[pulseaudio-tickets] [Bug 90489] [regression] DYNAMIC_LATENCY introduced in module-combine causes a race contition between pa_sink_render_into_full and sink_update_requested_latency_cb in alsa-sink.c
bugzilla-daemon at freedesktop.org
bugzilla-daemon at freedesktop.org
Sun May 17 22:21:03 PDT 2015
https://bugs.freedesktop.org/show_bug.cgi?id=90489
--- Comment #6 from Raymond <superquad.vortex2 at gmail.com> ---
Codec: Conexant CX20757
Address: 0
AFG Function Id: 0x1 (unsol 1)
Vendor Id: 0x14f15115
Subsystem Id: 0x17aac03d
Revision Id: 0x100100
No Modem Function Group found
Default PCM:
rates [0x160]: 44100 48000 96000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Default Amp-In caps: N/A
Default Amp-Out caps: N/A
State of AFG node 0x01:
Power states: D0 D1 D2 D3 D3cold S3D3cold CLKSTOP EPSS
Power: setting=D0, actual=D0
GPIO: io=3, o=0, i=0, unsolicited=1, wake=0
IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
Node 0x10 [Audio Output] wcaps 0xc1d: Stereo Amp-Out R/L
Control: name="Headphone Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Control: name="Headphone Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Device: name="CX20757 Analog", type="Audio", device=0
Amp-Out caps: ofs=0x4a, nsteps=0x4a, stepsize=0x03, mute=1
Amp-Out vals: [0x80 0x80]
Converter: stream=8, channel=0
PCM:
rates [0x60]: 44100 48000
bits [0xa]: 16 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Node 0x11 [Audio Output] wcaps 0xc1d: Stereo Amp-Out R/L
Control: name="Speaker Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Control: name="Speaker Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Amp-Out caps: ofs=0x4a, nsteps=0x4a, stepsize=0x03, mute=1
Amp-Out vals: [0x4a 0x4a]
Converter: stream=8, channel=0
PCM:
rates [0x60]: 44100 48000
bits [0xa]: 16 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Node 0x14 [Audio Input] wcaps 0x100d1b: Stereo Amp-In R/L
Amp-In caps: ofs=0x4a, nsteps=0x50, stepsize=0x03, mute=1
Amp-In vals: [0x4a 0x4a] [0x4a 0x4a] [0x4a 0x4a]
Converter: stream=0, channel=0
SDI-Select: 0
PCM:
rates [0x160]: 44100 48000 96000
bits [0xa]: 16 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Connection: 3
0x19* 0x1a 0x15
Node 0x15 [Audio Mixer] wcaps 0x20050b: Stereo Amp-In
Amp-In caps: ofs=0x4a, nsteps=0x4a, stepsize=0x03, mute=1
Amp-In vals: [0x00 0x00] [0x00 0x00]
Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Connection: 2
0x10 0x11
--
You are receiving this mail because:
You are the QA Contact for the bug.
You are the assignee for the bug.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freedesktop.org/archives/pulseaudio-bugs/attachments/20150518/0a283e78/attachment.html>
More information about the pulseaudio-bugs
mailing list