[pulseaudio-discuss] ANNOUNCE: PulseAudio 1.0 test release 3
Maarten Bosmans
mkbosmans at gmail.com
Mon Aug 29 10:53:32 PDT 2011
2011/8/29 Colin Guthrie <gmane at colin.guthr.ie>:
> Hiya,
>
> Another test tarball.
And another zip with win32 binaries:
http://bosmans.ch/pulseaudio/pulseaudio-0.99.3-1.1.zip
Maarten
> Several bug fixes since last time.
>
> Notable changes:
> 1. Device Volume Restore database split:
> This is to allow per-port volume saves. It *should* migrate
> nicely from 0.9.23 (and some versions before) but it *will not*
> migrate nicely from previous version of git master and previous
> pre-releases.
> 2. API/ABI breakage in device-restore API extension from last RC.
> The only user of this is pavucontrol git master, so make sure
> you update it too after this change.
>
>
>
>
> http://freedesktop.org/software/pulseaudio/releases/pulseaudio-0.99.3.tar.gz
> MD5: 95787b514872d838b49ec4d7debdd6aa
> SHA1: e07644e1d55719cd261750c94774ecf9e55f337f
>
> PulseAudio 0.99.3 (1.0 RC3)
>
> Changes since v0.99.2:
> Arun Raghavan (23):
> source: Remove the PA_SOURCE_PASSTHROUGH flag
> alsa: Don't always suspend/unsuspend on sink-input removal
> formats: Use correct API to check for passthrough streams
> alsa: Open iec958 device with NONAUDIO bit set in passthrough mode
> formats: Fix bad passsthrough check
> alsa: Fix bad function name
> daemon: Fix compiler warning about missing function prototype
> passthrough: We must not plug in a resampler on stream move
> sink-input: Ensure no volumes are applied for passthrough streams
> source-output: Ensure no volumes are applied for passthrough streams
> Revert "device-restore: Make bools not be bit fields"
> sample-util: Fix off-by-one in error check
> sink: Add PA_SINK_SET_FORMATS macro
> build-sys: Fix some LDFLAGS vs. LDADD usage
> echo-cancel: Add multiple include protection for header
> echo-cancel: Use pa_streq instead of strcmp
> echo-cancel: Move speex preprocessing out of the main module
> passthrough: Fix what volume we set sinks/sources to
> passthrough: Fix setting volume to unamplified again
> echo-cancel: Make save_aec modarg a bool instead of an int
> echo-cancel: Don't allow streams to attach while unloading
> echo-cancel: Get rid of annoying compiler warnings
> equalizer: Comment out unused function
>
> Colin Guthrie (6):
> def: Add a new enum to allow differntiation between sinks and sources.
> dbus: Use pa_device_type_t rather than an internal equivalent
> device-restore: Change the API to include type information (sink
> vs. source)
> device-restore: Split device restore database into two parts.
> device-restore: Restore volumes on port change.
> build-sys: bump soname
>
> David Henningsson (7):
> alsa-mixer: Mute IEC958 optical raw for several Audigy models
> alsa-mixer: Add "Line HP Swap" element
> JACK: Load module-jackdbus-detect in default.pa
> Remove offensive part of error message
> switch-on-connect: Don't switch to a monitor source
> Fix spelling sucess -> success
> Set better priorities on input paths
>
> Jonny Lamb (1):
> introspect: fix typo in default sink/source docs
>
> Lu Guanqun (1):
> pacat: make pacat respond to cork/uncork events
>
> Maarten Bosmans (6):
> Spelling fixes in public headers
> More spelling fixes
> gitignore: Add Orc autogenerated files
> echo-cancel: Use stream index in debug message
> Remove extra ; s where they are not allowed in strict C99
> sndfile-util: Check return value of sf_command for errors
>
> ---
> configure.ac | 2
> src/.gitignore | 1
> src/Makefile.am | 8
> src/daemon/cmdline.c | 2
> src/daemon/cmdline.h | 2
> src/daemon/default.pa.in | 5
> src/daemon/ltdl-bind-now.c | 2
> src/daemon/main.c | 3
> src/map-file | 6
> src/modules/alsa/alsa-mixer.c | 4
> src/modules/alsa/alsa-mixer.h | 2
> src/modules/alsa/alsa-sink.c | 26
> src/modules/alsa/alsa-source.c | 2
> src/modules/alsa/mixer/paths/analog-input-aux.conf | 2
> src/modules/alsa/mixer/paths/analog-input-dock-mic.conf | 2
> src/modules/alsa/mixer/paths/analog-input-front-mic.conf | 2
> src/modules/alsa/mixer/paths/analog-input-linein.conf | 2
> src/modules/alsa/mixer/paths/analog-input-mic-line.conf | 2
> src/modules/alsa/mixer/paths/analog-input-mic.conf | 2
> src/modules/alsa/mixer/paths/analog-input-rear-mic.conf | 2
> src/modules/alsa/mixer/paths/analog-output-headphones.conf | 3
> src/modules/alsa/mixer/paths/analog-output.conf | 3
> src/modules/alsa/mixer/paths/analog-output.conf.common | 3
> src/modules/dbus/iface-core.c | 2
> src/modules/dbus/iface-device.c | 117 +-
> src/modules/dbus/iface-stream.c | 2
> src/modules/echo-cancel/adrian-aec.h | 10
> src/modules/echo-cancel/echo-cancel.h | 13
> src/modules/echo-cancel/module-echo-cancel.c | 147 --
> src/modules/echo-cancel/speex.c | 119 ++
> src/modules/jack/module-jack-sink.c | 2
> src/modules/module-combine-sink.c | 4
> src/modules/module-default-device-restore.c | 4
> src/modules/module-device-manager.c | 8
> src/modules/module-device-restore.c | 674
> +++++++++----
> src/modules/module-equalizer-sink.c | 24
> src/modules/module-filter-apply.c | 2
> src/modules/module-hal-detect.c | 2
> src/modules/module-ladspa-sink.c | 2
> src/modules/module-position-event-sounds.c | 2
> src/modules/module-protocol-stub.c | 4
> src/modules/module-switch-on-connect.c | 9
> src/modules/module-tunnel.c | 2
> src/modules/module-udev-detect.c | 6
> src/modules/oss/module-oss.c | 2
> src/modules/raop/module-raop-sink.c | 4
> src/modules/raop/raop_client.c | 6
> src/modules/reserve-monitor.h | 2
> src/modules/reserve.h | 2
> src/modules/udev-util.c | 2
> src/pulse/context.h | 10
> src/pulse/def.h | 22
> src/pulse/ext-device-restore.c | 46
> src/pulse/ext-device-restore.h | 14
> src/pulse/gccmacro.h | 4
> src/pulse/introspect.c | 4
> src/pulse/introspect.h | 2
> src/pulse/mainloop-api.h | 10
> src/pulse/proplist.h | 12
> src/pulse/pulseaudio.h | 2
> src/pulse/sample.h | 10
> src/pulse/simple.h | 2
> src/pulse/stream.c | 8
> src/pulse/stream.h | 24
> src/pulse/timeval.c | 2
> src/pulse/timeval.h | 2
> src/pulse/volume.h | 4
> src/pulsecore/atomic.h | 4
> src/pulsecore/aupdate.h | 4
> src/pulsecore/authkey.c | 2
> src/pulsecore/cli-command.c | 4
> src/pulsecore/core-subscribe.c | 4
> src/pulsecore/core-util.c | 23
> src/pulsecore/core-util.h | 2
> src/pulsecore/core.h | 2
> src/pulsecore/database-gdbm.c | 2
> src/pulsecore/database-simple.c | 2
> src/pulsecore/database.h | 2
> src/pulsecore/dbus-util.c | 2
> src/pulsecore/esound.h | 6
> src/pulsecore/flist.h | 2
> src/pulsecore/iochannel.h | 6
> src/pulsecore/ioline.h | 4
> src/pulsecore/log.h | 2
> src/pulsecore/mcalign.c | 2
> src/pulsecore/mcalign.h | 2
> src/pulsecore/memblock.c | 2
> src/pulsecore/memblock.h | 2
> src/pulsecore/memblockq.c | 2
> src/pulsecore/memblockq.h | 2
> src/pulsecore/memchunk.h | 2
> src/pulsecore/modargs.h | 2
> src/pulsecore/mutex.h | 2
> src/pulsecore/pid.c | 2
> src/pulsecore/prioq.h | 6
> src/pulsecore/protocol-dbus.c | 2
> src/pulsecore/protocol-esound.c | 4
> src/pulsecore/protocol-native.c | 10
> src/pulsecore/protocol-simple.c | 2
> src/pulsecore/resampler.c | 8
> src/pulsecore/rtpoll.h | 7
> src/pulsecore/sample-util.c | 6
> src/pulsecore/shm.c | 2
> src/pulsecore/sink-input.c | 44
> src/pulsecore/sink-input.h | 8
> src/pulsecore/sink.c | 43
> src/pulsecore/sink.h | 7
> src/pulsecore/sndfile-util.c | 24
> src/pulsecore/source-output.c | 30
> src/pulsecore/source-output.h | 10
> src/pulsecore/source.c | 35
> src/pulsecore/source.h | 9
> src/pulsecore/strlist.h | 2
> src/pulsecore/svolume_c.c | 2
> src/pulsecore/svolume_mmx.c | 2
> src/pulsecore/time-smoother.c | 8
> src/pulsecore/vector.h | 2
> src/pulsecore/x11wrap.h | 2
> src/tests/format-test.c | 4
> src/tests/memblock-test.c | 4
> src/tests/voltest.c | 2
> src/utils/pacat.c | 22
> src/utils/pactl.c | 2
> src/utils/padsp.c | 2
> 124 files changed, 1183 insertions(+), 660 deletions(-)
> ---
> --
>
> Colin Guthrie
> gmane(at)colin.guthr.ie
> http://colin.guthr.ie/
>
> Day Job:
> Tribalogic Limited [http://www.tribalogic.net/]
> Open Source:
> Mageia Contributor [http://www.mageia.org/]
> PulseAudio Hacker [http://www.pulseaudio.org/]
> Trac Hacker [http://trac.edgewall.org/]
>
> _______________________________________________
> pulseaudio-discuss mailing list
> pulseaudio-discuss at lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/pulseaudio-discuss
>
More information about the pulseaudio-discuss
mailing list