[pulseaudio-discuss] Issue with multiple hdmi codecs in radeonhd, hacked to work
John Ettedgui
john.ettedgui at gmail.com
Mon Dec 9 01:15:50 PST 2013
On Sun, Dec 8, 2013 at 10:08 PM, Anssi Hannula <anssi.hannula at iki.fi> wrote:
>
> > ATI/AMD does not internally use ELD but analogous custom stuff. But as
> > noted, the HDA driver on this kernel does not support reading it, it is
> > a 3.12+ feature (though note that writing the info is disabled in 3.12
> > radeon video driver on some cards).
>
> A typo here, AMD stuff is a 3.13+ feature.
>
> New logs.
I hope this time I got it right:
zcat /proc/config.gz :
CONFIG_SND_DEBUG=y
CONFIG_SND_DEBUG_VERBOSE=y
CONFIG_SND_PCM_XRUN_DEBUG=y
CONFIG_SND_DYNAMIC_MINORS=y
Sorry about the previous ones.
Thanks,
John
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freedesktop.org/archives/pulseaudio-discuss/attachments/20131209/030a4829/attachment-0001.html>
-------------- next part --------------
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.13.0-1-mainline (root at HTPC) (gcc version 4.8.2 (GCC) ) #1 SMP PREEMPT Sun Dec 8 23:43:48 PST 2013
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux-mainline root=LABEL=ROOT rw rootfstype=btrfs raid=noautodetect intel_iommu=on radeon.audio=1 radeon.dpm=1 quiet add_efi_memmap clocksource=hpet hpet=enable splash
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000df7dffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000df7e0000-0x00000000df7e1fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000df7e2000-0x00000000df7effff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000df7f0000-0x00000000df7fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f4000000-0x00000000f7ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000041fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.4 present.
[ 0.000000] DMI: Gigabyte Technology Co., Ltd. P55-UD3R/P55-UD3R, BIOS F8 06/23/2010
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x420000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-through
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F00000000 write-back
[ 0.000000] 1 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 2 base 100000000 mask F00000000 write-back
[ 0.000000] 3 base 200000000 mask E00000000 write-back
[ 0.000000] 4 base 300000000 mask F00000000 write-back
[ 0.000000] 5 base 400000000 mask FE0000000 write-back
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xdf7e0 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000f57d0-0x000f57df] mapped at [ffff8800000f57d0]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01b3c000, 0x01b3cfff] PGTABLE
[ 0.000000] BRK [0x01b3d000, 0x01b3dfff] PGTABLE
[ 0.000000] BRK [0x01b3e000, 0x01b3efff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x41fe00000-0x41fffffff]
[ 0.000000] [mem 0x41fe00000-0x41fffffff] page 2M
[ 0.000000] BRK [0x01b3f000, 0x01b3ffff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x41c000000-0x41fdfffff]
[ 0.000000] [mem 0x41c000000-0x41fdfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x400000000-0x41bffffff]
[ 0.000000] [mem 0x400000000-0x41bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xdf7dffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0xdf5fffff] page 2M
[ 0.000000] [mem 0xdf600000-0xdf7dffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x3ffffffff]
[ 0.000000] [mem 0x100000000-0x3ffffffff] page 2M
[ 0.000000] BRK [0x01b40000, 0x01b40fff] PGTABLE
[ 0.000000] BRK [0x01b41000, 0x01b41fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x37500000-0x37a77fff]
[ 0.000000] ACPI: RSDP 00000000000f7190 000014 (v00 GBT )
[ 0.000000] ACPI: RSDT 00000000df7e2040 000040 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: FACP 00000000df7e20c0 000074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: DSDT 00000000df7e2180 006278 (v01 GBT GBTUACPI 00001000 MSFT 0100000C)
[ 0.000000] ACPI: FACS 00000000df7e0000 000040
[ 0.000000] ACPI: HPET 00000000df7e8540 000038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
[ 0.000000] ACPI: MCFG 00000000df7e85c0 00003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: EUDS 00000000df7e8600 000560 (v01 GBT 00000000 00000000)
[ 0.000000] ACPI: TAMG 00000000df7e8b60 000A32 (v01 GBT GBT B0 5455312E BG?? 53450101)
[ 0.000000] ACPI: APIC 00000000df7e8440 0000BC (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: SSDT 00000000df7e95c0 001778 (v01 INTEL PPM RCM 80000001 INTL 20061109)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000041fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x41fffffff]
[ 0.000000] NODE_DATA [mem 0x41ffed000-0x41fff1fff]
[ 0.000000] [ffffea0000000000-ffffea00107fffff] PMD -> [ffff88040f600000-ffff88041f5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x41fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009cfff]
[ 0.000000] node 0: [mem 0x00100000-0xdf7dffff]
[ 0.000000] node 0: [mem 0x100000000-0x41fffffff]
[ 0.000000] On node 0 totalpages: 4192124
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14240 pages used for memmap
[ 0.000000] DMA32 zone: 911328 pages, LIFO batch:31
[ 0.000000] Normal zone: 51200 pages used for memmap
[ 0.000000] Normal zone: 3276800 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdf7e0000-0xdf7e1fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdf7e2000-0xdf7effff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdf7f0000-0xdf7fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdf800000-0xf3ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf4000000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xffffffff]
[ 0.000000] e820: [mem 0xdf800000-0xf3ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88041fc00000 s86272 r8192 d24320 u262144
[ 0.000000] pcpu-alloc: s86272 r8192 d24320 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4126599
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux-mainline root=LABEL=ROOT rw rootfstype=btrfs raid=noautodetect intel_iommu=on radeon.audio=1 radeon.dpm=1 quiet add_efi_memmap clocksource=hpet hpet=enable splash
[ 0.000000] Intel-IOMMU: enabled
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 16421832K/16768496K available (5151K kernel code, 815K rwdata, 1728K rodata, 1160K init, 1304K bss, 346664K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
[ 0.000000] NR_IRQS:8448 nr_irqs:744 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 67108864 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.003333] tsc: Detected 2719.921 MHz processor
[ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 5442.50 BogoMIPS (lpj=9066403)
[ 0.000004] pid_max: default: 32768 minimum: 301
[ 0.000028] Security Framework initialized
[ 0.000035] AppArmor: AppArmor disabled by boot time parameter
[ 0.000036] Yama: becoming mindful.
[ 0.001003] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.003917] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.005457] Mount-cache hash table entries: 256
[ 0.005619] Initializing cgroup subsys memory
[ 0.005624] Initializing cgroup subsys devices
[ 0.005626] Initializing cgroup subsys freezer
[ 0.005627] Initializing cgroup subsys net_cls
[ 0.005629] Initializing cgroup subsys blkio
[ 0.005645] CPU: Physical Processor ID: 0
[ 0.005646] CPU: Processor Core ID: 0
[ 0.005650] mce: CPU supports 9 MCE banks
[ 0.005658] CPU0: Thermal monitoring enabled (TM1)
[ 0.005666] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift: 6
[ 0.005731] Freeing SMP alternatives memory: 20K (ffffffff819ef000 - ffffffff819f4000)
[ 0.006626] ACPI: Core revision 20131115
[ 0.008773] ACPI: All ACPI Tables successfully acquired
[ 0.011212] ftrace: allocating 20458 entries in 80 pages
[ 0.020368] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.053329] smpboot: CPU0: Intel(R) Core(TM) i5 CPU 750 @ 2.67GHz (fam: 06, model: 1e, stepping: 05)
[ 0.157891] Performance Events: PEBS fmt1+, 16-deep LBR, Nehalem events, Intel PMU driver.
[ 0.157896] perf_event_intel: CPU erratum AAJ80 worked around
[ 0.157897] perf_event_intel: CPUID marked event: 'bus cycles' unavailable
[ 0.157899] ... version: 3
[ 0.157900] ... bit width: 48
[ 0.157900] ... generic registers: 4
[ 0.157901] ... value mask: 0000ffffffffffff
[ 0.157902] ... max period: 000000007fffffff
[ 0.157903] ... fixed-purpose events: 3
[ 0.157904] ... event mask: 000000070000000f
[ 0.184594] x86: Booting SMP configuration:
[ 0.197893] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.184596] .... node #0, CPUs: #1 #2 #3
[ 0.237788] x86: Booted up 1 node, 4 CPUs
[ 0.237791] smpboot: Total of 4 processors activated (21768.00 BogoMIPS)
[ 0.240249] devtmpfs: initialized
[ 0.243925] PM: Registering ACPI NVS region [mem 0xdf7e0000-0xdf7e1fff] (8192 bytes)
[ 0.244730] RTC time: 9:06:49, date: 12/09/13
[ 0.244762] NET: Registered protocol family 16
[ 0.244861] cpuidle: using governor ladder
[ 0.244863] cpuidle: using governor menu
[ 0.244889] ACPI: bus type PCI registered
[ 0.244891] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.244945] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf4000000-0xf7ffffff] (base 0xf4000000)
[ 0.244947] PCI: MMCONFIG at [mem 0xf4000000-0xf7ffffff] reserved in E820
[ 0.248211] PCI: Using configuration type 1 for base access
[ 0.248841] bio: create slab <bio-0> at 0
[ 0.248927] ACPI: Added _OSI(Module Device)
[ 0.248928] ACPI: Added _OSI(Processor Device)
[ 0.248929] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.248930] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.252160] ACPI BIOS Warning (bug): Incorrect checksum in table [TAMG] - 0xE1, should be 0xE0 (20131115/tbprint-214)
[ 0.252633] ACPI: Interpreter enabled
[ 0.252638] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
[ 0.252641] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
[ 0.252651] ACPI: (supports S0 S3 S4 S5)
[ 0.252653] ACPI: Using IOAPIC for interrupt routing
[ 0.252668] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.252762] ACPI: No dock devices found.
[ 0.257128] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
[ 0.257133] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.257139] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.257333] ACPI: \_SB_.PCI0.LNKA: can't evaluate _ADR (0x5)
[ 0.257335] ACPI: \_SB_.PCI0.LNKB: can't evaluate _ADR (0x5)
[ 0.257337] ACPI: \_SB_.PCI0.LNKC: can't evaluate _ADR (0x5)
[ 0.257339] ACPI: \_SB_.PCI0.LNKD: can't evaluate _ADR (0x5)
[ 0.257340] ACPI: \_SB_.PCI0.LNKE: can't evaluate _ADR (0x5)
[ 0.257342] ACPI: \_SB_.PCI0.LNKF: can't evaluate _ADR (0x5)
[ 0.257343] ACPI: \_SB_.PCI0.LNK0: can't evaluate _ADR (0x5)
[ 0.257345] ACPI: \_SB_.PCI0.LNK1: can't evaluate _ADR (0x5)
[ 0.257347] ACPI: \_SB_.PCI0.EXPL: can't evaluate _ADR (0x5)
[ 0.257348] PCI host bridge to bus 0000:00
[ 0.257350] pci_bus 0000:00: root bus resource [bus 00-3f]
[ 0.257352] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.257353] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.257355] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.257356] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
[ 0.257358] pci_bus 0000:00: root bus resource [mem 0xdf800000-0xfebfffff]
[ 0.257366] pci 0000:00:00.0: [8086:d131] type 00 class 0x060000
[ 0.257454] pci 0000:00:03.0: [8086:d138] type 01 class 0x060400
[ 0.257495] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 0.257558] pci 0000:00:08.0: [8086:d155] type 00 class 0x088000
[ 0.257641] pci 0000:00:08.1: [8086:d156] type 00 class 0x088000
[ 0.257723] pci 0000:00:08.2: [8086:d157] type 00 class 0x088000
[ 0.257807] pci 0000:00:08.3: [8086:d158] type 00 class 0x088000
[ 0.257884] pci 0000:00:10.0: [8086:d150] type 00 class 0x088000
[ 0.257955] pci 0000:00:10.1: [8086:d151] type 00 class 0x088000
[ 0.258041] pci 0000:00:1a.0: [8086:3b3b] type 00 class 0x0c0300
[ 0.258079] pci 0000:00:1a.0: reg 0x20: [io 0xff00-0xff1f]
[ 0.258147] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.258177] pci 0000:00:1a.1: [8086:3b3e] type 00 class 0x0c0300
[ 0.258215] pci 0000:00:1a.1: reg 0x20: [io 0xfe00-0xfe1f]
[ 0.258282] pci 0000:00:1a.1: System wakeup disabled by ACPI
[ 0.258311] pci 0000:00:1a.2: [8086:3b3f] type 00 class 0x0c0300
[ 0.258348] pci 0000:00:1a.2: reg 0x20: [io 0xfd00-0xfd1f]
[ 0.258415] pci 0000:00:1a.2: System wakeup disabled by ACPI
[ 0.258452] pci 0000:00:1a.7: [8086:3b3c] type 00 class 0x0c0320
[ 0.258470] pci 0000:00:1a.7: reg 0x10: [mem 0xfbfff000-0xfbfff3ff]
[ 0.258551] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.258592] pci 0000:00:1a.7: System wakeup disabled by ACPI
[ 0.258622] pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
[ 0.258682] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.258725] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.258755] pci 0000:00:1c.1: [8086:3b44] type 01 class 0x060400
[ 0.258815] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.258857] pci 0000:00:1c.1: System wakeup disabled by ACPI
[ 0.258887] pci 0000:00:1c.3: [8086:3b48] type 01 class 0x060400
[ 0.258947] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.258990] pci 0000:00:1c.3: System wakeup disabled by ACPI
[ 0.259022] pci 0000:00:1d.0: [8086:3b36] type 00 class 0x0c0300
[ 0.259059] pci 0000:00:1d.0: reg 0x20: [io 0xfc00-0xfc1f]
[ 0.259127] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.259157] pci 0000:00:1d.1: [8086:3b37] type 00 class 0x0c0300
[ 0.259195] pci 0000:00:1d.1: reg 0x20: [io 0xfb00-0xfb1f]
[ 0.259262] pci 0000:00:1d.1: System wakeup disabled by ACPI
[ 0.259292] pci 0000:00:1d.2: [8086:3b38] type 00 class 0x0c0300
[ 0.259330] pci 0000:00:1d.2: reg 0x20: [io 0xfa00-0xfa1f]
[ 0.259397] pci 0000:00:1d.2: System wakeup disabled by ACPI
[ 0.259425] pci 0000:00:1d.3: [8086:3b39] type 00 class 0x0c0300
[ 0.259462] pci 0000:00:1d.3: reg 0x20: [io 0xf900-0xf91f]
[ 0.259529] pci 0000:00:1d.3: System wakeup disabled by ACPI
[ 0.259564] pci 0000:00:1d.7: [8086:3b34] type 00 class 0x0c0320
[ 0.259583] pci 0000:00:1d.7: reg 0x10: [mem 0xfbffe000-0xfbffe3ff]
[ 0.259663] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.259705] pci 0000:00:1d.7: System wakeup disabled by ACPI
[ 0.259732] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[ 0.259808] pci 0000:00:1e.0: System wakeup disabled by ACPI
[ 0.259839] pci 0000:00:1f.0: [8086:3b02] type 00 class 0x060100
[ 0.259995] pci 0000:00:1f.2: [8086:3b22] type 00 class 0x010601
[ 0.260011] pci 0000:00:1f.2: reg 0x10: [io 0xf800-0xf807]
[ 0.260018] pci 0000:00:1f.2: reg 0x14: [io 0xf700-0xf703]
[ 0.260025] pci 0000:00:1f.2: reg 0x18: [io 0xf600-0xf607]
[ 0.260032] pci 0000:00:1f.2: reg 0x1c: [io 0xf500-0xf503]
[ 0.260039] pci 0000:00:1f.2: reg 0x20: [io 0xf400-0xf41f]
[ 0.260046] pci 0000:00:1f.2: reg 0x24: [mem 0xfbffd000-0xfbffd7ff]
[ 0.260086] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.260149] pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500
[ 0.260162] pci 0000:00:1f.3: reg 0x10: [mem 0xfbffc000-0xfbffc0ff 64bit]
[ 0.260181] pci 0000:00:1f.3: reg 0x20: [io 0x0500-0x051f]
[ 0.260286] pci 0000:01:00.0: [1002:6818] type 00 class 0x030000
[ 0.260297] pci 0000:01:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.260306] pci 0000:01:00.0: reg 0x18: [mem 0xfbc80000-0xfbcbffff 64bit]
[ 0.260312] pci 0000:01:00.0: reg 0x20: [io 0xce00-0xceff]
[ 0.260323] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[ 0.260356] pci 0000:01:00.0: supports D1 D2
[ 0.260357] pci 0000:01:00.0: PME# supported from D1 D2 D3hot
[ 0.260403] pci 0000:01:00.1: [1002:aab0] type 00 class 0x040300
[ 0.260414] pci 0000:01:00.1: reg 0x10: [mem 0xfbcfc000-0xfbcfffff 64bit]
[ 0.260468] pci 0000:01:00.1: supports D1 D2
[ 0.264462] pci 0000:00:03.0: PCI bridge to [bus 01]
[ 0.264465] pci 0000:00:03.0: bridge window [io 0xc000-0xcfff]
[ 0.264468] pci 0000:00:03.0: bridge window [mem 0xfbc00000-0xfbcfffff]
[ 0.264471] pci 0000:00:03.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.264549] pci 0000:02:00.0: [197b:2363] type 00 class 0x010185
[ 0.264632] pci 0000:02:00.0: reg 0x24: [mem 0xfbafe000-0xfbafffff]
[ 0.264692] pci 0000:02:00.0: PME# supported from D3hot
[ 0.264747] pci 0000:02:00.1: [197b:2363] type 00 class 0x010185
[ 0.264767] pci 0000:02:00.1: reg 0x10: [io 0xbf00-0xbf07]
[ 0.264776] pci 0000:02:00.1: reg 0x14: [io 0xbe00-0xbe03]
[ 0.264786] pci 0000:02:00.1: reg 0x18: [io 0xbd00-0xbd07]
[ 0.264795] pci 0000:02:00.1: reg 0x1c: [io 0xbc00-0xbc03]
[ 0.264805] pci 0000:02:00.1: reg 0x20: [io 0xbb00-0xbb0f]
[ 0.264898] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.264907] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.264910] pci 0000:00:1c.0: bridge window [io 0xb000-0xbfff]
[ 0.264913] pci 0000:00:1c.0: bridge window [mem 0xfba00000-0xfbafffff]
[ 0.264976] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[ 0.264992] pci 0000:03:00.0: reg 0x10: [io 0xee00-0xeeff]
[ 0.265018] pci 0000:03:00.0: reg 0x18: [mem 0xfbeff000-0xfbefffff 64bit pref]
[ 0.265035] pci 0000:03:00.0: reg 0x20: [mem 0xfbef8000-0xfbefbfff 64bit pref]
[ 0.265046] pci 0000:03:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[ 0.265107] pci 0000:03:00.0: supports D1 D2
[ 0.265108] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.271125] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.271131] pci 0000:00:1c.1: bridge window [io 0xe000-0xefff]
[ 0.271136] pci 0000:00:1c.1: bridge window [mem 0xfb900000-0xfb9fffff]
[ 0.271143] pci 0000:00:1c.1: bridge window [mem 0xfbe00000-0xfbefffff 64bit pref]
[ 0.271229] pci 0000:04:00.0: [197b:2363] type 00 class 0x010185
[ 0.271312] pci 0000:04:00.0: reg 0x24: [mem 0xfbdfe000-0xfbdfffff]
[ 0.271371] pci 0000:04:00.0: PME# supported from D3hot
[ 0.271428] pci 0000:04:00.1: [197b:2363] type 00 class 0x010185
[ 0.271447] pci 0000:04:00.1: reg 0x10: [io 0xdf00-0xdf07]
[ 0.271457] pci 0000:04:00.1: reg 0x14: [io 0xde00-0xde03]
[ 0.271467] pci 0000:04:00.1: reg 0x18: [io 0xdd00-0xdd07]
[ 0.271476] pci 0000:04:00.1: reg 0x1c: [io 0xdc00-0xdc03]
[ 0.271486] pci 0000:04:00.1: reg 0x20: [io 0xdb00-0xdb0f]
[ 0.271579] pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.271587] pci 0000:00:1c.3: PCI bridge to [bus 04]
[ 0.271591] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
[ 0.271594] pci 0000:00:1c.3: bridge window [mem 0xfbd00000-0xfbdfffff]
[ 0.271639] pci 0000:05:05.0: [168c:0023] type 00 class 0x028000
[ 0.271657] pci 0000:05:05.0: reg 0x10: [mem 0xfbbf0000-0xfbbfffff]
[ 0.271789] pci 0000:00:1e.0: PCI bridge to [bus 05] (subtractive decode)
[ 0.271794] pci 0000:00:1e.0: bridge window [mem 0xfbb00000-0xfbbfffff]
[ 0.271798] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.271800] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.271802] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.271803] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[ 0.271805] pci 0000:00:1e.0: bridge window [mem 0xdf800000-0xfebfffff] (subtractive decode)
[ 0.272269] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 0.272314] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 *12 14 15)
[ 0.272358] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
[ 0.272402] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 0.272445] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.272490] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[ 0.272533] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.272577] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[ 0.272649] ACPI: \_SB_.PCI0: notify handler is installed
[ 0.272681] Found 1 acpi root devices
[ 0.272740] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.272742] vgaarb: loaded
[ 0.272743] vgaarb: bridge control possible 0000:01:00.0
[ 0.272769] PCI: Using ACPI for IRQ routing
[ 0.274030] PCI: Discovered peer bus 3f
[ 0.274031] PCI: root bus 3f: using default resources
[ 0.274032] PCI: Probing PCI hardware (bus 3f)
[ 0.274051] PCI host bridge to bus 0000:3f
[ 0.274053] pci_bus 0000:3f: root bus resource [io 0x0000-0xffff]
[ 0.274054] pci_bus 0000:3f: root bus resource [mem 0x00000000-0xfffffffff]
[ 0.274056] pci_bus 0000:3f: No busn resource found for root bus, will use [bus 3f-ff]
[ 0.274058] pci_bus 0000:3f: busn_res: can not insert [bus 3f-ff] under domain [bus 00-ff] (conflicts with (null) [bus 00-3f])
[ 0.274062] pci 0000:3f:00.0: [8086:2c51] type 00 class 0x060000
[ 0.274096] pci 0000:3f:00.1: [8086:2c81] type 00 class 0x060000
[ 0.274130] pci 0000:3f:02.0: [8086:2c90] type 00 class 0x060000
[ 0.274163] pci 0000:3f:02.1: [8086:2c91] type 00 class 0x060000
[ 0.274195] pci 0000:3f:03.0: [8086:2c98] type 00 class 0x060000
[ 0.274226] pci 0000:3f:03.1: [8086:2c99] type 00 class 0x060000
[ 0.274258] pci 0000:3f:03.4: [8086:2c9c] type 00 class 0x060000
[ 0.274288] pci 0000:3f:04.0: [8086:2ca0] type 00 class 0x060000
[ 0.274318] pci 0000:3f:04.1: [8086:2ca1] type 00 class 0x060000
[ 0.274351] pci 0000:3f:04.2: [8086:2ca2] type 00 class 0x060000
[ 0.274381] pci 0000:3f:04.3: [8086:2ca3] type 00 class 0x060000
[ 0.274413] pci 0000:3f:05.0: [8086:2ca8] type 00 class 0x060000
[ 0.274447] pci 0000:3f:05.1: [8086:2ca9] type 00 class 0x060000
[ 0.274477] pci 0000:3f:05.2: [8086:2caa] type 00 class 0x060000
[ 0.274509] pci 0000:3f:05.3: [8086:2cab] type 00 class 0x060000
[ 0.274549] pci_bus 0000:3f: busn_res: [bus 3f-ff] end is updated to 3f
[ 0.274553] PCI: pci_cache_line_size set to 64 bytes
[ 0.274628] e820: reserve RAM buffer [mem 0x0009dc00-0x0009ffff]
[ 0.274630] e820: reserve RAM buffer [mem 0xdf7e0000-0xdfffffff]
[ 0.274698] NetLabel: Initializing
[ 0.274699] NetLabel: domain hash size = 128
[ 0.274700] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.274711] NetLabel: unlabeled traffic allowed by default
[ 0.274758] HPET: 8 timers in total, 5 timers will be used for per-cpu timer
[ 0.274764] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 40, 41, 42, 43, 44, 0
[ 0.274768] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.276800] hpet: hpet2 irq 40 for MSI
[ 0.276836] hpet: hpet3 irq 41 for MSI
[ 0.276875] hpet: hpet4 irq 42 for MSI
[ 0.276914] hpet: hpet5 irq 43 for MSI
[ 0.276936] Switched to clocksource hpet
[ 0.280475] pnp: PnP ACPI init
[ 0.280487] ACPI: bus type PNP registered
[ 0.280616] system 00:00: [io 0x04d0-0x04d1] has been reserved
[ 0.280618] system 00:00: [io 0x0290-0x029f] has been reserved
[ 0.280620] system 00:00: [io 0x0800-0x087f] has been reserved
[ 0.280622] system 00:00: [io 0x0290-0x0294] has been reserved
[ 0.280623] system 00:00: [io 0x0880-0x088f] has been reserved
[ 0.280626] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.280635] pnp 00:01: [dma 4]
[ 0.280652] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.280706] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.280740] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.280759] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.280782] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.280992] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.281156] pnp 00:07: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.281264] system 00:08: [io 0x0400-0x047f] could not be reserved
[ 0.281267] system 00:08: [io 0x0580-0x05ff] has been reserved
[ 0.281269] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.281425] system 00:09: [mem 0xf4000000-0xf7ffffff] has been reserved
[ 0.281428] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.281563] system 00:0a: [mem 0x000f0000-0x000f3fff] could not be reserved
[ 0.281565] system 00:0a: [mem 0x000f4000-0x000f7fff] could not be reserved
[ 0.281567] system 00:0a: [mem 0x000f8000-0x000fbfff] could not be reserved
[ 0.281569] system 00:0a: [mem 0x000fc000-0x000fffff] could not be reserved
[ 0.281571] system 00:0a: [mem 0xdf7e0000-0xdf7effff] could not be reserved
[ 0.281572] system 00:0a: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.281574] system 00:0a: [mem 0x00100000-0xdf7dffff] could not be reserved
[ 0.281576] system 00:0a: [mem 0xdf7f0000-0xdf7fffff] has been reserved
[ 0.281578] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.281580] system 00:0a: [mem 0xfed10000-0xfed1dfff] has been reserved
[ 0.281581] system 00:0a: [mem 0xfed20000-0xfed8ffff] has been reserved
[ 0.281583] system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.281585] system 00:0a: [mem 0xffb00000-0xffb7ffff] has been reserved
[ 0.281586] system 00:0a: [mem 0xfff00000-0xffffffff] has been reserved
[ 0.281588] system 00:0a: [mem 0x000e0000-0x000effff] has been reserved
[ 0.281591] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.281620] pnp 00:0b: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.281624] pnp: PnP ACPI: found 12 devices
[ 0.281625] ACPI: bus type PNP unregistered
[ 0.287948] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
[ 0.287961] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000
[ 0.287972] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.287974] pci 0000:00:1c.3: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.287978] pci 0000:00:1c.0: BAR 15: assigned [mem 0xdf800000-0xdf9fffff 64bit pref]
[ 0.287980] pci 0000:00:1c.3: BAR 15: assigned [mem 0xdfa00000-0xdfbfffff 64bit pref]
[ 0.287983] pci 0000:01:00.0: BAR 6: assigned [mem 0xfbc00000-0xfbc1ffff pref]
[ 0.287985] pci 0000:00:03.0: PCI bridge to [bus 01]
[ 0.287987] pci 0000:00:03.0: bridge window [io 0xc000-0xcfff]
[ 0.287990] pci 0000:00:03.0: bridge window [mem 0xfbc00000-0xfbcfffff]
[ 0.287993] pci 0000:00:03.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.287997] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.287999] pci 0000:00:1c.0: bridge window [io 0xb000-0xbfff]
[ 0.288003] pci 0000:00:1c.0: bridge window [mem 0xfba00000-0xfbafffff]
[ 0.288006] pci 0000:00:1c.0: bridge window [mem 0xdf800000-0xdf9fffff 64bit pref]
[ 0.288011] pci 0000:03:00.0: BAR 6: assigned [mem 0xfbe00000-0xfbe1ffff pref]
[ 0.288013] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.288015] pci 0000:00:1c.1: bridge window [io 0xe000-0xefff]
[ 0.288019] pci 0000:00:1c.1: bridge window [mem 0xfb900000-0xfb9fffff]
[ 0.288022] pci 0000:00:1c.1: bridge window [mem 0xfbe00000-0xfbefffff 64bit pref]
[ 0.288027] pci 0000:00:1c.3: PCI bridge to [bus 04]
[ 0.288029] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
[ 0.288033] pci 0000:00:1c.3: bridge window [mem 0xfbd00000-0xfbdfffff]
[ 0.288036] pci 0000:00:1c.3: bridge window [mem 0xdfa00000-0xdfbfffff 64bit pref]
[ 0.288040] pci 0000:00:1e.0: PCI bridge to [bus 05]
[ 0.288044] pci 0000:00:1e.0: bridge window [mem 0xfbb00000-0xfbbfffff]
[ 0.288051] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.288053] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.288054] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.288056] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.288057] pci_bus 0000:00: resource 8 [mem 0xdf800000-0xfebfffff]
[ 0.288059] pci_bus 0000:01: resource 0 [io 0xc000-0xcfff]
[ 0.288060] pci_bus 0000:01: resource 1 [mem 0xfbc00000-0xfbcfffff]
[ 0.288062] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.288064] pci_bus 0000:02: resource 0 [io 0xb000-0xbfff]
[ 0.288065] pci_bus 0000:02: resource 1 [mem 0xfba00000-0xfbafffff]
[ 0.288067] pci_bus 0000:02: resource 2 [mem 0xdf800000-0xdf9fffff 64bit pref]
[ 0.288068] pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
[ 0.288070] pci_bus 0000:03: resource 1 [mem 0xfb900000-0xfb9fffff]
[ 0.288071] pci_bus 0000:03: resource 2 [mem 0xfbe00000-0xfbefffff 64bit pref]
[ 0.288073] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff]
[ 0.288074] pci_bus 0000:04: resource 1 [mem 0xfbd00000-0xfbdfffff]
[ 0.288076] pci_bus 0000:04: resource 2 [mem 0xdfa00000-0xdfbfffff 64bit pref]
[ 0.288078] pci_bus 0000:05: resource 1 [mem 0xfbb00000-0xfbbfffff]
[ 0.288079] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7]
[ 0.288081] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff]
[ 0.288082] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.288084] pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.288085] pci_bus 0000:05: resource 8 [mem 0xdf800000-0xfebfffff]
[ 0.288088] pci_bus 0000:3f: resource 4 [io 0x0000-0xffff]
[ 0.288089] pci_bus 0000:3f: resource 5 [mem 0x00000000-0xfffffffff]
[ 0.288113] NET: Registered protocol family 2
[ 0.288272] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.288622] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.288895] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.288914] TCP: reno registered
[ 0.288931] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.289043] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.289190] NET: Registered protocol family 1
[ 0.313671] pci 0000:01:00.0: Boot video device
[ 0.313703] PCI: CLS 64 bytes, default 64
[ 0.313739] Unpacking initramfs...
[ 0.333899] Freeing initrd memory: 5600K (ffff880037500000 - ffff880037a78000)
[ 0.333902] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.333905] software IO TLB [mem 0xdb7e0000-0xdf7e0000] (64MB) mapped at [ffff8800db7e0000-ffff8800df7dffff]
[ 0.334066] Scanning for low memory corruption every 60 seconds
[ 0.334313] audit: initializing netlink socket (disabled)
[ 0.334322] type=2000 audit(1386580009.229:1): initialized
[ 0.344934] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.346221] zbud: loaded
[ 0.346368] VFS: Disk quotas dquot_6.5.2
[ 0.346402] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.346536] msgmni has been set to 32084
[ 0.346796] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.346835] io scheduler noop registered
[ 0.346836] io scheduler deadline registered
[ 0.346865] io scheduler cfq registered (default)
[ 0.347349] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.347360] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.347396] vesafb: mode is 1920x1080x32, linelength=7680, pages=0
[ 0.347397] vesafb: scrolling: redraw
[ 0.347398] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[ 0.347823] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90005b00000, using 8128k, total 8128k
[ 0.578242] Console: switching to colour frame buffer device 240x67
[ 0.807747] fb0: VESA VGA frame buffer device
[ 0.807757] intel_idle: MWAIT substates: 0x1120
[ 0.807762] intel_idle: v0.4 model 0x1E
[ 0.807763] intel_idle: lapic_timer_reliable_states 0x2
[ 0.807863] GHES: HEST is not enabled!
[ 0.807910] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.828427] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.828857] Linux agpgart interface v0.103
[ 0.828916] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.863321] i8042: Failed to disable AUX port, but continuing anyway... Is this a SiS?
[ 0.863322] i8042: If AUX port is really absent please use the 'i8042.noaux' option
[ 1.112648] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.112911] mousedev: PS/2 mouse device common for all mice
[ 1.112970] rtc_cmos 00:03: RTC can wake from S4
[ 1.113176] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.113202] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs
[ 1.113256] drop_monitor: Initializing network drop monitor service
[ 1.113300] TCP: cubic registered
[ 1.113373] NET: Registered protocol family 10
[ 1.113502] NET: Registered protocol family 17
[ 1.113510] Key type dns_resolver registered
[ 1.113880] registered taskstats version 1
[ 1.114672] Magic number: 9:729:120
[ 1.114788] rtc_cmos 00:03: setting system clock to 2013-12-09 09:06:50 UTC (1386580010)
[ 1.114809] PM: Hibernation image not present or could not be loaded.
[ 1.115666] Freeing unused kernel memory: 1160K (ffffffff818cd000 - ffffffff819ef000)
[ 1.115667] Write protecting the kernel read-only data: 8192k
[ 1.117953] Freeing unused kernel memory: 980K (ffff88000150b000 - ffff880001600000)
[ 1.118752] Freeing unused kernel memory: 320K (ffff8800017b0000 - ffff880001800000)
[ 1.126109] systemd-udevd[59]: starting version 208
[ 1.182576] raid6: sse2x1 6636 MB/s
[ 1.239076] raid6: sse2x2 7920 MB/s
[ 1.295671] raid6: sse2x4 8813 MB/s
[ 1.295672] raid6: using algorithm sse2x4 (8813 MB/s)
[ 1.295673] raid6: using ssse3x2 recovery algorithm
[ 1.295789] xor: measuring software checksum speed
[ 1.329002] prefetch64-sse: 11398.800 MB/sec
[ 1.335673] tsc: Refined TSC clocksource calibration: 2719.999 MHz
[ 1.362248] generic_sse: 9919.200 MB/sec
[ 1.362249] xor: using function: prefetch64-sse (11398.800 MB/sec)
[ 1.365021] bio: create slab <bio-1> at 1
[ 1.365970] Btrfs loaded
[ 1.389228] ACPI: bus type USB registered
[ 1.389249] usbcore: registered new interface driver usbfs
[ 1.389257] usbcore: registered new interface driver hub
[ 1.389342] usbcore: registered new device driver usb
[ 1.389714] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.389908] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.390028] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 1.390033] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.390065] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff00
[ 1.390196] ehci-pci: EHCI PCI platform driver
[ 1.390384] hub 1-0:1.0: USB hub found
[ 1.390755] hub 1-0:1.0: 2 ports detected
[ 1.391417] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 1.391422] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
[ 1.391451] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000fe00
[ 1.391620] SCSI subsystem initialized
[ 1.391918] hub 2-0:1.0: USB hub found
[ 1.391926] hub 2-0:1.0: 2 ports detected
[ 1.392079] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 1.392084] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 3
[ 1.392111] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000fd00
[ 1.392233] hub 3-0:1.0: USB hub found
[ 1.392240] hub 3-0:1.0: 2 ports detected
[ 1.392390] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.392395] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
[ 1.392422] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fc00
[ 1.392535] hub 4-0:1.0: USB hub found
[ 1.392540] hub 4-0:1.0: 2 ports detected
[ 1.392802] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.392807] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
[ 1.392837] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fb00
[ 1.392949] hub 5-0:1.0: USB hub found
[ 1.392955] hub 5-0:1.0: 2 ports detected
[ 1.393054] libata version 3.00 loaded.
[ 1.393188] pata_jmicron 0000:02:00.1: enabling device (0000 -> 0001)
[ 1.394042] scsi0 : pata_jmicron
[ 1.394215] scsi1 : pata_jmicron
[ 1.394245] ata1: PATA max UDMA/100 cmd 0xbf00 ctl 0xbe00 bmdma 0xbb00 irq 17
[ 1.394247] ata2: PATA max UDMA/100 cmd 0xbd00 ctl 0xbc00 bmdma 0xbb08 irq 17
[ 1.394266] pata_jmicron 0000:04:00.1: enabling device (0000 -> 0001)
[ 1.394918] scsi2 : pata_jmicron
[ 1.395081] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.395088] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
[ 1.395109] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fa00
[ 1.395131] scsi3 : pata_jmicron
[ 1.395163] ata3: PATA max UDMA/100 cmd 0xdf00 ctl 0xde00 bmdma 0xdb00 irq 16
[ 1.395164] ata4: PATA max UDMA/100 cmd 0xdd00 ctl 0xdc00 bmdma 0xdb08 irq 16
[ 1.395266] hub 6-0:1.0: USB hub found
[ 1.395271] hub 6-0:1.0: 2 ports detected
[ 1.395419] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 1.395424] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 7
[ 1.395444] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000f900
[ 1.395583] hub 7-0:1.0: USB hub found
[ 1.395589] hub 7-0:1.0: 2 ports detected
[ 1.396330] ehci-pci 0000:00:1a.7: EHCI Host Controller
[ 1.396335] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 8
[ 1.396346] ehci-pci 0000:00:1a.7: debug port 2
[ 1.400251] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
[ 1.400255] ehci-pci 0000:00:1a.7: irq 18, io mem 0xfbfff000
[ 1.408930] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 1.409119] hub 8-0:1.0: USB hub found
[ 1.409125] hub 8-0:1.0: 6 ports detected
[ 1.432300] hub 1-0:1.0: USB hub found
[ 1.432306] hub 1-0:1.0: 2 ports detected
[ 1.455618] hub 2-0:1.0: USB hub found
[ 1.455629] hub 2-0:1.0: 2 ports detected
[ 1.478906] hub 3-0:1.0: USB hub found
[ 1.478918] hub 3-0:1.0: 2 ports detected
[ 1.479349] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 1.479356] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 9
[ 1.479367] ehci-pci 0000:00:1d.7: debug port 2
[ 1.483286] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[ 1.483290] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfbffe000
[ 1.492182] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.492500] hub 9-0:1.0: USB hub found
[ 1.492512] hub 9-0:1.0: 8 ports detected
[ 1.515623] hub 4-0:1.0: USB hub found
[ 1.515630] hub 4-0:1.0: 2 ports detected
[ 1.538836] hub 5-0:1.0: USB hub found
[ 1.538848] hub 5-0:1.0: 2 ports detected
[ 1.562150] hub 6-0:1.0: USB hub found
[ 1.562162] hub 6-0:1.0: 2 ports detected
[ 1.585457] hub 7-0:1.0: USB hub found
[ 1.585468] hub 7-0:1.0: 2 ports detected
[ 1.585580] ahci 0000:00:1f.2: version 3.0
[ 1.585684] ahci 0000:00:1f.2: irq 45 for MSI/MSI-X
[ 1.585725] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 1.598739] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[ 1.598746] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ems apst
[ 1.632557] scsi4 : ahci
[ 1.632777] scsi5 : ahci
[ 1.632936] scsi6 : ahci
[ 1.633133] scsi7 : ahci
[ 1.633247] scsi8 : ahci
[ 1.633312] scsi9 : ahci
[ 1.633370] ata5: SATA max UDMA/133 abar m2048 at 0xfbffd000 port 0xfbffd100 irq 45
[ 1.633374] ata6: SATA max UDMA/133 abar m2048 at 0xfbffd000 port 0xfbffd180 irq 45
[ 1.633376] ata7: SATA max UDMA/133 abar m2048 at 0xfbffd000 port 0xfbffd200 irq 45
[ 1.633379] ata8: SATA max UDMA/133 abar m2048 at 0xfbffd000 port 0xfbffd280 irq 45
[ 1.633382] ata9: SATA max UDMA/133 abar m2048 at 0xfbffd000 port 0xfbffd300 irq 45
[ 1.633387] ata10: SATA max UDMA/133 abar m2048 at 0xfbffd000 port 0xfbffd380 irq 45
[ 1.645352] ahci 0000:02:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 1.645358] ahci 0000:02:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 1.645690] scsi10 : ahci
[ 1.645924] scsi11 : ahci
[ 1.646004] ata11: SATA max UDMA/133 abar m8192 at 0xfbafe000 port 0xfbafe100 irq 16
[ 1.646008] ata12: SATA max UDMA/133 abar m8192 at 0xfbafe000 port 0xfbafe180 irq 16
[ 1.658664] ahci 0000:04:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 1.658670] ahci 0000:04:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 1.658996] scsi12 : ahci
[ 1.659212] scsi13 : ahci
[ 1.659294] ata13: SATA max UDMA/133 abar m8192 at 0xfbdfe000 port 0xfbdfe100 irq 19
[ 1.659299] ata14: SATA max UDMA/133 abar m8192 at 0xfbdfe000 port 0xfbdfe180 irq 19
[ 1.964942] ata12: SATA link down (SStatus 0 SControl 300)
[ 1.964982] ata11: SATA link down (SStatus 0 SControl 300)
[ 1.984915] ata13: SATA link down (SStatus 0 SControl 300)
[ 1.984954] ata14: SATA link down (SStatus 0 SControl 300)
[ 2.101430] usb 1-1: new full-speed USB device number 2 using uhci_hcd
[ 2.111412] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.112394] ata5.00: ATA-8: ST4000DM000-1F2168, CC52, max UDMA/133
[ 2.112399] ata5.00: 7814037168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 2.132880] ata5.00: configured for UDMA/133
[ 2.133057] scsi 4:0:0:0: Direct-Access ATA ST4000DM000-1F21 CC52 PQ: 0 ANSI: 5
[ 2.279090] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.281586] sd 4:0:0:0: [sda] 7814037168 512-byte logical blocks: (4.00 TB/3.63 TiB)
[ 2.281589] sd 4:0:0:0: [sda] 4096-byte physical blocks
[ 2.281625] sd 4:0:0:0: [sda] Write Protect is off
[ 2.281627] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.281642] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.285465] usbcore: registered new interface driver usbhid
[ 2.285467] usbhid: USB HID core driver
[ 2.285942] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1:1.0/input/input1
[ 2.285979] hid-generic 0003:046D:C529.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:1a.0-1/input0
[ 2.286186] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1:1.1/input/input2
[ 2.286319] hid-generic 0003:046D:C529.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1a.0-1/input1
[ 2.305665] sda: unknown partition table
[ 2.305831] sd 4:0:0:0: [sda] Attached SCSI disk
[ 2.617441] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.618426] ata6.00: ATA-8: ST4000DM000-1F2168, CC52, max UDMA/133
[ 2.618431] ata6.00: 7814037168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 2.640438] ata6.00: configured for UDMA/133
[ 2.640596] scsi 5:0:0:0: Direct-Access ATA ST4000DM000-1F21 CC52 PQ: 0 ANSI: 5
[ 2.640793] sd 5:0:0:0: [sdb] 7814037168 512-byte logical blocks: (4.00 TB/3.63 TiB)
[ 2.640796] sd 5:0:0:0: [sdb] 4096-byte physical blocks
[ 2.640834] sd 5:0:0:0: [sdb] Write Protect is off
[ 2.640836] sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.640852] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.715663] sdb: sdb1
[ 2.716051] sd 5:0:0:0: [sdb] Attached SCSI disk
[ 2.825388] random: lvm urandom read with 46 bits of entropy available
[ 2.933717] usb 4-2: new full-speed USB device number 2 using uhci_hcd
[ 2.960351] ata7: SATA link down (SStatus 0 SControl 300)
[ 3.123029] logitech-djreceiver 0003:046D:C52B.0005: hiddev0,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-2/input2
[ 3.124791] input: Logitech Unifying Device. Wireless PID:101a as /devices/pci0000:00/0000:00:1d.0/usb4/4-2/4-2:1.2/0003:046D:C52B.0005/input/input3
[ 3.125096] logitech-djdevice 0003:046D:C52B.0006: input,hidraw3: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:101a] on usb-0000:00:1d.0-2:1
[ 3.126899] input: Logitech Unifying Device. Wireless PID:2012 as /devices/pci0000:00/0000:00:1d.0/usb4/4-2/4-2:1.2/0003:046D:C52B.0005/input/input4
[ 3.127132] logitech-djdevice 0003:046D:C52B.0007: input,hidraw4: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:2012] on usb-0000:00:1d.0-2:2
[ 3.343211] usb 5-1: new low-speed USB device number 2 using uhci_hcd
[ 3.446451] ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.446800] ata8.00: ATA-8: INTEL SSDSA2CW080G3, 4PC10362, max UDMA/133
[ 3.446805] ata8.00: 156301488 sectors, multi 1: LBA48 NCQ (depth 31/32)
[ 3.447209] ata8.00: configured for UDMA/133
[ 3.447307] scsi 7:0:0:0: Direct-Access ATA INTEL SSDSA2CW08 4PC1 PQ: 0 ANSI: 5
[ 3.447410] sd 7:0:0:0: [sdc] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[ 3.447500] sd 7:0:0:0: [sdc] Write Protect is off
[ 3.447503] sd 7:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 3.447521] sd 7:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.449953] sdc: sdc1 sdc2 sdc3 sdc4
[ 3.450665] sd 7:0:0:0: [sdc] Attached SCSI disk
[ 3.478790] btrfs: device label ROOT devid 1 transid 24773 /dev/sdc3
[ 3.479421] btrfs: device label HOME devid 1 transid 28896 /dev/sdc4
[ 3.766005] ata9: SATA link down (SStatus 0 SControl 300)
[ 4.252066] ata10: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.252850] ata10.00: ATA-8: ST33000651AS, CC43, max UDMA/133
[ 4.252855] ata10.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 4.253742] ata10.00: configured for UDMA/133
[ 4.253839] scsi 9:0:0:0: Direct-Access ATA ST33000651AS CC43 PQ: 0 ANSI: 5
[ 4.253940] sd 9:0:0:0: [sdd] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB)
[ 4.253976] sd 9:0:0:0: [sdd] Write Protect is off
[ 4.253978] sd 9:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 4.253994] sd 9:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.300219] sdd: sdd1
[ 4.300607] sd 9:0:0:0: [sdd] Attached SCSI disk
[ 4.414481] device-mapper: uevent: version 1.0.3
[ 4.414534] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel at redhat.com
[ 4.416835] btrfs: device label ROOT devid 1 transid 24773 /dev/sdc3
[ 4.417377] btrfs: disk space caching is enabled
[ 4.417379] btrfs: has skinny extents
[ 4.418551] bio: create slab <bio-2> at 2
[ 4.443584] Btrfs detected SSD devices, enabling SSD mode
[ 4.444994] random: nonblocking pool is initialized
[ 4.582441] systemd[1]: systemd 208 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
[ 4.583247] systemd[1]: Set hostname to <HTPC>.
[ 4.647498] systemd[1]: [/usr/lib/systemd/system/pacserve-ports.service:15] Unknown lvalue 'ExecRestart' in section 'Service'
[ 4.647779] systemd[1]: [/usr/lib/systemd/system/lcdd.service:8] Unknown lvalue 'ControlGroup' in section 'Service'
[ 4.648851] systemd[1]: Cannot add dependency job for unit nmbd.service, ignoring: Unit nmbd.service failed to load: No such file or directory.
[ 4.648857] systemd[1]: Cannot add dependency job for unit smbd.service, ignoring: Unit smbd.service failed to load: No such file or directory.
[ 4.648880] systemd[1]: Cannot add dependency job for unit arch-daemons.target, ignoring: Unit arch-daemons.target failed to load: No such file or directory.
[ 4.648895] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[ 4.648903] systemd[1]: Cannot add dependency job for unit console-kit-daemon.service, ignoring: Unit console-kit-daemon.service failed to load: No such file or directory.
[ 4.650294] systemd[1]: Starting Replay Read-Ahead Data...
[ 4.650669] systemd[1]: Starting Collect Read-Ahead Data...
[ 4.651038] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 4.651078] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 4.651097] systemd[1]: Starting Remote File Systems.
[ 4.651106] systemd[1]: Reached target Remote File Systems.
[ 4.651116] systemd[1]: Starting Delayed Shutdown Socket.
[ 4.651138] systemd[1]: Listening on Delayed Shutdown Socket.
[ 4.651150] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 4.651168] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 4.651176] systemd[1]: Starting Device-mapper event daemon FIFOs.
[ 4.651197] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 4.651204] systemd[1]: Starting LVM2 metadata daemon socket.
[ 4.651222] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 4.651237] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 4.651262] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 4.651270] systemd[1]: Starting Encrypted Volumes.
[ 4.651278] systemd[1]: Reached target Encrypted Volumes.
[ 4.651303] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 4.651371] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 4.651385] systemd[1]: Starting Journal Socket.
[ 4.651423] systemd[1]: Listening on Journal Socket.
[ 4.651444] systemd[1]: Starting Store Sound Card State...
[ 4.651689] systemd[1]: Mounting Debug File System...
[ 4.656158] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 4.656369] systemd[1]: Mounting POSIX Message Queue File System...
[ 4.656591] systemd[1]: Mounting Huge Pages File System...
[ 4.656871] systemd[1]: Starting Journal Service...
[ 4.657265] systemd[1]: Started Journal Service.
[ 4.693981] systemd-journald[179]: Vacuuming done, freed 0 bytes
[ 4.741734] systemd-udevd[209]: starting version 208
[ 4.774073] it87: Found IT8720F chip at 0x290, revision 8
[ 4.774081] it87: VID is disabled (pins used for GPIO)
[ 4.774091] it87: Routing internal VCCH to in7
[ 4.774094] it87: Beeping is supported
[ 4.774659] btrfs: use ssd allocation scheme
[ 4.774662] btrfs: use lzo compression
[ 4.774664] btrfs: enabling auto defrag
[ 4.774665] btrfs: disk space caching is enabled
[ 4.780808] fuse init (API version 7.22)
[ 4.783949] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5
[ 4.783954] ACPI: Power Button [PWRB]
[ 4.784002] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[ 4.784004] ACPI: Power Button [PWRF]
[ 4.797850] parport_pc 00:07: reported by Plug and Play ACPI
[ 4.797901] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 4.803843] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 4.810285] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 4.810294] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 4.810487] r8169 0000:03:00.0: irq 46 for MSI/MSI-X
[ 4.810624] r8169 0000:03:00.0 eth0: RTL8168d/8111d at 0xffffc90006cb2000, 00:24:1d:d9:1a:a7, XID 083000c0 IRQ 46
[ 4.810626] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 4.818180] [drm] Initialized drm 1.1.0 20060810
[ 4.835745] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \GP2C 1 (20131115/utaddress-251)
[ 4.835750] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.835770] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 4.851291] input: iMON Panel, Knob and Mouse(15c2:0038) as /devices/pci0000:00/0000:00:1d.1/usb5/5-1/5-1:1.0/input/input7
[ 4.851543] cfg80211: Calling CRDA to update world regulatory domain
[ 4.852669] [drm] radeon kernel modesetting enabled.
[ 4.852708] checking generic (e0000000 7f0000) vs hw (e0000000 10000000)
[ 4.852709] fb: conflicting fb hw usage radeondrmfb vs VESA VGA - removing generic driver
[ 4.852747] Console: switching to colour dummy device 80x25
[ 4.853142] [drm] initializing kernel modesetting (PITCAIRN 0x1002:0x6818 0x1462:0x2740).
[ 4.853165] [drm] register mmio base: 0xFBC80000
[ 4.853166] [drm] register mmio size: 262144
[ 4.853221] ATOM BIOS: 113
[ 4.853292] radeon 0000:01:00.0: VRAM: 2048M 0x0000000000000000 - 0x000000007FFFFFFF (2048M used)
[ 4.853294] radeon 0000:01:00.0: GTT: 1024M 0x0000000080000000 - 0x00000000BFFFFFFF
[ 4.853296] [drm] Detected VRAM RAM=2048M, BAR=256M
[ 4.853297] [drm] RAM width 256bits DDR
[ 4.853329] [TTM] Zone kernel: Available graphics memory: 8214956 kiB
[ 4.853330] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 4.853331] [TTM] Initializing pool allocator
[ 4.853335] [TTM] Initializing DMA pool allocator
[ 4.853348] [drm] radeon: 2048M of VRAM memory ready
[ 4.853349] [drm] radeon: 1024M of GTT memory ready.
[ 4.859102] [drm] GART: num cpu pages 262144, num gpu pages 262144
[ 4.859366] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
[ 4.860449] [drm] probing gen 2 caps for device 8086:d138 = 393d02/0
[ 4.860454] [drm] PCIE gen 2 link speeds already enabled
[ 4.862593] EDAC MC: Ver: 3.0.0
[ 4.864016] EDAC MC0: Giving out device to module i7core_edac.c controller i7 core #0: DEV 0000:3f:03.0 (POLLED)
[ 4.864051] EDAC PCI0: Giving out device to module i7core_edac controller EDAC PCI controller: DEV 0000:3f:03.0 (POLLED)
[ 4.864055] EDAC i7core: Driver loaded, 1 memory controller(s) found.
[ 4.869574] input: PC Speaker as /devices/platform/pcspkr/input/input9
[ 4.874478] [drm] Loading PITCAIRN Microcode
[ 4.877563] microcode: CPU0 sig=0x106e5, pf=0x2, revision=0x4
[ 4.877608] platform microcode: Direct firmware load failed with error -2
[ 4.877610] platform microcode: Falling back to user helper
[ 4.882600] [drm] PCIE GART of 1024M enabled (table at 0x0000000000276000).
[ 4.882750] radeon 0000:01:00.0: WB enabled
[ 4.882753] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0xffff8804051d3c00
[ 4.882755] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0xffff8804051d3c04
[ 4.882757] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0xffff8804051d3c08
[ 4.882758] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0xffff8804051d3c0c
[ 4.882760] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0xffff8804051d3c10
[ 4.883765] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000075a18 and cpu addr 0xffffc90007335a18
[ 4.883767] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 4.883768] [drm] Driver supports precise vblank timestamp query.
[ 4.883785] radeon 0000:01:00.0: irq 47 for MSI/MSI-X
[ 4.883793] radeon 0000:01:00.0: radeon: using MSI.
[ 4.883821] [drm] radeon: irq initialized.
[ 4.887858] Registered IR keymap rc-imon-pad
[ 4.887925] input: iMON Remote (15c2:0038) as /devices/pci0000:00/0000:00:1d.1/usb5/5-1/5-1:1.0/rc/rc0/input8
[ 4.889195] rc0: iMON Remote (15c2:0038) as /devices/pci0000:00/0000:00:1d.1/usb5/5-1/5-1:1.0/rc/rc0
[ 4.897896] imon 5-1:1.0: iMON device (15c2:0038, intf0) on usb<5:2> initialized
[ 4.897914] imon 5-1:1.1: iMON device (15c2:0038, intf1) on usb<5:2> initialized
[ 4.897926] usbcore: registered new interface driver imon
[ 4.913536] btrfs: device label ROOT devid 1 transid 24774 /dev/sdc3
[ 4.936845] ppdev: user-space parallel port driver
[ 4.946662] iTCO_vendor_support: vendor-support=0
[ 4.948844] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[ 4.948872] iTCO_wdt: Found a P55 TCO device (Version=2, TCOBASE=0x0460)
[ 4.948955] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 4.950110] gpio_ich: GPIO from 180 to 255 on gpio_ich
[ 4.955124] btrfs: device label HOME devid 1 transid 28896 /dev/sdc4
[ 4.959706] microcode: CPU1 sig=0x106e5, pf=0x2, revision=0x4
[ 4.959720] platform microcode: Direct firmware load failed with error -2
[ 4.959722] platform microcode: Falling back to user helper
[ 4.960971] cfg80211: World regulatory domain updated:
[ 4.960973] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 4.960975] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 4.960976] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 4.960978] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
[ 4.960979] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
[ 4.960980] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
[ 4.960981] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
[ 4.964901] imon 5-1:1.0: Looks like you're trying to use an IR protocol this device does not support
[ 4.964904] imon 5-1:1.0: Unsupported IR protocol specified, overriding to iMON IR protocol
[ 4.967968] microcode: CPU2 sig=0x106e5, pf=0x2, revision=0x4
[ 4.967981] platform microcode: Direct firmware load failed with error -2
[ 4.967982] platform microcode: Falling back to user helper
[ 4.969058] microcode: CPU3 sig=0x106e5, pf=0x2, revision=0x4
[ 4.969070] platform microcode: Direct firmware load failed with error -2
[ 4.969074] platform microcode: Falling back to user helper
[ 4.970224] microcode: Microcode Update Driver: v2.00 <tigran at aivazian.fsnet.co.uk>, Peter Oruba
[ 4.985007] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
[ 4.994266] btrfs: device label HOME devid 1 transid 28896 /dev/sdc4
[ 4.997119] btrfs: use ssd allocation scheme
[ 4.997122] btrfs: use lzo compression
[ 4.997125] btrfs: enabling auto defrag
[ 4.997126] btrfs: disk space caching is enabled
[ 4.997127] btrfs: has skinny extents
[ 5.057222] EXT4-fs (sdc2): mounted filesystem with ordered data mode. Opts: discard
[ 5.120753] [drm] ring test on 0 succeeded in 3 usecs
[ 5.120759] [drm] ring test on 1 succeeded in 1 usecs
[ 5.120764] [drm] ring test on 2 succeeded in 1 usecs
[ 5.120830] [drm] ring test on 3 succeeded in 2 usecs
[ 5.120841] [drm] ring test on 4 succeeded in 1 usecs
[ 5.313331] [drm] ring test on 5 succeeded in 2 usecs
[ 5.313339] [drm] UVD initialized successfully.
[ 5.314678] [drm] Enabling audio 0 support
[ 5.314680] [drm] Enabling audio 1 support
[ 5.314681] [drm] Enabling audio 2 support
[ 5.314682] [drm] Enabling audio 3 support
[ 5.314684] [drm] Enabling audio 4 support
[ 5.314685] [drm] Enabling audio 5 support
[ 5.314750] [drm] ib test on ring 0 succeeded in 0 usecs
[ 5.314808] [drm] ib test on ring 1 succeeded in 0 usecs
[ 5.314865] [drm] ib test on ring 2 succeeded in 0 usecs
[ 5.314898] [drm] ib test on ring 3 succeeded in 0 usecs
[ 5.314931] [drm] ib test on ring 4 succeeded in 1 usecs
[ 5.357230] ath: EEPROM regdomain: 0x809c
[ 5.357233] ath: EEPROM indicates we should expect a country code
[ 5.357234] ath: doing EEPROM country->regdmn map search
[ 5.357236] ath: country maps to regdmn code: 0x52
[ 5.357237] ath: Country alpha2 being used: CN
[ 5.357238] ath: Regpair used: 0x52
[ 5.368011] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 5.368320] ieee80211 phy0: Atheros AR5416 MAC/BB Rev:2 AR2133 RF Rev:81 mem=0xffffc90007a60000, irq=19
[ 5.369504] cfg80211: Calling CRDA for country: CN
[ 5.374879] cfg80211: Regulatory domain changed to country: CN
[ 5.374881] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 5.374883] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 5.374884] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2300 mBm)
[ 5.374885] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2300 mBm)
[ 5.374887] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm)
[ 5.374888] cfg80211: (57240000 KHz - 59400000 KHz @ 2160000 KHz), (N/A, 2800 mBm)
[ 5.374889] cfg80211: (59400000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4400 mBm)
[ 5.374890] cfg80211: (63720000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 2800 mBm)
[ 5.383427] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: barrier=1,acl,commit=60
[ 5.386861] systemd-journald[179]: Received request to flush runtime journal from PID 1
[ 5.477200] [drm] ib test on ring 5 succeeded
[ 5.478020] [drm] Radeon Display Connectors
[ 5.478022] [drm] Connector 0:
[ 5.478023] [drm] DP-1
[ 5.478024] [drm] HPD4
[ 5.478026] [drm] DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
[ 5.478027] [drm] Encoders:
[ 5.478028] [drm] DFP1: INTERNAL_UNIPHY2
[ 5.478029] [drm] Connector 1:
[ 5.478030] [drm] DP-2
[ 5.478031] [drm] HPD5
[ 5.478033] [drm] DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c
[ 5.478034] [drm] Encoders:
[ 5.478035] [drm] DFP2: INTERNAL_UNIPHY2
[ 5.478036] [drm] Connector 2:
[ 5.478037] [drm] HDMI-A-1
[ 5.478038] [drm] HPD1
[ 5.478039] [drm] DDC: 0x6550 0x6550 0x6554 0x6554 0x6558 0x6558 0x655c 0x655c
[ 5.478040] [drm] Encoders:
[ 5.478041] [drm] DFP3: INTERNAL_UNIPHY1
[ 5.478042] [drm] Connector 3:
[ 5.478043] [drm] DVI-I-1
[ 5.478044] [drm] HPD6
[ 5.478046] [drm] DDC: 0x6580 0x6580 0x6584 0x6584 0x6588 0x6588 0x658c 0x658c
[ 5.478047] [drm] Encoders:
[ 5.478048] [drm] DFP4: INTERNAL_UNIPHY
[ 5.478049] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 5.478112] [drm] Internal thermal controller with fan control
[ 5.478169] [drm] probing gen 2 caps for device 8086:d138 = 393d02/0
[ 5.478194] == power state 0 ==
[ 5.478195] ui class: none
[ 5.478197] internal class: boot
[ 5.478198] caps:
[ 5.478200] uvd vclk: 0 dclk: 0
[ 5.478201] power level 0 sclk: 15000 mclk: 15000 vddc: 900 vddci: 950 pcie gen: 2
[ 5.478202] status: c r b
[ 5.478204] == power state 1 ==
[ 5.478204] ui class: performance
[ 5.478205] internal class: none
[ 5.478206] caps:
[ 5.478207] uvd vclk: 0 dclk: 0
[ 5.478212] power level 0 sclk: 30000 mclk: 15000 vddc: 825 vddci: 850 pcie gen: 2
[ 5.478214] power level 1 sclk: 45000 mclk: 120000 vddc: 900 vddci: 975 pcie gen: 2
[ 5.478217] power level 2 sclk: 105000 mclk: 120000 vddc: 1219 vddci: 975 pcie gen: 2
[ 5.478218] status:
[ 5.478220] == power state 2 ==
[ 5.478221] ui class: none
[ 5.478223] internal class: uvd
[ 5.478225] caps: video
[ 5.478228] uvd vclk: 72000 dclk: 56000
[ 5.478230] power level 0 sclk: 45000 mclk: 120000 vddc: 900 vddci: 975 pcie gen: 2
[ 5.478233] power level 1 sclk: 45000 mclk: 120000 vddc: 900 vddci: 975 pcie gen: 2
[ 5.478235] power level 2 sclk: 105000 mclk: 120000 vddc: 1219 vddci: 975 pcie gen: 2
[ 5.478237] status:
[ 5.478238] == power state 3 ==
[ 5.478240] ui class: none
[ 5.478241] internal class: ulv
[ 5.478243] caps:
[ 5.478245] uvd vclk: 0 dclk: 0
[ 5.478248] power level 0 sclk: 30000 mclk: 15000 vddc: 825 vddci: 850 pcie gen: 2
[ 5.478250] power level 1 sclk: 30000 mclk: 15000 vddc: 825 vddci: 850 pcie gen: 2
[ 5.478253] power level 2 sclk: 30000 mclk: 15000 vddc: 825 vddci: 850 pcie gen: 2
[ 5.478254] status:
[ 5.527373] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 5.712852] r8169 0000:03:00.0 eth0: link down
[ 5.713497] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 5.720300] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 6.273277] switching from power state:
[ 6.273280] ui class: none
[ 6.273281] internal class: boot
[ 6.273283] caps:
[ 6.273284] uvd vclk: 0 dclk: 0
[ 6.273286] power level 0 sclk: 15000 mclk: 15000 vddc: 900 vddci: 950 pcie gen: 2
[ 6.273287] status: c b
[ 6.273288] switching to power state:
[ 6.273289] ui class: performance
[ 6.273290] internal class: none
[ 6.273291] caps:
[ 6.273292] uvd vclk: 0 dclk: 0
[ 6.273293] power level 0 sclk: 30000 mclk: 15000 vddc: 825 vddci: 850 pcie gen: 2
[ 6.273294] power level 1 sclk: 45000 mclk: 120000 vddc: 900 vddci: 975 pcie gen: 2
[ 6.273296] power level 2 sclk: 105000 mclk: 120000 vddc: 1219 vddci: 975 pcie gen: 2
[ 6.273297] status: r
[ 6.944729] [drm] radeon: dpm initialized
[ 7.028037] [drm] fb mappable at 0xE1480000
[ 7.028040] [drm] vram apper at 0xE0000000
[ 7.028041] [drm] size 8294400
[ 7.028042] [drm] fb depth is 24
[ 7.028043] [drm] pitch is 7680
[ 7.028106] fbcon: radeondrmfb (fb0) is primary device
[ 7.028196] switching from power state:
[ 7.028197] ui class: performance
[ 7.028198] internal class: none
[ 7.028198] caps:
[ 7.028199] uvd vclk: 0 dclk: 0
[ 7.028200] power level 0 sclk: 30000 mclk: 15000 vddc: 825 vddci: 850 pcie gen: 2
[ 7.028201] power level 1 sclk: 45000 mclk: 120000 vddc: 900 vddci: 975 pcie gen: 2
[ 7.028202] power level 2 sclk: 105000 mclk: 120000 vddc: 1219 vddci: 975 pcie gen: 2
[ 7.028203] status: c r
[ 7.028203] switching to power state:
[ 7.028203] ui class: performance
[ 7.028204] internal class: none
[ 7.028204] caps:
[ 7.028205] uvd vclk: 0 dclk: 0
[ 7.028205] power level 0 sclk: 30000 mclk: 15000 vddc: 825 vddci: 850 pcie gen: 2
[ 7.028206] power level 1 sclk: 45000 mclk: 120000 vddc: 900 vddci: 975 pcie gen: 2
[ 7.028207] power level 2 sclk: 105000 mclk: 120000 vddc: 1219 vddci: 975 pcie gen: 2
[ 7.028208] status: c r
[ 7.682696] Console: switching to colour frame buffer device 240x67
[ 7.687612] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[ 7.687614] radeon 0000:01:00.0: registered panic notifier
[ 7.687621] [drm] Initialized radeon 2.35.0 20080528 for 0000:01:00.0 on minor 0
[ 7.687759] ALSA sound/pci/hda/hda_intel.c:3173 0000:01:00.1: Handle VGA-switcheroo audio client
[ 7.687762] ALSA sound/pci/hda/hda_intel.c:3377 0000:01:00.1: Using LPIB position fix
[ 7.687764] ALSA sound/pci/hda/hda_intel.c:3498 0000:01:00.1: Force to non-snoop mode
[ 7.687816] snd_hda_intel 0000:01:00.1: irq 48 for MSI/MSI-X
[ 7.688062] ALSA sound/pci/hda/hda_intel.c:3636 0000:01:00.1: chipset global capabilities = 0x0
[ 7.690475] ALSA sound/pci/hda/hda_intel.c:1205 0000:01:00.1: codec_mask = 0x1
[ 7.690527] ALSA sound/pci/hda/hda_intel.c:1678 0000:01:00.1: codec #0 probed OK
[ 7.690529] ALSA sound/pci/hda/hda_intel.c:1799 0000:01:00.1: Enable sync_write for stable communication
[ 7.700592] ALSA sound/pci/hda/patch_hdmi.c:1513 HDMI status: Codec=0 Pin=3 Presence_Detect=1 ELD_Valid=1
[ 7.700605] ALSA sound/pci/hda/hda_eld.c:684 HDMI ATI/AMD: no speaker allocation for ELD
[ 7.700635] ALSA sound/pci/hda/patch_hdmi.c:1513 HDMI status: Codec=0 Pin=5 Presence_Detect=1 ELD_Valid=1
[ 7.700647] ALSA sound/pci/hda/hda_eld.c:684 HDMI ATI/AMD: no speaker allocation for ELD
[ 7.700677] ALSA sound/pci/hda/patch_hdmi.c:1513 HDMI status: Codec=0 Pin=7 Presence_Detect=1 ELD_Valid=1
[ 7.700689] ALSA sound/pci/hda/hda_eld.c:684 HDMI ATI/AMD: no speaker allocation for ELD
[ 7.700720] ALSA sound/pci/hda/patch_hdmi.c:1513 HDMI status: Codec=0 Pin=9 Presence_Detect=1 ELD_Valid=1
[ 7.700732] ALSA sound/pci/hda/hda_eld.c:684 HDMI ATI/AMD: no speaker allocation for ELD
[ 7.700764] ALSA sound/pci/hda/patch_hdmi.c:1513 HDMI status: Codec=0 Pin=11 Presence_Detect=1 ELD_Valid=1
[ 7.700776] ALSA sound/pci/hda/hda_eld.c:684 HDMI ATI/AMD: no speaker allocation for ELD
[ 7.700811] ALSA sound/pci/hda/patch_hdmi.c:1513 HDMI status: Codec=0 Pin=13 Presence_Detect=1 ELD_Valid=1
[ 7.700823] ALSA sound/pci/hda/hda_eld.c:684 HDMI ATI/AMD: no speaker allocation for ELD
[ 7.700883] input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card0/input15
[ 7.701066] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card0/input14
[ 7.701451] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card0/input13
[ 7.701653] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card0/input12
[ 7.701773] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card0/input11
[ 7.702131] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card0/input10
[ 8.221814] ALSA sound/pci/hda/patch_hdmi.c:1170 HDMI hot plug event: Codec=0 Pin=3 Device=0 Inactive=0 Presence_Detect=0 ELD_Valid=1
[ 8.221855] ALSA sound/pci/hda/patch_hdmi.c:1513 HDMI status: Codec=0 Pin=3 Presence_Detect=1 ELD_Valid=1
[ 8.222271] ALSA sound/pci/hda/hda_eld.c:442 HDMI: detected monitor at connection type HDMI
[ 8.222273] ALSA sound/pci/hda/hda_eld.c:447 HDMI: available speakers: FL/FR LFE FC RL/RR RC RLC/RRC
[ 8.222277] ALSA sound/pci/hda/hda_eld.c:421 HDMI: supports coding type LPCM: channels = 8, rates = 32000 44100 48000 88200 96000 176400 192000, bits = 16 20 24
[ 8.222280] ALSA sound/pci/hda/hda_eld.c:421 HDMI: supports coding type AC-3: channels = 6, rates = 32000 44100 48000, max bitrate = 640000
[ 8.222283] ALSA sound/pci/hda/hda_eld.c:421 HDMI: supports coding type DTS: channels = 6, rates = 44100 48000 88200 96000, max bitrate = 1536000
[ 8.222285] ALSA sound/pci/hda/hda_eld.c:421 HDMI: supports coding type E-AC-3/DD+ (Dolby Digital Plus): channels = 8, rates = 44100 48000
[ 8.222288] ALSA sound/pci/hda/hda_eld.c:421 HDMI: supports coding type DTS-HD: channels = 8, rates = 44100 48000 88200 96000 176400 192000
[ 8.222291] ALSA sound/pci/hda/hda_eld.c:421 HDMI: supports coding type MLP (Dolby TrueHD): channels = 8, rates = 44100 48000 88200 96000 176400 192000
[ 8.384866] type=1006 audit(1386580017.776:2): pid=516 uid=0 old auid=4294967295 new auid=1000 old ses=4294967295 new ses=1 res=1
[ 8.505458] ALSA sound/pci/hda/hda_intel.c:2185 0000:01:00.1: azx_pcm_prepare: bufsize=0xe100, format=0x15
[ 8.505468] ALSA sound/pci/hda/patch_hdmi.c:678 HDMI: select CA 0xb for 6-channel allocation: FL/FR LFE FC RL/RR RC RLC/RRC
[ 8.505625] HDMI: ASP channel 0 => slot 0
[ 8.505637] HDMI: ASP channel 1 => slot 1
[ 8.505649] HDMI: ASP channel 5 => slot 2
[ 8.505661] HDMI: ASP channel 4 => slot 3
[ 8.505674] HDMI: ASP channel 2 => slot 4
[ 8.505686] HDMI: ASP channel 3 => slot 5
[ 8.505698] HDMI: ASP channel 15 => slot 6
[ 8.505710] HDMI: ASP channel 15 => slot 7
[ 8.505745] ALSA sound/pci/hda/patch_hdmi.c:3110 atihdmi_pin_hbr_setup: NID=0x3, hbr-ctl=0x1
[ 8.505747] ALSA sound/pci/hda/hda_codec.c:1646 hda_codec_setup_stream: NID=0x2, stream=0x1, channel=0, format=0x15
[ 8.510051] ALSA sound/pci/hda/hda_intel.c:2185 0000:01:00.1: azx_pcm_prepare: bufsize=0xe100, format=0x15
[ 8.510058] ALSA sound/pci/hda/patch_hdmi.c:678 HDMI: select CA 0xb for 6-channel allocation: FL/FR LFE FC RL/RR RC RLC/RRC
[ 8.510184] HDMI: ASP channel 0 => slot 0
[ 8.510196] HDMI: ASP channel 1 => slot 1
[ 8.510208] HDMI: ASP channel 5 => slot 2
[ 8.510220] HDMI: ASP channel 4 => slot 3
[ 8.510232] HDMI: ASP channel 2 => slot 4
[ 8.510245] HDMI: ASP channel 3 => slot 5
[ 8.510257] HDMI: ASP channel 15 => slot 6
[ 8.510269] HDMI: ASP channel 15 => slot 7
[ 8.510304] ALSA sound/pci/hda/patch_hdmi.c:3110 atihdmi_pin_hbr_setup: NID=0x3, hbr-ctl=0x1
[ 8.510306] ALSA sound/pci/hda/hda_codec.c:1646 hda_codec_setup_stream: NID=0x2, stream=0x1, channel=0, format=0x15
[ 8.510561] ALSA sound/pci/hda/hda_codec.c:1693 hda_codec_cleanup_stream: NID=0x2
[ 8.510934] ALSA sound/pci/hda/hda_codec.c:1693 hda_codec_cleanup_stream: NID=0x2
[ 8.514187] ALSA sound/pci/hda/hda_intel.c:2185 0000:01:00.1: azx_pcm_prepare: bufsize=0xe100, format=0x15
[ 8.514197] ALSA sound/pci/hda/patch_hdmi.c:678 HDMI: select CA 0xb for 6-channel allocation: FL/FR LFE FC RL/RR RC RLC/RRC
[ 8.514345] HDMI: ASP channel 0 => slot 0
[ 8.514359] HDMI: ASP channel 1 => slot 1
[ 8.514371] HDMI: ASP channel 5 => slot 2
[ 8.514383] HDMI: ASP channel 4 => slot 3
[ 8.514395] HDMI: ASP channel 2 => slot 4
[ 8.514408] HDMI: ASP channel 3 => slot 5
[ 8.514420] HDMI: ASP channel 15 => slot 6
[ 8.514432] HDMI: ASP channel 15 => slot 7
[ 8.514467] ALSA sound/pci/hda/patch_hdmi.c:3110 atihdmi_pin_hbr_setup: NID=0x3, hbr-ctl=0x1
[ 8.514469] ALSA sound/pci/hda/hda_codec.c:1646 hda_codec_setup_stream: NID=0x2, stream=0x1, channel=0, format=0x15
[ 8.514483] ALSA sound/pci/hda/hda_intel.c:2185 0000:01:00.1: azx_pcm_prepare: bufsize=0xe100, format=0x15
[ 8.514488] ALSA sound/pci/hda/patch_hdmi.c:678 HDMI: select CA 0xb for 6-channel allocation: FL/FR LFE FC RL/RR RC RLC/RRC
[ 8.514613] HDMI: ASP channel 0 => slot 0
[ 8.514625] HDMI: ASP channel 1 => slot 1
[ 8.514637] HDMI: ASP channel 5 => slot 2
[ 8.514650] HDMI: ASP channel 4 => slot 3
[ 8.514662] HDMI: ASP channel 2 => slot 4
[ 8.514674] HDMI: ASP channel 3 => slot 5
[ 8.514686] HDMI: ASP channel 15 => slot 6
[ 8.514698] HDMI: ASP channel 15 => slot 7
[ 8.514733] ALSA sound/pci/hda/patch_hdmi.c:3110 atihdmi_pin_hbr_setup: NID=0x3, hbr-ctl=0x1
[ 8.514735] ALSA sound/pci/hda/hda_codec.c:1646 hda_codec_setup_stream: NID=0x2, stream=0x1, channel=0, format=0x15
[ 8.514982] ALSA sound/pci/hda/hda_codec.c:1693 hda_codec_cleanup_stream: NID=0x2
[ 8.515320] ALSA sound/pci/hda/hda_codec.c:1693 hda_codec_cleanup_stream: NID=0x2
[ 8.519602] ALSA sound/pci/hda/hda_intel.c:2185 0000:01:00.1: azx_pcm_prepare: bufsize=0xe100, format=0x15
[ 8.519612] ALSA sound/pci/hda/patch_hdmi.c:678 HDMI: select CA 0xb for 6-channel allocation: FL/FR LFE FC RL/RR RC RLC/RRC
[ 8.519769] HDMI: ASP channel 0 => slot 0
[ 8.519781] HDMI: ASP channel 1 => slot 1
[ 8.519793] HDMI: ASP channel 5 => slot 2
[ 8.519805] HDMI: ASP channel 4 => slot 3
[ 8.519817] HDMI: ASP channel 2 => slot 4
[ 8.519830] HDMI: ASP channel 3 => slot 5
[ 8.519842] HDMI: ASP channel 15 => slot 6
[ 8.519854] HDMI: ASP channel 15 => slot 7
[ 8.519889] ALSA sound/pci/hda/patch_hdmi.c:3110 atihdmi_pin_hbr_setup: NID=0x3, hbr-ctl=0x1
[ 8.519891] ALSA sound/pci/hda/hda_codec.c:1646 hda_codec_setup_stream: NID=0x2, stream=0x1, channel=0, format=0x15
[ 8.519905] ALSA sound/pci/hda/hda_intel.c:2185 0000:01:00.1: azx_pcm_prepare: bufsize=0xe100, format=0x15
[ 8.519910] ALSA sound/pci/hda/patch_hdmi.c:678 HDMI: select CA 0xb for 6-channel allocation: FL/FR LFE FC RL/RR RC RLC/RRC
[ 8.520714] HDMI: ASP channel 0 => slot 0
[ 8.520727] HDMI: ASP channel 1 => slot 1
[ 8.520739] HDMI: ASP channel 5 => slot 2
[ 8.520751] HDMI: ASP channel 4 => slot 3
[ 8.520763] HDMI: ASP channel 2 => slot 4
[ 8.520775] HDMI: ASP channel 3 => slot 5
[ 8.520787] HDMI: ASP channel 15 => slot 6
[ 8.520800] HDMI: ASP channel 15 => slot 7
[ 8.520835] ALSA sound/pci/hda/patch_hdmi.c:3110 atihdmi_pin_hbr_setup: NID=0x3, hbr-ctl=0x1
[ 8.520837] ALSA sound/pci/hda/hda_codec.c:1646 hda_codec_setup_stream: NID=0x2, stream=0x1, channel=0, format=0x15
[ 13.537723] ALSA sound/pci/hda/hda_codec.c:1693 hda_codec_cleanup_stream: NID=0x2
[ 13.538072] ALSA sound/pci/hda/hda_codec.c:1693 hda_codec_cleanup_stream: NID=0x2
[ 13.661547] wlan0: authenticate with 00:23:69:65:2b:59
[ 13.665981] wlan0: send auth to 00:23:69:65:2b:59 (try 1/3)
[ 13.690182] wlan0: authenticated
[ 13.693626] wlan0: associate with 00:23:69:65:2b:59 (try 1/3)
[ 13.698360] wlan0: RX AssocResp from 00:23:69:65:2b:59 (capab=0x411 status=0 aid=2)
[ 13.698423] wlan0: associated
[ 13.698682] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 56.210117] ALSA sound/pci/hda/hda_intel.c:2185 0000:01:00.1: azx_pcm_prepare: bufsize=0xe100, format=0x15
[ 56.210127] ALSA sound/pci/hda/patch_hdmi.c:678 HDMI: select CA 0xb for 6-channel allocation: FL/FR LFE FC RL/RR RC RLC/RRC
[ 56.210254] HDMI: ASP channel 0 => slot 0
[ 56.210266] HDMI: ASP channel 1 => slot 1
[ 56.210278] HDMI: ASP channel 5 => slot 2
[ 56.210290] HDMI: ASP channel 4 => slot 3
[ 56.210302] HDMI: ASP channel 2 => slot 4
[ 56.210315] HDMI: ASP channel 3 => slot 5
[ 56.210327] HDMI: ASP channel 15 => slot 6
[ 56.210339] HDMI: ASP channel 15 => slot 7
[ 56.210387] ALSA sound/pci/hda/patch_hdmi.c:3110 atihdmi_pin_hbr_setup: NID=0x3, hbr-ctl=0x1
[ 56.210389] ALSA sound/pci/hda/hda_codec.c:1646 hda_codec_setup_stream: NID=0x2, stream=0x1, channel=0, format=0x15
[ 56.210403] ALSA sound/pci/hda/hda_intel.c:2185 0000:01:00.1: azx_pcm_prepare: bufsize=0xe100, format=0x15
[ 56.210409] ALSA sound/pci/hda/patch_hdmi.c:678 HDMI: select CA 0xb for 6-channel allocation: FL/FR LFE FC RL/RR RC RLC/RRC
[ 56.210534] HDMI: ASP channel 0 => slot 0
[ 56.210546] HDMI: ASP channel 1 => slot 1
[ 56.210558] HDMI: ASP channel 5 => slot 2
[ 56.210570] HDMI: ASP channel 4 => slot 3
[ 56.210582] HDMI: ASP channel 2 => slot 4
[ 56.210595] HDMI: ASP channel 3 => slot 5
[ 56.210607] HDMI: ASP channel 15 => slot 6
[ 56.210619] HDMI: ASP channel 15 => slot 7
[ 56.210654] ALSA sound/pci/hda/patch_hdmi.c:3110 atihdmi_pin_hbr_setup: NID=0x3, hbr-ctl=0x1
[ 56.210656] ALSA sound/pci/hda/hda_codec.c:1646 hda_codec_setup_stream: NID=0x2, stream=0x1, channel=0, format=0x15
[ 71.196647] ALSA sound/pci/hda/hda_codec.c:1693 hda_codec_cleanup_stream: NID=0x2
[ 71.197277] ALSA sound/pci/hda/hda_codec.c:1693 hda_codec_cleanup_stream: NID=0x2
[ 191.271118] type=1006 audit(1386580201.178:3): pid=2374 uid=0 old auid=4294967295 new auid=1005 old ses=4294967295 new ses=2 res=1
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Xorg.0-v4.log
Type: text/x-log
Size: 54341 bytes
Desc: not available
URL: <http://lists.freedesktop.org/archives/pulseaudio-discuss/attachments/20131209/030a4829/attachment-0001.bin>
More information about the pulseaudio-discuss
mailing list