[pulseaudio-discuss] redirect sound to different out jack
sabayon11
sabayon11 at gmail.com
Sun Nov 23 10:17:58 PST 2014
http://pastebin.com/NnDvQ2kU
>Do pactl can select the capture source?
I don't know what specific command shold I use.
> Which devices do you want to use? Those Multichannel's I had when I
disabled pulse.
Hmmm. Now I use surround 4.0
http://i.imgur.com/UZsnWqs.png
but whatever is needed to accomplish it.
2014-11-23 17:11 GMT+01:00 Raymond Yau <superquad.vortex2 at gmail.com>:
>
> Need the hw params of surround40 similar to
>
> https://bugs.freedesktop.org/show_bug.cgi?id=84804#c17
>
> >
> > What I noticed is that even if I disable pulseaudio and play only with
> kmix sliders there is the same situation.
> >http://i.imgur.com/497ClHc.png
> >http://i.imgur.com/ixClsH2.png
> > Now I enebled it again.
> > I guess the reason is that when I use rear line out (surround option)
> and want to use TV (line in) there is no input devices in pulse audio
> volume control - the tab shows that there are no active devices.
> >
>
> Post the output of
>
> pactl list
>
> AFAIK, pulseaudio don't touch those playback volume/switches of sources in
> capture source control (mic playback volume, line in playback volume,....
>
> control.64 {
> iface MIXER
> name 'Capture Source'
> value.0 Mic
> value.1 Mic
> comment {
> access 'read write'
> type ENUMERATED
> count 2
> item.0 Mic
> item.1 CD
> item.2 Video
> item.3 Aux
> item.4 Line
> item.5 Mix
> item.6 'Mix Mono'
> item.7 Phone
> }
> }
>
>
> http://cgit.freedesktop.org/pulseaudio/pulseaudio/tree/src/modules/alsa/mixer/paths
>
> pulseaudio only implement a few source in capture source control of ac97
> codec and the existing algorithm does not save and restore the selected
> source of capture control of ac97 codec at shutdown or startup of
> pulseaudio server
>
> This mean capture source is always the default value of record select
> register of ac97 codec after codec reset
>
> Do pactl can select the capture source?
>
> > I found some information
> >http://i.imgur.com/anqw0JX.png
> >http://i.imgur.com/n9kogZl.png
> >
> >
>
> Pulseaudio use most of the devices defined in emu10k1.conf except rear and
> clfe
> (i.e. playback and capture device 0 )
>
>
> Which devices do you want to use?
>
> card 0: Live [SB Live! Value [CT4832]], device 2: emu10k1 efx
> [Multichannel Capture/PT Playback]
> Subdevices: 8/8
> Subdevice #0: subdevice #0
> Subdevice #1: subdevice #1
> Subdevice #2: subdevice #2
> Subdevice #3: subdevice #3
> Subdevice #4: subdevice #4
> Subdevice #5: subdevice #5
> Subdevice #6: subdevice #6
> Subdevice #7: subdevice #7
>
> card 0: Live [SB Live! Value [CT4832]], device 3: emu10k1 [Multichannel
> Playback]
> Subdevices: 1/1
> Subdevice #0: subdevice #0
>
> ARECORD
>
> **** List of CAPTURE Hardware Devices ****
>
> card 0: Live [SB Live! Value [CT4832]], device 1: emu10k1 mic [Mic Capture]
> Subdevices: 1/1
> Subdevice #0: subdevice #0
>
> card 0: Live [SB Live! Value [CT4832]], device 2: emu10k1 efx
> [Multichannel Capture/PT Playback]
> Subdevices: 1/1
> Subdevice #0: subdevice #0
>
>
> _______________________________________________
> pulseaudio-discuss mailing list
> pulseaudio-discuss at lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/pulseaudio-discuss
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freedesktop.org/archives/pulseaudio-discuss/attachments/20141123/83da3422/attachment-0001.html>
More information about the pulseaudio-discuss
mailing list