[Pixman] [PATCH] V6 image: Use convolution filters for sample reconstruction when downscaling
Bill Spitzak
spitzak at gmail.com
Fri Jul 18 18:46:26 PDT 2014
This version removes testing code and has some changes to match my current
pixman version. My proposed pixman patch (not finished yet) will produce
exactly the same results as this cairo patch.
This code contains an all-new filter generator to replace the one that is
in pixman. Results in 222 pass/298 failed image tests, which is much better
than the previous versions of this patch.
Filter generator (which should probably be in pixman):
- Single filter, no "reconstruction" and "sample" filter
- Filters for derivative < 1 work
- Fixed IMPULSE and BOX
- Added TENT, CATMULL_ROM, NOTCH. Remove LANZCOS2.
- Renamed CUBIC to MITCHELL
Cairo's filter settings:
- CAIRO_FILTER_GOOD: uses BOX filter for scales less than .75 in either
direction. Uses PIXMAN_FILTER_GOOD (ie BILINEAR) otherwise.
- CAIRO_FILTER_BEST: uses CATMULL filter always. Upscaling more than 2x will
produce anti-aliased square pixels, similar to OS/X.
- CAIRO_FILTER_GAUSSIAN: this obsolete value is used to test other filters.
The program must declare and poke the filter into the static varialbe
ikernel. This should be removed for production code.
NYI: This version uses the fallback for xlib always. The xlib and xcb backends
must be rewritten to use the fallback version if filtering is needed. Or the
filtering code must be moved to XRender.
---
src/cairo-image-source.c | 420 +++++++++++++++++++++++++++++++++++++++++++++-
src/cairo-xlib-display.c | 2 +-
2 files changed, 420 insertions(+), 2 deletions(-)
diff --git a/src/cairo-image-source.c b/src/cairo-image-source.c
index c5bd228..b6b6b9f 100644
--- a/src/cairo-image-source.c
+++ b/src/cairo-image-source.c
@@ -526,6 +526,368 @@ _pixel_to_solid (cairo_image_surface_t *image, int x, int y)
}
}
+/* ========================================================================== */
+
+/* Index into filter table */
+typedef enum
+{
+ KERNEL_IMPULSE,
+ KERNEL_BOX,
+ KERNEL_LINEAR,
+ KERNEL_MITCHELL,
+ KERNEL_NOTCH,
+ KERNEL_CATMULL_ROM,
+ KERNEL_LANCZOS3,
+ KERNEL_LANCZOS3_STRETCHED,
+ KERNEL_TENT
+} kernel_t;
+
+/* Produce contribution of a filter of size r for pixel centered on x.
+ For a typical low-pass function this evaluates the function at x/r.
+ If the frequency is higher than 1/2, such as when r is less than 1,
+ this may need to integrate several samples, see cubic for examples.
+*/
+typedef double (* kernel_func_t) (double x, double r);
+
+/* Return maximum number of pixels that will be non-zero. Except for
+ impluse this is the maximum of 2 and the width of the non-zero part
+ of the filter rounded up to the next integer.
+*/
+typedef int (* kernel_width_func_t) (double r);
+
+/* Table of filters */
+typedef struct
+{
+ kernel_t kernel;
+ kernel_func_t func;
+ kernel_width_func_t width;
+} filter_info_t;
+
+/* PIXMAN_KERNEL_IMPULSE: Returns pixel nearest the center. This
+ matches PIXMAN_FILTER_NEAREST. This is useful if you wish to
+ combine the result of nearest in one direction with another filter
+ in the other.
+*/
+
+static double
+impulse_kernel (double x, double r)
+{
+ return 1;
+}
+
+static int
+impulse_width (double r)
+{
+ return 1;
+}
+
+/* PIXMAN_KERNEL_BOX: Intersection of a box of width r with square
+ pixels. This is the smallest possible filter such that the output
+ image contains an equal contribution from all the input
+ pixels. Lots of software uses this. The function is a trapazoid of
+ width r+1, not a box.
+
+ When r == 1.0, PIXMAN_KERNEL_BOX, PIXMAN_KERNEL_LINEAR, and
+ PIXMAN_KERNEL_TENT all produce the same filter, allowing
+ them to be exchanged at this point.
+*/
+
+static double
+box_kernel (double x, double r)
+{
+ return MAX (0.0, MIN (MIN (r, 1.0),
+ MIN ((r + 1) / 2 - x, (r + 1) / 2 + x)));
+}
+
+static int
+box_width (double r)
+{
+ return r < 1.0 ? 2 : ceil(r + 1);
+}
+
+/* PIXMAN_KERNEL_LINEAR: Weighted sum of the two pixels nearest the
+ center, or a triangle of width 2. This matches
+ PIXMAN_FILTER_BILINEAR. This is useful if you wish to combine the
+ result of bilinear in one direction with another filter in the
+ other. This is not a good filter if r > 1. You may actually want
+ PIXMAN_FILTER_TENT.
+
+ When r == 1.0, PIXMAN_KERNEL_BOX, PIXMAN_KERNEL_LINEAR, and
+ PIXMAN_KERNEL_TENT all produce the same filter, allowing
+ them to be exchanged at this point.
+*/
+
+static double
+linear_kernel (double x, double r)
+{
+ return MAX (1.0 - fabs(x), 0.0);
+}
+
+static int
+linear_width (double r)
+{
+ return 2;
+}
+
+/* Cubic functions described in the Mitchell-Netravali paper.
+ http://mentallandscape.com/Papers_siggraph88.pdf. This describes
+ all possible cubic functions that can be used for sampling.
+*/
+
+static double
+general_cubic (double x, double r, double B, double C)
+{
+ double ax;
+ if (r < 1.0)
+ return
+ general_cubic(x * 2 - .5, r * 2, B, C) +
+ general_cubic(x * 2 + .5, r * 2, B, C);
+
+ ax = fabs (x / r);
+
+ if (ax < 1)
+ {
+ return (((12 - 9 * B - 6 * C) * ax +
+ (-18 + 12 * B + 6 * C)) * ax * ax +
+ (6 - 2 * B)) / 6;
+ }
+ else if (ax < 2)
+ {
+ return ((((-B - 6 * C) * ax +
+ (6 * B + 30 * C)) * ax +
+ (-12 * B - 48 * C)) * ax +
+ (8 * B + 24 * C)) / 6;
+ }
+ else
+ {
+ return 0.0;
+ }
+}
+
+static int
+cubic_width (double r)
+{
+ return MAX (2, ceil (r * 4));
+}
+
+/* PIXMAN_KERNEL_CATMULL_ROM: Catmull-Rom interpolation. Often called
+ "cubic interpolation", "b-spline", or just "cubic" by other
+ software. This filter has negative values so it can produce ringing
+ and output pixels outside the range of input pixels. This is very
+ close to lanczos2 so there is no reason to supply that as well.
+*/
+
+static double
+cubic_kernel (double x, double r)
+{
+ return general_cubic (x, r, 0.0, 0.5);
+}
+
+/* PIXMAN_KERNEL_MITCHELL: Cubic recommended by the Mitchell-Netravali
+ paper. This has negative values and because the values at +/-1 are
+ not zero it does not interpolate the pixels, meaning it will change
+ an image even if there is no translation.
+*/
+
+static double
+mitchell_kernel (double x, double r)
+{
+ return general_cubic (x, r, 1/3.0, 1/3.0);
+}
+
+/* PIXMAN_KERNEL_NOTCH: Cubic recommended by the Mitchell-Netravali
+ paper to remove postaliasing artifacts. This does not remove
+ aliasing already present in the source image, though it may appear
+ to due to it's excessive blurriness. In any case this is more
+ useful than gaussian for image reconstruction.
+*/
+
+static double
+notch_kernel (double x, double r)
+{
+ return general_cubic (x, r, 1.5, -0.25);
+}
+
+/* PIXMAN_KERNEL_LANCZOS3: lanczos windowed sinc function from -3 to
+ +3. Very popular with high-end software though I think any
+ advantage over cubics is hidden by quantization and programming
+ mistakes. You will see LANCZOS5 or even 7 sometimes.
+*/
+
+static double
+sinc (double x)
+{
+ return x ? sin (M_PI * x) / (M_PI * x) : 1.0;
+}
+
+static double
+lanczos (double x, double n)
+{
+ return fabs (x) < n ? sinc (x) * sinc (x * (1.0 / n)) : 0.0;
+}
+
+static double
+lanczos3_kernel (double x, double r)
+{
+ if (r < 1.0)
+ return
+ lanczos3_kernel (x * 2 - .5, r * 2) +
+ lanczos3_kernel (x * 2 + .5, r * 2);
+ else
+ return lanczos (x / r, 3.0);
+}
+
+static int
+lanczos3_width (double r)
+{
+ return MAX (2, ceil (r * 6));
+}
+
+/* PIXMAN_KERNEL_LANCZOS3_STRETCHED - The LANCZOS3 kernel widened by
+ 4/3. Recommended by Jim Blinn
+ http://graphics.cs.cmu.edu/nsp/course/15-462/Fall07/462/papers/jaggy.pdf
+*/
+
+static double
+nice_kernel (double x, double r)
+{
+ return lanczos3_kernel (x, r * (4.0/3));
+}
+
+static int
+nice_width (double r)
+{
+ return MAX (2.0, ceil (r * 8));
+}
+
+/* PIXMAN_KERNEL_TENT: Triangle of width 2r. Lots of software uses
+ this as a "better" filter, twice the size of a box but smaller than
+ a cubic.
+
+ When r == 1.0, PIXMAN_KERNEL_BOX, PIXMAN_KERNEL_LINEAR, and
+ PIXMAN_KERNEL_TENT all produce the same filter, allowing
+ them to be exchanged at this point.
+*/
+
+static double
+tent_kernel (double x, double r)
+{
+ if (r < 1.0)
+ return box_kernel(x, r);
+ else
+ return MAX (1.0 - fabs(x / r), 0.0);
+}
+
+static int
+tent_width (double r)
+{
+ return r < 1.0 ? 2 : ceil(2 * r);
+}
+
+
+static const filter_info_t filters[] =
+{
+ { KERNEL_IMPULSE, impulse_kernel, impulse_width },
+ { KERNEL_BOX, box_kernel, box_width },
+ { KERNEL_LINEAR, linear_kernel, linear_width },
+ { KERNEL_MITCHELL, mitchell_kernel, cubic_width },
+ { KERNEL_NOTCH, notch_kernel, cubic_width },
+ { KERNEL_CATMULL_ROM, cubic_kernel, cubic_width },
+ { KERNEL_LANCZOS3, lanczos3_kernel, lanczos3_width },
+ { KERNEL_LANCZOS3_STRETCHED,nice_kernel, nice_width },
+ { KERNEL_TENT, tent_kernel, tent_width }
+};
+
+/* Fills in one dimension of the filter array */
+static void get_filter(kernel_t filter, double r,
+ int width, int subsample,
+ pixman_fixed_t* out)
+{
+ int i;
+ pixman_fixed_t *p = out;
+ int n_phases = 1 << subsample;
+ double step = 1.0 / n_phases;
+ kernel_func_t func = filters[filter].func;
+
+ /* special-case the impulse filter: */
+ if (width <= 1)
+ {
+ for (i = 0; i < n_phases; ++i)
+ *p++ = pixman_fixed_1;
+ return;
+ }
+
+ for (i = 0; i < n_phases; ++i)
+ {
+ double frac = (i + .5) * step;
+ /* Center of left-most pixel: */
+ double x1 = ceil (frac - width / 2.0 - 0.5) - frac + 0.5;
+ double total = 0;
+ pixman_fixed_t new_total = 0;
+ int j;
+
+ for (j = 0; j < width; ++j)
+ {
+ double v = func(x1 + j, r);
+ total += v;
+ p[j] = pixman_double_to_fixed (v);
+ }
+
+ /* Normalize */
+ total = 1 / total;
+ for (j = 0; j < width; ++j)
+ new_total += (p[j] *= total);
+
+ /* Put any error on center pixel */
+ p[width / 2] += (pixman_fixed_1 - new_total);
+
+ p += width;
+ }
+}
+
+
+/* Create the parameter list for a SEPARABLE_CONVOLUTION filter
+ * with the given kernels and scale parameters.
+ */
+static pixman_fixed_t *
+create_separable_convolution (int *n_values,
+ kernel_t xfilter,
+ double sx,
+ kernel_t yfilter,
+ double sy)
+{
+ int xwidth, xsubsample, ywidth, ysubsample, size_x, size_y;
+ pixman_fixed_t *params;
+
+ xwidth = filters[xfilter].width(sx);
+ xsubsample = 0;
+ if (xwidth > 1)
+ while (sx * (1 << xsubsample) <= 128.0) xsubsample++;
+ size_x = (1 << xsubsample) * xwidth;
+
+ ywidth = filters[yfilter].width(sy);
+ ysubsample = 0;
+ if (ywidth > 1)
+ while (sy * (1 << ysubsample) <= 128.0) ysubsample++;
+ size_y = (1 << ysubsample) * ywidth;
+
+ *n_values = 4 + size_x + size_y;
+ params = malloc (*n_values * sizeof (pixman_fixed_t));
+ if (!params) return 0;
+
+ params[0] = pixman_int_to_fixed (xwidth);
+ params[1] = pixman_int_to_fixed (ywidth);
+ params[2] = pixman_int_to_fixed (xsubsample);
+ params[3] = pixman_int_to_fixed (ysubsample);
+
+ get_filter(xfilter, sx, xwidth, xsubsample, params + 4);
+ get_filter(yfilter, sy, ywidth, ysubsample, params + 4 + size_x);
+
+ return params;
+}
+
+/* ========================================================================== */
+
static cairo_bool_t
_pixman_image_set_properties (pixman_image_t *pixman_image,
const cairo_pattern_t *pattern,
@@ -555,6 +917,24 @@ _pixman_image_set_properties (pixman_image_t *pixman_image,
else
{
pixman_filter_t pixman_filter;
+ kernel_t kernel;
+ double dx, dy;
+
+ /* Compute scale factors from the pattern matrix. These scale
+ * factors are from user to pattern space, and as such they
+ * are greater than 1.0 for downscaling and less than 1.0 for
+ * upscaling. The factors are the size of an axis-aligned
+ * rectangle with the same area as the parallelgram a 1x1
+ * square transforms to.
+ */
+ dx = hypot (pattern->matrix.xx, pattern->matrix.xy);
+ dy = hypot (pattern->matrix.yx, pattern->matrix.yy);
+
+ /* Clip at maximum pixman_fixed number. Besides making it
+ * passable to pixman, this avoids errors from inf and nan.
+ */
+ if (! (dx < 0x7FFF)) dx = 0x7FFF;
+ if (! (dy < 0x7FFF)) dy = 0x7FFF;
switch (pattern->filter) {
case CAIRO_FILTER_FAST:
@@ -562,9 +942,37 @@ _pixman_image_set_properties (pixman_image_t *pixman_image,
break;
case CAIRO_FILTER_GOOD:
pixman_filter = PIXMAN_FILTER_GOOD;
+ if (dx > 1.35 || dy > 1.35) {
+ pixman_filter = PIXMAN_FILTER_SEPARABLE_CONVOLUTION;
+ kernel = KERNEL_BOX;
+ /* Clip the filter size to prevent extreme slowness. This
+ value could be raised if 2-pass filtering is done */
+ if (dx > 16.0) dx = 16.0;
+ /* Match the bilinear filter for dimension scaling up: */
+ else if (dx < 1.0) dx = 1.0;
+ if (dy > 16.0) dy = 16.0;
+ else if (dy < 1.0) dy = 1.0;
+ }
break;
case CAIRO_FILTER_BEST:
pixman_filter = PIXMAN_FILTER_BEST;
+ pixman_filter = PIXMAN_FILTER_SEPARABLE_CONVOLUTION;
+ kernel = KERNEL_CATMULL_ROM; /* LANCZOS3 is better but not much */
+ /* Clip the filter size to prevent extreme slowness. This
+ value could be raised if 2-pass filtering is done */
+ if (dx > 16.0) { dx = 16.0; kernel = KERNEL_BOX; }
+ /* blur up to 2x scale, then blend to square pixels for larger: */
+ else if (dx < 1.0) {
+ if (dx < 1.0/128) dx = 1.0/127;
+ else if (dx < 0.5) dx = 1.0 / (1.0 / dx - 1.0);
+ else dx = 1.0;
+ }
+ if (dy > 16.0) { dy = 16.0; kernel = KERNEL_BOX; }
+ else if (dy < 1.0) {
+ if (dy < 1.0/128) dy = 1.0/127;
+ else if (dy < 0.5) dy = 1.0 / (1.0 / dy - 1.0);
+ else dy = 1.0;
+ }
break;
case CAIRO_FILTER_NEAREST:
pixman_filter = PIXMAN_FILTER_NEAREST;
@@ -582,7 +990,17 @@ _pixman_image_set_properties (pixman_image_t *pixman_image,
pixman_filter = PIXMAN_FILTER_BEST;
}
- pixman_image_set_filter (pixman_image, pixman_filter, NULL, 0);
+ if (pixman_filter == PIXMAN_FILTER_SEPARABLE_CONVOLUTION) {
+ int n_params;
+ pixman_fixed_t *params;
+ params = create_separable_convolution
+ (&n_params, kernel, dx, kernel, dy);
+ pixman_image_set_filter (pixman_image, pixman_filter,
+ params, n_params);
+ free (params);
+ } else {
+ pixman_image_set_filter (pixman_image, pixman_filter, NULL, 0);
+ }
}
{
diff --git a/src/cairo-xlib-display.c b/src/cairo-xlib-display.c
index c7708c5..a073d08 100644
--- a/src/cairo-xlib-display.c
+++ b/src/cairo-xlib-display.c
@@ -151,7 +151,7 @@ static const cairo_device_backend_t _cairo_xlib_device_backend = {
static void _cairo_xlib_display_select_compositor (cairo_xlib_display_t *display)
{
-#if 1
+#if 0
if (display->render_major > 0 || display->render_minor >= 4)
display->compositor = _cairo_xlib_traps_compositor_get ();
else if (display->render_major > 0 || display->render_minor >= 0)
--
1.7.9.5
More information about the Pixman
mailing list