[pulseaudio-discuss] udev detect not working with linux-3.0.3

[Colin Guthrie]

'Twas brillig, and John Frankish at 24/09/11 11:58 did gyre and gimble:
> I've tried pulseaudio-0.9.22/0.9.23/0.99.4 on two machines using linux-2.6.33.3 and the udev detection works.
> 
> If I try the above on the same machines using linux-3.0.3, udev detection does not detect my hardware (but I can use pulseaudio to stream music to Bluetooth headphones). Alsa works on the two machines with linux-2.6.33.3 and linux-3.0.3.
> 
> About the only difference between the linux-2.6.33.3 setup and the linux-3.0.3 setup is the version of libc - the udev version is the same on both and the following look to be the same:
> 
> 25-alsa.rules
> 78-sound-card.rules
> 90-pulseaudio.rules
> 
> Does anyone have any ideas as to what troubleshooting I can try?
> 
> pulseaudio -vv
> ....
> D: [pulseaudio] cli-command.c: Checking for existence of '/usr/local/lib/pulse-0.99/modules/module-udev-detect.so': success
> I: [pulseaudio] module-udev-detect.c: Found 0 cards.
> I: [pulseaudio] module.c: Loaded "module-udev-detect" (index: #4; argument: "")


 Pass more v's... try -vvvvv


There will be more reasons as to why it fond 0 cards.

Also check the output of:

cat /proc/asound/cards
getfacl /dev/snd/pcm*

Cheers

Col

-- 

Colin Guthrie
gmane(at)colin.guthr.ie
http://colin.guthr.ie/

Day Job:
  Tribalogic Limited [http://www.tribalogic.net/]
Open Source:
  Mageia Contributor [http://www.mageia.org/]
  PulseAudio Hacker [http://www.pulseaudio.org/]
  Trac Hacker [http://trac.edgewall.org/]