[pulseaudio-commits] [Git][pulseaudio/pulseaudio][master] 19 commits: Fix typo: controling -> controlling
Arun Raghavan
gitlab at gitlab.freedesktop.org
Wed Sep 19 09:40:50 UTC 2018
Arun Raghavan pushed to branch master at PulseAudio / pulseaudio
Commits:
b5fd854e by Joseph Herlant at 2018-09-17T16:49:13Z
Fix typo: controling -> controlling
- - - - -
23371322 by Joseph Herlant at 2018-09-17T16:49:55Z
Fix typo: Retreive -> Retrieve
- - - - -
d7061315 by Joseph Herlant at 2018-09-17T16:50:43Z
Fix typo: occurrencies -> occurrences
- - - - -
08d0dc69 by Joseph Herlant at 2018-09-17T16:52:36Z
Fix typo: occured -> occurred
- - - - -
61727fd2 by Joseph Herlant at 2018-09-17T16:53:37Z
Fix typo: dependancy -> dependency
- - - - -
517c727a by Joseph Herlant at 2018-09-17T16:54:36Z
Fix typo: Doulbe -> Double
- - - - -
83c3384d by Joseph Herlant at 2018-09-17T16:55:37Z
Fix typo: Extention -> Extension
- - - - -
3fb7e9bc by Joseph Herlant at 2018-09-17T16:56:41Z
Fix typo: differnt -> different
- - - - -
d6e7aa2b by Joseph Herlant at 2018-09-17T16:57:20Z
Fix typo: explicitely -> explicitly
- - - - -
01d50b8c by Joseph Herlant at 2018-09-17T16:58:25Z
Fix typo: properies -> properties
- - - - -
502293ff by Joseph Herlant at 2018-09-17T16:59:03Z
Fix typo: distuingish -> distinguish
- - - - -
7aa2d9e5 by Joseph Herlant at 2018-09-17T16:59:38Z
Fix typo: recieved -> received
- - - - -
87a41d7b by Joseph Herlant at 2018-09-17T17:00:14Z
Fix typo: comming -> coming
- - - - -
c1acdfee by Joseph Herlant at 2018-09-17T17:00:57Z
Fix typo: prefered -> preferred
- - - - -
93c07da3 by Joseph Herlant at 2018-09-17T17:01:46Z
Fix typo: definately -> definitely
- - - - -
61d35fd2 by Joseph Herlant at 2018-09-17T17:02:56Z
Fix typo: transmited -> transmitted
- - - - -
223b409c by Joseph Herlant at 2018-09-17T17:03:55Z
Fix typo: substract -> subtract
- - - - -
32859fbe by Joseph Herlant at 2018-09-17T17:04:30Z
Fix typo: managable -> manageable
- - - - -
12f34350 by Joseph Herlant at 2018-09-17T17:05:34Z
Fix typo: documenation -> documentation
- - - - -
16 changed files:
- NEWS
- configure.ac
- doxygen/doxygen.conf.in
- src/Makefile.am
- src/modules/alsa/mixer/paths/analog-input.conf.common
- src/modules/bluetooth/module-bluez5-device.c
- src/modules/echo-cancel/adrian-aec.c
- src/modules/echo-cancel/adrian-aec.h
- src/modules/module-filter-apply.c
- src/modules/raop/module-raop-discover.c
- src/modules/raop/raop-client.c
- src/modules/raop/raop-sink.c
- src/pulse/simple.c
- src/pulsecore/dynarray.h
- src/pulsecore/rtkit.h
- src/utils/qpaeq
Changes:
=====================================
NEWS
=====================================
@@ -410,7 +410,7 @@ Changes at a glance:
* Better support for multichannel and 2.1 profiles
* Protocol optimisations
* Remap optimisations
- * Lots of other enhancements, bug fixes, and documenation and i18n updates
+ * Lots of other enhancements, bug fixes, and documentation and i18n updates
Detailed change log:
@@ -485,7 +485,7 @@ Changes at a glance:
* Improved float->s16 and s16->float sample conversion for ARM NEON
* "Available" flag for card profiles
* Removed module-dbus-protocol from the default configuration
- * Lots of other enhancements, bug fixes, and documenation and i18n updates
+ * Lots of other enhancements, bug fixes, and documentation and i18n updates
Detailed change log:
@@ -550,7 +550,7 @@ Changes at a glance:
* Echo canceller infrastructure fixes
* Bash and zsh completion for command line tools
* Solaris and OS X fixes
- * Lots of other enhancements, bug fixes, and documenation and i18n updates
+ * Lots of other enhancements, bug fixes, and documentation and i18n updates
Detailed change log:
=====================================
configure.ac
=====================================
@@ -1682,7 +1682,7 @@ that you enable D-Bus support if your platform supports it.
Many parts of PulseAudio use D-Bus, from ConsoleKit interaction
to the Device Reservation Protocol to speak to JACK, Bluetooth
support and even a native control protocol for communicating and
-controling the PulseAudio daemon itself.
+controlling the PulseAudio daemon itself.
===== WARNING WARNING WARNING WARNING WARNING WARNING WARNING =====
"
fi
=====================================
doxygen/doxygen.conf.in
=====================================
@@ -1768,7 +1768,7 @@ UML_LOOK = NO
# the class node. If there are many fields or methods and many nodes the
# graph may become too big to be useful. The UML_LIMIT_NUM_FIELDS
# threshold limits the number of items for each type to make the size more
-# managable. Set this to 0 for no limit. Note that the threshold may be
+# manageable. Set this to 0 for no limit. Note that the threshold may be
# exceeded by 50% before the limit is enforced.
UML_LIMIT_NUM_FIELDS = 10
=====================================
src/Makefile.am
=====================================
@@ -780,7 +780,7 @@ endif
libpulsecommon_ at PA_MAJORMINOR@_la_CFLAGS += $(GLIB20_CFLAGS) $(GTK30_CFLAGS)
## Please note that libpulsecommon implicitly also depends on<
-## libpulse! i.e. we have a cyclic dependancy here. Which is intended
+## libpulse! i.e. we have a cyclic dependency here. Which is intended
## since libpulse only includes stable, official APIs, while
## libpulsecommon only includes unofficial APIs.
=====================================
src/modules/alsa/mixer/paths/analog-input.conf.common
=====================================
@@ -15,7 +15,7 @@
; Mixer path for PulseAudio's ALSA backend, common elements for all
; input paths. If multiple options by the same id are discovered they
-; will be suffixed with a number to distuingish them, in the same
+; will be suffixed with a number to distinguish them, in the same
; order they appear here.
;
; Source selection should use the following names:
=====================================
src/modules/bluetooth/module-bluez5-device.c
=====================================
@@ -2212,7 +2212,7 @@ static void handle_transport_state_change(struct userdata *u, struct pa_bluetoot
/* When the ofono backend resumes source or sink when in the audio gateway role, the
* state of source or sink may already be RUNNING before the transport is acquired via
* hf_audio_agent_new_connection(), so the pa_source_suspend() call will not lead to a
- * state change message. In this case we explicitely need to signal the I/O thread to
+ * state change message. In this case we explicitly need to signal the I/O thread to
* set up the stream. */
if (PA_SOURCE_IS_OPENED(u->source->state))
pa_asyncmsgq_send(u->source->asyncmsgq, PA_MSGOBJECT(u->source), PA_SOURCE_MESSAGE_SETUP_STREAM, NULL, 0, NULL);
=====================================
src/modules/echo-cancel/adrian-aec.c
=====================================
@@ -116,7 +116,7 @@ void AEC_done(AEC *a) {
// Adrian soft decision DTD
// (Dual Average Near-End to Far-End signal Ratio DTD)
-// This algorithm uses exponential smoothing with differnt
+// This algorithm uses exponential smoothing with different
// ageing parameters to get fast and slow near-end and far-end
// signal averages. The ratio of NFRs term
// (dfast / xfast) / (dslow / xslow) is used to compute the stepsize
=====================================
src/modules/echo-cancel/adrian-aec.h
=====================================
@@ -96,7 +96,7 @@
/* Double Talk Detector Speaker/Microphone Threshold. Range <=1
* Large value (M0dB) is good for Single-Talk Echo cancellation,
- * small value (M12dB) is good for Doulbe-Talk AEC */
+ * small value (M12dB) is good for Double-Talk AEC */
#define GeigelThreshold M6dB
/* for Non Linear Processor. Range >0 to 1. Large value (M0dB) is good
@@ -286,7 +286,7 @@ public:
#endif
-// Extention in taps to reduce mem copies
+// Extension in taps to reduce mem copies
#define NLMS_EXT (10*8)
// block size in taps to optimize DTD calculation
=====================================
src/modules/module-filter-apply.c
=====================================
@@ -162,7 +162,7 @@ static const char* get_filter_parameters(pa_object *o, const char *want, bool is
/* This function is used to set or unset the filter related stream properties. This is necessary
* if a stream does not have filter.apply set and is manually moved to a filter sink or source.
- * In this case, the properies must be temporarily set and removed when the stream is moved away
+ * In this case, the properties must be temporarily set and removed when the stream is moved away
* from the filter. */
static void set_filter_properties(pa_proplist *pl, struct filter *filter, bool set_properties) {
char *prop_parameters;
=====================================
src/modules/raop/module-raop-discover.c
=====================================
@@ -204,7 +204,7 @@ static void resolver_cb(
/* Transport protocol:
* - TCP = only TCP,
* - UDP = only UDP,
- * - TCP,UDP = both supported (UDP should be prefered) */
+ * - TCP,UDP = both supported (UDP should be preferred) */
pa_xfree(tp);
if (pa_str_in_list(value, ",", "UDP"))
tp = pa_xstrdup("UDP");
=====================================
src/modules/raop/raop-client.c
=====================================
@@ -232,7 +232,7 @@ static inline void bit_writer(uint8_t **buffer, uint8_t *bit_pos, size_t *size,
if (!data_bit_len)
return;
- /* If bit pos is zero, we will definately use at least one bit from the current byte so size increments. */
+ /* If bit pos is zero, we will definitely use at least one bit from the current byte so size increments. */
if (!*bit_pos)
*size += 1;
@@ -555,7 +555,7 @@ static size_t build_udp_sync_packet(pa_raop_client *c, uint32_t stamp, uint32_t
buffer[0] |= 0x10;
stamp -= delay;
buffer[1] = htonl(stamp);
- /* Set the transmited timestamp to current time. */
+ /* Set the transmitted timestamp to current time. */
transmitted = timeval_to_ntp(pa_rtclock_get(&tv));
buffer[2] = htonl(transmitted >> 32);
buffer[3] = htonl(transmitted & 0xffffffff);
=====================================
src/modules/raop/raop-sink.c
=====================================
@@ -106,7 +106,7 @@ static void raop_state_cb(pa_raop_state_t state, void *userdata) {
pa_assert(u);
- pa_log_debug("State change recieved, informing IO thread...");
+ pa_log_debug("State change received, informing IO thread...");
pa_asyncmsgq_post(u->thread_mq.inq, PA_MSGOBJECT(u->sink), PA_SINK_MESSAGE_SET_RAOP_STATE, PA_INT_TO_PTR(state), 0, NULL, NULL);
}
@@ -248,7 +248,7 @@ static int sink_set_state_in_io_thread_cb(pa_sink *s, pa_sink_state_t new_state,
case PA_SINK_IDLE:
pa_log_debug("RAOP: IDLE");
- /* Issue a FLUSH if we're comming from running state */
+ /* Issue a FLUSH if we're coming from running state */
if (s->thread_info.state == PA_SINK_RUNNING) {
pa_rtpoll_set_timer_disabled(u->rtpoll);
pa_raop_client_flush(u->raop);
=====================================
src/pulse/simple.c
=====================================
@@ -474,7 +474,7 @@ pa_usec_t pa_simple_get_latency(pa_simple *p, int *rerror) {
* been consumed, which means that pa_stream_get_latency() will
* return too large values, because the whole size of the
* partially read chunk is included in the latency. Therefore,
- * we need to substract the already-read amount from the
+ * we need to subtract the already-read amount from the
* latency. */
already_read = pa_bytes_to_usec(p->read_index, pa_stream_get_sample_spec(p->stream));
=====================================
src/pulsecore/dynarray.h
=====================================
@@ -54,7 +54,7 @@ void *pa_dynarray_last(pa_dynarray *array);
int pa_dynarray_remove_by_index(pa_dynarray *array, unsigned i);
/* Returns -PA_ERR_NOENTITY if p is not found in the array, and zero
- * otherwise. If the array contains multiple occurrencies of p, only one of
+ * otherwise. If the array contains multiple occurrences of p, only one of
* them is removed (and it's unspecified which one). */
int pa_dynarray_remove_by_data(pa_dynarray *array, void *p);
=====================================
src/pulsecore/rtkit.h
=====================================
@@ -61,7 +61,7 @@ int rtkit_make_high_priority(DBusConnection *system_bus, pid_t thread, int nice_
*/
int rtkit_get_max_realtime_priority(DBusConnection *system_bus);
-/* Retreive the minimum value of nice level available. High prio requests
+/* Retrieve the minimum value of nice level available. High prio requests
* below this value will fail. The returned value is a negative errno
* style error code, or 0 on success.*/
int rtkit_get_min_nice_level(DBusConnection *system_bus, int* min_nice_level);
=====================================
src/utils/qpaeq
=====================================
@@ -25,7 +25,7 @@ try:
except ImportError as e:
sys.stderr.write('There was an error importing needed libraries\n'
'Make sure you have qt5 and dbus-python installed\n'
- 'The error that occured was:\n'
+ 'The error that occurred was:\n'
'\t%s\n' % (str(e)))
sys.exit(-1)
View it on GitLab: https://gitlab.freedesktop.org/pulseaudio/pulseaudio/compare/34153758494ae1554419832c0c4047467859516d...12f3435025d9fd0278db80827d1e580cc3ac4a8b
--
View it on GitLab: https://gitlab.freedesktop.org/pulseaudio/pulseaudio/compare/34153758494ae1554419832c0c4047467859516d...12f3435025d9fd0278db80827d1e580cc3ac4a8b
You're receiving this email because of your account on gitlab.freedesktop.org.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.freedesktop.org/archives/pulseaudio-commits/attachments/20180919/a345e179/attachment-0001.html>
More information about the pulseaudio-commits
mailing list