[pulseaudio-discuss] [RFCv3 09/43] bluetooth: Implement org.bluez.MediaEndpoint1.SelectConfiguration()
jprvita at gmail.com
jprvita at gmail.com
Fri Sep 13 16:34:16 PDT 2013
From: João Paulo Rechi Vita <jprvita at openbossa.org>
---
src/Makefile.am | 3 +-
src/modules/bluetooth/bluez5-util.c | 155 +++++++++++++++++++++++++++++++++++-
2 files changed, 155 insertions(+), 3 deletions(-)
diff --git a/src/Makefile.am b/src/Makefile.am
index 214d916..baedd6f 100644
--- a/src/Makefile.am
+++ b/src/Makefile.am
@@ -2039,7 +2039,8 @@ module_bluez4_device_la_CFLAGS = $(AM_CFLAGS) $(DBUS_CFLAGS) $(SBC_CFLAGS)
# Bluetooth BlueZ 5 sink / source
libbluez5_util_la_SOURCES = \
modules/bluetooth/bluez5-util.c \
- modules/bluetooth/bluez5-util.h
+ modules/bluetooth/bluez5-util.h \
+ modules/bluetooth/a2dp-codecs.h
libbluez5_util_la_LDFLAGS = -avoid-version
libbluez5_util_la_LIBADD = $(MODULE_LIBADD) $(DBUS_LIBS)
libbluez5_util_la_CFLAGS = $(AM_CFLAGS) $(DBUS_CFLAGS)
diff --git a/src/modules/bluetooth/bluez5-util.c b/src/modules/bluetooth/bluez5-util.c
index b0d3864..42ae71d 100644
--- a/src/modules/bluetooth/bluez5-util.c
+++ b/src/modules/bluetooth/bluez5-util.c
@@ -408,6 +408,48 @@ fail:
return DBUS_HANDLER_RESULT_NOT_YET_HANDLED;
}
+static uint8_t a2dp_default_bitpool(uint8_t freq, uint8_t mode) {
+ /* These bitpool values were chosen based on the A2DP spec recommendation */
+ switch (freq) {
+ case SBC_SAMPLING_FREQ_16000:
+ case SBC_SAMPLING_FREQ_32000:
+ return 53;
+
+ case SBC_SAMPLING_FREQ_44100:
+
+ switch (mode) {
+ case SBC_CHANNEL_MODE_MONO:
+ case SBC_CHANNEL_MODE_DUAL_CHANNEL:
+ return 31;
+
+ case SBC_CHANNEL_MODE_STEREO:
+ case SBC_CHANNEL_MODE_JOINT_STEREO:
+ return 53;
+ }
+
+ pa_log_warn("Invalid channel mode %u", mode);
+ return 53;
+
+ case SBC_SAMPLING_FREQ_48000:
+
+ switch (mode) {
+ case SBC_CHANNEL_MODE_MONO:
+ case SBC_CHANNEL_MODE_DUAL_CHANNEL:
+ return 29;
+
+ case SBC_CHANNEL_MODE_STEREO:
+ case SBC_CHANNEL_MODE_JOINT_STEREO:
+ return 51;
+ }
+
+ pa_log_warn("Invalid channel mode %u", mode);
+ return 51;
+ }
+
+ pa_log_warn("Invalid sampling freq %u", freq);
+ return 53;
+}
+
const char *pa_bluetooth_profile_to_string(pa_bluetooth_profile_t profile) {
switch(profile) {
case PA_BLUETOOTH_PROFILE_A2DP_SINK:
@@ -588,11 +630,120 @@ fail2:
}
static DBusMessage *endpoint_select_configuration(DBusConnection *conn, DBusMessage *m, void *userdata) {
+ pa_bluetooth_discovery *y = userdata;
+ a2dp_sbc_t *cap, config;
+ uint8_t *pconf = (uint8_t *) &config;
+ int i, size;
DBusMessage *r;
+ DBusError err;
- pa_assert_se(r = dbus_message_new_error(m, BLUEZ_MEDIA_ENDPOINT_INTERFACE ".Error.NotImplemented",
- "Method not implemented"));
+ static const struct {
+ uint32_t rate;
+ uint8_t cap;
+ } freq_table[] = {
+ { 16000U, SBC_SAMPLING_FREQ_16000 },
+ { 32000U, SBC_SAMPLING_FREQ_32000 },
+ { 44100U, SBC_SAMPLING_FREQ_44100 },
+ { 48000U, SBC_SAMPLING_FREQ_48000 }
+ };
+
+ dbus_error_init(&err);
+
+ if (!dbus_message_get_args(m, &err, DBUS_TYPE_ARRAY, DBUS_TYPE_BYTE, &cap, &size, DBUS_TYPE_INVALID)) {
+ pa_log_error("Endpoint SelectConfiguration(): %s", err.message);
+ dbus_error_free(&err);
+ goto fail;
+ }
+
+ if (size != sizeof(config)) {
+ pa_log_error("Capabilities array has invalid size");
+ goto fail;
+ }
+
+ pa_zero(config);
+
+ /* Find the lowest freq that is at least as high as the requested sampling rate */
+ for (i = 0; (unsigned) i < PA_ELEMENTSOF(freq_table); i++)
+ if (freq_table[i].rate >= y->core->default_sample_spec.rate && (cap->frequency & freq_table[i].cap)) {
+ config.frequency = freq_table[i].cap;
+ break;
+ }
+ if ((unsigned) i == PA_ELEMENTSOF(freq_table)) {
+ for (--i; i >= 0; i--) {
+ if (cap->frequency & freq_table[i].cap) {
+ config.frequency = freq_table[i].cap;
+ break;
+ }
+ }
+
+ if (i < 0) {
+ pa_log_error("Not suitable sample rate");
+ goto fail;
+ }
+ }
+
+ pa_assert((unsigned) i < PA_ELEMENTSOF(freq_table));
+
+ if (y->core->default_sample_spec.channels <= 1)
+ if (cap->channel_mode & SBC_CHANNEL_MODE_MONO)
+ config.channel_mode = SBC_CHANNEL_MODE_MONO;
+
+ if (y->core->default_sample_spec.channels >= 2) {
+ if (cap->channel_mode & SBC_CHANNEL_MODE_JOINT_STEREO)
+ config.channel_mode = SBC_CHANNEL_MODE_JOINT_STEREO;
+ else if (cap->channel_mode & SBC_CHANNEL_MODE_STEREO)
+ config.channel_mode = SBC_CHANNEL_MODE_STEREO;
+ else if (cap->channel_mode & SBC_CHANNEL_MODE_DUAL_CHANNEL)
+ config.channel_mode = SBC_CHANNEL_MODE_DUAL_CHANNEL;
+ else if (cap->channel_mode & SBC_CHANNEL_MODE_MONO)
+ config.channel_mode = SBC_CHANNEL_MODE_MONO;
+ else {
+ pa_log_error("No supported channel modes");
+ goto fail;
+ }
+ }
+
+ if (cap->block_length & SBC_BLOCK_LENGTH_16)
+ config.block_length = SBC_BLOCK_LENGTH_16;
+ else if (cap->block_length & SBC_BLOCK_LENGTH_12)
+ config.block_length = SBC_BLOCK_LENGTH_12;
+ else if (cap->block_length & SBC_BLOCK_LENGTH_8)
+ config.block_length = SBC_BLOCK_LENGTH_8;
+ else if (cap->block_length & SBC_BLOCK_LENGTH_4)
+ config.block_length = SBC_BLOCK_LENGTH_4;
+ else {
+ pa_log_error("No supported block lengths");
+ goto fail;
+ }
+
+ if (cap->subbands & SBC_SUBBANDS_8)
+ config.subbands = SBC_SUBBANDS_8;
+ else if (cap->subbands & SBC_SUBBANDS_4)
+ config.subbands = SBC_SUBBANDS_4;
+ else {
+ pa_log_error("No supported subbands");
+ goto fail;
+ }
+
+ if (cap->allocation_method & SBC_ALLOCATION_LOUDNESS)
+ config.allocation_method = SBC_ALLOCATION_LOUDNESS;
+ else if (cap->allocation_method & SBC_ALLOCATION_SNR)
+ config.allocation_method = SBC_ALLOCATION_SNR;
+
+ config.min_bitpool = (uint8_t) PA_MAX(MIN_BITPOOL, cap->min_bitpool);
+ config.max_bitpool = (uint8_t) PA_MIN(a2dp_default_bitpool(config.frequency, config.channel_mode), cap->max_bitpool);
+
+ if (config.min_bitpool > config.max_bitpool)
+ goto fail;
+
+ pa_assert_se(r = dbus_message_new_method_return(m));
+ pa_assert_se(dbus_message_append_args(r, DBUS_TYPE_ARRAY, DBUS_TYPE_BYTE, &pconf, size, DBUS_TYPE_INVALID));
+
+ return r;
+
+fail:
+ pa_assert_se(r = dbus_message_new_error(m, "org.bluez.Error.InvalidArguments", "Unable to select configuration"));
return r;
}
--
1.8.3.1
More information about the pulseaudio-discuss
mailing list