[pulseaudio-discuss] [PATCH 4/4] pacmd: Add functions to handle the latency offset

poljar (Damir Jelic) poljarinho at gmail.com
Sun Jun 17 05:47:47 PDT 2012


From: poljar <poljarinho at gmail.com>

pacmd was extended so it can handle the new latency offset.

Two new functions were introduced which enable setting and printing the
latency offset for a specified port.
---
 src/pulsecore/cli-command.c |   87 +++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 87 insertions(+)

diff --git a/src/pulsecore/cli-command.c b/src/pulsecore/cli-command.c
index fc9465b..c346920 100644
--- a/src/pulsecore/cli-command.c
+++ b/src/pulsecore/cli-command.c
@@ -135,6 +135,8 @@ static int pa_cli_command_update_source_output_proplist(pa_core *c, pa_tokenizer
 static int pa_cli_command_card_profile(pa_core *c, pa_tokenizer *t, pa_strbuf *buf, pa_bool_t *fail);
 static int pa_cli_command_sink_port(pa_core *c, pa_tokenizer *t, pa_strbuf *buf, pa_bool_t *fail);
 static int pa_cli_command_source_port(pa_core *c, pa_tokenizer *t, pa_strbuf *buf, pa_bool_t *fail);
+static int pa_cli_command_set_latency_offset(pa_core *c, pa_tokenizer *t, pa_strbuf *buf, pa_bool_t *fail);
+static int pa_cli_command_get_latency_offset(pa_core *c, pa_tokenizer *t, pa_strbuf *buf, pa_bool_t *fail);
 static int pa_cli_command_dump_volumes(pa_core *c, pa_tokenizer *t, pa_strbuf *buf, pa_bool_t *fail);
 
 /* A method table for all available commands */
@@ -168,6 +170,8 @@ static const struct command commands[] = {
     { "set-card-profile",        pa_cli_command_card_profile,       "Change the profile of a card (args: index|name, profile-name)", 3},
     { "set-sink-port",           pa_cli_command_sink_port,          "Change the port of a sink (args: index|name, port-name)", 3},
     { "set-source-port",         pa_cli_command_source_port,        "Change the port of a source (args: index|name, port-name)", 3},
+    { "set-latency-offset",      pa_cli_command_set_latency_offset, "Change the latency of a port (args: index|name, port-name, latency-offset)", 4},
+    { "get-latency-offset",      pa_cli_command_get_latency_offset, "Show the latency of a port (args: index|name, port-name)", 3},
     { "suspend-sink",            pa_cli_command_suspend_sink,       "Suspend sink (args: index|name, bool)", 3},
     { "suspend-source",          pa_cli_command_suspend_source,     "Suspend source (args: index|name, bool)", 3},
     { "suspend",                 pa_cli_command_suspend,            "Suspend all sinks and all sources (args: bool)", 2},
@@ -1723,6 +1727,89 @@ static int pa_cli_command_source_port(pa_core *c, pa_tokenizer *t, pa_strbuf *bu
     return 0;
 }
 
+static int pa_cli_command_set_latency_offset(pa_core *c, pa_tokenizer *t, pa_strbuf *buf, pa_bool_t *fail) {
+    const char *n, *p, *l;
+    pa_device_port *port;
+    pa_card *card;
+    uint32_t latency;
+
+    pa_core_assert_ref(c);
+    pa_assert(t);
+    pa_assert(buf);
+    pa_assert(fail);
+
+    if (!(n = pa_tokenizer_get(t, 1))) {
+        pa_strbuf_puts(buf, "You need to specify a card either by its name or its index.\n");
+        return -1;
+    }
+
+    if (!(p = pa_tokenizer_get(t, 2))) {
+        pa_strbuf_puts(buf, "You need to specify a port by its name.\n");
+        return -1;
+    }
+
+    if (!(l = pa_tokenizer_get(t, 3))) {
+        pa_strbuf_puts(buf, "You need to specify a latency offset.\n");
+        return -1;
+    }
+
+    if (pa_atou(l, &latency) < 0) {
+        pa_strbuf_puts(buf, "Failed to parse latency.\n");
+        return -1;
+    }
+
+    if (!(card = pa_namereg_get(c, n, PA_NAMEREG_CARD))) {
+        pa_strbuf_puts(buf, "No card found by this name or index.\n");
+        return -1;
+    }
+
+    if (!(port = pa_hashmap_get(card->ports, p))) {
+        pa_strbuf_puts(buf, "No port found by this name.\n");
+        return -1;
+    }
+
+    pa_device_port_set_latency_offset(port, (pa_usec_t) latency);
+
+    return 0;
+}
+
+static int pa_cli_command_get_latency_offset(pa_core *c, pa_tokenizer *t, pa_strbuf *buf, pa_bool_t *fail) {
+    const char *n, *p;
+    pa_device_port *port;
+    pa_card *card;
+    pa_usec_t latency;
+
+    pa_core_assert_ref(c);
+    pa_assert(t);
+    pa_assert(buf);
+    pa_assert(fail);
+
+    if (!(n = pa_tokenizer_get(t, 1))) {
+        pa_strbuf_puts(buf, "You need to specify a card either by its name or its index.\n");
+        return -1;
+    }
+
+    if (!(p = pa_tokenizer_get(t, 2))) {
+        pa_strbuf_puts(buf, "You need to specify a port by its name.\n");
+        return -1;
+    }
+
+    if (!(card = pa_namereg_get(c, n, PA_NAMEREG_CARD))) {
+        pa_strbuf_puts(buf, "No card found by this name or index.\n");
+        return -1;
+    }
+
+    if (!(port = pa_hashmap_get(card->ports, p))) {
+        pa_strbuf_puts(buf, "No port found by this name.\n");
+        return -1;
+    }
+
+    latency = pa_device_port_get_latency_offset(port);
+
+    pa_strbuf_printf(buf, "%.2f", (double) latency);
+    return 0;
+}
+
 static int pa_cli_command_dump(pa_core *c, pa_tokenizer *t, pa_strbuf *buf, pa_bool_t *fail) {
     pa_module *m;
     pa_sink *sink;
-- 
1.7.10.4



More information about the pulseaudio-discuss mailing list