[pulseaudio-discuss] Pulse Audio Configuration
Sean McCully
sean_mccully at yahoo.com
Sat Feb 22 18:09:38 PST 2014
I am trying to figure out if possible to configure pulse audio so that I can output 5.1
sound through 3 audio jacks.
I have an ASRock Game Blaster that came with my Mobo,
http://www.asrock.com/microsite/intelx79/GameBlaster.html
The sink that Pulseaudio creates at boot looks like this <see below>, is there a way to
configure 5.1 Surround Sound that would use 3 Analog audio jacks? With this sound
card? With Pulse Audio?
* index: 1
name: <alsa_output.pci-0000_00_1b.0.analog-stereo>
driver: <module-alsa-card.c>
flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY
FLAT_VOLUME DYNAMIC_LATENCY
state: SUSPENDED
suspend cause: IDLE
priority: 9959
volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
balance 0.00
base volume: 46396 / 71% / -9.00 dB
volume steps: 65537
muted: no
current latency: 0.00 ms
max request: 0 KiB
max rewind: 0 KiB
monitor source: 1
sample spec: s16le 2ch 44100Hz
channel map: front-left,front-right
Stereo
used by: 0
linked by: 0
configured latency: 0.00 ms; range is 0.50 .. 2000.00 ms
card: 1 <alsa_card.pci-0000_00_1b.0>
module: 7
properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "CA0132 Analog"
alsa.id = "CA0132 Analog"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "0"
alsa.card_name = "HDA Intel PCH"
alsa.long_card_name = "HDA Intel PCH at 0xfbb00000 irq 92"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1b.0"
sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "1d20"
device.product.name = "C600/X79 series chipset High Definition Audio
Controller"
device.form_factor = "internal"
device.string = "front:0"
device.buffering.buffer_size = "352800"
device.buffering.fragment_size = "176400"
device.access_mode = "mmap+timer"
device.profile.name = "analog-stereo"
device.profile.description = "Analog Stereo"
device.description = "Built-in Audio Analog Stereo"
alsa.mixer_name = "Creative CA0132"
alsa.components = "HDA:11020011,18490010,00100918"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
ports:
analog-output: Analog Output (priority 9900, latency offset 0 usec, available:
unknown)
properties:
analog-output-lineout: Line Out (priority 9900, latency offset 0 usec,
available: no)
properties:
analog-output-headphones: Headphones (priority 9000, latency offset 0
usec, available: yes)
properties:
device.icon_name = "audio-headphones"
active port: <analog-output>
--
-- Sean McCully
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freedesktop.org/archives/pulseaudio-discuss/attachments/20140222/4d18e120/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 230 bytes
Desc: This is a digitally signed message part.
URL: <http://lists.freedesktop.org/archives/pulseaudio-discuss/attachments/20140222/4d18e120/attachment-0001.pgp>
More information about the pulseaudio-discuss
mailing list