[pulseaudio-discuss] Help in setting up PA... SOLVED
Richard Geddes
rich.geddes at verizon.net
Tue Jun 3 14:56:16 PDT 2008
de nada... fue un placer... tambien aprendi algo...
Saludos
R
Juan A Fuentes Bermudez wrote:
> hi, very very thank you,
>
> now i am using the last configuration that you say me, now are 3 cards
> actives, only the HDMI is not working via PA,
>
> i will trying coment and uncoment one to one devices, i am think that
> HDMI device only have output not have input
>
> very very thank my friend
>
> you have a spanish jamon fron my :)
>
>
> ----- Original Message -----
>
> *From:* Richard Geddes <mailto:rich.geddes at verizon.net>
> *To:* General PulseAudio Discussion
> <mailto:pulseaudio-discuss at mail.0pointer.de>
> *Sent:* Tuesday, June 03, 2008 10:24 PM
> *Subject:* Re: [pulseaudio-discuss] Help in setting up PA... SOLVED
>
> ok...
>
> 1) The/var/log/messages indicates that you are running the pa
> server as root (you say as well) and it also says the pa server is
> not intended to be run as root... so you might want to change to a
> regular user and use sudo for root related activities.
>
> 2) I think that the terjeta 3 requires some special parameters ...
> similar to tarjeta 2. I'm not familiar with ice1724 device
> driver, but you may want to try the same setup for tarjeta 3 as
> for tarjeta 2. This is just a guess... anyone with knowledge
> about how to setup an ice1724 source/sink in pa... please speak up
> now...
>
> 3) Of course, it looks like tarjeta 3 was identified by the
> module-detect/module-hal-detect. What we've done is disable this
> and tried to set the sources/sinks manually.
> module-detect/module-hal-detect seems to be an all or nothing
> proposition... if anyone knows of a way to auto-detect specific
> devices and manually set others in the same config file... please
> speak up now.
>
> Well, you might want to try this (once again, a guess):
>
> a) re-enable the auto-detect - we know this will detect
> tarjeta 0 and 3, and not tarjeta 1 and 2
> b) add only the manual configuration for tarjeta 2, after that
>
>
> So your default.pa file would contain:
>
> ### Automatically load driver modules depending on the hardware
> available
> .ifexists module-hal-detect.so
> load-module module-hal-detect
> .else
> ### Alternatively use the static hardware detection module (for
> systems that
> ### lack HAL support)
> load-module module-detect
> .endif
>
> # Load the devices:
> #load-module module-alsa-sink sink_name=nvidia_out device=hw:0
> #load-module module-alsa-source source_name=nvidia_in device=hw:0
>
> #load-module module-alsa-sink sink_name=hdmi_out device=hw:1
> #load-module module-alsa-source source_name=hdmi_in device=hw:1
>
> load-module module-alsa-sink sink_name=ewx2496_out device=hw:2
> channels=10
> channel_map=left,right,aux0,aux1,aux2,aux3,aux4,aux5,aux6,aux7
> load-module module-alsa-source source_name=ewx2496_in device=hw:2
> channels=12
> channel_map=left,right,aux0,aux1,aux2,aux3,aux4,aux5,aux6,aux7,aux8,aux9
>
> #load-module module-alsa-sink sink_name=e192m_out device=hw:3
> #load-module module-alsa-source source_name=e192m_in device=hw:3
>
> # Select default device
> #set-default-sink nvidia_out
> #set-default-source nvidia_in
>
> Let's see if module-hal-detect/module-detect allows manual loading
> of sources/sinks.
>
>
> R
>
> Juan A Fuentes Bermudez wrote:
>> hi, the problem is partial solved
>>
>> i an coment and paste the module taht you say my
>>
>> the pa server not start after reboot,
>>
>> i am coment and uncoment one to one, to discart waht is the card
>> tthat cause problem ,
>>
>> # Load the devices:
>> load-module module-alsa-sink sink_name=nvidia_out device=hw:0
>> load-module module-alsa-source source_name=nvidia_in device=hw:0
>>
>> #load-module module-alsa-sink sink_name=hdmi_out device=hw:1
>> #load-module module-alsa-source source_name=hdmi_in device=hw:1
>>
>> load-module module-alsa-sink sink_name=ewx2496_out device=hw:2
>> channels=10
>> channel_map=left,right,aux0,aux1,aux2,aux3,aux4,aux5,aux6,aux7
>> load-module module-alsa-source source_name=ewx2496_in device=hw:2
>> channels=12
>> channel_map=left,right,aux0,aux1,aux2,aux3,aux4,aux5,aux6,aux7,aux8,aux9
>>
>> #load-module module-alsa-sink sink_name=e192m_out device=hw:3
>> #load-module module-alsa-source source_name=e192m_in device=hw:3
>> in this mode, load pa server, and in the padevchooser apear the
>> ewx2496 card :) very happy
>>
>> when un coment the e192 card, again pa server not start same when
>> uncoment hdmi card
>>
>> i like active also e192 card, is posible?
>>
>>
>> i am to paste this info, this is the first mail i want to send to
>> list :
>>
>> hi, the server not start, always i am login as root
>>
>> can you test the information?
>>
>>
>> # grep pulse /var/log/messages
>> Jun 2 14:39:39 64-1 pulseaudio[6430]: main.c: This program is
>> not intended to be run as root (unless --system is specified).
>> Jun 2 14:39:39 64-1 pulseaudio[6430]: alsa-util.c: Device
>> front:3 doesn't support sample format s16le, changed to s32le.
>> Jun 2 14:39:39 64-1 pulseaudio[6430]: alsa-util.c: Device
>> front:3 doesn't support sample format s16le, changed to s32le.
>> Jun 2 14:39:39 64-1 pulseaudio[6430]: alsa-util.c: Cannot find
>> fallback mixer control "Mic".
>> Jun 2 14:39:39 64-1 pulseaudio[6430]: alsa-util.c: Device hw:2
>> doesn't support 2 channels, changed to 10.
>> Jun 2 14:39:39 64-1 pulseaudio[6430]: alsa-util.c: Device hw:2
>> doesn't support sample format s16le, changed to s32le.
>> Jun 2 14:39:39 64-1 pulseaudio[6430]: alsa-util.c: Cannot find
>> fallback mixer control "PCM".
>> Jun 2 14:39:39 64-1 pulseaudio[6430]: alsa-util.c: Device hw:2
>> doesn't support 2 channels, changed to 12.
>> Jun 2 14:39:39 64-1 pulseaudio[6430]: alsa-util.c: Device hw:2
>> doesn't support sample format s16le, changed to s32le.
>> Jun 2 14:39:39 64-1 pulseaudio[6430]: alsa-util.c: Cannot find
>> fallback mixer control "Mic".
>> Jun 2 17:33:48 64-1 pulseaudio[6428]: main.c: This program is
>> not intended to be run as root (unless --system is specified).
>> Jun 2 17:33:48 64-1 pulseaudio[6428]: alsa-util.c: Device
>> front:3 doesn't support sample format s16le, changed to s32le.
>> Jun 2 17:33:48 64-1 pulseaudio[6428]: alsa-util.c: Device
>> front:3 doesn't support sample format s16le, changed to s32le.
>> Jun 2 17:33:48 64-1 pulseaudio[6428]: alsa-util.c: Cannot find
>> fallback mixer control "Mic".
>> Jun 2 17:33:48 64-1 pulseaudio[6428]: alsa-util.c: Device hw:0
>> doesn't support 2 channels, changed to 10.
>> Jun 2 17:33:48 64-1 pulseaudio[6428]: alsa-util.c: Device hw:0
>> doesn't support sample format s16le, changed to s32le.
>> Jun 2 17:33:48 64-1 pulseaudio[6428]: alsa-util.c: Cannot find
>> fallback mixer control "PCM".
>> Jun 2 17:33:48 64-1 pulseaudio[6428]: alsa-util.c: Device hw:0
>> doesn't support 2 channels, changed to 12.
>> Jun 2 17:33:48 64-1 pulseaudio[6428]: alsa-util.c: Device hw:0
>> doesn't support sample format s16le, changed to s32le.
>> Jun 2 17:33:48 64-1 pulseaudio[6428]: alsa-util.c: Cannot find
>> fallback mixer control "Mic".
>> Jun 2 17:53:14 64-1 pulseaudio[6428]: module-x11-publish.c:
>> PulseAudio information vanished from X11!
>> Jun 3 00:37:48 64-1 pulseaudio[6479]: main.c: This program is
>> not intended to be run as root (unless --system is specified).
>> Jun 3 00:37:48 64-1 pulseaudio[6479]: alsa-util.c: Device
>> front:3 doesn't support sample format s16le, changed to s32le.
>> Jun 3 00:37:48 64-1 pulseaudio[6479]: alsa-util.c: Device
>> front:3 doesn't support sample format s16le, changed to s32le.
>> Jun 3 00:37:48 64-1 pulseaudio[6479]: alsa-util.c: Cannot find
>> fallback mixer control "Mic".
>> Jun 3 00:37:48 64-1 pulseaudio[6479]: alsa-util.c: Device hw:2
>> doesn't support 2 channels, changed to 10.
>> Jun 3 00:37:48 64-1 pulseaudio[6479]: alsa-util.c: Device hw:2
>> doesn't support sample format s16le, changed to s32le.
>> Jun 3 00:37:48 64-1 pulseaudio[6479]: alsa-util.c: Cannot find
>> fallback mixer control "PCM".
>> Jun 3 00:37:48 64-1 pulseaudio[6479]: alsa-util.c: Device hw:2
>> doesn't support 2 channels, changed to 12.
>> Jun 3 00:37:48 64-1 pulseaudio[6479]: alsa-util.c: Device hw:2
>> doesn't support sample format s16le, changed to s32le.
>> Jun 3 00:37:48 64-1 pulseaudio[6479]: alsa-util.c: Cannot find
>> fallback mixer control "Mic".
>> Jun 3 20:12:01 64-1 pulseaudio[6418]: main.c: This program is
>> not intended to be run as root (unless --system is specified).
>> Jun 3 20:12:02 64-1 pulseaudio[6418]: alsa-util.c: Device
>> front:3 doesn't support sample format s16le, changed to s32le.
>> Jun 3 20:12:02 64-1 pulseaudio[6418]: alsa-util.c: Device
>> front:3 doesn't support sample format s16le, changed to s32le.
>> Jun 3 20:12:02 64-1 pulseaudio[6418]: alsa-util.c: Cannot find
>> fallback mixer control "Mic".
>> Jun 3 20:12:02 64-1 pulseaudio[6418]: alsa-util.c: Device hw:2
>> doesn't support 2 channels, changed to 10.
>> Jun 3 20:12:02 64-1 pulseaudio[6418]: alsa-util.c: Device hw:2
>> doesn't support sample format s16le, changed to s32le.
>> Jun 3 20:12:02 64-1 pulseaudio[6418]: alsa-util.c: Cannot find
>> fallback mixer control "PCM".
>> Jun 3 20:12:02 64-1 pulseaudio[6418]: alsa-util.c: Device hw:2
>> doesn't support 2 channels, changed to 12.
>> Jun 3 20:12:02 64-1 pulseaudio[6418]: alsa-util.c: Device hw:2
>> doesn't support sample format s16le, changed to s32le.
>> Jun 3 20:12:02 64-1 pulseaudio[6418]: alsa-util.c: Cannot find
>> fallback mixer control "Mic".
>> Jun 3 20:25:33 64-1 pulseaudio[6445]: main.c: This program is
>> not intended to be run as root (unless --sy
>>
>>
>>
>>
>>
>>
>>
>>
>> this is my curent default.pa
>>
>>
>>
>> #!/usr/bin/pulseaudio -nF
>> #
>> # This file is part of PulseAudio.
>> #
>> # PulseAudio is free software; you can redistribute it and/or
>> modify it
>> # under the terms of the GNU Lesser General Public License as
>> published by
>> # the Free Software Foundation; either version 2 of the License, or
>> # (at your option) any later version.
>> #
>> # PulseAudio is distributed in the hope that it will be useful, but
>> # WITHOUT ANY WARRANTY; without even the implied warranty of
>> # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
>> # General Public License for more details.
>> #
>> # You should have received a copy of the GNU Lesser General
>> Public License
>> # along with PulseAudio; if not, write to the Free Software
>> Foundation,
>> # Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
>>
>> .nofail
>>
>> ### Load something into the sample cache
>> #load-sample-lazy x11-bell /usr/share/sounds/gtk-events/activate.wav
>> load-sample-lazy pulse-hotplug /usr/share/sounds/startup3.wav
>> #load-sample-lazy pulse-coldplug /usr/share/sounds/startup3.wav
>> #load-sample-lazy pulse-access /usr/share/sounds/generic.wav
>>
>> .fail
>>
>> ### Load audio drivers statically (it's probably better to not load
>> ### these drivers manually, but instead use module-hal-detect --
>> ### see below -- for doing this automatically)
>> #load-module module-alsa-sink
>> #load-module module-alsa-source device=hw:1,0
>> #load-module module-oss device="/dev/dsp" sink_name=output
>> source_name=input
>> #load-module module-oss-mmap device="/dev/dsp" sink_name=output
>> source_name=input
>> #load-module module-null-sink
>> #load-module module-pipe-sink
>>
>> ### Automatically load driver modules depending on the hardware
>> available
>> #.ifexists module-hal-detect.so
>> #load-module module-hal-detect
>> #.else
>> ### Alternatively use the static hardware detection module (for
>> systems that
>> ### lack HAL support)
>> #load-module module-detect
>> #.endif
>>
>> # Load the devices:
>> load-module module-alsa-sink sink_name=nvidia_out device=hw:0
>> load-module module-alsa-source source_name=nvidia_in device=hw:0
>>
>> load-module module-alsa-sink sink_name=hdmi_out device=hw:1
>> load-module module-alsa-source source_name=hdmi_in device=hw:1
>>
>> load-module module-alsa-sink sink_name=ewx2496_out device=hw:2
>> channels=10
>> channel_map=left,right,aux0,aux1,aux2,aux3,aux4,aux5,aux6,aux7
>> load-module module-alsa-source source_name=ewx2496_in device=hw:2
>> channels=12
>> channel_map=left,right,aux0,aux1,aux2,aux3,aux4,aux5,aux6,aux7,aux8,aux9
>>
>> load-module module-alsa-sink sink_name=e192m_out device=hw:3
>> load-module module-alsa-source source_name=e192m_in device=hw:3
>>
>> # Select default device
>> set-default-sink nvidia_out
>> set-default-source nvidia_in
>>
>>
>>
>> ## Load several protocols
>> .ifexists module-esound-protocol-unix.so
>> load-module module-esound-protocol-unix
>> .endif
>> load-module module-native-protocol-unix
>>
>> ### Network access (may be configured with paprefs, so leave this
>> commented
>> ### here if you plan to use paprefs)
>> #load-module module-esound-protocol-tcp
>> #load-module module-native-protocol-tcp
>> #load-module module-zeroconf-publish
>>
>> ### Load the RTP reciever module (also configured via paprefs,
>> see above)
>> #load-module module-rtp-recv
>>
>> ### Load the RTP sender module (also configured via paprefs, see
>> above)
>> #load-module module-null-sink sink_name=rtp format=s16be
>> channels=2 rate=44100 description="RTP Multicast Sink"
>> #load-module module-rtp-send source=rtp.monitor
>>
>> ### Automatically restore the volume of playback streams
>> load-module module-volume-restore
>>
>> ### Automatically restore the default sink/source when changed by
>> the user during runtime
>> load-module module-default-device-restore
>>
>> ### Automatically move streams to the default sink if the sink
>> they are
>> ### connected to dies, similar for sources
>> load-module module-rescue-streams
>>
>> ### Automatically suspend sinks/sources that become idle for too long
>> load-module module-suspend-on-idle
>>
>> ### Load X11 bell module
>> #load-module module-x11-bell sample=x11-bell
>>
>> ### Register ourselves in the X11 session manager
>> # Deactivated by default, to avoid deadlock when PA is started as
>> esd from gnome-session
>> # Instead we load this via /etc/xdg/autostart/ and "pactl
>> load-module" now
>> # load-module module-x11-xsmp
>>
>> ### Load additional modules from GConf settings. This can be
>> configured with the paprefs tool.
>> ### Please keep in mind that the modules configured by paprefs
>> might conflict with manually
>> ### loaded modules.
>> .ifexists module-gconf.so
>> .nofail
>> load-module module-gconf
>> .fail
>> .endif
>>
>> ### Publish connection data in the X11 root window
>> .ifexists module-x11-publish.so
>> .nofail
>> load-module module-x11-publish
>> .fail
>> .endif
>>
>> ### Make some devices default
>> #set-default-sink output
>> #set-default-source input
>> ------------------------------------------------------------------------
>>
>> _______________________________________________
>> pulseaudio-discuss mailing list
>> pulseaudio-discuss at mail.0pointer.de
>> https://tango.0pointer.de/mailman/listinfo/pulseaudio-discuss
>>
>
> ------------------------------------------------------------------------
> _______________________________________________
> pulseaudio-discuss mailing list
> pulseaudio-discuss at mail.0pointer.de
> https://tango.0pointer.de/mailman/listinfo/pulseaudio-discuss
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> pulseaudio-discuss mailing list
> pulseaudio-discuss at mail.0pointer.de
> https://tango.0pointer.de/mailman/listinfo/pulseaudio-discuss
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freedesktop.org/archives/pulseaudio-discuss/attachments/20080603/b7dd6aed/attachment.htm>
More information about the pulseaudio-discuss
mailing list