[pulseaudio-discuss] Need help with Behringer Firepower FCA610 profile

Takashi Sakamoto o-takashi at sakamocchi.jp
Tue Jun 23 22:34:42 PDT 2015


Hi,
(C.C.ed to David Henningsson)

On Jun 24 2015 13:03, Benjamin Tegge wrote:
> Hello Rene,
>
> I also use the FCA610, but I don't really understand what you want the
> profile to do for you.
>
> Regards, Benjamin
>
> Am 23.06.2015 7:10 nachm. schrieb "Rene Bartsch" <ml at bartschnet.de
> <mailto:ml at bartschnet.de>>:
>
>     Hi,
>
>     I'm new to this mailing-list, so a "Hello" to all! ;)
>
>     The Behringer Firepower FCA610 Audio-Interface lacks a
>     Pulseaudio-profile. Please help me to create one.
>
>     Working UDEV-rule:
>
>     --------------------------------------------------- snip
>     ---------------------------------------------------
>     # Behringer FCA610
>     ATTRS{idVendor}=="1397", ATTRS{idProduct}=="0003",
>     ENV{PULSE_PROFILE_SET}="behringer-firepower-fca610.conf"
>     --------------------------------------------------- snap
>     ---------------------------------------------------
>
>     Connectivity:
>     - Firewire
>     - USB (my case)
>
>
>     Channels:
>     - source-channel 0: Analogue Microphone-In/Instrument-In (Left)
>     with manual input level control
>     - source-channel 1: Analogue Microphone-In/Instrument-In (Right)
>     with manual input level control
>     - source-channel 2: Analogue Line-In (Left)
>     - source-channel 3: Analogue Line-In (Right)
>     - source-channel 4: IEC958-In Left
>     - source-channel 5: IEC958-In Right
>
>     - sink-channel   0: Analogue Line-Out/Headphone A/Headphone B
>     (Front-Left)
>     - sink-channel   1: Analogue Line-Out/Headphone A/Headphone B
>     (Front-Right)
>     - sink-channel   2: Analogue Line-Out/Headphone B (Rear-Left)
>     - sink-channel   3: Analogue Line-Out/Headphone B (Rear-Right)
>     - sink-channel   4: Analogue Line-Out (Center)
>     - sink-channel   5: Analogue Line-Out (LFE)
>     - sink-channel   6: Analogue Line-Out (Side-Left)
>     - sink-channel   7: Analogue Line-Out (Side-Right)
>     - sink-channel   8: IEC958-Out Left
>     - sink-channel   9: IEC958-Out Right
>
>     - Midi-In AND Midi-Out
>
>     - Headphone B can be switched between channels 0/1 and channels 2/3
>     - Main volume-control-knob can be switched between channels 0/1
>     (Stereo) and channels 0-7 (Surround 7.1)
>
>
>     Brochure: http://www.behringer.com/assets/FCA610_FCA1616_WebBrochure.pdf
>
>
>     Thanx for any help,
>
>     Renne

I also have this model, and know this model has different number of PCM 
channels for its playback/capture. There's a lack of his explaination, 
but I can imagine that:

  * When the device plugging in, PulseAudio adds no sinks/sources for it.
  * So he judge a lack of the 'profile' is a cause of this issue.
  * Then he tries to apply custom profile for the device.

Certainly, PulseAudio 4.0 or former don't add sink/source for such 
devices. Furthermore, PulseAudio 6.0 has a bug to manage to apply the 
same profiles to both sink/source. (This bug was already fixed in 
current master.)

He loops to add a workaround for this issue to the former PulseAudio 
versions. Is it your aim of this message, Rene?


Regards

Takashi Sakamoto


More information about the pulseaudio-discuss mailing list