[pulseaudio-discuss] Audio output on Bluetooth headset is choppy - PulseAudio at fault?
Alexander Skwar
alexanders.mailinglists+nospam at gmail.com
Fri Sep 9 03:18:46 PDT 2011
Hello!
123456789 123456789 123456789 123456789 123456789 123456789 123456789
I managed to get my Bluetooth headset going (for the setup, please see
http://wp.m/pA8p6-66), more or less in openSUSE 11.4 & KDE. However,
it doesn't work well…
At first, after I established the BT connection, output is quite well.
Then I repeatedly use Amarok (and also other apps?) to play MP3s; ie. I
(fully) stop & start Amarok. Then, after some time, sound output starts
to "stutter". Ie. it plays for a fraction of a second, then it pauses
and plays again. It's not only Amarok which is then showing this bad
behaviour, but everything, ie. also the Phonon sound settings dialog in
the control center and also "simple" commands like this:
env PULSE_SINK=bluez_sink.00_1A_7D_60_67_1F \
padsp \
sox /usr/share/sounds/linphone/rings/oldphone.wav -t ossdsp /dev/dsp
Or even this!
paplay -d bluez_sink.00_1A_7D_60_67_1F \
/usr/share/sounds/linphone/rings/oldphone.wav
So it's (maybe?) not really Amaroks fault which causes these problems.
It's also not related to oldphone.wav - I've double checked this *G*
When I re-connect the Bluetooth device, it works. At least most of the
times. Right now, when I build the connection, right afterwards the
sound was right away distorted :(
Well… What to do?
On Identi.ca, I had a brief chat with @afiestas, the guy behind the KDE
bluedevil bluetooth stack, see [1] & [2] on Identi.ca. He made it quite
clear, that these sound problems aren't (strictly) related to Bluetooth
and/or Bluedevil, but instead to PulseAudio. I assume he knows
Bluetooth rather well.
Going to attach the output of "pacmd ls", while paply ... .wav was
running/stuttering. Also amixer and getfacl /dev/snd output attached.
And also "grep pulseaudio /var/log/messages". In the "excerpt-from..."
file, there are a *LOT* of messages like this:
[…]
Sep 9 11:37:40 ewzw032 pulseaudio[2984]: module-bluetooth-device.c:
Skipping 752010 us (= 132652 bytes) in audio stream
Sep 9 11:37:40 ewzw032 pulseaudio[2984]: module-bluetooth-device.c:
Skipping 296850 us (= 52364 bytes) in audio stream
[…]
Why is it skipping?
ask at ewzw032:/tmp> sudo lsof /dev/snd/* /dev/dsp*
lsof: WARNING: can't stat() fuse.gvfs-fuse-daemon file system
/home/ask/.gvfs
Output information may be incomplete.
COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME
pulseaudi 2984 ask mem CHR 116,5 5304 /dev/snd/pcmC0D0c
pulseaudi 2984 ask 21u CHR 116,7 0t0 5306 /dev/snd/controlC0
pulseaudi 2984 ask 27u CHR 116,7 0t0 5306 /dev/snd/controlC0
pulseaudi 2984 ask 50u CHR 116,5 0t0 5304 /dev/snd/pcmC0D0c
ask at ewzw032:/tmp> ls -la /dev/snd/* /dev/dsp*
crw-rw----+ 1 root audio 14, 3 8. Sep 14:33 /dev/dsp
crw-rw----+ 1 root audio 116, 7 8. Sep 14:33 /dev/snd/controlC0
crw-rw----+ 1 root audio 116, 6 8. Sep 14:33 /dev/snd/hwC0D0
crw-rw----+ 1 root audio 116, 5 8. Sep 18:02 /dev/snd/pcmC0D0c
crw-rw----+ 1 root audio 116, 4 9. Sep 12:04 /dev/snd/pcmC0D0p
crw-rw----+ 1 root audio 116, 3 8. Sep 14:34 /dev/snd/pcmC0D1p
crw-rw----+ 1 root audio 116, 8 8. Sep 14:33 /dev/snd/seq
crw-rw----+ 1 root audio 116, 2 8. Sep 14:33 /dev/snd/timer
/dev/snd/by-path:
insgesamt 0
drwxr-xr-x 2 root root 60 8. Sep 14:33 .
drwxr-xr-x 3 root root 200 8. Sep 14:33 ..
lrwxrwxrwx 1 root root 12 8. Sep 14:33 pci-0000:00:1b.0 -> ../controlC0
ask at ewzw032:/tmp> id
uid=1000(ask) gid=100(users)
Gruppen=100(users),3(sys),7(lp),10(wheel),17(audio),33(video),40(games),115(vboxusers)
Alexander
[1] Conversation #1: http://identi.ca/conversation/80408761
[2] Conversation #2: http://identi.ca/conversation/80445353
--
↯ Lifestream (Twitter, Blog, …) ↣ http://sup.skwar.me/ ↯
↯ Chat (Jabber/Google Talk) ↣ a at skwar.me ; Twitter: @alexs77 ↯
-------------- next part --------------
Welcome to PulseAudio! Use "help" for usage information.
>>> Memory blocks currently allocated: 129, size: 995.6 KB.
Memory blocks allocated during the whole lifetime: 1414313, size: 3.4 GB.
Memory blocks imported from other processes: 122, size: 752.3 KB.
Memory blocks exported to other processes: 0, size: 0 B.
Total sample cache size: 0 B.
Default sample spec: s16le 2ch 44100Hz
Default channel map: front-left,front-right
Default sink name: alsa_output.pci-0000_00_1b.0.analog-stereo
Default source name: alsa_input.pci-0000_00_1b.0.analog-stereo
Memory blocks of type POOL: 7 allocated/999420 accumulated.
Memory blocks of type POOL_EXTERNAL: 0 allocated/68949 accumulated.
Memory blocks of type APPENDED: 0 allocated/71 accumulated.
Memory blocks of type USER: 0 allocated/0 accumulated.
Memory blocks of type FIXED: 0 allocated/304760 accumulated.
Memory blocks of type IMPORTED: 122 allocated/110062 accumulated.
24 module(s) loaded.
index: 0
name: <module-device-restore>
argument: <>
used: -1
load once: yes
properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore the volume/mute state of devices"
module.version = "0.9.22"
index: 1
name: <module-stream-restore>
argument: <>
used: -1
load once: yes
properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore the volume/mute/device state of streams"
module.version = "0.9.22"
index: 2
name: <module-card-restore>
argument: <>
used: -1
load once: yes
properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore profile of cards"
module.version = "0.9.22"
index: 3
name: <module-augment-properties>
argument: <>
used: -1
load once: yes
properties:
module.author = "Lennart Poettering"
module.description = "Augment the property sets of streams with additional static information"
module.version = "0.9.22"
index: 4
name: <module-alsa-card>
argument: <device_id="0" name="pci-0000_00_1b.0" card_name="alsa_card.pci-0000_00_1b.0" tsched=yes ignore_dB=no card_properties="module-udev-detect.discovered=1">
used: 2
load once: no
properties:
module.author = "Lennart Poettering"
module.description = "ALSA Card"
module.version = "0.9.22"
index: 5
name: <module-udev-detect>
argument: <>
used: -1
load once: yes
properties:
module.author = "Lennart Poettering"
module.description = "Detect available audio hardware and load matching drivers"
module.version = "0.9.22"
index: 6
name: <module-bluetooth-discover>
argument: <>
used: -1
load once: yes
properties:
module.author = "Joao Paulo Rechi Vita"
module.description = "Detect available bluetooth audio devices and load bluetooth audio drivers"
module.version = "0.9.22"
index: 7
name: <module-esound-protocol-unix>
argument: <>
used: -1
load once: no
properties:
module.author = "Lennart Poettering"
module.description = "ESOUND protocol (UNIX sockets)"
module.version = "0.9.22"
index: 8
name: <module-native-protocol-unix>
argument: <>
used: -1
load once: no
properties:
module.author = "Lennart Poettering"
module.description = "Native protocol (UNIX sockets)"
module.version = "0.9.22"
index: 9
name: <module-gconf>
argument: <>
used: -1
load once: yes
properties:
module.author = "Lennart Poettering"
module.description = "GConf Adapter"
module.version = "0.9.22"
index: 10
name: <module-default-device-restore>
argument: <>
used: -1
load once: yes
properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore the default sink and source"
module.version = "0.9.22"
index: 11
name: <module-rescue-streams>
argument: <>
used: -1
load once: yes
properties:
module.author = "Lennart Poettering"
module.description = "When a sink/source is removed, try to move their streams to the default sink/source"
module.version = "0.9.22"
index: 12
name: <module-always-sink>
argument: <>
used: -1
load once: yes
properties:
module.author = "Colin Guthrie"
module.description = "Hält stets einen Sink geladen, selbst wenn dies ein Null-Sink ist"
module.version = "0.9.22"
index: 13
name: <module-intended-roles>
argument: <>
used: -1
load once: yes
properties:
module.author = "Lennart Poettering"
module.description = "Automatically set device of streams based of intended roles of devices"
module.version = "0.9.22"
index: 14
name: <module-suspend-on-idle>
argument: <>
used: -1
load once: yes
properties:
module.author = "Lennart Poettering"
module.description = "When a sink/source is idle for too long, suspend it"
module.version = "0.9.22"
index: 15
name: <module-console-kit>
argument: <>
used: -1
load once: yes
properties:
module.author = "Lennart Poettering"
module.description = "Create a client for each ConsoleKit session of this user"
module.version = "0.9.22"
index: 16
name: <module-position-event-sounds>
argument: <>
used: -1
load once: yes
properties:
module.author = "Lennart Poettering"
module.description = "Position event sounds between L and R depending on the position on screen of the widget triggering them."
module.version = "0.9.22"
index: 17
name: <module-cork-music-on-phone>
argument: <>
used: -1
load once: yes
properties:
module.author = "Lennart Poettering"
module.description = "Mute or cork music while a phone stream exists"
module.version = "0.9.22"
index: 18
name: <module-device-manager>
argument: <do_routing=1>
used: -1
load once: yes
properties:
module.author = "Colin Guthrie"
module.description = "Keep track of devices (and their descriptions) both past and present and prioritise by role"
module.version = "0.9.22"
index: 19
name: <module-x11-publish>
argument: <display=:0>
used: -1
load once: no
properties:
module.author = "Lennart Poettering"
module.description = "X11 credential publisher"
module.version = "0.9.22"
index: 20
name: <module-x11-cork-request>
argument: <display=:0>
used: -1
load once: no
properties:
module.author = "Lennart Poettering"
module.description = "Synthesize X11 media key events when cork/uncork is requested"
module.version = "0.9.22"
index: 21
name: <module-x11-xsmp>
argument: <display=:0 session_manager=local/ewzw032:@/tmp/.ICE-unix/2544,unix/ewzw032:/tmp/.ICE-unix/2544>
used: -1
load once: no
properties:
module.author = "Lennart Poettering"
module.description = "X11 session management"
module.version = "0.9.22"
index: 30
name: <module-cli-protocol-unix>
argument: <>
used: -1
load once: no
properties:
module.author = "Lennart Poettering"
module.description = "Command line interface protocol (UNIX sockets)"
module.version = "0.9.22"
index: 32
name: <module-bluetooth-device>
argument: <address="00:1A:7D:60:67:1F" path="/org/bluez/2119/hci0/dev_00_1A_7D_60_67_1F">
used: 1
load once: no
properties:
module.author = "Joao Paulo Rechi Vita"
module.description = "Bluetooth audio sink and source"
module.version = "0.9.22"
2 sink(s) available.
* index: 0
name: <alsa_output.pci-0000_00_1b.0.analog-stereo>
driver: <module-alsa-card.c>
flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY FLAT_VOLUME DYNAMIC_LATENCY
state: SUSPENDED
suspend cause: IDLE
priority: 9959
volume: 0: 91% 1: 91%
0: -2.46 dB 1: -2.46 dB
balance 0.00
base volume: 100%
0.00 dB
volume steps: 65537
muted: no
current latency: 0.00 ms
max request: 0 KiB
max rewind: 0 KiB
monitor source: 0
sample spec: s16le 2ch 44100Hz
channel map: front-left,front-right
Stereo
used by: 0
linked by: 1
configured latency: 0.00 ms; range is 1.00 .. 1999.82 ms
card: 0 <alsa_card.pci-0000_00_1b.0>
module: 4
properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "AD198x Analog"
alsa.id = "AD198x Analog"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "0"
alsa.card_name = "HDA Intel"
alsa.long_card_name = "HDA Intel at 0xf01a0000 irq 42"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1b.0"
sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "293e"
device.product.name = "82801I (ICH9 Family) HD Audio Controller"
device.form_factor = "internal"
device.string = "front:0"
device.buffering.buffer_size = "352768"
device.buffering.fragment_size = "176384"
device.access_mode = "mmap+timer"
device.profile.name = "analog-stereo"
device.profile.description = "Analog Stereo"
device.description = "Internes Audio Analog Stereo"
alsa.mixer_name = "Analog Devices AD1884"
alsa.components = "HDA:11d41884,103c281e,00100100"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
ports:
analog-output: Analoge Ausgabe (priority 9900)
analog-output-headphones: Analoge Kopfhörer (priority 9000)
active port: <analog-output>
index: 10
name: <bluez_sink.00_1A_7D_60_67_1F>
driver: <module-bluetooth-device.c>
flags: HARDWARE DECIBEL_VOLUME LATENCY FLAT_VOLUME
state: RUNNING
suspend cause:
priority: 9030
volume: 0: 83% 1: 83%
0: -4.79 dB 1: -4.79 dB
balance 0.00
base volume: 100%
0.00 dB
volume steps: 65537
muted: no
current latency: 45.32 ms
max request: 3 KiB
max rewind: 0 KiB
monitor source: 11
sample spec: s16le 2ch 44100Hz
channel map: front-left,front-right
Stereo
used by: 1
linked by: 1
fixed latency: 45.32 ms
card: 10 <bluez_card.00_1A_7D_60_67_1F>
module: 32
properties:
bluetooth.protocol = "a2dp"
device.description = "P311"
device.string = "00:1A:7D:60:67:1F"
device.api = "bluez"
device.class = "sound"
device.bus = "bluetooth"
device.form_factor = "headset"
bluez.path = "/org/bluez/2119/hci0/dev_00_1A_7D_60_67_1F"
bluez.class = "0x240404"
bluez.name = "P311"
device.icon_name = "audio-headset-bluetooth"
device.intended_roles = "phone"
3 source(s) available.
index: 0
name: <alsa_output.pci-0000_00_1b.0.analog-stereo.monitor>
driver: <module-alsa-card.c>
flags: DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
state: SUSPENDED
suspend cause: IDLE
priority: 1950
volume: 0: 100% 1: 100%
0: 0.00 dB 1: 0.00 dB
balance 0.00
base volume: 100%
0.00 dB
volume steps: 65537
muted: no
current latency: 0.00 ms
max rewind: 0 KiB
sample spec: s16le 2ch 44100Hz
channel map: front-left,front-right
Stereo
used by: 0
linked by: 0
configured latency: 0.00 ms; range is 1.00 .. 1999.82 ms
monitor_of: 0
card: 0 <alsa_card.pci-0000_00_1b.0>
module: 4
properties:
device.description = "Monitor of Internes Audio Analog Stereo"
device.class = "monitor"
alsa.card = "0"
alsa.card_name = "HDA Intel"
alsa.long_card_name = "HDA Intel at 0xf01a0000 irq 42"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1b.0"
sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "293e"
device.product.name = "82801I (ICH9 Family) HD Audio Controller"
device.form_factor = "internal"
device.string = "0"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
* index: 1
name: <alsa_input.pci-0000_00_1b.0.analog-stereo>
driver: <module-alsa-card.c>
flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
state: RUNNING
suspend cause:
priority: 9959
volume: 0: 67% 1: 67%
0: -10.50 dB 1: -10.50 dB
balance 0.00
base volume: 42%
-22.50 dB
volume steps: 65537
muted: no
current latency: 926.44 ms
max rewind: 0 KiB
sample spec: s16le 2ch 44100Hz
channel map: front-left,front-right
Stereo
used by: 1
linked by: 1
configured latency: 1999.82 ms; range is 0.50 .. 1999.82 ms
card: 0 <alsa_card.pci-0000_00_1b.0>
module: 4
properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "AD198x Analog"
alsa.id = "AD198x Analog"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "0"
alsa.card_name = "HDA Intel"
alsa.long_card_name = "HDA Intel at 0xf01a0000 irq 42"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1b.0"
sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "293e"
device.product.name = "82801I (ICH9 Family) HD Audio Controller"
device.form_factor = "internal"
device.string = "front:0"
device.buffering.buffer_size = "352768"
device.buffering.fragment_size = "176384"
device.access_mode = "mmap+timer"
device.profile.name = "analog-stereo"
device.profile.description = "Analog Stereo"
device.description = "Internes Audio Analog Stereo"
alsa.mixer_name = "Analog Devices AD1884"
alsa.components = "HDA:11d41884,103c281e,00100100"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
ports:
input-microphone-1: Mikrofon 1 (priority 20)
input-microphone-2: Mikrofon 2 (priority 19)
active port: <input-microphone-1>
index: 11
name: <bluez_sink.00_1A_7D_60_67_1F.monitor>
driver: <module-bluetooth-device.c>
flags: DECIBEL_VOLUME LATENCY
state: IDLE
suspend cause:
priority: 1030
volume: 0: 100% 1: 100%
0: 0.00 dB 1: 0.00 dB
balance 0.00
base volume: 100%
0.00 dB
volume steps: 65537
muted: no
current latency: 0.00 ms
max rewind: 0 KiB
sample spec: s16le 2ch 44100Hz
channel map: front-left,front-right
Stereo
used by: 0
linked by: 0
fixed latency: 45.32 ms
monitor_of: 10
card: 10 <bluez_card.00_1A_7D_60_67_1F>
module: 32
properties:
device.description = "Monitor of P311"
device.class = "monitor"
device.string = "00:1A:7D:60:67:1F"
device.api = "bluez"
device.bus = "bluetooth"
device.form_factor = "headset"
bluez.path = "/org/bluez/2119/hci0/dev_00_1A_7D_60_67_1F"
bluez.class = "0x240404"
bluez.name = "P311"
device.icon_name = "audio-headset-bluetooth"
device.intended_roles = "phone"
14 client(s) logged in.
index: 0
driver: <module-console-kit.c>
owner module: 15
properties:
application.name = "ConsoleKit Session /org/freedesktop/ConsoleKit/Session1"
console-kit.session = "/org/freedesktop/ConsoleKit/Session1"
index: 2
driver: <protocol-native.c>
owner module: 8
properties:
application.name = "KMix KDE 4"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "16"
application.process.id = "2954"
application.process.user = "ask"
application.process.host = "ewzw032"
application.process.binary = "kdeinit4"
application.language = "de_CH.UTF-8"
window.x11.display = ":0"
application.process.machine_id = "8256ba7d0e3911cd735ec8c4000004e6"
application.process.session_id = "8256ba7d0e3911cd735ec8c4000004e6-1315485233.832420-1663276741"
index: 12
driver: <module-x11-xsmp.c>
owner module: 21
properties:
application.name = "XSMP Session on KDE as 1095aaac77000131548528700000025440026"
xsmp.vendor = "KDE"
xsmp.client.id = "1095aaac77000131548528700000025440026"
index: 14
driver: <protocol-native.c>
owner module: 8
properties:
application.name = "libcanberra"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "16"
application.version = "0.26"
application.id = "org.freedesktop.libcanberra"
application.process.id = "3097"
application.process.user = "ask"
application.process.host = "ewzw032"
application.process.binary = "thunderbird-bin"
window.x11.display = ":0.0"
application.language = "de_CH.UTF-8"
application.process.machine_id = "8256ba7d0e3911cd735ec8c4000004e6"
application.process.session_id = "8256ba7d0e3911cd735ec8c4000004e6-1315485233.832420-1663276741"
index: 15
driver: <protocol-native.c>
owner module: 8
properties:
application.name = "KMix KDE 4"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "16"
application.process.id = "2454"
application.process.user = "ask"
application.process.host = "ewzw032"
application.process.binary = "kdeinit4"
application.language = "de_CH.UTF-8"
window.x11.display = ":0"
application.process.machine_id = "8256ba7d0e3911cd735ec8c4000004e6"
application.process.session_id = "8256ba7d0e3911cd735ec8c4000004e6-1315485233.832420-1663276741"
index: 17
driver: <protocol-native.c>
owner module: 8
properties:
application.name = "libphonon"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "16"
media.role = "event"
phonon.streamid = "{be9c1a83-a427-4c8f-8fc8-abeff57db2ef}"
application.process.id = "2557"
application.process.user = "ask"
application.process.host = "ewzw032"
application.process.binary = "knotify4"
application.language = "de_CH.UTF-8"
window.x11.display = ":0"
application.process.machine_id = "8256ba7d0e3911cd735ec8c4000004e6"
application.process.session_id = "8256ba7d0e3911cd735ec8c4000004e6-1315485233.832420-1663276741"
index: 203
driver: <protocol-native.c>
owner module: 8
properties:
application.name = "SFLphone"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "16"
media.role = "phone"
application.process.id = "8201"
application.process.user = "ask"
application.process.host = "ewzw032"
application.process.binary = "sflphoned"
application.language = "C"
window.x11.display = ":0"
application.process.machine_id = "8256ba7d0e3911cd735ec8c4000004e6"
application.process.session_id = "8256ba7d0e3911cd735ec8c4000004e6-1315485233.832420-1663276741"
index: 212
driver: <protocol-native.c>
owner module: 8
properties:
application.name = "libcanberra"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "16"
application.version = "0.26"
application.id = "org.freedesktop.libcanberra"
application.process.id = "3282"
application.process.user = "ask"
application.process.host = "ewzw032"
application.process.binary = "firefox-bin"
window.x11.display = ":0.0"
application.language = "de_CH.UTF-8"
application.process.machine_id = "8256ba7d0e3911cd735ec8c4000004e6"
application.process.session_id = "8256ba7d0e3911cd735ec8c4000004e6-1315485233.832420-1663276741"
index: 255
driver: <protocol-native.c>
owner module: 8
properties:
application.name = "PulseAudio Volume Meter"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "16"
application.process.id = "17581"
application.process.user = "ask"
application.process.host = "ewzw032"
application.process.binary = "pavumeter"
window.x11.display = ":0"
application.language = "de_CH.UTF-8"
application.process.machine_id = "8256ba7d0e3911cd735ec8c4000004e6"
application.process.session_id = "8256ba7d0e3911cd735ec8c4000004e6-1315485233.832420-1663276741"
application.icon_name = "pavumeter"
index: 260
driver: <protocol-native.c>
owner module: 8
properties:
application.name = "libphonon"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "16"
application.process.id = "17731"
application.process.user = "ask"
application.process.host = "ewzw032"
application.process.binary = "kcmshell4"
application.language = "de_CH.UTF-8"
window.x11.display = ":0"
application.process.machine_id = "8256ba7d0e3911cd735ec8c4000004e6"
application.process.session_id = "8256ba7d0e3911cd735ec8c4000004e6-1315485233.832420-1663276741"
index: 262
driver: <protocol-native.c>
owner module: 8
properties:
application.name = "kspeakersetup"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "16"
application.process.id = "17731"
application.process.user = "ask"
application.process.host = "ewzw032"
application.process.binary = "kcmshell4"
application.language = "de_CH.UTF-8"
window.x11.display = ":0"
application.process.machine_id = "8256ba7d0e3911cd735ec8c4000004e6"
application.process.session_id = "8256ba7d0e3911cd735ec8c4000004e6-1315485233.832420-1663276741"
index: 303
driver: <protocol-native.c>
owner module: 8
properties:
application.name = "knotify"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "16"
media.role = "event"
phonon.streamid = "{be9c1a83-a427-4c8f-8fc8-abeff57db2ef}"
application.process.id = "2557"
application.process.user = "ask"
application.process.host = "ewzw032"
application.process.binary = "knotify4"
application.language = "de_CH.UTF-8"
window.x11.display = ":0"
application.process.machine_id = "8256ba7d0e3911cd735ec8c4000004e6"
application.process.session_id = "8256ba7d0e3911cd735ec8c4000004e6-1315485233.832420-1663276741"
index: 309
driver: <protocol-native.c>
owner module: 8
properties:
application.name = "paplay"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "16"
media.format = "AU (Sun/NeXT)"
media.name = "/usr/share/sflphone/ringtones/phone.au"
application.process.id = "2332"
application.process.user = "ask"
application.process.host = "ewzw032"
application.process.binary = "pacat"
application.language = "de_CH.UTF-8"
window.x11.display = ":0"
application.process.machine_id = "8256ba7d0e3911cd735ec8c4000004e6"
application.process.session_id = "8256ba7d0e3911cd735ec8c4000004e6-1315485233.832420-1663276741"
index: 310
driver: <cli.c>
owner module: 30
properties:
application.name = "UNIX socket client"
2 card(s) available.
index: 0
name: <alsa_card.pci-0000_00_1b.0>
driver: <module-alsa-card.c>
owner module: 4
properties:
alsa.card = "0"
alsa.card_name = "HDA Intel"
alsa.long_card_name = "HDA Intel at 0xf01a0000 irq 42"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1b.0"
sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "293e"
device.product.name = "82801I (ICH9 Family) HD Audio Controller"
device.form_factor = "internal"
device.string = "0"
device.description = "Internes Audio"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
profiles:
output:analog-stereo: Analog Stereo Output (priority 6000)
output:analog-stereo+input:analog-stereo: Analog Stereo Duplex (priority 6060)
output:iec958-stereo: Digital Stereo Duplex (IEC958) (priority 5500)
output:iec958-stereo+input:analog-stereo: Digital Stereo (IEC958) Output + Analog Stereo Input (priority 5560)
input:analog-stereo: Analog Stereo Input (priority 60)
off: Aus (priority 0)
active profile: <output:analog-stereo+input:analog-stereo>
sinks:
alsa_output.pci-0000_00_1b.0.analog-stereo/#0: Internes Audio Analog Stereo
sources:
alsa_output.pci-0000_00_1b.0.analog-stereo.monitor/#0: Monitor of Internes Audio Analog Stereo
alsa_input.pci-0000_00_1b.0.analog-stereo/#1: Internes Audio Analog Stereo
index: 10
name: <bluez_card.00_1A_7D_60_67_1F>
driver: <module-bluetooth-device.c>
owner module: 32
properties:
device.description = "P311"
device.string = "00:1A:7D:60:67:1F"
device.api = "bluez"
device.class = "sound"
device.bus = "bluetooth"
device.form_factor = "headset"
bluez.path = "/org/bluez/2119/hci0/dev_00_1A_7D_60_67_1F"
bluez.class = "0x240404"
bluez.name = "P311"
device.icon_name = "audio-headset-bluetooth"
device.intended_roles = "phone"
profiles:
a2dp: High Fidelity-Wiedergabe (A2DP) (priority 10)
hsp: Telephony Duplex (HSP/HFP) (priority 20)
off: Aus (priority 0)
active profile: <a2dp>
sinks:
bluez_sink.00_1A_7D_60_67_1F/#10: P311
sources:
bluez_sink.00_1A_7D_60_67_1F.monitor/#11: Monitor of P311
2 sink input(s) available.
index: 243
driver: <protocol-native.c>
flags: START_CORKED
state: CORKED
sink: 0 <alsa_output.pci-0000_00_1b.0.analog-stereo>
volume: 0: 91% 1: 91%
0: -2.46 dB 1: -2.46 dB
balance 0.00
muted: no
current latency: 0.00 ms
requested latency: 90.00 ms
sample spec: float32le 2ch 48000Hz
channel map: front-left,front-right
Stereo
resample method: speex-float-3
module: 8
client: 303 <knotify>
properties:
media.name = "Playback Stream"
application.name = "knotify"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "16"
media.role = "event"
phonon.streamid = "{be9c1a83-a427-4c8f-8fc8-abeff57db2ef}"
application.process.id = "2557"
application.process.user = "ask"
application.process.host = "ewzw032"
application.process.binary = "knotify4"
application.language = "de_CH.UTF-8"
window.x11.display = ":0"
application.process.machine_id = "8256ba7d0e3911cd735ec8c4000004e6"
application.process.session_id = "8256ba7d0e3911cd735ec8c4000004e6-1315485233.832420-1663276741"
module-stream-restore.id = "sink-input-by-media-role:event"
index: 251
driver: <protocol-native.c>
flags:
state: RUNNING
sink: 10 <bluez_sink.00_1A_7D_60_67_1F>
volume: 0: 83%
0: -4.79 dB
balance 0.00
muted: no
current latency: 2000.07 ms
requested latency: 45.32 ms
sample spec: uLaw 1ch 8000Hz
channel map: mono
Mono
resample method: speex-float-3
module: 8
client: 309 <paplay>
properties:
media.format = "AU (Sun/NeXT)"
application.name = "paplay"
media.name = "/usr/share/sflphone/ringtones/phone.au"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "16"
application.process.id = "2332"
application.process.user = "ask"
application.process.host = "ewzw032"
application.process.binary = "pacat"
application.language = "de_CH.UTF-8"
window.x11.display = ":0"
application.process.machine_id = "8256ba7d0e3911cd735ec8c4000004e6"
application.process.session_id = "8256ba7d0e3911cd735ec8c4000004e6-1315485233.832420-1663276741"
module-stream-restore.id = "sink-input-by-application-name:paplay"
1 source outputs(s) available.
index: 14
driver: <protocol-native.c>
flags:
state: RUNNING
source: 1 <alsa_input.pci-0000_00_1b.0.analog-stereo>
current latency: 0.00 ms
requested latency: n/a
sample spec: float32le 2ch 44100Hz
channel map: front-left,front-right
Stereo
resample method: copy
owner module: 8
client: 255 <PulseAudio Volume Meter>
properties:
media.name = "PulseAudio Volume Meter"
application.name = "PulseAudio Volume Meter"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "16"
application.process.id = "17581"
application.process.user = "ask"
application.process.host = "ewzw032"
application.process.binary = "pavumeter"
window.x11.display = ":0"
application.language = "de_CH.UTF-8"
application.process.machine_id = "8256ba7d0e3911cd735ec8c4000004e6"
application.process.session_id = "8256ba7d0e3911cd735ec8c4000004e6-1315485233.832420-1663276741"
application.icon_name = "pavumeter"
module-stream-restore.id = "source-output-by-application-name:PulseAudio Volume Meter"
0 cache entrie(s) available.
>>>
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: amixer.txt
URL: <http://lists.freedesktop.org/archives/pulseaudio-discuss/attachments/20110909/f3062389/attachment-0002.txt>
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: getfacl-dev-snd.txt
URL: <http://lists.freedesktop.org/archives/pulseaudio-discuss/attachments/20110909/f3062389/attachment-0003.txt>
-------------- next part --------------
Sep 9 08:57:59 ewzw032 pulseaudio[2984]: ratelimit.c: 95 events suppressed
[…]
Sep 9 11:10:47 ewzw032 pulseaudio[2984]: ratelimit.c: 94 events suppressed
Sep 9 11:37:02 ewzw032 pulseaudio[2984]: ratelimit.c: 93 events suppressed
Sep 9 11:37:38 ewzw032 pulseaudio[2984]: module-bluetooth-device.c: Skipping 160061 us (= 28232 bytes) in audio stream
Sep 9 11:37:38 ewzw032 pulseaudio[2984]: module-bluetooth-device.c: Skipping 296858 us (= 52364 bytes) in audio stream
Sep 9 11:37:39 ewzw032 pulseaudio[2984]: module-bluetooth-device.c: Skipping 376112 us (= 66344 bytes) in audio stream
Sep 9 11:37:39 ewzw032 pulseaudio[2984]: module-bluetooth-device.c: Skipping 5234 us (= 920 bytes) in audio stream
Sep 9 11:37:40 ewzw032 pulseaudio[2984]: module-bluetooth-device.c: Skipping 752010 us (= 132652 bytes) in audio stream
Sep 9 11:37:40 ewzw032 pulseaudio[2984]: module-bluetooth-device.c: Skipping 296850 us (= 52364 bytes) in audio stream
[… LOADS of messages like the one before!]
Sep 9 11:38:16 ewzw032 pulseaudio[2984]: module-bluetooth-device.c: Skipping 134313 us (= 23692 bytes) in audio stream
Sep 9 11:38:17 ewzw032 pulseaudio[2984]: module-bluetooth-device.c: Skipping 137304 us (= 24220 bytes) in audio stream
Sep 9 11:38:17 ewzw032 pulseaudio[2984]: module-bluetooth-device.c: Skipping 152614 us (= 26920 bytes) in audio stream
Sep 9 11:38:18 ewzw032 pulseaudio[2984]: module-bluetooth-device.c: Skipping 275554 us (= 48604 bytes) in audio stream
[… LOADS of messages like the one before!]
Sep 9 12:09:00 ewzw032 pulseaudio[2984]: module-bluetooth-device.c: Skipping 276467 us (= 48768 bytes) in audio stream
Sep 9 12:09:01 ewzw032 pulseaudio[2984]: module-bluetooth-device.c: Skipping 296843 us (= 52360 bytes) in audio stream
Sep 9 12:09:01 ewzw032 pulseaudio[2984]: module-bluetooth-device.c: Skipping 276544 us (= 48780 bytes) in audio stream
Sep 9 12:09:02 ewzw032 pulseaudio[2984]: module-bluetooth-device.c: Skipping 296847 us (= 52360 bytes) in audio stream
Sep 9 12:09:02 ewzw032 pulseaudio[2984]: module-bluetooth-device.c: Skipping 276543 us (= 48780 bytes) in audio stream
Sep 9 12:09:03 ewzw032 pulseaudio[2984]: module-bluetooth-device.c: Skipping 303846 us (= 53596 bytes) in audio stream
Sep 9 12:09:03 ewzw032 pulseaudio[2984]: module-bluetooth-device.c: Skipping 188263 us (= 33208 bytes) in audio stream
Sep 9 12:09:04 ewzw032 pulseaudio[2984]: module-bluetooth-device.c: Skipping 296847 us (= 52360 bytes) in audio stream
Sep 9 12:09:04 ewzw032 pulseaudio[2984]: module-bluetooth-device.c: Skipping 215586 us (= 38028 bytes) in audio stream
Sep 9 12:09:05 ewzw032 pulseaudio[2984]: module-bluetooth-device.c: Skipping 296848 us (= 52360 bytes) in audio stream
More information about the pulseaudio-discuss
mailing list