[pulseaudio-commits] src/pulsecore
Tanu Kaskinen
tanuk at kemper.freedesktop.org
Thu Aug 22 09:12:45 PDT 2013
src/pulsecore/sink.c | 120 ++++++++++++++++++++++++-------------------------
src/pulsecore/source.c | 106 +++++++++++++++++++++----------------------
2 files changed, 113 insertions(+), 113 deletions(-)
New commits:
commit 9aaf053dad2fef8d92ffd42510564b6268b2a857
Author: Tanu Kaskinen <tanu.kaskinen at linux.intel.com>
Date: Fri Aug 9 07:42:07 2013 +0300
sink, source: Reduce indentation level in *_update_rate()
diff --git a/src/pulsecore/sink.c b/src/pulsecore/sink.c
index 3cdabd4..2f5174e 100644
--- a/src/pulsecore/sink.c
+++ b/src/pulsecore/sink.c
@@ -1379,86 +1379,86 @@ void pa_sink_render_full(pa_sink *s, size_t length, pa_memchunk *result) {
/* Called from main thread */
bool pa_sink_update_rate(pa_sink *s, uint32_t rate, bool passthrough) {
bool ret = false;
+ uint32_t desired_rate = rate;
+ uint32_t default_rate = s->default_sample_rate;
+ uint32_t alternate_rate = s->alternate_sample_rate;
+ uint32_t idx;
+ pa_sink_input *i;
+ bool use_alternate = false;
- if (s->update_rate) {
- uint32_t desired_rate = rate;
- uint32_t default_rate = s->default_sample_rate;
- uint32_t alternate_rate = s->alternate_sample_rate;
- uint32_t idx;
- pa_sink_input *i;
- bool use_alternate = false;
+ if (!s->update_rate)
+ return false;
- if (PA_UNLIKELY(default_rate == alternate_rate)) {
- pa_log_warn("Default and alternate sample rates are the same.");
- return false;
- }
+ if (PA_UNLIKELY(default_rate == alternate_rate)) {
+ pa_log_warn("Default and alternate sample rates are the same.");
+ return false;
+ }
- if (PA_SINK_IS_RUNNING(s->state)) {
- pa_log_info("Cannot update rate, SINK_IS_RUNNING, will keep using %u Hz",
- s->sample_spec.rate);
- return false;
- }
+ if (PA_SINK_IS_RUNNING(s->state)) {
+ pa_log_info("Cannot update rate, SINK_IS_RUNNING, will keep using %u Hz",
+ s->sample_spec.rate);
+ return false;
+ }
- if (s->monitor_source) {
- if (PA_SOURCE_IS_RUNNING(s->monitor_source->state) == true) {
- pa_log_info("Cannot update rate, monitor source is RUNNING");
- return false;
- }
+ if (s->monitor_source) {
+ if (PA_SOURCE_IS_RUNNING(s->monitor_source->state) == true) {
+ pa_log_info("Cannot update rate, monitor source is RUNNING");
+ return false;
}
+ }
- if (PA_UNLIKELY (desired_rate < 8000 ||
- desired_rate > PA_RATE_MAX))
- return false;
+ if (PA_UNLIKELY (desired_rate < 8000 ||
+ desired_rate > PA_RATE_MAX))
+ return false;
- if (!passthrough) {
- pa_assert(default_rate % 4000 || default_rate % 11025);
- pa_assert(alternate_rate % 4000 || alternate_rate % 11025);
-
- if (default_rate % 4000) {
- /* default is a 11025 multiple */
- if ((alternate_rate % 4000 == 0) && (desired_rate % 4000 == 0))
- use_alternate=true;
- } else {
- /* default is 4000 multiple */
- if ((alternate_rate % 11025 == 0) && (desired_rate % 11025 == 0))
- use_alternate=true;
- }
+ if (!passthrough) {
+ pa_assert(default_rate % 4000 || default_rate % 11025);
+ pa_assert(alternate_rate % 4000 || alternate_rate % 11025);
- if (use_alternate)
- desired_rate = alternate_rate;
- else
- desired_rate = default_rate;
+ if (default_rate % 4000) {
+ /* default is a 11025 multiple */
+ if ((alternate_rate % 4000 == 0) && (desired_rate % 4000 == 0))
+ use_alternate=true;
} else {
- desired_rate = rate; /* use stream sampling rate, discard default/alternate settings */
+ /* default is 4000 multiple */
+ if ((alternate_rate % 11025 == 0) && (desired_rate % 11025 == 0))
+ use_alternate=true;
}
- if (desired_rate == s->sample_spec.rate)
- return false;
+ if (use_alternate)
+ desired_rate = alternate_rate;
+ else
+ desired_rate = default_rate;
+ } else {
+ desired_rate = rate; /* use stream sampling rate, discard default/alternate settings */
+ }
- if (!passthrough && pa_sink_used_by(s) > 0)
- return false;
+ if (desired_rate == s->sample_spec.rate)
+ return false;
- pa_log_debug("Suspending sink %s due to changing the sample rate.", s->name);
- pa_sink_suspend(s, true, PA_SUSPEND_INTERNAL);
+ if (!passthrough && pa_sink_used_by(s) > 0)
+ return false;
- if (s->update_rate(s, desired_rate) == true) {
- /* update monitor source as well */
- if (s->monitor_source && !passthrough)
- pa_source_update_rate(s->monitor_source, desired_rate, false);
- pa_log_info("Changed sampling rate successfully");
+ pa_log_debug("Suspending sink %s due to changing the sample rate.", s->name);
+ pa_sink_suspend(s, true, PA_SUSPEND_INTERNAL);
- PA_IDXSET_FOREACH(i, s->inputs, idx) {
- if (i->state == PA_SINK_INPUT_CORKED)
- pa_sink_input_update_rate(i);
- }
+ if (s->update_rate(s, desired_rate) == true) {
+ /* update monitor source as well */
+ if (s->monitor_source && !passthrough)
+ pa_source_update_rate(s->monitor_source, desired_rate, false);
+ pa_log_info("Changed sampling rate successfully");
- ret = true;
+ PA_IDXSET_FOREACH(i, s->inputs, idx) {
+ if (i->state == PA_SINK_INPUT_CORKED)
+ pa_sink_input_update_rate(i);
}
- pa_sink_suspend(s, false, PA_SUSPEND_INTERNAL);
+ ret = true;
}
- return ret ;
+ pa_sink_suspend(s, false, PA_SUSPEND_INTERNAL);
+
+ return ret;
}
/* Called from main thread */
diff --git a/src/pulsecore/source.c b/src/pulsecore/source.c
index 9c492c1..2c8d440 100644
--- a/src/pulsecore/source.c
+++ b/src/pulsecore/source.c
@@ -969,74 +969,74 @@ void pa_source_post_direct(pa_source*s, pa_source_output *o, const pa_memchunk *
/* Called from main thread */
bool pa_source_update_rate(pa_source *s, uint32_t rate, bool passthrough) {
bool ret = false;
+ uint32_t desired_rate = rate;
+ uint32_t default_rate = s->default_sample_rate;
+ uint32_t alternate_rate = s->alternate_sample_rate;
+ uint32_t idx;
+ pa_source_output *o;
+ bool use_alternate = false;
- if (s->update_rate) {
- uint32_t desired_rate = rate;
- uint32_t default_rate = s->default_sample_rate;
- uint32_t alternate_rate = s->alternate_sample_rate;
- uint32_t idx;
- pa_source_output *o;
- bool use_alternate = false;
+ if (!s->update_rate)
+ return false;
- if (PA_UNLIKELY(default_rate == alternate_rate)) {
- pa_log_warn("Default and alternate sample rates are the same.");
- return false;
- }
+ if (PA_UNLIKELY(default_rate == alternate_rate)) {
+ pa_log_warn("Default and alternate sample rates are the same.");
+ return false;
+ }
- if (PA_SOURCE_IS_RUNNING(s->state)) {
- pa_log_info("Cannot update rate, SOURCE_IS_RUNNING, will keep using %u Hz",
- s->sample_spec.rate);
- return false;
- }
+ if (PA_SOURCE_IS_RUNNING(s->state)) {
+ pa_log_info("Cannot update rate, SOURCE_IS_RUNNING, will keep using %u Hz",
+ s->sample_spec.rate);
+ return false;
+ }
- if (PA_UNLIKELY (desired_rate < 8000 ||
- desired_rate > PA_RATE_MAX))
- return false;
-
- if (!passthrough) {
- pa_assert(default_rate % 4000 || default_rate % 11025);
- pa_assert(alternate_rate % 4000 || alternate_rate % 11025);
-
- if (default_rate % 4000) {
- /* default is a 11025 multiple */
- if ((alternate_rate % 4000 == 0) && (desired_rate % 4000 == 0))
- use_alternate=true;
- } else {
- /* default is 4000 multiple */
- if ((alternate_rate % 11025 == 0) && (desired_rate % 11025 == 0))
- use_alternate=true;
- }
+ if (PA_UNLIKELY (desired_rate < 8000 ||
+ desired_rate > PA_RATE_MAX))
+ return false;
- if (use_alternate)
- desired_rate = alternate_rate;
- else
- desired_rate = default_rate;
+ if (!passthrough) {
+ pa_assert(default_rate % 4000 || default_rate % 11025);
+ pa_assert(alternate_rate % 4000 || alternate_rate % 11025);
+
+ if (default_rate % 4000) {
+ /* default is a 11025 multiple */
+ if ((alternate_rate % 4000 == 0) && (desired_rate % 4000 == 0))
+ use_alternate=true;
} else {
- desired_rate = rate; /* use stream sampling rate, discard default/alternate settings */
+ /* default is 4000 multiple */
+ if ((alternate_rate % 11025 == 0) && (desired_rate % 11025 == 0))
+ use_alternate=true;
}
- if (desired_rate == s->sample_spec.rate)
- return false;
+ if (use_alternate)
+ desired_rate = alternate_rate;
+ else
+ desired_rate = default_rate;
+ } else {
+ desired_rate = rate; /* use stream sampling rate, discard default/alternate settings */
+ }
- if (!passthrough && pa_source_used_by(s) > 0)
- return false;
+ if (desired_rate == s->sample_spec.rate)
+ return false;
- pa_log_debug("Suspending source %s due to changing the sample rate.", s->name);
- pa_source_suspend(s, true, PA_SUSPEND_INTERNAL);
+ if (!passthrough && pa_source_used_by(s) > 0)
+ return false;
- if (s->update_rate(s, desired_rate) == true) {
- pa_log_info("Changed sampling rate successfully ");
+ pa_log_debug("Suspending source %s due to changing the sample rate.", s->name);
+ pa_source_suspend(s, true, PA_SUSPEND_INTERNAL);
- PA_IDXSET_FOREACH(o, s->outputs, idx) {
- if (o->state == PA_SOURCE_OUTPUT_CORKED)
- pa_source_output_update_rate(o);
- }
- ret = true;
- }
+ if (s->update_rate(s, desired_rate) == true) {
+ pa_log_info("Changed sampling rate successfully ");
- pa_source_suspend(s, false, PA_SUSPEND_INTERNAL);
+ PA_IDXSET_FOREACH(o, s->outputs, idx) {
+ if (o->state == PA_SOURCE_OUTPUT_CORKED)
+ pa_source_output_update_rate(o);
+ }
+ ret = true;
}
+ pa_source_suspend(s, false, PA_SUSPEND_INTERNAL);
+
return ret;
}
More information about the pulseaudio-commits
mailing list