[pulseaudio-discuss] usb headset microphone will not work with pulseaudio

Sat Oct 27 19:33:37 PDT 2012

> > > > > > The log shows that udev reports the device getting repeatedly
> > > > > > removed and added, so that problem is at a lower level than
pulseaudio.
> > > > > >
> > > > > > It's certainly possible to disable the internal sound card in
> > > > > > pavucontrol. Go to the Configuration tab and select the "Off"
> > > > > > profile for the internal card.
> > > > >
> > > > > I tried disabling the internal card, but the next time the usb
> > > > > headset reappears, the internal card is re-enabled.
> > > >
> > > > Do you mean that you set the internal card profile to "Off", but
> > > > after the headset reappears, the internal card profile changes to
> > > > something else than "Off"? That's strange... Log of you doing that
might be interesting.
> > >
> > > Affirmative, when the headset reappears then internal card is reset to
> > > stereo output/mono input.
> > > The log was attached to the first post.
> >
> > Ok, so you changed the internal card profile to "Off" in pavucontrols
> > "Configuration" tab when you took that log? I can't see that happening
in the
> > log.
>
> Log attached - however, when I disable the internal card, the pulseaudio
daemon quits and the log stops.
> When I start the deamon and log again, the internal card is re-enabled
(which I guess might be expected).
>

post the output of alsa-info.sh and lsusv -vvv of logitech headset

  10.329|   0.008) D: [pulseaudio] module-udev-detect.c: /dev/snd/controlC1
is accessible: yes
(  10.329|   0.000) D: [pulseaudio] module-udev-detect.c:
/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/sound/card1 is
busy: no
(  10.329|   0.000) D: [pulseaudio] module-udev-detect.c: Loading
module-alsa-card with arguments 'device_id="1"
name="usb-Logitech_Logitech_USB_Headset-00-Headset"
card_name="alsa_card.usb-Logitech_Logitech_USB_Headset-00-Headset"
namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no
deferred_volume=yes card_properties="module-udev-detect.discovered=1"'
(  10.330|   0.000) D: [pulseaudio] reserve-wrap.c: Successfully acquired
reservation lock on device 'Audio1'
(  10.332|   0.001) D: [pulseaudio] alsa-mixer.c: Looking at profile
output:analog-mono
(  10.332|   0.000) D: [pulseaudio] alsa-mixer.c: Checking for playback on
Analog Mono (analog-mono)
(  10.332|   0.000) D: [pulseaudio] alsa-util.c: Trying hw:1 with
SND_PCM_NO_AUTO_FORMAT ...
(  10.332|   0.000) D: [pulseaudio] alsa-util.c: Managed to open hw:1
(  10.332|   0.000) D: [pulseaudio] alsa-util.c: Maximum hw buffer size is
11888 ms
(  10.333|   0.000) I: [pulseaudio] (alsa-lib)pcm_hw.c:
SNDRV_PCM_IOCTL_PREPARE failed (-32)
(  10.334|   0.000) I: [pulseaudio] (alsa-lib)pcm_hw.c:
SNDRV_PCM_IOCTL_PREPARE failed (-32)
(  10.335|   0.000) I: [pulseaudio] (alsa-lib)pcm_hw.c:
SNDRV_PCM_IOCTL_PREPARE failed (-32)
(  10.335|   0.000) I: [pulseaudio] (alsa-lib)pcm_hw.c:
SNDRV_PCM_IOCTL_PREPARE failed (-32)
(  10.335|   0.000) D: [pulseaudio] alsa-util.c: Set neither period nor
buffer size.
(  10.336|   0.000) I: [pulseaudio] (alsa-lib)pcm_hw.c:
SNDRV_PCM_IOCTL_PREPARE failed (-32)
(  10.336|   0.000) I: [pulseaudio] alsa-util.c: snd_pcm_hw_params failed:
Broken pipe
(  10.337|   0.000) D: [pulseaudio] alsa-util.c: Trying hw:1 without
SND_PCM_NO_AUTO_FORMAT ...
(  10.337|   0.000) D: [pulseaudio] alsa-util.c: Managed to open hw:1
(  10.337|   0.000) D: [pulseaudio] alsa-util.c: Maximum hw buffer size is
11888 ms
(  10.338|   0.000) I: [pulseaudio] (alsa-lib)pcm_hw.c:
SNDRV_PCM_IOCTL_PREPARE failed (-32)
(  10.338|   0.000) I: [pulseaudio] (alsa-lib)pcm_hw.c:
SNDRV_PCM_IOCTL_PREPARE failed (-32)
(  10.339|   0.000) I: [pulseaudio] (alsa-lib)pcm_hw.c:
SNDRV_PCM_IOCTL_PREPARE failed (-32)
(  10.340|   0.000) I: [pulseaudio] (alsa-lib)pcm_hw.c:
SNDRV_PCM_IOCTL_PREPARE failed (-32)
(  10.340|   0.000) D: [pulseaudio] alsa-util.c: Set neither period nor
buffer size.
(  10.340|   0.000) I: [pulseaudio] (alsa-lib)pcm_hw.c:
SNDRV_PCM_IOCTL_PREPARE failed (-32)
(  10.340|   0.000) I: [pulseaudio] alsa-util.c: snd_pcm_hw_params failed:
Broken pipe
(  10.341|   0.000) D: [pulseaudio] alsa-util.c: Trying plug:hw:1 with
SND_PCM_NO_AUTO_FORMAT ...
(  10.341|   0.000) D: [pulseaudio] alsa-util.c: Managed to open plug:hw:1
(  10.341|   0.000) D: [pulseaudio] alsa-util.c: Maximum hw buffer size is
11888 ms
(  10.342|   0.000) I: [pulseaudio] (alsa-lib)pcm_hw.c:
SNDRV_PCM_IOCTL_PREPARE failed (-32)
(  10.343|   0.000) I: [pulseaudio] (alsa-lib)pcm_hw.c:
SNDRV_PCM_IOCTL_PREPARE failed (-32)
(  10.343|   0.000) I: [pulseaudio] (alsa-lib)pcm_hw.c:
SNDRV_PCM_IOCTL_PREPARE failed (-32)
(  10.344|   0.000) I: [pulseaudio] (alsa-lib)pcm_hw.c:
SNDRV_PCM_IOCTL_PREPARE failed (-32)
(  10.344|   0.000) D: [pulseaudio] alsa-util.c: Set neither period nor
buffer size.
(  10.345|   0.001) I: [pulseaudio] (alsa-lib)pcm_hw.c:
SNDRV_PCM_IOCTL_PREPARE failed (-32)
(  10.345|   0.000) I: [pulseaudio] alsa-util.c: snd_pcm_hw_params failed:
Broken pipe
(  10.345|   0.000) D: [pulseaudio] alsa-util.c: Trying plug:hw:1 without
SND_PCM_NO_AUTO_FORMAT ...
(  10.346|   0.000) D: [pulseaudio] alsa-util.c: Managed to open plug:hw:1
(  10.346|   0.000) D: [pulseaudio] alsa-util.c: Maximum hw buffer size is
11888 ms
(  10.348|   0.001) I: [pulseaudio] (alsa-lib)pcm_hw.c:
SNDRV_PCM_IOCTL_PREPARE failed (-32)
(  10.348|   0.000) I: [pulseaudio] (alsa-lib)pcm_hw.c:
SNDRV_PCM_IOCTL_PREPARE failed (-32)
(  10.349|   0.000) I: [pulseaudio] (alsa-lib)pcm_hw.c:
SNDRV_PCM_IOCTL_PREPARE failed (-32)
(  10.350|   0.001) I: [pulseaudio] (alsa-lib)pcm_hw.c:
SNDRV_PCM_IOCTL_PREPARE failed (-32)
(  10.350|   0.000) D: [pulseaudio] alsa-util.c: Set neither period nor
buffer size.
(  10.352|   0.001) I: [pulseaudio] (alsa-lib)pcm_hw.c:
SNDRV_PCM_IOCTL_PREPARE failed (-32)
(  10.352|   0.000) I: [pulseaudio] alsa-util.c: snd_pcm_hw_params failed:
Broken pipe
(  10.352|   0.000) I: [pulseaudio] alsa-util.c: Failed to set hardware
parameters on plug:hw:1: Broken pipe
(  10.352|   0.000) D: [pulseaudio] alsa-mixer.c: Looking at profile
output:analog-mono+input:analog-mono
(  10.352|   0.000) D: [pulseaudio] alsa-mixer.c: Checking for playback on
Analog Mono (analog-mono)
(  10.352|   0.000) D: [pulseaudio] alsa-util.c: Trying hw:1 with
SND_PCM_NO_AUTO_FORMAT ...
(  10.352|   0.000) D: [pulseaudio] alsa-util.c: Managed to open hw:1
(  10.352|   0.000) D: [pulseaudio] alsa-util.c: Maximum hw buffer size is
11888 ms
(  10.353|   0.000) I: [pulseaudio] (alsa-lib)pcm_hw.c:
SNDRV_PCM_IOCTL_PREPARE failed (-32)
(  10.354|   0.000) I: [pulseaudio] (alsa-lib)pcm_hw.c:
SNDRV_PCM_IOCTL_PREPARE failed (-32)
(  10.354|   0.000) I: [pulseaudio] (alsa-lib)pcm_hw.c:
SNDRV_PCM_IOCTL_PREPARE failed (-32)
(  10.356|   0.001) I: [pulseaudio] (alsa-lib)pcm_hw.c:
SNDRV_PCM_IOCTL_PREPARE failed (-32)
(  10.356|   0.000) D: [pulseaudio] alsa-util.c: Set neither period nor
buffer size.
(  10.357|   0.001) I: [pulseaudio] (alsa-lib)pcm_hw.c:
SNDRV_PCM_IOCTL_PREPARE failed (-32)
(  10.357|   0.000) I: [pulseaudio] alsa-util.c: snd_pcm_hw_params failed:
Broken pipe
(  10.357|   0.000) D: [pulseaudio] alsa-util.c: Trying hw:1 without
SND_PCM_NO_AUTO_FORMAT ...
(  10.358|   0.000) D: [pulseaudio] alsa-util.c: Managed to open hw:1
(  10.358|   0.000) D: [pulseaudio] alsa-util.c: Maximum hw buffer size is
11888 ms
(  10.359|   0.001) I: [pulseaudio] (alsa-lib)pcm_hw.c:
SNDRV_PCM_IOCTL_PREPARE failed (-32)
(  10.359|   0.000) I: [pulseaudio] (alsa-lib)pcm_hw.c:
SNDRV_PCM_IOCTL_PREPARE failed (-32)
(  10.360|   0.000) I: [pulseaudio] (alsa-lib)pcm_hw.c:
SNDRV_PCM_IOCTL_PREPARE failed (-32)
(  10.361|   0.001) I: [pulseaudio] (alsa-lib)pcm_hw.c:
SNDRV_PCM_IOCTL_PREPARE failed (-32)
(  10.361|   0.000) D: [pulseaudio] alsa-util.c: Set neither period nor
buffer size.
(  10.362|   0.001) I: [pulseaudio] (alsa-lib)pcm_hw.c:
SNDRV_PCM_IOCTL_PREPARE failed (-32)
(  10.362|   0.000) I: [pulseaudio] alsa-util.c: snd_pcm_hw_params failed:
Broken pipe
(  10.363|   0.000) D: [pulseaudio] alsa-util.c: Trying plug:hw:1 with
SND_PCM_NO_AUTO_FORMAT ...
(  10.363|   0.000) D: [pulseaudio] alsa-util.c: Managed to open plug:hw:1
(  10.363|   0.000) D: [pulseaudio] alsa-util.c: Maximum hw buffer size is
11888 ms
(  10.365|   0.001) I: [pulseaudio] (alsa-lib)pcm_hw.c:
SNDRV_PCM_IOCTL_PREPARE failed (-32)
(  10.365|   0.000) I: [pulseaudio] (alsa-lib)pcm_hw.c:
SNDRV_PCM_IOCTL_PREPARE failed (-32)
(  10.366|   0.000) I: [pulseaudio] (alsa-lib)pcm_hw.c:
SNDRV_PCM_IOCTL_PREPARE failed (-32)
(  10.367|   0.001) I: [pulseaudio] (alsa-lib)pcm_hw.c:
SNDRV_PCM_IOCTL_PREPARE failed (-32)
(  10.367|   0.000) D: [pulseaudio] alsa-util.c: Set neither period nor
buffer size.
(  10.369|   0.001) I: [pulseaudio] (alsa-lib)pcm_hw.c:
SNDRV_PCM_IOCTL_PREPARE failed (-32)
(  10.369|   0.000) I: [pulseaudio] alsa-util.c: snd_pcm_hw_params failed:
Broken pipe
(  10.369|   0.000) D: [pulseaudio] alsa-util.c: Trying plug:hw:1 without
SND_PCM_NO_AUTO_FORMAT ...
(  10.369|   0.000) D: [pulseaudio] alsa-util.c: Managed to open plug:hw:1
(  10.370|   0.000) D: [pulseaudio] alsa-util.c: Maximum hw buffer size is
11888 ms
(  10.371|   0.001) I: [pulseaudio] (alsa-lib)pcm_hw.c:
SNDRV_PCM_IOCTL_PREPARE failed (-32)
(  10.372|   0.000) I: [pulseaudio] (alsa-lib)pcm_hw.c:
SNDRV_PCM_IOCTL_PREPARE failed (-32)
(  10.373|   0.000) I: [pulseaudio] (alsa-lib)pcm_hw.c:
SNDRV_PCM_IOCTL_PREPARE failed (-32)
(  10.374|   0.001) I: [pulseaudio] (alsa-lib)pcm_hw.c:
SNDRV_PCM_IOCTL_PREPARE failed (-32)
(  10.374|   0.000) D: [pulseaudio] alsa-util.c: Set neither period nor
buffer size.
(  10.375|   0.001) I: [pulseaudio] (alsa-lib)pcm_hw.c:
SNDRV_PCM_IOCTL_PREPARE failed (-32)
(  10.375|   0.000) I: [pulseaudio] alsa-util.c: snd_pcm_hw_params failed:
Broken pipe
(  10.375|   0.000) I: [pulseaudio] alsa-util.c: Failed to set hardware
parameters on plug:hw:1: Broken pipe
(  10.376|   0.000) D: [pulseaudio] alsa-mixer.c: Looking at profile
output:analog-mono+input:analog-stereo
(  10.376|   0.000) D: [pulseaudio] alsa-mixer.c: Checking for playback on
Analog Mono (analog-mono)
(  10.376|   0.000) D: [pulseaudio] alsa-util.c: Trying hw:1 with
SND_PCM_NO_AUTO_FORMAT ...
(  10.376|   0.000) D: [pulseaudio] alsa-util.c: Managed to open hw:1
(  10.376|   0.000) D: [pulseaudio] alsa-util.c: Maximum hw buffer size is
11888 ms
(  10.377|   0.000) I: [pulseaudio] (alsa-lib)pcm_hw.c:
SNDRV_PCM_IOCTL_PREPARE failed (-32)
(  10.378|   0.000) I: [pulseaudio] (alsa-lib)pcm_hw.c:
SNDRV_PCM_IOCTL_PREPARE failed (-32)
(  10.379|   0.000) I: [pulseaudio] (alsa-lib)pcm_hw.c:
SNDRV_PCM_IOCTL_PREPARE failed (-32)
(  10.380|   0.000) I: [pulseaudio] (alsa-lib)pcm_hw.c:
SNDRV_PCM_IOCTL_PREPARE failed (-32)
(  10.380|   0.000) D: [pulseaudio] alsa-util.c: Set neither period nor
buffer size.
(  10.381|   0.001) I: [pulseaudio] (alsa-lib)pcm_hw.c:
SNDRV_PCM_IOCTL_PREPARE failed (-32)
(  10.381|   0.000) I: [pulseaudio] alsa-util.c: snd_pcm_hw_params failed:
Broken pipe
(  10.381|   0.000) D: [pulseaudio] alsa-util.c: Trying hw:1 without
SND_PCM_NO_AUTO_FORMAT ...
(  10.381|   0.000) D: [pulseaudio] alsa-util.c: Managed to open hw:1
(  10.381|   0.000) D: [pulseaudio] alsa-util.c: Maximum hw buffer size is
11888 ms
(  10.382|   0.000) I: [pulseaudio] (alsa-lib)pcm_hw.c:
SNDRV_PCM_IOCTL_PREPARE failed (-32)
(  10.383|   0.000) I: [pulseaudio] (alsa-lib)pcm_hw.c:
SNDRV_PCM_IOCTL_PREPARE failed (-32)
(  10.384|   0.000) I: [pulseaudio] (alsa-lib)pcm_hw.c:
SNDRV_PCM_IOCTL_PREPARE failed (-32)
(  10.385|   0.001) I: [pulseaudio] (alsa-lib)pcm_hw.c:
SNDRV_PCM_IOCTL_PREPARE failed (-32)
(  10.385|   0.000) D: [pulseaudio] alsa-util.c: Set neither period nor
buffer size.
(  10.386|   0.001) I: [pulseaudio] (alsa-lib)pcm_hw.c:
SNDRV_PCM_IOCTL_PREPARE failed (-32)
(  10.386|   0.000) I: [pulseaudio] alsa-util.c: snd_pcm_hw_params failed:
Broken pipe
(  10.386|   0.000) D: [pulseaudio] alsa-util.c: Trying plug:hw:1 with
SND_PCM_NO_AUTO_FORMAT ...
(  10.387|   0.000) D: [pulseaudio] alsa-util.c: Managed to open plug:hw:1
(  10.387|   0.000) D: [pulseaudio] alsa-util.c: Maximum hw buffer size is
11888 ms
(  10.388|   0.001) I: [pulseaudio] (alsa-lib)pcm_hw.c:
SNDRV_PCM_IOCTL_PREPARE failed (-32)
(  10.389|   0.000) I: [pulseaudio] (alsa-lib)pcm_hw.c:
SNDRV_PCM_IOCTL_PREPARE failed (-32)
(  10.390|   0.000) I: [pulseaudio] (alsa-lib)pcm_hw.c:
SNDRV_PCM_IOCTL_PREPARE failed (-32)
(  10.391|   0.001) I: [pulseaudio] (alsa-lib)pcm_hw.c:
SNDRV_PCM_IOCTL_PREPARE failed (-32)
(  10.391|   0.000) D: [pulseaudio] alsa-util.c: Set neither period nor
buffer size.
(  10.392|   0.001) I: [pulseaudio] (alsa-lib)pcm_hw.c:
SNDRV_PCM_IOCTL_PREPARE failed (-32)
(  10.392|   0.000) I: [pulseaudio] alsa-util.c: snd_pcm_hw_params failed:
Broken pipe
(  10.392|   0.000) D: [pulseaudio] alsa-util.c: Trying plug:hw:1 without
SND_PCM_NO_AUTO_FORMAT ...
(  10.393|   0.000) D: [pulseaudio] alsa-util.c: Managed to open plug:hw:1
(  10.394|   0.000) D: [pulseaudio] alsa-util.c: Maximum hw buffer size is
11888 ms
(  10.395|   0.001) I: [pulseaudio] (alsa-lib)pcm_hw.c:
SNDRV_PCM_IOCTL_PREPARE failed (-32)
(  10.395|   0.000) I: [pulseaudio] (alsa-lib)pcm_hw.c:
SNDRV_PCM_IOCTL_PREPARE failed (-32)
(  10.396|   0.000) I: [pulseaudio] (alsa-lib)pcm_hw.c:
SNDRV_PCM_IOCTL_PREPARE failed (-32)
(  10.398|   0.001) I: [pulseaudio] (alsa-lib)pcm_hw.c:
SNDRV_PCM_IOCTL_PREPARE failed (-32)
(  10.398|   0.000) D: [pulseaudio] alsa-util.c: Set neither period nor
buffer size.
(  10.399|   0.001) I: [pulseaudio] (alsa-lib)pcm_hw.c:
SNDRV_PCM_IOCTL_PREPARE failed (-32)
(  10.399|   0.000) I: [pulseaudio] alsa-util.c: snd_pcm_hw_params failed:
Broken pipe
(  10.399|   0.000) I: [pulseaudio] alsa-util.c: Failed to set hardware
parameters on plug:hw:1: Broken pipe
(  10.399|   0.000) D: [pulseaudio] alsa-mixer.c: Looking at profile
output:analog-mono+input:analog-4-channel-input
(  10.399|   0.000) D: [pulseaudio] alsa-mixer.c: Checking for playback on
Analog Mono (analog-mono)
(  10.399|   0.000) D: [pulseaudio] alsa-util.c: Trying hw:1 with
SND_PCM_NO_AUTO_FORMAT ...
(  10.400|   0.000) D: [pulseaudio] alsa-util.c: Managed to open hw:1
(  10.400|   0.000) D: [pulseaudio] alsa-util.c: Maximum hw buffer size is
11888 ms
(  10.401|   0.001) I: [pulseaudio] (alsa-lib)pcm_hw.c:
SNDRV_PCM_IOCTL_PREPARE failed (-32)
(  10.402|   0.000) I: [pulseaudio] (alsa-lib)pcm_hw.c:
SNDRV_PCM_IOCTL_PREPARE failed (-32)
(  10.402|   0.000) I: [pulseaudio] (alsa-lib)pcm_hw.c:
SNDRV_PCM_IOCTL_PREPARE failed (-32)
(  10.403|   0.001) I: [pulseaudio] (alsa-lib)pcm_hw.c:
SNDRV_PCM_IOCTL_PREPARE failed (-32)
(  10.404|   0.000) D: [pulseaudio] alsa-util.c: Set neither period nor
buffer size.
(  10.405|   0.001) I: [pulseaudio] (alsa-lib)pcm_hw.c:
SNDRV_PCM_IOCTL_PREPARE failed (-32)
(  10.405|   0.000) I: [pulseaudio] alsa-util.c: snd_pcm_hw_params failed:
Broken pipe
(  10.405|   0.000) D: [pulseaudio] alsa-util.c: Trying hw:1 without
SND_PCM_NO_AUTO_FORMAT ...
(  10.405|   0.000) D: [pulseaudio] alsa-util.c: Managed to open hw:1
(  10.405|   0.000) D: [pulseaudio] alsa-util.c: Maximum hw buffer size is
11888 ms
(  10.406|   0.000) I: [pulseaudio] (alsa-lib)pcm_hw.c:
SNDRV_PCM_IOCTL_PREPARE failed (-32)
(  10.407|   0.000) I: [pulseaudio] (alsa-lib)pcm_hw.c:
SNDRV_PCM_IOCTL_PREPARE failed (-32)
(  10.408|   0.000) I: [pulseaudio] (alsa-lib)pcm_hw.c:
SNDRV_PCM_IOCTL_PREPARE failed (-32)
(  10.409|   0.000) I: [pulseaudio] (alsa-lib)pcm_hw.c:
SNDRV_PCM_IOCTL_PREPARE failed (-32)
(  10.409|   0.000) D: [pulseaudio] alsa-util.c: Set neither period nor
buffer size.
(  10.410|   0.001) I: [pulseaudio] (alsa-lib)pcm_hw.c:
SNDRV_PCM_IOCTL_PREPARE failed (-32)
(  10.410|   0.000) I: [pulseaudio] alsa-util.c: snd_pcm_hw_params failed:
Broken pipe
(  10.410|   0.000) D: [pulseaudio] alsa-util.c: Trying plug:hw:1 with
SND_PCM_NO_AUTO_FORMAT ...
(  10.411|   0.000) D: [pulseaudio] alsa-util.c: Managed to open plug:hw:1
(  10.411|   0.000) D: [pulseaudio] alsa-util.c: Maximum hw buffer size is
11888 ms
(  10.412|   0.001) I: [pulseaudio] (alsa-lib)pcm_hw.c:
SNDRV_PCM_IOCTL_PREPARE failed (-32)
(  10.413|   0.000) I: [pulseaudio] (alsa-lib)pcm_hw.c:
SNDRV_PCM_IOCTL_PREPARE failed (-32)
(  10.414|   0.000) I: [pulseaudio] (alsa-lib)pcm_hw.c:
SNDRV_PCM_IOCTL_PREPARE failed (-32)
(  10.415|   0.001) I: [pulseaudio] (alsa-lib)pcm_hw.c:
SNDRV_PCM_IOCTL_PREPARE failed (-32)
(  10.415|   0.000) D: [pulseaudio] alsa-util.c: Set neither period nor
buffer size.
(  10.416|   0.001) I: [pulseaudio] (alsa-lib)pcm_hw.c:
SNDRV_PCM_IOCTL_PREPARE failed (-32)
(  10.416|   0.000) I: [pulseaudio] alsa-util.c: snd_pcm_hw_params failed:
Broken pipe
(  10.416|   0.000) D: [pulseaudio] alsa-util.c: Trying plug:hw:1 without
SND_PCM_NO_AUTO_FORMAT ...
(  10.417|   0.000) D: [pulseaudio] alsa-util.c: Managed to open plug:hw:1
(  10.418|   0.000) D: [pulseaudio] alsa-util.c: Maximum hw buffer size is
11888 ms
(  10.419|   0.001) I: [pulseaudio] (alsa-lib)pcm_hw.c:
SNDRV_PCM_IOCTL_PREPARE failed (-32)
(  10.419|   0.000) I: [pulseaudio] (alsa-lib)pcm_hw.c:
SNDRV_PCM_IOCTL_PREPARE failed (-32)
(  10.420|   0.000) I: [pulseaudio] (alsa-lib)pcm_hw.c:
SNDRV_PCM_IOCTL_PREPARE failed (-32)
(  10.422|   0.001) I: [pulseaudio] (alsa-lib)pcm_hw.c:
SNDRV_PCM_IOCTL_PREPARE failed (-32)
(  10.422|   0.000) D: [pulseaudio] alsa-util.c: Set neither period nor
buffer size.
(  10.423|   0.001) I: [pulseaudio] (alsa-lib)pcm_hw.c:
SNDRV_PCM_IOCTL_PREPARE failed (-32)
(  10.423|   0.000) I: [pulseaudio] alsa-util.c: snd_pcm_hw_params failed:
Broken pipe
(  10.423|   0.000) I: [pulseaudio] alsa-util.c: Failed to set hardware
parameters on plug:hw:1: Broken pipe
(  10.423|   0.000) D: [pulseaudio] alsa-mixer.c: Looking at profile
output:analog-mono+input:iec958-stereo
(  10.423|   0.000) D: [pulseaudio] alsa-mixer.c: Checking for playback on
Analog Mono (analog-mono)
(  10.423|   0.000) D: [pulseaudio] alsa-util.c: Trying hw:1 with
SND_PCM_NO_AUTO_FORMAT ...
(  10.424|   0.000) D: [pulseaudio] alsa-util.c: Managed to open hw:1
(  10.424|   0.000) D: [pulseaudio] alsa-util.c: Maximum hw buffer size is
11888 ms
(  10.425|   0.000) I: [pulseaudio] (alsa-lib)pcm_hw.c:
SNDRV_PCM_IOCTL_PREPARE failed (-32)
(  10.425|   0.000) I: [pulseaudio] (alsa-lib)pcm_hw.c:
SNDRV_PCM_IOCTL_PREPARE failed (-32)
(  10.426|   0.000) I: [pulseaudio] (alsa-lib)pcm_hw.c:
SNDRV_PCM_IOCTL_PREPARE failed (-32)
(  10.427|   0.001) I: [pulseaudio] (alsa-lib)pcm_hw.c:
SNDRV_PCM_IOCTL_PREPARE failed (-32)
(  10.427|   0.000) D: [pulseaudio] alsa-util.c: Set neither period nor
buffer size.
(  10.428|   0.001) I: [pulseaudio] (alsa-lib)pcm_hw.c:
SNDRV_PCM_IOCTL_PREPARE failed (-32)
(  10.428|   0.000) I: [pulseaudio] alsa-util.c: snd_pcm_hw_params failed:
Broken pipe
(  10.428|   0.000) D: [pulseaudio] alsa-util.c: Trying hw:1 without
SND_PCM_NO_AUTO_FORMAT ...
(  10.429|   0.000) D: [pulseaudio] alsa-util.c: Managed to open hw:1
(  10.429|   0.000) D: [pulseaudio] alsa-util.c: Maximum hw buffer size is
11888 ms
(  10.430|   0.000) I: [pulseaudio] (alsa-lib)pcm_hw.c:
SNDRV_PCM_IOCTL_PREPARE failed (-32)
(  10.430|   0.000) I: [pulseaudio] (alsa-lib)pcm_hw.c:
SNDRV_PCM_IOCTL_PREPARE failed (-32)
(  10.431|   0.000) I: [pulseaudio] (alsa-lib)pcm_hw.c:
SNDRV_PCM_IOCTL_PREPARE failed (-32)
(  10.432|   0.001) I: [pulseaudio] (alsa-lib)pcm_hw.c:
SNDRV_PCM_IOCTL_PREPARE failed (-32)
(  10.432|   0.000) D: [pulseaudio] alsa-util.c: Set neither period nor
buffer size.
(  10.433|   0.001) I: [pulseaudio] (alsa-lib)pcm_hw.c:
SNDRV_PCM_IOCTL_PREPARE failed (-32)
(  10.433|   0.000) I: [pulseaudio] alsa-util.c: snd_pcm_hw_params failed:
Broken pipe
(  10.434|   0.000) D: [pulseaudio] alsa-util.c: Trying plug:hw:1 with
SND_PCM_NO_AUTO_FORMAT ...
(  10.434|   0.000) D: [pulseaudio] alsa-util.c: Managed to open plug:hw:1
(  10.434|   0.000) D: [pulseaudio] alsa-util.c: Maximum hw buffer size is
11888 ms
(  10.435|   0.001) I: [pulseaudio] (alsa-lib)pcm_hw.c:
SNDRV_PCM_IOCTL_PREPARE failed (-32)
(  10.436|   0.000) I: [pulseaudio] (alsa-lib)pcm_hw.c:
SNDRV_PCM_IOCTL_PREPARE failed (-32)
(  10.437|   0.000) I: [pulseaudio] (alsa-lib)pcm_hw.c:
SNDRV_PCM_IOCTL_PREPARE failed (-32)
(  10.438|   0.001) I: [pulseaudio] (alsa-lib)pcm_hw.c:
SNDRV_PCM_IOCTL_PREPARE failed (-32)
(  10.438|   0.000) D: [pulseaudio] alsa-util.c: Set neither period nor
buffer size.
(  10.439|   0.001) I: [pulseaudio] (alsa-lib)pcm_hw.c:
SNDRV_PCM_IOCTL_PREPARE failed (-32)
(  10.439|   0.000) I: [pulseaudio] alsa-util.c: snd_pcm_hw_params failed:
Broken pipe
(  10.440|   0.000) D: [pulseaudio] alsa-util.c: Trying plug:hw:1 without
SND_PCM_NO_AUTO_FORMAT ...
(  10.440|   0.000) D: [pulseaudio] alsa-util.c: Managed to open plug:hw:1
(  10.441|   0.000) D: [pulseaudio] alsa-util.c: Maximum hw buffer size is
11888 ms
(  10.442|   0.001) I: [pulseaudio] (alsa-lib)pcm_hw.c:
SNDRV_PCM_IOCTL_PREPARE failed (-32)
(  10.443|   0.000) I: [pulseaudio] (alsa-lib)pcm_hw.c:
SNDRV_PCM_IOCTL_PREPARE failed (-32)
(  10.444|   0.000) I: [pulseaudio] (alsa-lib)pcm_hw.c:
SNDRV_PCM_IOCTL_PREPARE failed (-32)
(  10.445|   0.001) I: [pulseaudio] (alsa-lib)pcm_hw.c:
SNDRV_PCM_IOCTL_PREPARE failed (-32)
(  10.445|   0.000) D: [pulseaudio] alsa-util.c: Set neither period nor
buffer size.
(  10.446|   0.001) I: [pulseaudio] (alsa-lib)pcm_hw.c:
SNDRV_PCM_IOCTL_PREPARE failed (-32)
(  10.446|   0.000) I: [pulseaudio] alsa-util.c: snd_pcm_hw_params failed:
Broken pipe
(  10.446|   0.000) I: [pulseaudio] alsa-util.c: Failed to set hardware
parameters on plug:hw:1: Broken pipe
(  10.446|   0.000) D: [pulseaudio] alsa-mixer.c: Looking at profile
output:analog-stereo
(  10.446|   0.000) D: [pulseaudio] alsa-mixer.c: Checking for playback on
Analog Stereo (analog-stereo)
(  10.446|   0.000) D: [pulseaudio] alsa-util.c: Trying front:1 with
SND_PCM_NO_AUTO_FORMAT ...
(  10.447|   0.000) I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find
definition 'cards.USB-Audio.pcm.front.0:CARD=1'
(  10.447|   0.000) I: [pulseaudio] (alsa-lib)conf.c: function
snd_func_refer returned error: No such file or directory
(  10.447|   0.000) I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No
such file or directory
(  10.447|   0.000) I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM front:1
(  10.447|   0.000) I: [pulseaudio] alsa-util.c: Error opening PCM device
front:1: No such file or directory
(  10.447|   0.000) D: [pulseaudio] alsa-util.c: Trying hw:1 with
SND_PCM_NO_AUTO_FORMAT ...
(  10.447|   0.000) D: [pulseaudio] alsa-util.c: Managed to open hw:1
(  10.447|   0.000) D: [pulseaudio] alsa-util.c: Maximum hw buffer size is
5944 ms
(  10.448|   0.000) I: [pulseaudio] (alsa-lib)pcm_hw.c:
SNDRV_PCM_IOCTL_PREPARE failed (-32)
(  10.449|   0.000) I: [pulseaudio] (alsa-lib)pcm_hw.c:
SNDRV_PCM_IOCTL_PREPARE failed (-32)
(  10.450|   0.000) I: [pulseaudio] (alsa-lib)pcm_hw.c:
SNDRV_PCM_IOCTL_PREPARE failed (-32)
(  10.451|   0.001) I: [pulseaudio] (alsa-lib)pcm_hw.c:
SNDRV_PCM_IOCTL_PREPARE failed (-32)
(  10.451|   0.000) D: [pulseaudio] alsa-util.c: Set neither period nor
buffer size.
(  10.452|   0.001) I: [pulseaudio] (alsa-lib)pcm_hw.c:
SNDRV_PCM_IOCTL_PREPARE failed (-32)
(  10.452|   0.000) I: [pulseaudio] alsa-util.c: snd_pcm_hw_params failed:
Broken pipe
(  10.452|   0.000) D: [pulseaudio] alsa-util.c: Trying hw:1 without
SND_PCM_NO_AUTO_FORMAT ...
(  10.453|   0.000) D: [pulseaudio] alsa-util.c: Managed to open hw:1
(  10.453|   0.000) D: [pulseaudio] alsa-util.c: Maximum hw buffer size is
5944 ms
(  10.454|   0.000) I: [pulseaudio] (alsa-lib)pcm_hw.c:
SNDRV_PCM_IOCTL_PREPARE failed (-32)
(  10.454|   0.000) I: [pulseaudio] (alsa-lib)pcm_hw.c:
SNDRV_PCM_IOCTL_PREPARE failed (-32)
(  10.455|   0.000) I: [pulseaudio] (alsa-lib)pcm_hw.c:
SNDRV_PCM_IOCTL_PREPARE failed (-32)
(  10.456|   0.001) I: [pulseaudio] (alsa-lib)pcm_hw.c:
SNDRV_PCM_IOCTL_PREPARE failed (-32)
(  10.456|   0.000) D: [pulseaudio] alsa-util.c: Set neither period nor
buffer size.
(  10.457|   0.001) I: [pulseaudio] (alsa-lib)pcm_hw.c:
SNDRV_PCM_IOCTL_PREPARE failed (-32)
(  10.457|   0.000) I: [pulseaudio] alsa-util.c: snd_pcm_hw_params failed:
Broken pipe
(  10.458|   0.000) D: [pulseaudio] alsa-util.c: Trying plug:hw:1 with
SND_PCM_NO_AUTO_FORMAT ...
(  10.458|   0.000) D: [pulseaudio] alsa-util.c: Managed to open plug:hw:1
(  10.458|   0.000) D: [pulseaudio] alsa-util.c: Maximum hw buffer size is
5944 ms
(  10.460|   0.001) I: [pulseaudio] (alsa-lib)pcm_hw.c:
SNDRV_PCM_IOCTL_PREPARE failed (-32)
(  10.460|   0.000) I: [pulseaudio] (alsa-lib)pcm_hw.c:
SNDRV_PCM_IOCTL_PREPARE failed (-32)
(  10.461|   0.001) I: [pulseaudio] (alsa-lib)pcm_hw.c:
SNDRV_PCM_IOCTL_PREPARE failed (-32)
(  10.463|   0.001) I: [pulseaudio] (alsa-lib)pcm_hw.c:
SNDRV_PCM_IOCTL_PREPARE failed (-32)
(  10.463|   0.000) D: [pulseaudio] alsa-util.c: Set neither period nor
buffer size.
(  10.464|   0.001) I: [pulseaudio] (alsa-lib)pcm_hw.c:
SNDRV_PCM_IOCTL_PREPARE failed (-32)
(  10.464|   0.000) I: [pulseaudio] alsa-util.c: snd_pcm_hw_params failed:
Broken pipe
(  10.464|   0.000) D: [pulseaudio] alsa-util.c: Trying plug:hw:1 without
SND_PCM_NO_AUTO_FORMAT ...
(  10.465|   0.000) D: [pulseaudio] alsa-util.c: Managed to open plug:hw:1
(  10.466|   0.000) D: [pulseaudio] alsa-util.c: Maximum hw buffer size is
5944 ms
(  10.467|   0.001) I: [pulseaudio] (alsa-lib)pcm_hw.c:
SNDRV_PCM_IOCTL_PREPARE failed (-32)
(  10.468|   0.000) I: [pulseaudio] (alsa-lib)pcm_hw.c:
SNDRV_PCM_IOCTL_PREPARE failed (-32)
(  10.469|   0.000) I: [pulseaudio] (alsa-lib)pcm_hw.c:
SNDRV_PCM_IOCTL_PREPARE failed (-32)
(  10.470|   0.001) I: [pulseaudio] (alsa-lib)pcm_hw.c:
SNDRV_PCM_IOCTL_PREPARE failed (-32)
(  10.470|   0.000) D: [pulseaudio] alsa-util.c: Set neither period nor
buffer size.
(  10.471|   0.001) I: [pulseaudio] (alsa-lib)pcm_hw.c:
SNDRV_PCM_IOCTL_PREPARE failed (-32)
(  10.471|   0.000) I: [pulseaudio] alsa-util.c: snd_pcm_hw_params failed:
Broken pipe
(  10.471|   0.000) I: [pulseaudio] alsa-util.c: Failed to set hardware
parameters on plug:hw:1: Broken pipe

>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freedesktop.org/archives/pulseaudio-discuss/attachments/20121028/f9fa1bb7/attachment-0001.html>