[pulseaudio-discuss] [OT] Re: Help in setting up PA... SOLVED
Richard Geddes
rich.geddes at verizon.net
Wed Jun 4 07:38:12 PDT 2008
mi madre es peruana y mi padre es escosés pero la mayoría de mi vida he
pasado en los estados unidos... asi que, para evitar malentendidos, uso
ingles en discuccioes tecnicas
Saludos
R
Juan A Fuentes Bermudez wrote:
> no me digas que hablas español?
>
> saludos
>
>
>
>
> ----- Original Message -----
> *From:* Richard Geddes <mailto:rich.geddes at verizon.net>
> *To:* General PulseAudio Discussion
> <mailto:pulseaudio-discuss at mail.0pointer.de>
> *Sent:* Tuesday, June 03, 2008 11:56 PM
> *Subject:* Re: [pulseaudio-discuss] Help in setting up PA... SOLVED
>
> de nada... fue un placer... tambien aprendi algo...
>
> Saludos
> R
>
> Juan A Fuentes Bermudez wrote:
>> hi, very very thank you,
>>
>> now i am using the last configuration that you say me, now are 3
>> cards actives, only the HDMI is not working via PA,
>>
>> i will trying coment and uncoment one to one devices, i am think
>> that HDMI device only have output not have input
>>
>> very very thank my friend
>>
>> you have a spanish jamon fron my :)
>>
>>
>> ----- Original Message -----
>>
>> *From:* Richard Geddes <mailto:rich.geddes at verizon.net>
>> *To:* General PulseAudio Discussion
>> <mailto:pulseaudio-discuss at mail.0pointer.de>
>> *Sent:* Tuesday, June 03, 2008 10:24 PM
>> *Subject:* Re: [pulseaudio-discuss] Help in setting up PA...
>> SOLVED
>>
>> ok...
>>
>> 1) The/var/log/messages indicates that you are running the pa
>> server as root (you say as well) and it also says the pa
>> server is not intended to be run as root... so you might want
>> to change to a regular user and use sudo for root related
>> activities.
>>
>> 2) I think that the terjeta 3 requires some special
>> parameters ... similar to tarjeta 2. I'm not familiar with
>> ice1724 device driver, but you may want to try the same setup
>> for tarjeta 3 as for tarjeta 2. This is just a guess...
>> anyone with knowledge about how to setup an ice1724
>> source/sink in pa... please speak up now...
>>
>> 3) Of course, it looks like tarjeta 3 was identified by the
>> module-detect/module-hal-detect. What we've done is disable
>> this and tried to set the sources/sinks manually.
>> module-detect/module-hal-detect seems to be an all or nothing
>> proposition... if anyone knows of a way to auto-detect
>> specific devices and manually set others in the same config
>> file... please speak up now.
>>
>> Well, you might want to try this (once again, a guess):
>>
>> a) re-enable the auto-detect - we know this will detect
>> tarjeta 0 and 3, and not tarjeta 1 and 2
>> b) add only the manual configuration for tarjeta 2, after
>> that
>>
>>
>> So your default.pa file would contain:
>>
>> ### Automatically load driver modules depending on the
>> hardware available
>> .ifexists module-hal-detect.so
>> load-module module-hal-detect
>> .else
>> ### Alternatively use the static hardware detection module
>> (for systems that
>> ### lack HAL support)
>> load-module module-detect
>> .endif
>>
>> # Load the devices:
>> #load-module module-alsa-sink sink_name=nvidia_out device=hw:0
>> #load-module module-alsa-source source_name=nvidia_in device=hw:0
>>
>> #load-module module-alsa-sink sink_name=hdmi_out device=hw:1
>> #load-module module-alsa-source source_name=hdmi_in device=hw:1
>>
>> load-module module-alsa-sink sink_name=ewx2496_out
>> device=hw:2 channels=10
>> channel_map=left,right,aux0,aux1,aux2,aux3,aux4,aux5,aux6,aux7
>> load-module module-alsa-source source_name=ewx2496_in
>> device=hw:2 channels=12
>> channel_map=left,right,aux0,aux1,aux2,aux3,aux4,aux5,aux6,aux7,aux8,aux9
>>
>> #load-module module-alsa-sink sink_name=e192m_out device=hw:3
>> #load-module module-alsa-source source_name=e192m_in device=hw:3
>>
>> # Select default device
>> #set-default-sink nvidia_out
>> #set-default-source nvidia_in
>>
>> Let's see if module-hal-detect/module-detect allows manual
>> loading of sources/sinks.
>>
>>
>> R
>>
>> Juan A Fuentes Bermudez wrote:
>>> hi, the problem is partial solved
>>>
>>> i an coment and paste the module taht you say my
>>>
>>> the pa server not start after reboot,
>>>
>>> i am coment and uncoment one to one, to discart waht is the
>>> card tthat cause problem ,
>>>
>>> # Load the devices:
>>> load-module module-alsa-sink sink_name=nvidia_out device=hw:0
>>> load-module module-alsa-source source_name=nvidia_in device=hw:0
>>>
>>> #load-module module-alsa-sink sink_name=hdmi_out device=hw:1
>>> #load-module module-alsa-source source_name=hdmi_in device=hw:1
>>>
>>> load-module module-alsa-sink sink_name=ewx2496_out
>>> device=hw:2 channels=10
>>> channel_map=left,right,aux0,aux1,aux2,aux3,aux4,aux5,aux6,aux7
>>> load-module module-alsa-source source_name=ewx2496_in
>>> device=hw:2 channels=12
>>> channel_map=left,right,aux0,aux1,aux2,aux3,aux4,aux5,aux6,aux7,aux8,aux9
>>>
>>> #load-module module-alsa-sink sink_name=e192m_out device=hw:3
>>> #load-module module-alsa-source source_name=e192m_in device=hw:3
>>> in this mode, load pa server, and in the padevchooser apear
>>> the ewx2496 card :) very happy
>>>
>>> when un coment the e192 card, again pa server not start same
>>> when uncoment hdmi card
>>>
>>> i like active also e192 card, is posible?
>>>
>>>
>>> i am to paste this info, this is the first mail i want to
>>> send to list :
>>>
>>> hi, the server not start, always i am login as root
>>>
>>> can you test the information?
>>>
>>>
>>> # grep pulse /var/log/messages
>>> Jun 2 14:39:39 64-1 pulseaudio[6430]: main.c: This program
>>> is not intended to be run as root (unless --system is
>>> specified).
>>> Jun 2 14:39:39 64-1 pulseaudio[6430]: alsa-util.c: Device
>>> front:3 doesn't support sample format s16le, changed to s32le.
>>> Jun 2 14:39:39 64-1 pulseaudio[6430]: alsa-util.c: Device
>>> front:3 doesn't support sample format s16le, changed to s32le.
>>> Jun 2 14:39:39 64-1 pulseaudio[6430]: alsa-util.c: Cannot
>>> find fallback mixer control "Mic".
>>> Jun 2 14:39:39 64-1 pulseaudio[6430]: alsa-util.c: Device
>>> hw:2 doesn't support 2 channels, changed to 10.
>>> Jun 2 14:39:39 64-1 pulseaudio[6430]: alsa-util.c: Device
>>> hw:2 doesn't support sample format s16le, changed to s32le.
>>> Jun 2 14:39:39 64-1 pulseaudio[6430]: alsa-util.c: Cannot
>>> find fallback mixer control "PCM".
>>> Jun 2 14:39:39 64-1 pulseaudio[6430]: alsa-util.c: Device
>>> hw:2 doesn't support 2 channels, changed to 12.
>>> Jun 2 14:39:39 64-1 pulseaudio[6430]: alsa-util.c: Device
>>> hw:2 doesn't support sample format s16le, changed to s32le.
>>> Jun 2 14:39:39 64-1 pulseaudio[6430]: alsa-util.c: Cannot
>>> find fallback mixer control "Mic".
>>> Jun 2 17:33:48 64-1 pulseaudio[6428]: main.c: This program
>>> is not intended to be run as root (unless --system is
>>> specified).
>>> Jun 2 17:33:48 64-1 pulseaudio[6428]: alsa-util.c: Device
>>> front:3 doesn't support sample format s16le, changed to s32le.
>>> Jun 2 17:33:48 64-1 pulseaudio[6428]: alsa-util.c: Device
>>> front:3 doesn't support sample format s16le, changed to s32le.
>>> Jun 2 17:33:48 64-1 pulseaudio[6428]: alsa-util.c: Cannot
>>> find fallback mixer control "Mic".
>>> Jun 2 17:33:48 64-1 pulseaudio[6428]: alsa-util.c: Device
>>> hw:0 doesn't support 2 channels, changed to 10.
>>> Jun 2 17:33:48 64-1 pulseaudio[6428]: alsa-util.c: Device
>>> hw:0 doesn't support sample format s16le, changed to s32le.
>>> Jun 2 17:33:48 64-1 pulseaudio[6428]: alsa-util.c: Cannot
>>> find fallback mixer control "PCM".
>>> Jun 2 17:33:48 64-1 pulseaudio[6428]: alsa-util.c: Device
>>> hw:0 doesn't support 2 channels, changed to 12.
>>> Jun 2 17:33:48 64-1 pulseaudio[6428]: alsa-util.c: Device
>>> hw:0 doesn't support sample format s16le, changed to s32le.
>>> Jun 2 17:33:48 64-1 pulseaudio[6428]: alsa-util.c: Cannot
>>> find fallback mixer control "Mic".
>>> Jun 2 17:53:14 64-1 pulseaudio[6428]: module-x11-publish.c:
>>> PulseAudio information vanished from X11!
>>> Jun 3 00:37:48 64-1 pulseaudio[6479]: main.c: This program
>>> is not intended to be run as root (unless --system is
>>> specified).
>>> Jun 3 00:37:48 64-1 pulseaudio[6479]: alsa-util.c: Device
>>> front:3 doesn't support sample format s16le, changed to s32le.
>>> Jun 3 00:37:48 64-1 pulseaudio[6479]: alsa-util.c: Device
>>> front:3 doesn't support sample format s16le, changed to s32le.
>>> Jun 3 00:37:48 64-1 pulseaudio[6479]: alsa-util.c: Cannot
>>> find fallback mixer control "Mic".
>>> Jun 3 00:37:48 64-1 pulseaudio[6479]: alsa-util.c: Device
>>> hw:2 doesn't support 2 channels, changed to 10.
>>> Jun 3 00:37:48 64-1 pulseaudio[6479]: alsa-util.c: Device
>>> hw:2 doesn't support sample format s16le, changed to s32le.
>>> Jun 3 00:37:48 64-1 pulseaudio[6479]: alsa-util.c: Cannot
>>> find fallback mixer control "PCM".
>>> Jun 3 00:37:48 64-1 pulseaudio[6479]: alsa-util.c: Device
>>> hw:2 doesn't support 2 channels, changed to 12.
>>> Jun 3 00:37:48 64-1 pulseaudio[6479]: alsa-util.c: Device
>>> hw:2 doesn't support sample format s16le, changed to s32le.
>>> Jun 3 00:37:48 64-1 pulseaudio[6479]: alsa-util.c: Cannot
>>> find fallback mixer control "Mic".
>>> Jun 3 20:12:01 64-1 pulseaudio[6418]: main.c: This program
>>> is not intended to be run as root (unless --system is
>>> specified).
>>> Jun 3 20:12:02 64-1 pulseaudio[6418]: alsa-util.c: Device
>>> front:3 doesn't support sample format s16le, changed to s32le.
>>> Jun 3 20:12:02 64-1 pulseaudio[6418]: alsa-util.c: Device
>>> front:3 doesn't support sample format s16le, changed to s32le.
>>> Jun 3 20:12:02 64-1 pulseaudio[6418]: alsa-util.c: Cannot
>>> find fallback mixer control "Mic".
>>> Jun 3 20:12:02 64-1 pulseaudio[6418]: alsa-util.c: Device
>>> hw:2 doesn't support 2 channels, changed to 10.
>>> Jun 3 20:12:02 64-1 pulseaudio[6418]: alsa-util.c: Device
>>> hw:2 doesn't support sample format s16le, changed to s32le.
>>> Jun 3 20:12:02 64-1 pulseaudio[6418]: alsa-util.c: Cannot
>>> find fallback mixer control "PCM".
>>> Jun 3 20:12:02 64-1 pulseaudio[6418]: alsa-util.c: Device
>>> hw:2 doesn't support 2 channels, changed to 12.
>>> Jun 3 20:12:02 64-1 pulseaudio[6418]: alsa-util.c: Device
>>> hw:2 doesn't support sample format s16le, changed to s32le.
>>> Jun 3 20:12:02 64-1 pulseaudio[6418]: alsa-util.c: Cannot
>>> find fallback mixer control "Mic".
>>> Jun 3 20:25:33 64-1 pulseaudio[6445]: main.c: This program
>>> is not intended to be run as root (unless --sy
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>> this is my curent default.pa
>>>
>>>
>>>
>>> #!/usr/bin/pulseaudio -nF
>>> #
>>> # This file is part of PulseAudio.
>>> #
>>> # PulseAudio is free software; you can redistribute it
>>> and/or modify it
>>> # under the terms of the GNU Lesser General Public License
>>> as published by
>>> # the Free Software Foundation; either version 2 of the
>>> License, or
>>> # (at your option) any later version.
>>> #
>>> # PulseAudio is distributed in the hope that it will be
>>> useful, but
>>> # WITHOUT ANY WARRANTY; without even the implied warranty of
>>> # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
>>> the GNU
>>> # General Public License for more details.
>>> #
>>> # You should have received a copy of the GNU Lesser General
>>> Public License
>>> # along with PulseAudio; if not, write to the Free Software
>>> Foundation,
>>> # Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
>>>
>>> .nofail
>>>
>>> ### Load something into the sample cache
>>> #load-sample-lazy x11-bell
>>> /usr/share/sounds/gtk-events/activate.wav
>>> load-sample-lazy pulse-hotplug /usr/share/sounds/startup3.wav
>>> #load-sample-lazy pulse-coldplug /usr/share/sounds/startup3.wav
>>> #load-sample-lazy pulse-access /usr/share/sounds/generic.wav
>>>
>>> .fail
>>>
>>> ### Load audio drivers statically (it's probably better to
>>> not load
>>> ### these drivers manually, but instead use module-hal-detect --
>>> ### see below -- for doing this automatically)
>>> #load-module module-alsa-sink
>>> #load-module module-alsa-source device=hw:1,0
>>> #load-module module-oss device="/dev/dsp" sink_name=output
>>> source_name=input
>>> #load-module module-oss-mmap device="/dev/dsp"
>>> sink_name=output source_name=input
>>> #load-module module-null-sink
>>> #load-module module-pipe-sink
>>>
>>> ### Automatically load driver modules depending on the
>>> hardware available
>>> #.ifexists module-hal-detect.so
>>> #load-module module-hal-detect
>>> #.else
>>> ### Alternatively use the static hardware detection module
>>> (for systems that
>>> ### lack HAL support)
>>> #load-module module-detect
>>> #.endif
>>>
>>> # Load the devices:
>>> load-module module-alsa-sink sink_name=nvidia_out device=hw:0
>>> load-module module-alsa-source source_name=nvidia_in device=hw:0
>>>
>>> load-module module-alsa-sink sink_name=hdmi_out device=hw:1
>>> load-module module-alsa-source source_name=hdmi_in device=hw:1
>>>
>>> load-module module-alsa-sink sink_name=ewx2496_out
>>> device=hw:2 channels=10
>>> channel_map=left,right,aux0,aux1,aux2,aux3,aux4,aux5,aux6,aux7
>>> load-module module-alsa-source source_name=ewx2496_in
>>> device=hw:2 channels=12
>>> channel_map=left,right,aux0,aux1,aux2,aux3,aux4,aux5,aux6,aux7,aux8,aux9
>>>
>>> load-module module-alsa-sink sink_name=e192m_out device=hw:3
>>> load-module module-alsa-source source_name=e192m_in device=hw:3
>>>
>>> # Select default device
>>> set-default-sink nvidia_out
>>> set-default-source nvidia_in
>>>
>>>
>>>
>>> ## Load several protocols
>>> .ifexists module-esound-protocol-unix.so
>>> load-module module-esound-protocol-unix
>>> .endif
>>> load-module module-native-protocol-unix
>>>
>>> ### Network access (may be configured with paprefs, so leave
>>> this commented
>>> ### here if you plan to use paprefs)
>>> #load-module module-esound-protocol-tcp
>>> #load-module module-native-protocol-tcp
>>> #load-module module-zeroconf-publish
>>>
>>> ### Load the RTP reciever module (also configured via
>>> paprefs, see above)
>>> #load-module module-rtp-recv
>>>
>>> ### Load the RTP sender module (also configured via paprefs,
>>> see above)
>>> #load-module module-null-sink sink_name=rtp format=s16be
>>> channels=2 rate=44100 description="RTP Multicast Sink"
>>> #load-module module-rtp-send source=rtp.monitor
>>>
>>> ### Automatically restore the volume of playback streams
>>> load-module module-volume-restore
>>>
>>> ### Automatically restore the default sink/source when
>>> changed by the user during runtime
>>> load-module module-default-device-restore
>>>
>>> ### Automatically move streams to the default sink if the
>>> sink they are
>>> ### connected to dies, similar for sources
>>> load-module module-rescue-streams
>>>
>>> ### Automatically suspend sinks/sources that become idle for
>>> too long
>>> load-module module-suspend-on-idle
>>>
>>> ### Load X11 bell module
>>> #load-module module-x11-bell sample=x11-bell
>>>
>>> ### Register ourselves in the X11 session manager
>>> # Deactivated by default, to avoid deadlock when PA is
>>> started as esd from gnome-session
>>> # Instead we load this via /etc/xdg/autostart/ and "pactl
>>> load-module" now
>>> # load-module module-x11-xsmp
>>>
>>> ### Load additional modules from GConf settings. This can be
>>> configured with the paprefs tool.
>>> ### Please keep in mind that the modules configured by
>>> paprefs might conflict with manually
>>> ### loaded modules.
>>> .ifexists module-gconf.so
>>> .nofail
>>> load-module module-gconf
>>> .fail
>>> .endif
>>>
>>> ### Publish connection data in the X11 root window
>>> .ifexists module-x11-publish.so
>>> .nofail
>>> load-module module-x11-publish
>>> .fail
>>> .endif
>>>
>>> ### Make some devices default
>>> #set-default-sink output
>>> #set-default-source input
>>> ------------------------------------------------------------------------
>>>
>>> _______________________________________________
>>> pulseaudio-discuss mailing list
>>> pulseaudio-discuss at mail.0pointer.de
>>> https://tango.0pointer.de/mailman/listinfo/pulseaudio-discuss
>>>
>> ------------------------------------------------------------------------
>> _______________________________________________
>> pulseaudio-discuss mailing list
>> pulseaudio-discuss at mail.0pointer.de
>> https://tango.0pointer.de/mailman/listinfo/pulseaudio-discuss
>>
>> ------------------------------------------------------------------------
>>
>> _______________________________________________
>> pulseaudio-discuss mailing list
>> pulseaudio-discuss at mail.0pointer.de
>> https://tango.0pointer.de/mailman/listinfo/pulseaudio-discuss
>>
>
> ------------------------------------------------------------------------
> _______________________________________________
> pulseaudio-discuss mailing list
> pulseaudio-discuss at mail.0pointer.de
> https://tango.0pointer.de/mailman/listinfo/pulseaudio-discuss
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> pulseaudio-discuss mailing list
> pulseaudio-discuss at mail.0pointer.de
> https://tango.0pointer.de/mailman/listinfo/pulseaudio-discuss
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freedesktop.org/archives/pulseaudio-discuss/attachments/20080604/cbe5043b/attachment.htm>
More information about the pulseaudio-discuss
mailing list