanced_layouts spec:
> +//
> +// "While *xfb_stride* can be declared multiple times for the
> same buffer,
> +// it is a compile-time or link-time error to have different
> values
> +// specified for the stride for the same buffer."
> +
> +#version 150
> +#extension GL_ARB_enhanced_layouts: require
> +
> +layout(xfb_stride = 20) layout(xfb_stride = 32) out block1 {
> + vec4 var;
> +} b1;
> +
> +layout(xfb_buffer = 0, xfb_stride = 20) out block2 {
> + vec4 var2;
> +} b2;
> +
> +void main()
> +{
> + b1.var = vec4(1.0);
> + b2.var2 = vec4(0.0);
> +}
> diff --git a/tests/spec/arb_enhanced_layouts/compiler/duplicate-
> layout-qualifier-identifiers/multiple-xfb_stride-namedblock-
> identifiers-in-single-declaration.vert
> b/tests/spec/arb_enhanced_layouts/compiler/duplicate-layout-
> qualifier-identifiers/multiple-xfb_stride-namedblock-identifiers-in-
> single-declaration.vert
> new file mode 100644
> index 0000000..56b5b2a
> --- /dev/null
> +++ b/tests/spec/arb_enhanced_layouts/compiler/duplicate-layout-
> qualifier-identifiers/multiple-xfb_stride-namedblock-identifiers-in-
> single-declaration.vert
> @@ -0,0 +1,44 @@
> +// [config]
> +// expect_result: pass
> +// glsl_version: 1.50
> +// require_extensions: GL_ARB_enhanced_layouts
> +// check_link: true
> +// [end config]
> +//
> +// From the ARB_enhanced_layouts spec:
> +//
> +// "More than one layout qualifier may appear in a single
> declaration.
> +// Additionally, the same layout-qualifier-name can occur
> multiple times
> +// within a layout qualifier or across multiple layout
> qualifiers in the
> +// same declaration. When the same layout-qualifier-name occurs
> +// multiple times, in a single declaration, the last occurrence
> overrides
> +// the former occurrence(s). Further, if such a layout-
> qualifier-name
> +// will effect subsequent declarations or other observable
> behavior, it
> +// is only the last occurrence that will have any effect,
> behaving as if
> +// the earlier occurrence(s) within the declaration are not
> present.
> +// This is also true for overriding layout-qualifier-names,
> where one
> +// overrides the other (e.g., row_major vs. column_major); only
> the last
> +// occurrence has any effect."
> +//
> +// From the ARB_enhanced_layouts spec:
> +//
> +// "While *xfb_stride* can be declared multiple times for the
> same buffer,
> +// it is a compile-time or link-time error to have different
> values
> +// specified for the stride for the same buffer."
> +
> +#version 150
> +#extension GL_ARB_enhanced_layouts: require
> +
> +layout(xfb_stride = 32) layout(xfb_stride = 20) out block1 {
> + vec4 var;
> +} b1;
> +
> +layout(xfb_buffer = 0, xfb_stride = 20) out block2 {
> + vec4 var2;
> +} b2;
> +
> +void main()
> +{
> + b1.var = vec4(1.0);
> + b2.var2 = vec4(0.0);
> +}
> diff --git a/tests/spec/arb_enhanced_layouts/compiler/duplicate-
> layout-qualifier-identifiers/multiple-xfb_stride-variable-global-
> identifiers-in-single-declaration-mismatch.vert
> b/tests/spec/arb_enhanced_layouts/compiler/duplicate-layout-
> qualifier-identifiers/multiple-xfb_stride-variable-global-
> identifiers-in-single-declaration-mismatch.vert
> new file mode 100644
> index 0000000..e3cdfc4
> --- /dev/null
> +++ b/tests/spec/arb_enhanced_layouts/compiler/duplicate-layout-
> qualifier-identifiers/multiple-xfb_stride-variable-global-
> identifiers-in-single-declaration-mismatch.vert
> @@ -0,0 +1,39 @@
> +// [config]
> +// expect_result: fail
> +// glsl_version: 1.40
> +// require_extensions: GL_ARB_enhanced_layouts
> +// check_link: true
> +// [end config]
> +//
> +// From the ARB_enhanced_layouts spec:
> +//
> +// "More than one layout qualifier may appear in a single
> declaration.
> +// Additionally, the same layout-qualifier-name can occur
> multiple times
> +// within a layout qualifier or across multiple layout
> qualifiers in the
> +// same declaration. When the same layout-qualifier-name occurs
> +// multiple times, in a single declaration, the last occurrence
> overrides
> +// the former occurrence(s). Further, if such a layout-
> qualifier-name
> +// will effect subsequent declarations or other observable
> behavior, it
> +// is only the last occurrence that will have any effect,
> behaving as if
> +// the earlier occurrence(s) within the declaration are not
> present.
> +// This is also true for overriding layout-qualifier-names,
> where one
> +// overrides the other (e.g., row_major vs. column_major); only
> the last
> +// occurrence has any effect."
> +//
> +// From the ARB_enhanced_layouts spec:
> +//
> +// "While *xfb_stride* can be declared multiple times for the
> same buffer,
> +// it is a compile-time or link-time error to have different
> values
> +// specified for the stride for the same buffer."
> +
> +#version 140
> +#extension GL_ARB_enhanced_layouts: require
> +
> +layout(xfb_stride = 20, xfb_buffer = 0) out;
> +
> +layout(xfb_buffer = 0, xfb_stride = 20) layout(xfb_stride = 32) out
> vec4 var;
> +
> +void main()
> +{
> + var = vec4(1.0);
> +}
> diff --git a/tests/spec/arb_enhanced_layouts/compiler/duplicate-
> layout-qualifier-identifiers/multiple-xfb_stride-variable-global-
> identifiers-in-single-declaration.vert
> b/tests/spec/arb_enhanced_layouts/compiler/duplicate-layout-
> qualifier-identifiers/multiple-xfb_stride-variable-global-
> identifiers-in-single-declaration.vert
> new file mode 100644
> index 0000000..89ebdd8
> --- /dev/null
> +++ b/tests/spec/arb_enhanced_layouts/compiler/duplicate-layout-
> qualifier-identifiers/multiple-xfb_stride-variable-global-
> identifiers-in-single-declaration.vert
> @@ -0,0 +1,39 @@
> +// [config]
> +// expect_result: pass
> +// glsl_version: 1.40
> +// require_extensions: GL_ARB_enhanced_layouts
> +// check_link: true
> +// [end config]
> +//
> +// From the ARB_enhanced_layouts spec:
> +//
> +// "More than one layout qualifier may appear in a single
> declaration.
> +// Additionally, the same layout-qualifier-name can occur
> multiple times
> +// within a layout qualifier or across multiple layout
> qualifiers in the
> +// same declaration. When the same layout-qualifier-name occurs
> +// multiple times, in a single declaration, the last occurrence
> overrides
> +// the former occurrence(s). Further, if such a layout-
> qualifier-name
> +// will effect subsequent declarations or other observable
> behavior, it
> +// is only the last occurrence that will have any effect,
> behaving as if
> +// the earlier occurrence(s) within the declaration are not
> present.
> +// This is also true for overriding layout-qualifier-names,
> where one
> +// overrides the other (e.g., row_major vs. column_major); only
> the last
> +// occurrence has any effect."
> +//
> +// From the ARB_enhanced_layouts spec:
> +//
> +// "While *xfb_stride* can be declared multiple times for the
> same buffer,
> +// it is a compile-time or link-time error to have different
> values
> +// specified for the stride for the same buffer."
> +
> +#version 140
> +#extension GL_ARB_enhanced_layouts: require
> +
> +layout(xfb_stride = 20, xfb_buffer = 0) out;
> +
> +layout(xfb_buffer = 0, xfb_stride = 32) layout(xfb_stride = 20) out
> vec4 var;
> +
> +void main()
> +{
> + var = vec4(1.0);
> +}
> diff --git a/tests/spec/arb_enhanced_layouts/compiler/duplicate-
> layout-qualifier-identifiers/multiple-xfb_stride-variable-
> identifiers-in-single-declaration-mismatch.vert
> b/tests/spec/arb_enhanced_layouts/compiler/duplicate-layout-
> qualifier-identifiers/multiple-xfb_stride-variable-identifiers-in-
> single-declaration-mismatch.vert
> new file mode 100644
> index 0000000..73e4345
> --- /dev/null
> +++ b/tests/spec/arb_enhanced_layouts/compiler/duplicate-layout-
> qualifier-identifiers/multiple-xfb_stride-variable-identifiers-in-
> single-declaration-mismatch.vert
> @@ -0,0 +1,39 @@
> +// [config]
> +// expect_result: fail
> +// glsl_version: 1.40
> +// require_extensions: GL_ARB_enhanced_layouts
> +// check_link: true
> +// [end config]
> +//
> +// From the ARB_enhanced_layouts spec:
> +//
> +// "More than one layout qualifier may appear in a single
> declaration.
> +// Additionally, the same layout-qualifier-name can occur
> multiple times
> +// within a layout qualifier or across multiple layout
> qualifiers in the
> +// same declaration. When the same layout-qualifier-name occurs
> +// multiple times, in a single declaration, the last occurrence
> overrides
> +// the former occurrence(s). Further, if such a layout-
> qualifier-name
> +// will effect subsequent declarations or other observable
> behavior, it
> +// is only the last occurrence that will have any effect,
> behaving as if
> +// the earlier occurrence(s) within the declaration are not
> present.
> +// This is also true for overriding layout-qualifier-names,
> where one
> +// overrides the other (e.g., row_major vs. column_major); only
> the last
> +// occurrence has any effect."
> +//
> +// From the ARB_enhanced_layouts spec:
> +//
> +// "While *xfb_stride* can be declared multiple times for the
> same buffer,
> +// it is a compile-time or link-time error to have different
> values
> +// specified for the stride for the same buffer."
> +
> +#version 140
> +#extension GL_ARB_enhanced_layouts: require
> +
> +layout(xfb_stride = 20) layout(xfb_stride = 32) out vec4 var;
> +layout(xfb_buffer = 0, xfb_stride = 20) out vec4 var2;
> +
> +void main()
> +{
> + var = vec4(1.0);
> + var2 = vec4(0.0);
> +}
> diff --git a/tests/spec/arb_enhanced_layouts/compiler/duplicate-
> layout-qualifier-identifiers/multiple-xfb_stride-variable-
> identifiers-in-single-declaration.vert
> b/tests/spec/arb_enhanced_layouts/compiler/duplicate-layout-
> qualifier-identifiers/multiple-xfb_stride-variable-identifiers-in-
> single-declaration.vert
> new file mode 100644
> index 0000000..8ca3776
> --- /dev/null
> +++ b/tests/spec/arb_enhanced_layouts/compiler/duplicate-layout-
> qualifier-identifiers/multiple-xfb_stride-variable-identifiers-in-
> single-declaration.vert
> @@ -0,0 +1,39 @@
> +// [config]
> +// expect_result: pass
> +// glsl_version: 1.40
> +// require_extensions: GL_ARB_enhanced_layouts
> +// check_link: true
> +// [end config]
> +//
> +// From the ARB_enhanced_layouts spec:
> +//
> +// "More than one layout qualifier may appear in a single
> declaration.
> +// Additionally, the same layout-qualifier-name can occur
> multiple times
> +// within a layout qualifier or across multiple layout
> qualifiers in the
> +// same declaration. When the same layout-qualifier-name occurs
> +// multiple times, in a single declaration, the last occurrence
> overrides
> +// the former occurrence(s). Further, if such a layout-
> qualifier-name
> +// will effect subsequent declarations or other observable
> behavior, it
> +// is only the last occurrence that will have any effect,
> behaving as if
> +// the earlier occurrence(s) within the declaration are not
> present.
> +// This is also true for overriding layout-qualifier-names,
> where one
> +// overrides the other (e.g., row_major vs. column_major); only
> the last
> +// occurrence has any effect."
> +//
> +// From the ARB_enhanced_layouts spec:
> +//
> +// "While *xfb_stride* can be declared multiple times for the
> same buffer,
> +// it is a compile-time or link-time error to have different
> values
> +// specified for the stride for the same buffer."
> +
> +#version 140
> +#extension GL_ARB_enhanced_layouts: require
> +
> +layout(xfb_stride = 32) layout(xfb_stride = 20) out vec4 var;
> +layout(xfb_buffer = 0, xfb_stride = 20) out vec4 var2;
> +
> +void main()
> +{
> + var = vec4(1.0);
> + var2 = vec4(0.0);
> +}
More information about the Piglit
mailing list