[pulseaudio-tickets] [Bug 42353] Mistreats headphone port with dysfunctional ALSA Master volume on ICH7

bugzilla-daemon at freedesktop.org bugzilla-daemon at freedesktop.org
Fri Sep 11 05:56:39 PDT 2015


https://bugs.freedesktop.org/show_bug.cgi?id=42353

--- Comment #16 from Raymond <superquad.vortex2 at gmail.com> ---
Table 40. Bit Mnemonic JS0 Interrupt Function JS1 TMR  JS0 TMR JS1 MD JS0 MD
JS1 ST  JS0 ST JS1 INT JS0 INT 0x0000 

JS1INT  JS0ST  JS1ST  JS0MD  JS1MD  JS0TMR  JS1TMR  JS0EQB  JS1EQB  JSMT [2:0]  

JS0INT  
This bit indicates that Pin JS0 has generated an interrupt. This bit remains
set until the software services the JS0 interrupt, that is, JS0 ISR should
clear this bit by writing a 0 to it. The interrupt to the system is an OR
combination of this bit and JS1INT. The actual interrupt implementation is
selected by the INTS bit (Register 0x76). It is also possible to generate a
software system interrupt by writing a 1 to this bit.  

Js1 Interrupt 
This bit indicates that Pin JS1 has generated an interrupt. This bit remains
set until the software services the JS1 interrupt, that is, JS1 ISR should
clear this bit by writing a 0 to it. See the JS0INT description for details.  

JS0 State 
This bit always reports the logic state of the JS0 pin.  

JS1 State 
This bit always reports the logic state of the JS1 pin.  

JS0 Mode 
This bit selects the operation mode for the JS0 pin. 0 = Jack sense mode
(default). 1 = Interrupt mode.  

JS1 Mode 
This bit selects the operation mode for the JS1 pin. 0 = Jack sense mode
(default). 1 = Interrupt mode.  

JS0 Timer Enable
If this bit is set to 1, JS0 must be high for >278 ms to be recognized.  

JS1 Timer Enable
If this bit is set to 1, JS1 must be high for >278 ms to be recognized.  


 JS0 EQ Bypass Enable 
This bit enables JS0 to control the EQ bypass. When this bit is set to 1, JS0 =
1 causes the EQ to be bypassed. 

JS1 EQ Bypass Enable 
This bit enables JS1 to control the EQ bypass. When this bit is set to 1, JS1 =
1 causes the EQ to be bypassed.  

JS Mute Enable Selector 

These three bits select and enable the jack sense muting action (see Table 41

-- 
You are receiving this mail because:
You are the QA Contact for the bug.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freedesktop.org/archives/pulseaudio-bugs/attachments/20150911/55d7e8c3/attachment-0001.html>


More information about the pulseaudio-bugs mailing list