[pulseaudio-discuss] udev detect not working

[John Frankish]

> From: pulseaudio-discuss-bounces+j-
> frankish=slb.com at lists.freedesktop.org [mailto:pulseaudio-discuss-
> bounces+j-frankish=slb.com at lists.freedesktop.org] On Behalf Of Colin
> Guthrie
> Sent: Friday, 30 September, 2011 16:35
> To: pulseaudio-discuss at lists.freedesktop.org
> Subject: Re: [pulseaudio-discuss] udev detect not working
> 
> 'Twas brillig, and John Frankish at 30/09/11 12:47 did gyre and gimble:
> > Re-starting this thread with a modified title..
> >
> > The results are the same with several versions of pulseaudio,
> > including pulseaudio-1.0
> >
> > pulseaudio -vvvv
> > .....
> > D: [pulseaudio] cli-command.c: Checking for existence of
> > '/usr/local/lib/pulse-0.99/modules/module-udev-detect.so': success
> > I: [pulseaudio] module-udev-detect.c: Found 0 cards.
> > I: [pulseaudio] module.c: Loaded "module-udev-detect" (index: #4;
> argument: "").
> >
> > This occurs on both a dell d430 and a macmini server.
> >
> > Using tinycorelinux with linux-2.6.33.3 glibc-2.11.1 and udev-151 the udev
> detection works.
> > Using tinycorelinux with linux-3.0.3 with eglibc-2.13 and udev-151 the
> > udev detection does not work
> >
> > I'm using the same config files and udev rules in both cases
> >
> > Is there any pulseaudio udev module or udevadm troubleshooting I can
> try?
> 
> There may be some udevadm tricks (I'm not an expert), but other than that
> you could just scatter some more debug statements throughout udev-detect
> code and try and suss it out.
> 
Thanks for the suggestion, but scattering debug statements in the udev-detect code it a little beyond me
(unless somebody suggests what to put where).

Does anybody else have any ideas?