[pulseaudio-tickets] [Bug 93946] Changing device profile to HDMI is reset to default after short delay

[bugzilla-daemon at freedesktop.org]

https://bugs.freedesktop.org/show_bug.cgi?id=93946

--- Comment #35 from Raymond <superquad.vortex2 at gmail.com> ---
But bit 8 of pin default of  headphone jack is set which imply no jack detect
circuit, unsolicited event is not enabled



Node 0x1b [Pin Complex] wcaps 0x40058f: Stereo Amp-In Amp-Out 
Control: name="Headphone Playback Switch", index=0, device=0 
ControlAmp: chs=3, dir=Out, idx=0, ofs=0 
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 
Amp-In vals: [0x00 0x00] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00,
mute=1 
Amp-Out vals: [0x80 0x80] Pincap 0x0001373e: IN OUT HP EAPD Detect Trigger 
Vref caps: HIZ 50 GRD 80 100 
EAPD 0x2: EAPD 
Pin Default 0x02214130: [Jack] HP Out at Ext Front Conn = 1/8, Color = Green
DefAssociation = 0x3, Sequence = 0x0 Misc = NO_PRESENCE 
Pin-ctls: 0xc0: OUT HP VREF_HIZ 
Unsolicited: tag=00, enabled=0 
Power states: D0 D1 D2 D3 EPSS 
Power: setting=D0, actual=D0 
Connection: 5

-- 
You are receiving this mail because:
You are the assignee for the bug.
You are the QA Contact for the bug.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freedesktop.org/archives/pulseaudio-bugs/attachments/20160203/a5c5da73/attachment-0001.html>