[pulseaudio-tickets] [Bug 71078] pulseaudio will continue using high cpu after hibernate

[bugzilla-daemon at freedesktop.org]

https://bugs.freedesktop.org/show_bug.cgi?id=71078

--- Comment #13 from Raymond <superquad.vortex2 at gmail.com> ---
you have to use --log-time


D: [pulseaudio] alsa-util.c:   appl_ptr     : 0
D: [pulseaudio] alsa-util.c:   hw_ptr       : 0
D: [alsa-source-ALC272 Analog] alsa-source.c: Thread starting up
D: [alsa-source-ALC272 Analog] core-util.c: SCHED_RR worked.
I: [alsa-source-ALC272 Analog] core-util.c: Successfully enabled SCHED_RR
scheduling for thread, with priority 5.
I: [alsa-source-ALC272 Analog] alsa-source.c: Starting capture.



D: [pulseaudio] main.c: Got org.PulseAudio1!
D: [pulseaudio] main.c: Got org.pulseaudio.Server!
I: [pulseaudio] main.c: 幕後程式啟動完成。
D: [pulseaudio] bluetooth-util.c: dbus: interface=org.freedesktop.DBus,
path=/org/freedesktop/DBus, member=NameAcquired
E: [alsa-source-ALC272 Analog] alsa-util.c: snd_pcm_avail_delay() returned
strange values: delay 0 is less than avail 8.
E: [alsa-source-ALC272 Analog] alsa-util.c: Most likely this is a bug in the
ALSA driver 'snd_hda_intel'. Please report this issue to the ALSA developers.
E: [alsa-source-ALC272 Analog] alsa-util.c: snd_pcm_dump():
E: [alsa-source-ALC272 Analog] alsa-util.c: Direct Snoop PCM
E: [alsa-source-ALC272 Analog] alsa-util.c: Its setup is:
E: [alsa-source-ALC272 Analog] alsa-util.c:   stream       : CAPTURE
E: [alsa-source-ALC272 Analog] alsa-util.c:   access       : MMAP_INTERLEAVED
E: [alsa-source-ALC272 Analog] alsa-util.c:   format       : S32_LE
E: [alsa-source-ALC272 Analog] alsa-util.c:   subformat    : STD
E: [alsa-source-ALC272 Analog] alsa-util.c:   channels     : 2
E: [alsa-source-ALC272 Analog] alsa-util.c:   rate         : 48000
E: [alsa-source-ALC272 Analog] alsa-util.c:   exact rate   : 48000 (48000/1)
E: [alsa-source-ALC272 Analog] alsa-util.c:   msbits       : 32
E: [alsa-source-ALC272 Analog] alsa-util.c:   buffer_size  : 8192
E: [alsa-source-ALC272 Analog] alsa-util.c:   period_size  : 1024
E: [alsa-source-ALC272 Analog] alsa-util.c:   period_time  : 21333
E: [alsa-source-ALC272 Analog] alsa-util.c:   tstamp_mode  : ENABLE
E: [alsa-source-ALC272 Analog] alsa-util.c:   period_step  : 1
E: [alsa-source-ALC272 Analog] alsa-util.c:   avail_min    : 7310
E: [alsa-source-ALC272 Analog] alsa-util.c:   period_event : 0
E: [alsa-source-ALC272 Analog] alsa-util.c:   start_threshold  : -1
E: [alsa-source-ALC272 Analog] alsa-util.c:   stop_threshold   :
4611686018427387904
E: [alsa-source-ALC272 Analog] alsa-util.c:   silence_threshold: 0
E: [alsa-source-ALC272 Analog] alsa-util.c:   silence_size : 0
E: [alsa-source-ALC272 Analog] alsa-util.c:   boundary     :
4611686018427387904
E: [alsa-source-ALC272 Analog] alsa-util.c: Hardware PCM card 0 'HDA Intel MID'
device 0 subdevice 0
E: [alsa-source-ALC272 Analog] alsa-util.c: Its setup is:
E: [alsa-source-ALC272 Analog] alsa-util.c:   stream       : CAPTURE
E: [alsa-source-ALC272 Analog] alsa-util.c:   access       : MMAP_INTERLEAVED
E: [alsa-source-ALC272 Analog] alsa-util.c:   format       : S32_LE
E: [alsa-source-ALC272 Analog] alsa-util.c:   subformat    : STD
E: [alsa-source-ALC272 Analog] alsa-util.c:   channels     : 2
E: [alsa-source-ALC272 Analog] alsa-util.c:   rate         : 48000
E: [alsa-source-ALC272 Analog] alsa-util.c:   exact rate   : 48000 (48000/1)
E: [alsa-source-ALC272 Analog] alsa-util.c:   msbits       : 32
E: [alsa-source-ALC272 Analog] alsa-util.c:   buffer_size  : 8192
E: [alsa-source-ALC272 Analog] alsa-util.c:   period_size  : 1024
E: [alsa-source-ALC272 Analog] alsa-util.c:   period_time  : 21333
E: [alsa-source-ALC272 Analog] alsa-util.c:   tstamp_mode  : ENABLE
E: [alsa-source-ALC272 Analog] alsa-util.c:   period_step  : 1
E: [alsa-source-ALC272 Analog] alsa-util.c:   avail_min    : 1024
E: [alsa-source-ALC272 Analog] alsa-util.c:   period_event : 0
E: [alsa-source-ALC272 Analog] alsa-util.c:   start_threshold  : 1
E: [alsa-source-ALC272 Analog] alsa-util.c:   stop_threshold   :
4611686018427387904
E: [alsa-source-ALC272 Analog] alsa-util.c:   silence_threshold: 0
E: [alsa-source-ALC272 Analog] alsa-util.c:   silence_size : 0
E: [alsa-source-ALC272 Analog] alsa-util.c:   boundary     :
4611686018427387904
E: [alsa-source-ALC272 Analog] alsa-util.c:   appl_ptr     : 0
E: [alsa-source-ALC272 Analog] alsa-util.c:   hw_ptr       : 16424

the sound card alreay capture (hw_ptr is at 16424) but pulseaudio still not
read anything (appl_ptr = 0 )


I: [alsa-sink-ALC272 Analog] alsa-sink.c: Scheduling delay of 5247.71ms >
7.06ms, you might want to investigate this to improve latency...
I: [alsa-source-ALC272 Analog] alsa-source.c: Scheduling delay of 5246.44ms,
you might want to investigate this to improve latency...

-- 
You are receiving this mail because:
You are the QA Contact for the bug.
You are the assignee for the bug.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freedesktop.org/archives/pulseaudio-bugs/attachments/20140108/664cbe4a/attachment.html>