[pulseaudio-commits] r1605 - /branches/lennart/src/daemon/default.pa.in
svnmailer-noreply at 0pointer.de
svnmailer-noreply at 0pointer.de
Thu Aug 9 14:32:00 PDT 2007
Author: lennart
Date: Thu Aug 9 23:31:58 2007
New Revision: 1605
URL: http://0pointer.de/cgi-bin/viewcvs.cgi?rev=3D1605&root=3Dpulseaudio&vi=
ew=3Drev
Log:
update default configuration
Modified:
branches/lennart/src/daemon/default.pa.in
Modified: branches/lennart/src/daemon/default.pa.in
URL: http://0pointer.de/cgi-bin/viewcvs.cgi/branches/lennart/src/daemon/def=
ault.pa.in?rev=3D1605&root=3Dpulseaudio&r1=3D1604&r2=3D1605&view=3Ddiff
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D
--- branches/lennart/src/daemon/default.pa.in (original)
+++ branches/lennart/src/daemon/default.pa.in Thu Aug 9 23:31:58 2007
@@ -1,5 +1,4 @@
-#!@PA_BINARY@ -nF =
-
+#!@PA_BINARY@ -nF
#
# This file is part of PulseAudio.
#
@@ -17,8 +16,19 @@
# along with PulseAudio; if not, write to the Free Software Foundation,
# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
=
+.nofail
=
-### Load audio drivers statically
+### Load something into the sample cache
+load-sample-lazy x11-bell /usr/share/sounds/gtk-events/activate.wav
+load-sample-lazy pulse-hotplug /usr/share/sounds/email.wav
+load-sample-lazy pulse-coldplug /usr/share/sounds/login.wav
+load-sample-lazy pulse-access /usr/share/sounds/generic.wav
+
+.fail
+
+### Load audio drivers statically (it's probably better to not load
+### these drivers manually, but instead use module-hal-detect --
+### see below -- for doing this automatically)
#load-module module-alsa-sink
#load-module module-alsa-source device=3Dhw:1,0
#load-module module-oss device=3D"/dev/dsp" sink_name=3Doutput source_name=
=3Dinput
@@ -30,16 +40,8 @@
@HAVE_HAL_TRUE at load-module module-hal-detect
=
### Alternatively use the static hardware detection module (for systems th=
at
-### lack HAL support
+### lack HAL support)
@HAVE_HAL_FALSE at load-module module-detect
-
-### Load audio drivers automatically on access
-#add-autoload-sink output module-oss device=3D"/dev/dsp" sink_name=3Doutpu=
t source_name=3Dinput
-#add-autoload-source input module-oss device=3D"/dev/dsp" sink_name=3Doutp=
ut source_name=3Dinput
-#add-autoload-sink output module-oss-mmap device=3D"/dev/dsp" sink_name=3D=
output source_name=3Dinput
-#add-autoload-source input module-oss-mmap device=3D"/dev/dsp" sink_name=
=3Doutput source_name=3Dinput
-#add-autoload-sink output module-alsa-sink sink_name=3Doutput
-#add-autoload-source input module-alsa-source source_name=3Dinput
=
### Load several protocols
load-module module-esound-protocol-unix
@@ -65,15 +67,8 @@
### connected to dies, similar for sources
load-module module-rescue-streams
=
-### Make some devices default
-#set-default-sink output
-#set-default-source input
-
-.nofail
-
-### Load something to the sample cache
-load-sample x11-bell /usr/share/sounds/gtk-events/activate.wav
-#load-sample-dir-lazy /usr/share/sounds/*.wav
+### Automatically suspend sinks/sources that become idle for too long
+load-module module-suspend-on-idle
=
### Load X11 bell module
load-module module-x11-bell sample=3Dx11-bell
@@ -85,3 +80,7 @@
### Please keep in mind that the modules configured by paprefs might confl=
ict with manually
### loaded modules.
load-module module-gconf
+
+### Make some devices default
+#set-default-sink output
+#set-default-source input
More information about the pulseaudio-commits
mailing list