[pulseaudio-tickets] [PulseAudio] #890: AirPlay (raop) unable to initiate playback on Denon 4311

[PulseAudio]

#890: AirPlay (raop) unable to initiate playback on Denon 4311
-----------------------+----------------------------------------------------
  Reporter:  kristian  |       Owner:  coling                    
      Type:  defect    |      Status:  new                       
 Milestone:            |   Component:  module-raop-*             
Resolution:            |    Keywords:  raop, denon, rtsp, airplay
-----------------------+----------------------------------------------------

Comment(by nickbp):

 I also am unable to use pulseaudio to connect to an AVR-1912. It works
 fine with other methods, in my case I was able to successfully control the
 device with an android client named "iMediaShare Lite", which likely rules
 out the device itself as the cause.

 The above attachment is the wireshark dump for the following log:

 D: [pulseaudio] module-raop-discover.c: Found RAOP: AVR-1912
 D: [pulseaudio] module-raop-discover.c: Found key: 'txtvers' with value:
 '1'
 D: [pulseaudio] module-raop-discover.c: Found key: 'ch' with value: '2'
 D: [pulseaudio] module-raop-discover.c: Found key: 'cn' with value: '0,1'
 D: [pulseaudio] module-raop-discover.c: Found key: 'et' with value: '0,4'
 D: [pulseaudio] module-raop-discover.c: Found key: 'sv' with value:
 'false'
 D: [pulseaudio] module-raop-discover.c: Found key: 'da' with value: 'true'
 D: [pulseaudio] module-raop-discover.c: Found key: 'sr' with value:
 '44100'
 D: [pulseaudio] module-raop-discover.c: Found key: 'ss' with value: '16'
 D: [pulseaudio] module-raop-discover.c: Found key: 'pw' with value:
 'false'
 D: [pulseaudio] module-raop-discover.c: Found key: 'vn' with value:
 '65537'
 D: [pulseaudio] module-raop-discover.c: Found key: 'tp' with value: 'UDP'
 D: [pulseaudio] module-raop-discover.c: Found key: 'md' with value:
 '0,1,2'
 D: [pulseaudio] module-raop-discover.c: Found key: 'vs' with value:
 '103.2'
 D: [pulseaudio] module-raop-discover.c: Found key: 'am' with value:
 'DENON,1'
 D: [pulseaudio] module-raop-discover.c: Found key: 'fv' with value:
 '65.8881'
 D: [pulseaudio] module-raop-discover.c: Loading module-raop-sink with
 arguments 'server=[10.0.0.6]:1024 sink_name=raop.AVR-1912.local
 sink_properties='device.description="AVR-1912"''

 D: [pulseaudio] rtsp_client.c: Attempting to connect to server
 '10.0.0.6:1024'
 D: [raop-sink] module-raop-sink.c: Thread starting up
 D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Device
 added for object /org/pulseaudio/core1/source2
 D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Source
 added for object /org/pulseaudio/core1/source2
 D: [pulseaudio] module-device-restore.c: Could not set format on sink
 raop.AVR-1912.local
 D: [pulseaudio] module-suspend-on-idle.c: Sink raop.AVR-1912.local becomes
 idle, timeout in 5 seconds.
 D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Device
 added for object /org/pulseaudio/core1/sink1
 D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Sink added
 for object /org/pulseaudio/core1/sink1
 I: [pulseaudio] module.c: Loaded "module-raop-sink" (index: #22; argument:
 "server=[10.0.0.6]:1024 sink_name=raop.AVR-1912.local
 sink_properties='device.description="AVR-1912"'").
 D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module
 added for object /org/pulseaudio/core1/module22
 D: [pulseaudio] rtsp_client.c: Established RTSP connection from local ip
 10.0.0.5
 D: [pulseaudio] raop_client.c: RAOP: CONNECTED
 D: [pulseaudio] rtsp_client.c: Sending command: ANNOUNCE
 D: [pulseaudio] rtsp_client.c: Full response received. Dispatching
 D: [pulseaudio] raop_client.c: RAOP: ANNOUNCED
 D: [pulseaudio] rtsp_client.c: Sending command: SETUP
 W: [pulseaudio] rtsp_client.c: Unexpected response: RTSP/1.0 500 Internal
 Server Error
 W: [pulseaudio] rtsp_client.c: Unexpected response: Server: AirTunes/103.2
 W: [pulseaudio] rtsp_client.c: Unexpected response: CSeq: 2
 W: [pulseaudio] rtsp_client.c: Unexpected response:

 The 1912 briefly shows a "Connecting..." message until it presumably gives
 up after the failure.

-- 
Ticket URL: <http://pulseaudio.org/ticket/890#comment:7>
PulseAudio <http://pulseaudio.org/>
The PulseAudio Sound Server