[pulseaudio-discuss] PulseAudio, switch audio output on device connection

[Tanu Kaskinen]

On Mon, 2014-10-06 at 12:39 +0200, Mark Gaiser wrote:
> On Mon, Oct 6, 2014 at 12:35 PM, Tanu Kaskinen
> <tanu.kaskinen at linux.intel.com> wrote:
> > On Thu, 2014-10-02 at 13:41 +0200, Mark Gaiser wrote:
> >> On Thu, Oct 2, 2014 at 11:04 AM, Tanu Kaskinen
> >> <tanu.kaskinen at linux.intel.com> wrote:
> >> > On Sun, 2014-09-28 at 21:16 +0200, Mark Gaiser wrote:
> >> >> Hi PulseAudio list,
> >> >>
> >> >> Note: please keep me in CC, i'm not registered on this list.
> >> >>
> >> >> I've been having this issue for as long as i use Linux (with
> >> >> pulseaudio) but never really bothered to look into the issue and try
> >> >> to resolve it. That's something i've been trying to tackle for a few
> >> >> days now without any notable success.
> >> >>
> >> >> First to clear make my use case clear.
> >> >> - I have a USB headset (but the same is true for jack).
> >> >> - On windows and mac, whenever i plug in a headset (usb or jack) all
> >> >> audio is redirected to that device.
> >> >>
> >> >> My linux setup:
> >> >> - Archlinux x64 (fully up to date)
> >> >> - KDE 4.xx
> >> >>
> >> >> What i want to accomplish is to have the same hassle free use case on
> >> >> linux as it works on windows and mac. My (fairly default) default.pa
> >> >> can be found here [1]. The only things i added (as far as i can
> >> >> remember) is:
> >> >> # automatically switch to newly-connected devices
> >> >> load-module module-switch-on-connect
> >> >>
> >> >> Which i did because it "looked" like the thing i needed based on one
> >> >> of the comments in [2]. It doesn't seem to do anything for me though.
> >> >>
> >> >> So how do i let PulseAudio redirect all audio output to (the last)
> >> >> audio device that i connected to it? Just like it works on Windows and
> >> >> Mac? I mean, i can change output sinks in pavucontrol, but that is
> >> >> hardly a sane way to do every time. There must be "some" easy way out
> >> >> there to do this, right?
> >> >>
> >> >> Also, it would be very nice of the audio switched sink while audio is playing.
> >> >>
> >> >> I prefer doing this using just default pulseaudio and linux commands.
> >> >> I know of the "paswitch" git project somewhere that allows me to
> >> >> switch output devices, but i don't believe that's the right way to do
> >> >> something like this.
> >> >>
> >> >> I hope this list could share the appropriate way in getting this done.
> >> >>
> >> >> For reference, i tried the same use case in Ubuntu, Kubuntu and Magaia
> >> >> (plug in a headset, play music and listen where the sound comes from).
> >> >> In all cases no sound was coming out of my headset. All sound came out
> >> >> of the speakers (that are connected via a jack plug).
> >> >
> >> > I don't know why it's not working for you, but here's some information
> >> > that may help with figuring it out.
> >> >
> >> > The first thing to note is that USB headsets and headphones that are
> >> > plugged into an audio jack are handled differently.
> >> >
> >> > The policy of moving streams to a newly plugged-in USB headset is
> >> > handled by module-switch-on-connect. That module changes the default
> >> > sink to a newly plugged-in sound card, and moves streams if and only if
> >> > the following conditions are fulfilled: the stream is currently playing
> >> > to the sink that was the old default sink, and you have not previously
> >> > explicitly moved the stream.
> >> >
> >> > The policy of switching to the headphones when you plug them to an audio
> >> > jack is handled by module-switch-on-port-available. That module never
> >> > moves streams. Instead, it just switches the port on the sink that has
> >> > the headphone port. I don't know the details of your setup, but if the
> >> > jack to which you have connected the speakers is part of a different
> >> > sink than the one that handles the headphone jack, then audio won't
> >> > automatically move to the headphones.
> >> >
> >> > The above is a description how things are, not necessarily of they
> >> > should be.
> >> >
> >> > --
> >> > Tanu
> >> >
> >>
> >> Hi Tanu,
> >>
> >> Thank you very much for your reply. For the moment, lets focus on the
> >> case where a USB headset is plugged in.
> >> In my current case (with live cd's/dvd's and a natively installed
> >> archlinux) where the case is: (for clarity):
> >> - Play some music using some pulseaudio enabled player
> >> - Sound comes out of the speakers (jack connection)
> >> - Plug in a USB headset
> >> - Sound is still being send to the connected speakers (jack) and not
> >> the newly attached headphone (usb)
> >>
> >> This is repeatable for me on a multitude of distributions, even with
> >> completely different hardware (same usb headset every time).
> >>
> >> Therefore i doubt a fault in my configurations since i would expect
> >> distributions like magaia, ubuntu and kubuntu to have this sorted out
> >> of the box. Anyway, for reference, my settings again:
> >> http://pastebin.com/NL7hbvS6
> >>
> >> Is there any test i can run to debug this issue and figure out where
> >> things go wrong?
> >
> > I don't think there's any simple test. You could add logging to the
> > sink_put_hook_callback() function in module-switch-on-connect.c for
> > every case where the function decides to return without moving streams,
> > and then see from the log why the moving is not happening.
> 
> Just wondering, can you reproduce this issue?

I tried now, and no, I couldn't reproduce. I installed PulseAudio from
current git master, started to play music with Rhythmbox, ran "pactl
load-module module-switch-on-connect", and plugged in a USB headset. The
music moved to the headset automatically.

-- 
Tanu