[pulseaudio-discuss] Windows installation help

[Dave Horoschak]

Please find output below.
 - Dave


On May 9, 2012 at 1:00 PM Arun Raghavan <arun.raghavan at collabora.co.uk>
wrote:

> On Mon, 2012-05-07 at 18:31 -0400, Dave Horoschak wrote:
> > Before moving to Android, I'm trying to get PulseAudio working on two
> > WinXP machines, just to get started.  I can't even get through the
> > "Easy Steps" in the wiki, so that doesn't bode well for the future.
> [...]
> > If there's a directory that I should create before running, I couldn't
> > find any documentation on it.  And if there is Windows-specific
> > documentation I couldn't find that either.
>
> Maarten did a bunch of work to get these builds going, but I guess he
> hasn't had time to keep them updated. I've never actually tries these
> out, but could you post the output of running pulseaudio with -vvvv?
>
> Regards,
> Arun
>
> _______________________________________________
> pulseaudio-discuss mailing list
> pulseaudio-discuss at lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/pulseaudio-discuss




C:\PulseAudio\bin>pulseaudio -vvvv
I: [(null)] pulsecore/core-util.c: Successfully gained high priority class.
I: [(null)] daemon/main.c: This is PulseAudio 1.1
D: [(null)] daemon/main.c: Compilation host: i686-w64-mingw32
D: [(null)] daemon/main.c: Compilation CFLAGS: -O2 -g -pipe -Wall
-fexceptions -
-param=ssp-buffer-size=4 -mms-bitfields -W -Wextra -Wno-long-long -Wvla
-Wno-ove
rlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wlogical-op
-Wsi
gn-compare -Wformat-security -Wmissing-include-dirs -Wformat-nonliteral
-Wpointe
r-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal
-Wmissing-protot
ypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow
-Wendi
f-labels -Wcast-align -Wstrict-aliasing -Wwrite-strings
-Wno-unused-parameter -f
fast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option
D: [(null)] daemon/main.c: Running on host: Windows 5.1 (2600) Service Pack
3
D: [(null)] daemon/main.c: Found 1 CPUs.
I: [(null)] daemon/main.c: Page size is 4096 bytes
D: [(null)] daemon/main.c: Compiled with Valgrind support: no
D: [(null)] daemon/main.c: Running in valgrind mode: no
D: [(null)] daemon/main.c: Running in VM: no
D: [(null)] daemon/main.c: Optimized build: yes
D: [(null)] daemon/main.c: All asserts enabled.
I: [(null)] daemon/main.c: Machine ID is 69GL4R1.
W: [(null)] pulsecore/core-util.c: Secure directory creation not supported
on Wi
n32.
I: [(null)] daemon/main.c: Using runtime directory C:\Documents and
Settings\dho
roschak\.pulse\69GL4R1-runtime.
W: [(null)] pulsecore/core-util.c: Secure directory creation not supported
on Wi
n32.
I: [(null)] daemon/main.c: Using state directory C:\Documents and
Settings\dhoro
schak\.pulse.
I: [(null)] daemon/main.c: Using modules directory
C:\PulseAudio\lib\pulse-1.1\m
odules.
I: [(null)] daemon/main.c: Running in system mode: no
W: [(null)] pulsecore/core-util.c: Secure directory creation not supported
on Wi
n32.
I: [(null)] daemon/main.c: Fresh high-resolution timers available! Bon
appetit!
W: [(null)] pulsecore/core.c: failed to allocate shared memory pool.
Falling bac
k to a normal memory pool.
D: [(null)] pulsecore/memblock.c: Using private memory pool with 1024 slots
of s
ize 64.0 KiB each, total size is 64.0 MiB, maximum usable slot size is
65496
I: [(null)] pulsecore/cpu-x86.c: CPU flags: CMOV MMX SSE SSE2 SSE3 SSSE3
SSE4_1
SSE4_2
I: [(null)] pulsecore/svolume_mmx.c: Initialising MMX optimized volume
functions
.
I: [(null)] pulsecore/remap_mmx.c: Initialising MMX optimized remappers.
I: [(null)] pulsecore/svolume_sse.c: Initialising SSE2 optimized volume
function
s.
I: [(null)] pulsecore/remap_sse.c: Initialising SSE2 optimized remappers.
I: [(null)] pulsecore/sconv_sse.c: Initialising SSE2 optimized conversions.
I: [(null)] pulsecore/svolume_orc.c: Initialising ORC optimized volume
functions
.
D: [(null)] pulsecore/memblock.c: Memory block too large for pool: 80764 >
65536

D: [(null)] pulsecore/core-scache.c: Created sample "x11-bell" (#0), 80764
bytes
 with sample spec s16le 2ch 22050Hz
W: [(null)] pulsecore/core-util.c: Secure directory creation not supported
on Wi
n32.
I: [(null)] modules/module-device-restore.c: Successfully opened database
file '
C:\Documents and Settings\dhoroschak\.pulse\69GL4R1-device-volumes'.
I: [(null)] pulsecore/module.c: Loaded "module-device-restore" (index: #0;
argum
ent: "").
W: [(null)] pulsecore/core-util.c: Secure directory creation not supported
on Wi
n32.
I: [(null)] modules/module-stream-restore.c: Successfully opened database
file '
C:\Documents and Settings\dhoroschak\.pulse\69GL4R1-stream-volumes'.
I: [(null)] pulsecore/module.c: Loaded "module-stream-restore" (index: #1;
argum
ent: "").
W: [(null)] pulsecore/core-util.c: Secure directory creation not supported
on Wi
n32.
I: [(null)] modules/module-card-restore.c: Successfully opened database
file 'C:
\Documents and Settings\dhoroschak\.pulse\69GL4R1-card-database'.
I: [(null)] pulsecore/module.c: Loaded "module-card-restore" (index: #2;
argumen
t: "").
I: [(null)] pulsecore/module.c: Loaded "module-augment-properties" (index:
#3; a
rgument: "").
D: [(null)] modules/module-waveout.c: WaveIn subsystem opened.
D: [(null)] modules/module-waveout.c: WaveOut subsystem opened.
D: [(null)] modules/module-device-restore.c: Database contains invalid data
for
key: source:input (probably pre-v1.0 data)
D: [(null)] modules/module-device-restore.c: Attempting to load legacy
(pre-v1.0
) data for key: source:input
D: [(null)] modules/module-device-restore.c: Size does not match.
D: [(null)] modules/module-device-restore.c: Unable to load legacy
(pre-v1.0) da
ta for key: source:input. Ignoring.
D: [(null)] modules/module-device-restore.c: Database contains invalid data
for
key: source:input:null
I: [(null)] pulsecore/source.c: Created source 0 "input" with sample spec
s16le
2ch 44100Hz and channel map front-left,front-right
I: [(null)] pulsecore/source.c:     device.icon_name =
"audio-input-microphone"
D: [(null)] pulsecore/core-subscribe.c: Dropped redundant event due to
change ev
ent.
D: [(null)] modules/module-device-restore.c: Database contains invalid data
for
key: sink:output (probably pre-v1.0 data)
D: [(null)] modules/module-device-restore.c: Attempting to load legacy
(pre-v1.0
) data for key: sink:output
D: [(null)] modules/module-device-restore.c: Size does not match.
D: [(null)] modules/module-device-restore.c: Unable to load legacy
(pre-v1.0) da
ta for key: sink:output. Ignoring.
D: [(null)] modules/module-device-restore.c: Database contains invalid data
for
key: sink:output:null
I: [(null)] pulsecore/sink.c: Created sink 0 "output" with sample spec
s16le 2ch
 44100Hz and channel map front-left,front-right
I: [(null)] pulsecore/sink.c:     device.icon_name = "audio-card"
D: [(null)] pulsecore/core-subscribe.c: Dropped redundant event due to
change ev
ent.
D: [(null)] modules/module-device-restore.c: Database contains invalid data
for
key: source:output.monitor (probably pre-v1.0 data)
D: [(null)] modules/module-device-restore.c: Attempting to load legacy
(pre-v1.0
) data for key: source:output.monitor
D: [(null)] modules/module-device-restore.c: Size does not match.
D: [(null)] modules/module-device-restore.c: Unable to load legacy
(pre-v1.0) da
ta for key: source:output.monitor. Ignoring.
D: [(null)] modules/module-device-restore.c: Database contains invalid data
for
key: source:output.monitor:null
I: [(null)] pulsecore/source.c: Created source 1 "output.monitor" with
sample sp
ec s16le 2ch 44100Hz and channel map front-left,front-right
I: [(null)] pulsecore/source.c:     device.description = "Monitor of
output"
I: [(null)] pulsecore/source.c:     device.class = "monitor"
I: [(null)] pulsecore/source.c:     device.icon_name =
"audio-input-microphone"
D: [(null)] modules/module-waveout.c: Poll timeout = 23.2 ms
D: [(null)] modules/module-waveout.c: Thread starting up
I: [(null)] pulsecore/core-util.c: Successfully enabled
THREAD_PRIORITY_TIME_CRI
TICAL scheduling for thread.
D: [(null)] modules/module-device-restore.c: Database contains invalid data
for
key: sink:output:null
I: [(null)] pulsecore/module.c: Loaded "module-waveout" (index: #4;
argument: "s
ink_name=output source_name=input").
D: [(null)] pulsecore/cli-command.c: Checking for existence of
'C\module-detect.
so': failure
D: [(null)] pulsecore/cli-command.c: Checking for existence of
'/PulseAudio/lib/
pulse-1.1/modules\module-detect.so': failure
D: [(null)] pulsecore/cli-command.c: Checking for existence of
'C\module-jackdbu
s-detect.so': failure
D: [(null)] pulsecore/cli-command.c: Checking for existence of
'/PulseAudio/lib/
pulse-1.1/modules\module-jackdbus-detect.so': failure
E: [(null)] daemon/main.c: Failed to load directory.
I: [(null)] daemon/main.c: Daemon startup complete.
D: [(null)] modules/module-device-restore.c: Database contains invalid data
for
key: sink:output (probably pre-v1.0 data)
D: [(null)] modules/module-device-restore.c: Attempting to load legacy
(pre-v1.0
) data for key: sink:output
D: [(null)] modules/module-device-restore.c: Size does not match.
D: [(null)] modules/module-device-restore.c: Unable to load legacy
(pre-v1.0) da
ta for key: sink:output. Ignoring.
D: [(null)] modules/module-device-restore.c: Database contains invalid data
for
key: sink:output:null
D: [(null)] modules/module-waveout.c: WaveIn overflow!
I: [(null)] modules/module-device-restore.c: Storing port for device
sink:output
.
I: [(null)] modules/module-device-restore.c: Storing volume/mute for
device+port
 sink:output:null.
D: [(null)] modules/module-device-restore.c: Database contains invalid data
for
key: source:output.monitor (probably pre-v1.0 data)
D: [(null)] modules/module-device-restore.c: Attempting to load legacy
(pre-v1.0
) data for key: source:output.monitor
D: [(null)] modules/module-device-restore.c: Size does not match.
D: [(null)] modules/module-device-restore.c: Unable to load legacy
(pre-v1.0) da
ta for key: source:output.monitor. Ignoring.
D: [(null)] modules/module-device-restore.c: Database contains invalid data
for
key: source:output.monitor:null
I: [(null)] modules/module-device-restore.c: Storing port for device
source:outp
ut.monitor.
I: [(null)] modules/module-device-restore.c: Storing volume/mute for
device+port
 source:output.monitor:null.
D: [(null)] modules/module-device-restore.c: Database contains invalid data
for
key: source:input (probably pre-v1.0 data)
D: [(null)] modules/module-device-restore.c: Attempting to load legacy
(pre-v1.0
) data for key: source:input
D: [(null)] modules/module-device-restore.c: Size does not match.
D: [(null)] modules/module-device-restore.c: Unable to load legacy
(pre-v1.0) da
ta for key: source:input. Ignoring.
D: [(null)] modules/module-device-restore.c: Database contains invalid data
for
key: source:input:null
I: [(null)] modules/module-device-restore.c: Storing port for device
source:inpu
t.
I: [(null)] modules/module-device-restore.c: Storing volume/mute for
device+port
 source:input:null.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freedesktop.org/archives/pulseaudio-discuss/attachments/20120509/115f84b8/attachment.htm>