[pulseaudio-discuss] [PATCH] fix a number of warnings
Daniel Mack
daniel at caiaq.de
Wed Dec 9 23:43:58 PST 2009
most of them were due to missing #ifdefs or wrong printf format type for
[s]size_t.
---
src/daemon/daemon-conf.c | 4 ++++
src/pulsecore/core-util.c | 4 ++--
src/pulsecore/envelope.c | 8 +++-----
src/pulsecore/sink-input.c | 12 +++++++-----
4 files changed, 16 insertions(+), 12 deletions(-)
diff --git a/src/daemon/daemon-conf.c b/src/daemon/daemon-conf.c
index bfd5c11..79dd49a 100644
--- a/src/daemon/daemon-conf.c
+++ b/src/daemon/daemon-conf.c
@@ -466,6 +466,7 @@ static int parse_rtprio(const char *filename, unsigned line, const char *section
return 0;
}
+#ifdef HAVE_DBUS
static int parse_server_type(const char *filename, unsigned line, const char *section, const char *lvalue, const char *rvalue, void *data, void *userdata) {
pa_daemon_conf *c = data;
@@ -481,6 +482,7 @@ static int parse_server_type(const char *filename, unsigned line, const char *se
return 0;
}
+#endif
int pa_daemon_conf_load(pa_daemon_conf *c, const char *filename) {
int r = -1;
@@ -666,12 +668,14 @@ char *pa_daemon_conf_dump(pa_daemon_conf *c) {
[PA_LOG_ERROR] = "error"
};
+#ifdef HAVE_DBUS
static const char* const server_type_to_string[] = {
[PA_SERVER_TYPE_UNSET] = "!!UNSET!!",
[PA_SERVER_TYPE_USER] = "user",
[PA_SERVER_TYPE_SYSTEM] = "system",
[PA_SERVER_TYPE_NONE] = "none"
};
+#endif
pa_strbuf *s;
char cm[PA_CHANNEL_MAP_SNPRINT_MAX];
diff --git a/src/pulsecore/core-util.c b/src/pulsecore/core-util.c
index d596c48..b64c51e 100644
--- a/src/pulsecore/core-util.c
+++ b/src/pulsecore/core-util.c
@@ -580,8 +580,8 @@ char *pa_strlcpy(char *b, const char *s, size_t l) {
static int set_scheduler(int rtprio) {
struct sched_param sp;
- int r;
#ifdef HAVE_DBUS
+ int r;
DBusError error;
DBusConnection *bus;
@@ -628,7 +628,7 @@ static int set_scheduler(int rtprio) {
errno = -r;
#else
- errno = r;
+ errno = 0;
#endif
return -1;
diff --git a/src/pulsecore/envelope.c b/src/pulsecore/envelope.c
index 0eca811..75e189c 100644
--- a/src/pulsecore/envelope.c
+++ b/src/pulsecore/envelope.c
@@ -597,7 +597,7 @@ void pa_envelope_apply(pa_envelope *e, pa_memchunk *chunk) {
fs = pa_frame_size(&e->sample_spec);
n = chunk->length;
- pa_log_debug("Envelop position %d applying factor %d=%f, sample spec is %d, chunk's length is %d, fs is %d\n", e->x, linear_get_int(e, v), ((float) linear_get_int(e,v))/0x10000, e->sample_spec.format, n, fs);
+ pa_log_debug("Envelop position %zu applying factor %d=%f, sample spec is %d, chunk's length is %zu, fs is %zu\n", e->x, linear_get_int(e, v), ((float) linear_get_int(e,v))/0x10000, e->sample_spec.format, n, fs);
switch (e->sample_spec.format) {
@@ -965,11 +965,10 @@ void pa_envelope_restart(pa_envelope* e) {
}
pa_bool_t pa_envelope_is_finished(pa_envelope* e) {
- pa_assert(e);
-
int v;
pa_bool_t finished;
+ pa_assert(e);
envelope_begin_read(e, &v);
finished = (e->x >= e->points[v].x[e->points[v].n_points-1]);
envelope_commit_read(e, v);
@@ -978,11 +977,10 @@ pa_bool_t pa_envelope_is_finished(pa_envelope* e) {
}
int32_t pa_envelope_length(pa_envelope *e) {
- pa_assert(e);
-
int v;
size_t size;
+ pa_assert(e);
envelope_begin_read(e, &v);
size = e->points[v].x[e->points[v].n_points-1] - e->points[v].x[0];
envelope_commit_read(e, v);
diff --git a/src/pulsecore/sink-input.c b/src/pulsecore/sink-input.c
index 35e3d4a..9b4edeb 100644
--- a/src/pulsecore/sink-input.c
+++ b/src/pulsecore/sink-input.c
@@ -779,11 +779,11 @@ void pa_sink_input_peek(pa_sink_input *i, size_t slength /* in sink frames */, p
if (!i->thread_info.ramp_info.envelope_dead) {
i->thread_info.ramp_info.envelope_dying += chunk->length;
- pa_log_debug("Envelope dying is %d, chunk length is %d, dead thresholder is %d\n", i->thread_info.ramp_info.envelope_dying,
+ pa_log_debug("Envelope dying is %d, chunk length is %zu, dead thresholder is %lu\n", i->thread_info.ramp_info.envelope_dying,
chunk->length,
i->sink->thread_info.max_rewind + pa_envelope_length(i->thread_info.ramp_info.envelope));
- if (i->thread_info.ramp_info.envelope_dying >= (i->sink->thread_info.max_rewind + pa_envelope_length(i->thread_info.ramp_info.envelope))) {
+ if (i->thread_info.ramp_info.envelope_dying >= (int32_t) (i->sink->thread_info.max_rewind + pa_envelope_length(i->thread_info.ramp_info.envelope))) {
pa_log_debug("RELEASE Envelop");
i->thread_info.ramp_info.envelope_dead = TRUE;
sink_input_release_envelope(i);
@@ -1767,12 +1767,14 @@ static void sink_input_rewind_ramp_info(pa_sink_input *i, size_t nbytes) {
pa_assert(i);
if (!i->thread_info.ramp_info.envelope_dead) {
- pa_assert(i->thread_info.ramp_info.envelope);
+ int32_t envelope_length;
- int32_t envelope_length = pa_envelope_length(i->thread_info.ramp_info.envelope);
+ pa_assert(i->thread_info.ramp_info.envelope);
+
+ envelope_length = pa_envelope_length(i->thread_info.ramp_info.envelope);
if (i->thread_info.ramp_info.envelope_dying > envelope_length) {
- if ((i->thread_info.ramp_info.envelope_dying - nbytes) < envelope_length) {
+ if ((int32_t) (i->thread_info.ramp_info.envelope_dying - nbytes) < envelope_length) {
pa_log_debug("Envelope Become Alive");
pa_envelope_rewind(i->thread_info.ramp_info.envelope, envelope_length - (i->thread_info.ramp_info.envelope_dying - nbytes));
i->thread_info.ramp_info.is_ramping = TRUE;
--
1.6.3.3
More information about the pulseaudio-discuss
mailing list