[Pixman] [PATCH 1/4] ARM: NEON: Some cleanup of bilinear scanline functions

Taekyun Kim podain77 at gmail.com
Wed Sep 21 01:38:02 PDT 2011


From: Taekyun Kim <tkq.kim at samsung.com>

Use STRIDE and initial horizontal weight update is done before
entering interpolation loop.
---
 pixman/pixman-arm-neon-asm-bilinear.S |  124 +++++++++++++++++----------------
 1 files changed, 64 insertions(+), 60 deletions(-)

diff --git a/pixman/pixman-arm-neon-asm-bilinear.S b/pixman/pixman-arm-neon-asm-bilinear.S
index 3c7fe0f..6a4698f 100644
--- a/pixman/pixman-arm-neon-asm-bilinear.S
+++ b/pixman/pixman-arm-neon-asm-bilinear.S
@@ -50,7 +50,7 @@
  *
  * Remarks
  *  There can be lots of pipeline stalls inside code block and between code blocks.
- *  Further optimizations will be done by new macro templates using head/tail_head/tail scheme.
+ *  Further optimizations will be dlast by new macro templates using head/tail_head/tail scheme.
  */
 
 /* Prevent the stack from becoming executable for no reason... */
@@ -92,21 +92,19 @@ fname:
  */
 
 .macro bilinear_load_8888 reg1, reg2, tmp
-    mov       TMP2, X, asr #16
+    mov       TMP1, X, asr #16
     add       X, X, UX
-    add       TMP1, TOP, TMP2, asl #2
-    add       TMP2, BOTTOM, TMP2, asl #2
-    vld1.32   {reg1}, [TMP1]
-    vld1.32   {reg2}, [TMP2]
+    add       TMP1, TOP, TMP1, asl #2
+    vld1.32   {reg1}, [TMP1], STRIDE
+    vld1.32   {reg2}, [TMP1]
 .endm
 
 .macro bilinear_load_0565 reg1, reg2, tmp
-    mov       TMP2, X, asr #16
+    mov       TMP1, X, asr #16
     add       X, X, UX
-    add       TMP1, TOP, TMP2, asl #1
-    add       TMP2, BOTTOM, TMP2, asl #1
-    vld1.32   {reg2[0]}, [TMP1]
-    vld1.32   {reg2[1]}, [TMP2]
+    add       TMP1, TOP, TMP1, asl #1
+    vld1.32   {reg2[0]}, [TMP1], STRIDE
+    vld1.32   {reg2[1]}, [TMP1]
     convert_four_0565_to_x888_packed reg2, reg1, reg2, tmp
 .endm
 
@@ -134,18 +132,16 @@ fname:
 .macro bilinear_load_and_vertical_interpolate_two_0565 \
                 acc1, acc2, reg1, reg2, reg3, reg4, acc2lo, acc2hi
 
-    mov       TMP2, X, asr #16
+    mov       TMP1, X, asr #16
     add       X, X, UX
-    mov       TMP4, X, asr #16
+    add       TMP1, TOP, TMP1, asl #1
+    mov       TMP2, X, asr #16
     add       X, X, UX
-    add       TMP1, TOP, TMP2, asl #1
-    add       TMP2, BOTTOM, TMP2, asl #1
-    add       TMP3, TOP, TMP4, asl #1
-    add       TMP4, BOTTOM, TMP4, asl #1
-    vld1.32   {acc2lo[0]}, [TMP1]
-    vld1.32   {acc2hi[0]}, [TMP3]
-    vld1.32   {acc2lo[1]}, [TMP2]
-    vld1.32   {acc2hi[1]}, [TMP4]
+    add       TMP2, TOP, TMP2, asl #1
+    vld1.32   {acc2lo[0]}, [TMP1], STRIDE
+    vld1.32   {acc2hi[0]}, [TMP2], STRIDE
+    vld1.32   {acc2lo[1]}, [TMP1]
+    vld1.32   {acc2hi[1]}, [TMP2]
     convert_0565_to_x888 acc2, reg3, reg2, reg1
     vzip.u8   reg1, reg3
     vzip.u8   reg2, reg4
@@ -161,34 +157,30 @@ fname:
                 xacc1, xacc2, xreg1, xreg2, xreg3, xreg4, xacc2lo, xacc2hi \
                 yacc1, yacc2, yreg1, yreg2, yreg3, yreg4, yacc2lo, yacc2hi
 
-    mov       TMP2, X, asr #16
+    mov       TMP1, X, asr #16
     add       X, X, UX
-    mov       TMP4, X, asr #16
+    add       TMP1, TOP, TMP1, asl #1
+    mov       TMP2, X, asr #16
     add       X, X, UX
-    add       TMP1, TOP, TMP2, asl #1
-    add       TMP2, BOTTOM, TMP2, asl #1
-    add       TMP3, TOP, TMP4, asl #1
-    add       TMP4, BOTTOM, TMP4, asl #1
-    vld1.32   {xacc2lo[0]}, [TMP1]
-    vld1.32   {xacc2hi[0]}, [TMP3]
-    vld1.32   {xacc2lo[1]}, [TMP2]
-    vld1.32   {xacc2hi[1]}, [TMP4]
+    add       TMP2, TOP, TMP2, asl #1
+    vld1.32   {xacc2lo[0]}, [TMP1], STRIDE
+    vld1.32   {xacc2hi[0]}, [TMP2], STRIDE
+    vld1.32   {xacc2lo[1]}, [TMP1]
+    vld1.32   {xacc2hi[1]}, [TMP2]
     convert_0565_to_x888 xacc2, xreg3, xreg2, xreg1
-    mov       TMP2, X, asr #16
+    mov       TMP1, X, asr #16
     add       X, X, UX
-    mov       TMP4, X, asr #16
+    add       TMP1, TOP, TMP1, asl #1
+    mov       TMP2, X, asr #16
     add       X, X, UX
-    add       TMP1, TOP, TMP2, asl #1
-    add       TMP2, BOTTOM, TMP2, asl #1
-    add       TMP3, TOP, TMP4, asl #1
-    add       TMP4, BOTTOM, TMP4, asl #1
-    vld1.32   {yacc2lo[0]}, [TMP1]
+    add       TMP2, TOP, TMP2, asl #1
+    vld1.32   {yacc2lo[0]}, [TMP1], STRIDE
     vzip.u8   xreg1, xreg3
-    vld1.32   {yacc2hi[0]}, [TMP3]
+    vld1.32   {yacc2hi[0]}, [TMP2], STRIDE
     vzip.u8   xreg2, xreg4
-    vld1.32   {yacc2lo[1]}, [TMP2]
+    vld1.32   {yacc2lo[1]}, [TMP1]
     vzip.u8   xreg3, xreg4
-    vld1.32   {yacc2hi[1]}, [TMP4]
+    vld1.32   {yacc2hi[1]}, [TMP2]
     vzip.u8   xreg1, xreg2
     convert_0565_to_x888 yacc2, yreg3, yreg2, yreg1
     vmull.u8  xacc1, xreg1, d28
@@ -237,7 +229,7 @@ fname:
 
 /*
  * Macros for loading mask pixels into register 'mask'.
- * vdup must be done in somewhere else.
+ * vdup must be dlast in somewhere else.
  */
 .macro bilinear_load_mask_x numpix, mask
 .endm
@@ -261,7 +253,7 @@ fname:
 
 /*
  * Macros for loading destination pixels into register 'dst0' and 'dst1'.
- * Interleave should be done somewhere else.
+ * Interleave should be dlast somewhere else.
  */
 .macro bilinear_load_dst_0565_src numpix, dst0, dst1, dst01
 .endm
@@ -303,7 +295,7 @@ fname:
  * For two pixel case
  *  (r0, r1, x, x, g0, g1, x, x) x (m0, m1, m0, m1, m0, m1, m0, m1)
  *  (b0, b1, x, x, a0, a1, x, x) x (m0, m1, m0, m1, m0, m1, m0, m1)
- * We can do some optimizations for this including one pixel cases.
+ * We can do some optimizations for this including last pixel cases.
  */
 .macro bilinear_duplicate_mask_x numpix, mask
 .endm
@@ -326,7 +318,7 @@ fname:
 
 /*
  * Macros for interleaving src and dst pixels to rrrr gggg bbbb aaaa form.
- * Interleave should be done when maks is enabled or operator is 'over'.
+ * Interleave should be dlast when maks is enabled or operator is 'over'.
  */
 .macro bilinear_interleave src0, src1, dst0, dst1
     vuzp.8      src0, src1
@@ -497,8 +489,7 @@ fname:
     bilinear_load_dst dst_fmt, op, 1, d18, d19, q9
     vmull.u8  q1, d0, d28
     vmlal.u8  q1, d1, d29
-    vshr.u16  d30, d24, #8
-    /* 4 cycles bubble */
+    /* 5 cycles bubble */
     vshll.u16 q0, d2, #8
     vmlsl.u16 q0, d2, d30
     vmlal.u16 q0, d3, d30
@@ -525,18 +516,18 @@ fname:
                 q1, q11, d0, d1, d20, d21, d22, d23
     bilinear_load_mask mask_fmt, 2, d4
     bilinear_load_dst dst_fmt, op, 2, d18, d19, q9
-    vshr.u16  q15, q12, #8
-    vadd.u16  q12, q12, q13
     vshll.u16 q0, d2, #8
     vmlsl.u16 q0, d2, d30
     vmlal.u16 q0, d3, d30
     vshll.u16 q10, d22, #8
     vmlsl.u16 q10, d22, d31
     vmlal.u16 q10, d23, d31
-    vshrn.u32 d30, q0, #16
-    vshrn.u32 d31, q10, #16
+    vshrn.u32 d0, q0, #16
+    vshrn.u32 d1, q10, #16
     bilinear_duplicate_mask mask_fmt, 2, d4
-    vmovn.u16 d0, q15
+    vshr.u16  q15, q12, #8
+    vadd.u16  q12, q12, q13
+    vmovn.u16 d0, q0
     bilinear_interleave_src_dst \
                 mask_fmt, op, 2, d0, d1, q0, d18, d19, q9
     bilinear_apply_mask_to_src \
@@ -554,8 +545,7 @@ fname:
                 q1, q11, d0, d1, d20, d21, d22, d23 \
                 q3, q9,  d4, d5, d16, d17, d18, d19
     pld       [TMP1, PF_OFFS]
-    vshr.u16  q15, q12, #8
-    vadd.u16  q12, q12, q13
+    sub       TMP1, TMP1, STRIDE
     vshll.u16 q0, d2, #8
     vmlsl.u16 q0, d2, d30
     vmlal.u16 q0, d3, d30
@@ -567,7 +557,7 @@ fname:
     vmlsl.u16 q2, d6, d30
     vmlal.u16 q2, d7, d30
     vshll.u16 q8, d18, #8
-    bilinear_load_mask mask_fmt, 4, d30
+    bilinear_load_mask mask_fmt, 4, d22
     bilinear_load_dst dst_fmt, op, 4, d2, d3, q1
     pld       [TMP2, PF_OFFS]
     vmlsl.u16 q8, d18, d31
@@ -577,17 +567,19 @@ fname:
     vshrn.u32 d1, q10, #16
     vshrn.u32 d4, q2, #16
     vshrn.u32 d5, q8, #16
-    bilinear_duplicate_mask mask_fmt, 4, d30
+    bilinear_duplicate_mask mask_fmt, 4, d22
+    vshr.u16  q15, q12, #8
     vmovn.u16 d0, q0
     vmovn.u16 d1, q2
+    vadd.u16  q12, q12, q13
     bilinear_interleave_src_dst \
                 mask_fmt, op, 4, d0, d1, q0, d2, d3, q1
     bilinear_apply_mask_to_src \
-                mask_fmt, 4, d0, d1, q0, d30, \
+                mask_fmt, 4, d0, d1, q0, d22, \
                 q3, q8, q9, q10
     bilinear_combine \
                 op, 4, d0, d1, q0, d2, d3, q1, \
-                q3, q8, q9, q10, d22
+                q3, q8, q9, q10, d23
     bilinear_deinterleave_dst mask_fmt, op, 4, d0, d1, q0
     bilinear_store_&dst_fmt 4, q2, q3
 .endm
@@ -610,6 +602,7 @@ pixman_asm_function fname
     PF_OFFS   .req      r7
     TMP3      .req      r8
     TMP4      .req      r9
+    STRIDE    .req      r2
 
     mov       ip, sp
     push      {r4, r5, r6, r7, r8, r9}
@@ -617,6 +610,9 @@ pixman_asm_function fname
     ldmia     ip, {WB, X, UX, WIDTH}
     mul       PF_OFFS, PF_OFFS, UX
 
+    sub       STRIDE, BOTTOM, TOP
+    .unreq    BOTTOM
+
     cmp       WIDTH, #0
     ble       3f
 
@@ -626,6 +622,8 @@ pixman_asm_function fname
     vdup.u8   d29, WB
     vadd.u16  d25, d25, d26
     vadd.u16  q13, q13, q13
+    vshr.u16  q15, q12, #8
+    vadd.u16  q12, q12, q13
 
     subs      WIDTH, WIDTH, #4
     blt       1f
@@ -648,7 +646,6 @@ pixman_asm_function fname
 
     .unreq    OUT
     .unreq    TOP
-    .unreq    BOTTOM
     .unreq    WT
     .unreq    WB
     .unreq    X
@@ -659,6 +656,7 @@ pixman_asm_function fname
     .unreq    PF_OFFS
     .unreq    TMP3
     .unreq    TMP4
+    .unreq    STRIDE
 .endfunc
 
 .endm
@@ -682,6 +680,7 @@ pixman_asm_function fname
     PF_OFFS   .req      r8
     TMP3      .req      r9
     TMP4      .req      r10
+    STRIDE    .req      r3
 
     mov       ip, sp
     push      {r4, r5, r6, r7, r8, r9, r10, ip}
@@ -689,6 +688,9 @@ pixman_asm_function fname
     ldmia     ip, {WT, WB, X, UX, WIDTH}
     mul       PF_OFFS, PF_OFFS, UX
 
+    sub       STRIDE, BOTTOM, TOP
+    .unreq    BOTTOM
+
     cmp       WIDTH, #0
     ble       3f
 
@@ -698,6 +700,8 @@ pixman_asm_function fname
     vdup.u8   d29, WB
     vadd.u16  d25, d25, d26
     vadd.u16  q13, q13, q13
+    vshr.u16  q15, q12, #8
+    vadd.u16  q12, q12, q13
 
     subs      WIDTH, WIDTH, #4
     blt       1f
@@ -720,7 +724,6 @@ pixman_asm_function fname
 
     .unreq    OUT
     .unreq    TOP
-    .unreq    BOTTOM
     .unreq    WT
     .unreq    WB
     .unreq    X
@@ -732,6 +735,7 @@ pixman_asm_function fname
     .unreq    PF_OFFS
     .unreq    TMP3
     .unreq    TMP4
+    .unreq    STRIDE
 .endfunc
 
 .endm
-- 
1.7.1



More information about the Pixman mailing list