[pulseaudio-discuss] Can't get Pulseadio to playback stream on Raspbian with HifiBerry DAC+

Sun Mar 22 23:19:28 PDT 2015

Did a fresh install. Only changed default.pa to load the RTP stream module.

Modified asound.conf to look like this

pcm.pulse {
    type pulse
}

ctl.pulse {
    type pulse
}

pcm.!default {
    type pulse
}
ctl.!default {
    type pulse
}

Here's the stereo section from my default.conf profile

[Mapping analog-stereo]
device-strings = front:%f hw:%f
channel-map = left,right
paths-output = analog-output analog-output-speaker
analog-output-desktop-speaker analog-output-headphones
analog-output-headphones-2
paths-input = analog-input-front-mic analog-input-rear-mic
analog-input-internal-mic analog-input-dock-mic analog-input
analog-input-mic analog-input-linein analog-input-aux analog-input-video
ana$
priority = 10

Still no audio.

Here's my pulseaudio -vvv output.

pi at musicplayer1 ~ $ pulseaudio -vvv
I: [pulseaudio] main.c: setrlimit(RLIMIT_NICE, (31, 31)) failed: Operation
not permitted
D: [pulseaudio] core-rtclock.c: Timer slack is set to 50 us.
I: [pulseaudio] core-util.c: Failed to acquire high-priority scheduling:
Permission denied
I: [pulseaudio] main.c: This is PulseAudio 2.0
D: [pulseaudio] main.c: Compilation host: arm-unknown-linux-gnueabihf
D: [pulseaudio] main.c: Compilation CFLAGS: -g -O2 -fstack-protector
--param=ssp-buffer-size=4 -Wformat -Werror=format-security -Wall -W -Wextra
-pipe -Wno-long-long -Wvla -Wno-overlength-strings
-Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wlogical-op -Wsign-compare
-Wformat-security -Wmissing-include-dirs -Wformat-nonliteral
-Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal
-Wmissing-prototypes -Wredundant-decls -Wmissing-declarations
-Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing
-Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2
-fno-common -fdiagnostics-show-option
D: [pulseaudio] main.c: Running on host: Linux armv6l 3.18.7+ #755 PREEMPT
Thu Feb 12 17:14:31 GMT 2015
D: [pulseaudio] main.c: Found 1 CPUs.
I: [pulseaudio] main.c: Page size is 4096 bytes
D: [pulseaudio] main.c: Compiled with Valgrind support: no
D: [pulseaudio] main.c: Running in valgrind mode: no
D: [pulseaudio] main.c: Running in VM: no
D: [pulseaudio] main.c: Optimized build: yes
D: [pulseaudio] main.c: FASTPATH defined, only fast path asserts disabled.
I: [pulseaudio] main.c: Machine ID is eae5fe1648c5902fa7c038f954e1edbf.
I: [pulseaudio] main.c: Using runtime directory
/home/pi/.pulse/eae5fe1648c5902fa7c038f954e1edbf-runtime.
I: [pulseaudio] main.c: Using state directory /home/pi/.pulse.
I: [pulseaudio] main.c: Using modules directory /usr/lib/pulse-2.0/modules.
I: [pulseaudio] main.c: Running in system mode: no
W: [pulseaudio] pid.c: Stale PID file, overwriting.
I: [pulseaudio] main.c: Fresh high-resolution timers available! Bon appetit!
D: [pulseaudio] memblock.c: Using shared memory pool with 1024 slots of
size 64.0 KiB each, total size is 64.0 MiB, maximum usable slot size is
65496
I: [pulseaudio] cpu-arm.c: CPU flags: V6 V7 VFP EDSP
I: [pulseaudio] svolume_arm.c: Initialising ARM optimized volume functions.
D: [pulseaudio] database-tdb.c: Opened TDB database
'/home/pi/.pulse/eae5fe1648c5902fa7c038f954e1edbf-device-volumes.tdb'
I: [pulseaudio] module-device-restore.c: Successfully opened database file
'/home/pi/.pulse/eae5fe1648c5902fa7c038f954e1edbf-device-volumes'.
I: [pulseaudio] module.c: Loaded "module-device-restore" (index: #0;
argument: "").
D: [pulseaudio] database-tdb.c: Opened TDB database
'/home/pi/.pulse/eae5fe1648c5902fa7c038f954e1edbf-stream-volumes.tdb'
I: [pulseaudio] module-stream-restore.c: Successfully opened database file
'/home/pi/.pulse/eae5fe1648c5902fa7c038f954e1edbf-stream-volumes'.
D: [pulseaudio] protocol-dbus.c: Interface
org.PulseAudio.Ext.StreamRestore1 added for object
/org/pulseaudio/stream_restore1
D: [pulseaudio] protocol-dbus.c: Interface
org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object
/org/pulseaudio/stream_restore1/entry0
I: [pulseaudio] module.c: Loaded "module-stream-restore" (index: #1;
argument: "").
D: [pulseaudio] database-tdb.c: Opened TDB database
'/home/pi/.pulse/eae5fe1648c5902fa7c038f954e1edbf-card-database.tdb'
I: [pulseaudio] module-card-restore.c: Successfully opened database file
'/home/pi/.pulse/eae5fe1648c5902fa7c038f954e1edbf-card-database'.
I: [pulseaudio] module.c: Loaded "module-card-restore" (index: #2;
argument: "").
I: [pulseaudio] module.c: Loaded "module-augment-properties" (index: #3;
argument: "").
D: [pulseaudio] cli-command.c: Checking for existence of
'/usr/lib/pulse-2.0/modules/module-udev-detect.so': success
D: [pulseaudio] module-udev-detect.c: /dev/snd/controlC0 is accessible: yes
D: [pulseaudio] module-udev-detect.c: /devices/sound/sound/card0 is busy: no
D: [pulseaudio] module-udev-detect.c: Loading module-alsa-card with
arguments 'device_id="0" name="platform-sound"
card_name="alsa_card.platform-sound" namereg_fail=false tsched=yes
fixed_latency_range=no ignore_dB=no deferred_volume=yes
card_properties="module-udev-detect.discovered=1"'
D: [pulseaudio] reserve-wrap.c: Unable to contact D-Bus session bus:
org.freedesktop.DBus.Error.NotSupported: Unable to autolaunch a dbus-daemon
without a $DISPLAY for X11
D: [pulseaudio] alsa-mixer.c: Looking at profile output:analog-mono
D: [pulseaudio] alsa-mixer.c: Checking for playback on Analog Mono
(analog-mono)
D: [pulseaudio] alsa-util.c: Trying hw:0 with SND_PCM_NO_AUTO_FORMAT ...
D: [pulseaudio] alsa-util.c: Managed to open hw:0
D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(1) failed:
Invalid argument
D: [pulseaudio] alsa-util.c: Trying hw:0 without SND_PCM_NO_AUTO_FORMAT ...
D: [pulseaudio] alsa-util.c: Managed to open hw:0
D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(1) failed:
Invalid argument
D: [pulseaudio] alsa-util.c: Trying plug:hw:0 with SND_PCM_NO_AUTO_FORMAT
...
D: [pulseaudio] alsa-util.c: Managed to open plug:hw:0
D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(1) failed:
Invalid argument
D: [pulseaudio] alsa-util.c: Trying plug:hw:0 without
SND_PCM_NO_AUTO_FORMAT ...
D: [pulseaudio] alsa-util.c: Managed to open plug:hw:0
D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(1) failed:
Invalid argument
I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on
plug:hw:0: Invalid argument
D: [pulseaudio] alsa-mixer.c: Looking at profile
output:analog-mono+input:analog-mono
D: [pulseaudio] alsa-mixer.c: Checking for playback on Analog Mono
(analog-mono)
D: [pulseaudio] alsa-util.c: Trying hw:0 with SND_PCM_NO_AUTO_FORMAT ...
D: [pulseaudio] alsa-util.c: Managed to open hw:0
D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(1) failed:
Invalid argument
D: [pulseaudio] alsa-util.c: Trying hw:0 without SND_PCM_NO_AUTO_FORMAT ...
D: [pulseaudio] alsa-util.c: Managed to open hw:0
D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(1) failed:
Invalid argument
D: [pulseaudio] alsa-util.c: Trying plug:hw:0 with SND_PCM_NO_AUTO_FORMAT
...
D: [pulseaudio] alsa-util.c: Managed to open plug:hw:0
D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(1) failed:
Invalid argument
D: [pulseaudio] alsa-util.c: Trying plug:hw:0 without
SND_PCM_NO_AUTO_FORMAT ...
D: [pulseaudio] alsa-util.c: Managed to open plug:hw:0
D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(1) failed:
Invalid argument
I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on
plug:hw:0: Invalid argument
D: [pulseaudio] alsa-mixer.c: Looking at profile
output:analog-mono+input:analog-stereo
D: [pulseaudio] alsa-mixer.c: Checking for playback on Analog Mono
(analog-mono)
D: [pulseaudio] alsa-util.c: Trying hw:0 with SND_PCM_NO_AUTO_FORMAT ...
D: [pulseaudio] alsa-util.c: Managed to open hw:0
D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(1) failed:
Invalid argument
D: [pulseaudio] alsa-util.c: Trying hw:0 without SND_PCM_NO_AUTO_FORMAT ...
D: [pulseaudio] alsa-util.c: Managed to open hw:0
D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(1) failed:
Invalid argument
D: [pulseaudio] alsa-util.c: Trying plug:hw:0 with SND_PCM_NO_AUTO_FORMAT
...
D: [pulseaudio] alsa-util.c: Managed to open plug:hw:0
D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(1) failed:
Invalid argument
D: [pulseaudio] alsa-util.c: Trying plug:hw:0 without
SND_PCM_NO_AUTO_FORMAT ...
D: [pulseaudio] alsa-util.c: Managed to open plug:hw:0
D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(1) failed:
Invalid argument
I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on
plug:hw:0: Invalid argument
D: [pulseaudio] alsa-mixer.c: Looking at profile
output:analog-mono+input:analog-4-channel-input
D: [pulseaudio] alsa-mixer.c: Checking for playback on Analog Mono
(analog-mono)
D: [pulseaudio] alsa-util.c: Trying hw:0 with SND_PCM_NO_AUTO_FORMAT ...
D: [pulseaudio] alsa-util.c: Managed to open hw:0
D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(1) failed:
Invalid argument
D: [pulseaudio] alsa-util.c: Trying hw:0 without SND_PCM_NO_AUTO_FORMAT ...
D: [pulseaudio] alsa-util.c: Managed to open hw:0
D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(1) failed:
Invalid argument
D: [pulseaudio] alsa-util.c: Trying plug:hw:0 with SND_PCM_NO_AUTO_FORMAT
...
D: [pulseaudio] alsa-util.c: Managed to open plug:hw:0
D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(1) failed:
Invalid argument
D: [pulseaudio] alsa-util.c: Trying plug:hw:0 without
SND_PCM_NO_AUTO_FORMAT ...
D: [pulseaudio] alsa-util.c: Managed to open plug:hw:0
D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(1) failed:
Invalid argument
I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on
plug:hw:0: Invalid argument
D: [pulseaudio] alsa-mixer.c: Looking at profile
output:analog-mono+input:iec958-stereo
D: [pulseaudio] alsa-mixer.c: Checking for playback on Analog Mono
(analog-mono)
D: [pulseaudio] alsa-util.c: Trying hw:0 with SND_PCM_NO_AUTO_FORMAT ...
D: [pulseaudio] alsa-util.c: Managed to open hw:0
D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(1) failed:
Invalid argument
D: [pulseaudio] alsa-util.c: Trying hw:0 without SND_PCM_NO_AUTO_FORMAT ...
D: [pulseaudio] alsa-util.c: Managed to open hw:0
D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(1) failed:
Invalid argument
D: [pulseaudio] alsa-util.c: Trying plug:hw:0 with SND_PCM_NO_AUTO_FORMAT
...
D: [pulseaudio] alsa-util.c: Managed to open plug:hw:0
D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(1) failed:
Invalid argument
D: [pulseaudio] alsa-util.c: Trying plug:hw:0 without
SND_PCM_NO_AUTO_FORMAT ...
D: [pulseaudio] alsa-util.c: Managed to open plug:hw:0
D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(1) failed:
Invalid argument
I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on
plug:hw:0: Invalid argument
D: [pulseaudio] alsa-mixer.c: Looking at profile output:analog-stereo
D: [pulseaudio] alsa-mixer.c: Checking for playback on Analog Stereo
(analog-stereo)
D: [pulseaudio] alsa-util.c: Trying front:0 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)conf.c: Unknown parameters 0
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM front:0
I: [pulseaudio] alsa-util.c: Error opening PCM device front:0: Invalid
argument
D: [pulseaudio] alsa-util.c: Trying hw:0 with SND_PCM_NO_AUTO_FORMAT ...
D: [pulseaudio] alsa-util.c: Managed to open hw:0
D: [pulseaudio] alsa-util.c: Maximum hw buffer size is 2730 ms
D: [pulseaudio] alsa-util.c: Set buffer size first (to 4800 samples),
period size second (to 1200 samples).
D: [pulseaudio] alsa-mixer.c: Profile output:analog-stereo supported.
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0'
D: [pulseaudio] alsa-mixer.c: Probing path 'analog-output'
D: [pulseaudio] alsa-mixer.c: Probe of element 'Hardware Master' succeeded
(volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Master' succeeded
(volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Master Mono' succeeded
(volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Line HP Swap' succeeded
(volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Headphone' succeeded
(volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Headphone2' succeeded
(volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Speaker' succeeded
(volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Desktop Speaker' succeeded
(volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Front' succeeded (volume=0,
switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear' succeeded (volume=0,
switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Surround' succeeded
(volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Side' succeeded (volume=0,
switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Center' succeeded
(volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'LFE' succeeded (volume=0,
switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'PCM' succeeded (volume=1,
switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'External Amplifier'
succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Bass Boost' succeeded
(volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'IEC958' succeeded
(volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'IEC958 Optical Raw'
succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Analog Output' succeeded
(volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probing path 'analog-output-speaker'
D: [pulseaudio] alsa-mixer.c: Probe of jack 'Headphone Jack' succeeded (not
found)
D: [pulseaudio] alsa-mixer.c: Probe of element 'Hardware Master' succeeded
(volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Master' succeeded
(volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Master Mono' succeeded
(volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Headphone' succeeded
(volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Headphone2' succeeded
(volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Speaker' succeeded
(volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Desktop Speaker' succeeded
(volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Front' succeeded (volume=0,
switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Speaker' succeeded
(volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear' succeeded (volume=0,
switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Surround' succeeded
(volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Surround Speaker' succeeded
(volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Side' succeeded (volume=0,
switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Center' succeeded
(volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Center Speaker' succeeded
(volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'LFE' succeeded (volume=0,
switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'LFE Speaker' succeeded
(volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'PCM' succeeded (volume=1,
switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'External Amplifier'
succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Bass Boost' succeeded
(volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'IEC958' succeeded
(volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'IEC958 Optical Raw'
succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Analog Output' succeeded
(volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Skipping path 'analog-output-speaker', none
of required-any elements preset.
D: [pulseaudio] alsa-mixer.c: Probing path 'analog-output-speaker'
D: [pulseaudio] alsa-mixer.c: Probe of element 'Hardware Master' succeeded
(volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Master' succeeded
(volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Master Mono' succeeded
(volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Headphone' succeeded
(volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Headphone2' succeeded
(volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Speaker' succeeded
(volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Desktop Speaker' failed.
D: [pulseaudio] alsa-mixer.c: Probing path 'analog-output-headphones'
D: [pulseaudio] alsa-mixer.c: Probe of jack 'Headphone Jack' succeeded (not
found)
D: [pulseaudio] alsa-mixer.c: Probe of element 'Hardware Master' succeeded
(volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Master' succeeded
(volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Master Mono' succeeded
(volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Headphone' succeeded
(volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Line HP Swap' succeeded
(volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Headphone2' succeeded
(volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Speaker' succeeded
(volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Desktop Speaker' succeeded
(volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Front' succeeded (volume=0,
switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear' succeeded (volume=0,
switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Surround' succeeded
(volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Side' succeeded (volume=0,
switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Center' succeeded
(volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'LFE' succeeded (volume=0,
switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'PCM' succeeded (volume=1,
switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'External Amplifier'
succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Bass Boost' succeeded
(volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'IEC958' succeeded
(volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'IEC958 Optical Raw'
succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Analog Output' succeeded
(volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Skipping path 'analog-output-headphones',
none of required-any elements preset.
D: [pulseaudio] alsa-mixer.c: Probing path 'analog-output-headphones'
D: [pulseaudio] alsa-mixer.c: Probe of element 'Hardware Master' succeeded
(volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Master' succeeded
(volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Master Mono' succeeded
(volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Headphone' succeeded
(volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Headphone2' failed.
D: [pulseaudio] alsa-mixer.c: Available mixer paths (after tidying):
D: [pulseaudio] alsa-mixer.c: Path Set 0xf94ed0, direction=1
D: [pulseaudio] alsa-mixer.c: Path analog-output (Analog Output),
direction=1, priority=99, probed=yes, supported=yes, has_mute=no,
has_volume=yes, has_dB=no, min_volume=0, max_volume=215, min_dB=inf,
max_dB=-inf
D: [pulseaudio] alsa-mixer.c: Element PCM, direction=1, switch=0, volume=1,
volume_limit=-1, enumeration=0, required=0, required_any=0,
required_absent=0, mask=0x3600000000f66, n_channels=2, override_map=yes
D: [pulseaudio] alsa-mixer.c: Looking at profile
output:analog-stereo+input:analog-mono
D: [pulseaudio] alsa-mixer.c: Checking for recording on Analog Mono
(analog-mono)
D: [pulseaudio] alsa-util.c: Trying hw:0 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D0c' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device hw:0: No such file or
directory
D: [pulseaudio] alsa-mixer.c: Looking at profile
output:analog-stereo+input:analog-stereo
D: [pulseaudio] alsa-mixer.c: Checking for recording on Analog Stereo
(analog-stereo)
D: [pulseaudio] alsa-util.c: Trying front:0 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)conf.c: Unknown parameters 0
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM front:0
I: [pulseaudio] alsa-util.c: Error opening PCM device front:0: Invalid
argument
D: [pulseaudio] alsa-util.c: Trying hw:0 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D0c' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device hw:0: No such file or
directory
D: [pulseaudio] alsa-mixer.c: Looking at profile
output:analog-stereo+input:analog-4-channel-input
D: [pulseaudio] alsa-mixer.c: Checking for recording on Analog 4-channel
Input (analog-4-channel-input)
D: [pulseaudio] alsa-util.c: Trying hw:0 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D0c' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device hw:0: No such file or
directory
D: [pulseaudio] alsa-mixer.c: Looking at profile
output:analog-stereo+input:iec958-stereo
D: [pulseaudio] alsa-mixer.c: Checking for recording on Digital Stereo
(IEC958) (iec958-stereo)
D: [pulseaudio] alsa-util.c: Trying iec958:0 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)conf.c: Unknown parameters 0
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM iec958:0
I: [pulseaudio] alsa-util.c: Error opening PCM device iec958:0: Invalid
argument
D: [pulseaudio] alsa-mixer.c: Looking at profile output:analog-surround-40
D: [pulseaudio] alsa-mixer.c: Checking for playback on Analog Surround 4.0
(analog-surround-40)
D: [pulseaudio] alsa-util.c: Trying surround40:0 with
SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)conf.c: Unknown parameters 0
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM surround40:0
I: [pulseaudio] alsa-util.c: Error opening PCM device surround40:0: Invalid
argument
D: [pulseaudio] alsa-mixer.c: Looking at profile
output:analog-surround-40+input:analog-mono
D: [pulseaudio] alsa-mixer.c: Checking for playback on Analog Surround 4.0
(analog-surround-40)
D: [pulseaudio] alsa-util.c: Trying surround40:0 with
SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)conf.c: Unknown parameters 0
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM surround40:0
I: [pulseaudio] alsa-util.c: Error opening PCM device surround40:0: Invalid
argument
D: [pulseaudio] alsa-mixer.c: Looking at profile
output:analog-surround-40+input:analog-stereo
D: [pulseaudio] alsa-mixer.c: Checking for playback on Analog Surround 4.0
(analog-surround-40)
D: [pulseaudio] alsa-util.c: Trying surround40:0 with
SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)conf.c: Unknown parameters 0
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM surround40:0
I: [pulseaudio] alsa-util.c: Error opening PCM device surround40:0: Invalid
argument
D: [pulseaudio] alsa-mixer.c: Looking at profile
output:analog-surround-40+input:analog-4-channel-input
D: [pulseaudio] alsa-mixer.c: Checking for playback on Analog Surround 4.0
(analog-surround-40)
D: [pulseaudio] alsa-util.c: Trying surround40:0 with
SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)conf.c: Unknown parameters 0
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM surround40:0
I: [pulseaudio] alsa-util.c: Error opening PCM device surround40:0: Invalid
argument
D: [pulseaudio] alsa-mixer.c: Looking at profile
output:analog-surround-40+input:iec958-stereo
D: [pulseaudio] alsa-mixer.c: Checking for playback on Analog Surround 4.0
(analog-surround-40)
D: [pulseaudio] alsa-util.c: Trying surround40:0 with
SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)conf.c: Unknown parameters 0
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM surround40:0
I: [pulseaudio] alsa-util.c: Error opening PCM device surround40:0: Invalid
argument
D: [pulseaudio] alsa-mixer.c: Looking at profile output:analog-surround-41
D: [pulseaudio] alsa-mixer.c: Checking for playback on Analog Surround 4.1
(analog-surround-41)
D: [pulseaudio] alsa-util.c: Trying surround41:0 with
SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)conf.c: Unknown parameters 0
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM surround41:0
I: [pulseaudio] alsa-util.c: Error opening PCM device surround41:0: Invalid
argument
D: [pulseaudio] alsa-mixer.c: Looking at profile
output:analog-surround-41+input:analog-mono
D: [pulseaudio] alsa-mixer.c: Checking for playback on Analog Surround 4.1
(analog-surround-41)
D: [pulseaudio] alsa-util.c: Trying surround41:0 with
SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)conf.c: Unknown parameters 0
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM surround41:0
I: [pulseaudio] alsa-util.c: Error opening PCM device surround41:0: Invalid
argument
D: [pulseaudio] alsa-mixer.c: Looking at profile
output:analog-surround-41+input:analog-stereo
D: [pulseaudio] alsa-mixer.c: Checking for playback on Analog Surround 4.1
(analog-surround-41)
D: [pulseaudio] alsa-util.c: Trying surround41:0 with
SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)conf.c: Unknown parameters 0
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM surround41:0
I: [pulseaudio] alsa-util.c: Error opening PCM device surround41:0: Invalid
argument
D: [pulseaudio] alsa-mixer.c: Looking at profile
output:analog-surround-41+input:analog-4-channel-input
D: [pulseaudio] alsa-mixer.c: Checking for playback on Analog Surround 4.1
(analog-surround-41)
D: [pulseaudio] alsa-util.c: Trying surround41:0 with
SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)conf.c: Unknown parameters 0
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM surround41:0
I: [pulseaudio] alsa-util.c: Error opening PCM device surround41:0: Invalid
argument
D: [pulseaudio] alsa-mixer.c: Looking at profile
output:analog-surround-41+input:iec958-stereo
D: [pulseaudio] alsa-mixer.c: Checking for playback on Analog Surround 4.1
(analog-surround-41)
D: [pulseaudio] alsa-util.c: Trying surround41:0 with
SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)conf.c: Unknown parameters 0
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM surround41:0
I: [pulseaudio] alsa-util.c: Error opening PCM device surround41:0: Invalid
argument
D: [pulseaudio] alsa-mixer.c: Looking at profile output:analog-surround-50
D: [pulseaudio] alsa-mixer.c: Checking for playback on Analog Surround 5.0
(analog-surround-50)
D: [pulseaudio] alsa-util.c: Trying surround50:0 with
SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)conf.c: Unknown parameters 0
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM surround50:0
I: [pulseaudio] alsa-util.c: Error opening PCM device surround50:0: Invalid
argument
D: [pulseaudio] alsa-mixer.c: Looking at profile
output:analog-surround-50+input:analog-mono
D: [pulseaudio] alsa-mixer.c: Checking for playback on Analog Surround 5.0
(analog-surround-50)
D: [pulseaudio] alsa-util.c: Trying surround50:0 with
SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)conf.c: Unknown parameters 0
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM surround50:0
I: [pulseaudio] alsa-util.c: Error opening PCM device surround50:0: Invalid
argument
D: [pulseaudio] alsa-mixer.c: Looking at profile
output:analog-surround-50+input:analog-stereo
D: [pulseaudio] alsa-mixer.c: Checking for playback on Analog Surround 5.0
(analog-surround-50)
D: [pulseaudio] alsa-util.c: Trying surround50:0 with
SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)conf.c: Unknown parameters 0
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM surround50:0
I: [pulseaudio] alsa-util.c: Error opening PCM device surround50:0: Invalid
argument
D: [pulseaudio] alsa-mixer.c: Looking at profile
output:analog-surround-50+input:analog-4-channel-input
D: [pulseaudio] alsa-mixer.c: Checking for playback on Analog Surround 5.0
(analog-surround-50)
D: [pulseaudio] alsa-util.c: Trying surround50:0 with
SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)conf.c: Unknown parameters 0
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM surround50:0
I: [pulseaudio] alsa-util.c: Error opening PCM device surround50:0: Invalid
argument
D: [pulseaudio] alsa-mixer.c: Looking at profile
output:analog-surround-50+input:iec958-stereo
D: [pulseaudio] alsa-mixer.c: Checking for playback on Analog Surround 5.0
(analog-surround-50)
D: [pulseaudio] alsa-util.c: Trying surround50:0 with
SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)conf.c: Unknown parameters 0
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM surround50:0
I: [pulseaudio] alsa-util.c: Error opening PCM device surround50:0: Invalid
argument
D: [pulseaudio] alsa-mixer.c: Looking at profile output:analog-surround-51
D: [pulseaudio] alsa-mixer.c: Checking for playback on Analog Surround 5.1
(analog-surround-51)
D: [pulseaudio] alsa-util.c: Trying surround51:0 with
SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)conf.c: Unknown parameters 0
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM surround51:0
I: [pulseaudio] alsa-util.c: Error opening PCM device surround51:0: Invalid
argument
D: [pulseaudio] alsa-mixer.c: Looking at profile
output:analog-surround-51+input:analog-mono
D: [pulseaudio] alsa-mixer.c: Checking for playback on Analog Surround 5.1
(analog-surround-51)
D: [pulseaudio] alsa-util.c: Trying surround51:0 with
SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)conf.c: Unknown parameters 0
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM surround51:0
I: [pulseaudio] alsa-util.c: Error opening PCM device surround51:0: Invalid
argument
D: [pulseaudio] alsa-mixer.c: Looking at profile
output:analog-surround-51+input:analog-stereo
D: [pulseaudio] alsa-mixer.c: Checking for playback on Analog Surround 5.1
(analog-surround-51)
D: [pulseaudio] alsa-util.c: Trying surround51:0 with
SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)conf.c: Unknown parameters 0
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM surround51:0
I: [pulseaudio] alsa-util.c: Error opening PCM device surround51:0: Invalid
argument
D: [pulseaudio] alsa-mixer.c: Looking at profile
output:analog-surround-51+input:analog-4-channel-input
D: [pulseaudio] alsa-mixer.c: Checking for playback on Analog Surround 5.1
(analog-surround-51)
D: [pulseaudio] alsa-util.c: Trying surround51:0 with
SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)conf.c: Unknown parameters 0
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM surround51:0
I: [pulseaudio] alsa-util.c: Error opening PCM device surround51:0: Invalid
argument
D: [pulseaudio] alsa-mixer.c: Looking at profile
output:analog-surround-51+input:iec958-stereo
D: [pulseaudio] alsa-mixer.c: Checking for playback on Analog Surround 5.1
(analog-surround-51)
D: [pulseaudio] alsa-util.c: Trying surround51:0 with
SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)conf.c: Unknown parameters 0
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM surround51:0
I: [pulseaudio] alsa-util.c: Error opening PCM device surround51:0: Invalid
argument
D: [pulseaudio] alsa-mixer.c: Looking at profile output:analog-surround-71
D: [pulseaudio] alsa-mixer.c: Checking for playback on Analog Surround 7.1
(analog-surround-71)
D: [pulseaudio] alsa-util.c: Trying surround71:0 with
SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)conf.c: Unknown parameters 0
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM surround71:0
I: [pulseaudio] alsa-util.c: Error opening PCM device surround71:0: Invalid
argument
D: [pulseaudio] alsa-mixer.c: Looking at profile
output:analog-surround-71+input:analog-mono
D: [pulseaudio] alsa-mixer.c: Checking for playback on Analog Surround 7.1
(analog-surround-71)
D: [pulseaudio] alsa-util.c: Trying surround71:0 with
SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)conf.c: Unknown parameters 0
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM surround71:0
I: [pulseaudio] alsa-util.c: Error opening PCM device surround71:0: Invalid
argument
D: [pulseaudio] alsa-mixer.c: Looking at profile
output:analog-surround-71+input:analog-stereo
D: [pulseaudio] alsa-mixer.c: Checking for playback on Analog Surround 7.1
(analog-surround-71)
D: [pulseaudio] alsa-util.c: Trying surround71:0 with
SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)conf.c: Unknown parameters 0
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM surround71:0
I: [pulseaudio] alsa-util.c: Error opening PCM device surround71:0: Invalid
argument
D: [pulseaudio] alsa-mixer.c: Looking at profile
output:analog-surround-71+input:analog-4-channel-input
D: [pulseaudio] alsa-mixer.c: Checking for playback on Analog Surround 7.1
(analog-surround-71)
D: [pulseaudio] alsa-util.c: Trying surround71:0 with
SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)conf.c: Unknown parameters 0
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM surround71:0
I: [pulseaudio] alsa-util.c: Error opening PCM device surround71:0: Invalid
argument
D: [pulseaudio] alsa-mixer.c: Looking at profile
output:analog-surround-71+input:iec958-stereo
D: [pulseaudio] alsa-mixer.c: Checking for playback on Analog Surround 7.1
(analog-surround-71)
D: [pulseaudio] alsa-util.c: Trying surround71:0 with
SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)conf.c: Unknown parameters 0
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM surround71:0
I: [pulseaudio] alsa-util.c: Error opening PCM device surround71:0: Invalid
argument
D: [pulseaudio] alsa-mixer.c: Looking at profile output:iec958-stereo
D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Stereo
(IEC958) (iec958-stereo)
D: [pulseaudio] alsa-util.c: Trying iec958:0 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)conf.c: Unknown parameters 0
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM iec958:0
I: [pulseaudio] alsa-util.c: Error opening PCM device iec958:0: Invalid
argument
D: [pulseaudio] alsa-mixer.c: Looking at profile
output:iec958-stereo+input:analog-mono
D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Stereo
(IEC958) (iec958-stereo)
D: [pulseaudio] alsa-util.c: Trying iec958:0 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)conf.c: Unknown parameters 0
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM iec958:0
I: [pulseaudio] alsa-util.c: Error opening PCM device iec958:0: Invalid
argument
D: [pulseaudio] alsa-mixer.c: Looking at profile
output:iec958-stereo+input:analog-stereo
D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Stereo
(IEC958) (iec958-stereo)
D: [pulseaudio] alsa-util.c: Trying iec958:0 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)conf.c: Unknown parameters 0
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM iec958:0
I: [pulseaudio] alsa-util.c: Error opening PCM device iec958:0: Invalid
argument
D: [pulseaudio] alsa-mixer.c: Looking at profile
output:iec958-stereo+input:analog-4-channel-input
D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Stereo
(IEC958) (iec958-stereo)
D: [pulseaudio] alsa-util.c: Trying iec958:0 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)conf.c: Unknown parameters 0
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM iec958:0
I: [pulseaudio] alsa-util.c: Error opening PCM device iec958:0: Invalid
argument
D: [pulseaudio] alsa-mixer.c: Looking at profile
output:iec958-stereo+input:iec958-stereo
D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Stereo
(IEC958) (iec958-stereo)
D: [pulseaudio] alsa-util.c: Trying iec958:0 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)conf.c: Unknown parameters 0
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM iec958:0
I: [pulseaudio] alsa-util.c: Error opening PCM device iec958:0: Invalid
argument
D: [pulseaudio] alsa-mixer.c: Looking at profile
output:iec958-ac3-surround-40
D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Surround 4.0
(IEC958/AC3) (iec958-ac3-surround-40)
D: [pulseaudio] alsa-util.c: Trying a52:0 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM a52:0
I: [pulseaudio] alsa-util.c: Error opening PCM device a52:0: No such file
or directory
D: [pulseaudio] alsa-mixer.c: Looking at profile
output:iec958-ac3-surround-40+input:analog-mono
D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Surround 4.0
(IEC958/AC3) (iec958-ac3-surround-40)
D: [pulseaudio] alsa-util.c: Trying a52:0 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM a52:0
I: [pulseaudio] alsa-util.c: Error opening PCM device a52:0: No such file
or directory
D: [pulseaudio] alsa-mixer.c: Looking at profile
output:iec958-ac3-surround-40+input:analog-stereo
D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Surround 4.0
(IEC958/AC3) (iec958-ac3-surround-40)
D: [pulseaudio] alsa-util.c: Trying a52:0 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM a52:0
I: [pulseaudio] alsa-util.c: Error opening PCM device a52:0: No such file
or directory
D: [pulseaudio] alsa-mixer.c: Looking at profile
output:iec958-ac3-surround-40+input:analog-4-channel-input
D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Surround 4.0
(IEC958/AC3) (iec958-ac3-surround-40)
D: [pulseaudio] alsa-util.c: Trying a52:0 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM a52:0
I: [pulseaudio] alsa-util.c: Error opening PCM device a52:0: No such file
or directory
D: [pulseaudio] alsa-mixer.c: Looking at profile
output:iec958-ac3-surround-40+input:iec958-stereo
D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Surround 4.0
(IEC958/AC3) (iec958-ac3-surround-40)
D: [pulseaudio] alsa-util.c: Trying a52:0 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM a52:0
I: [pulseaudio] alsa-util.c: Error opening PCM device a52:0: No such file
or directory
D: [pulseaudio] alsa-mixer.c: Looking at profile
output:iec958-ac3-surround-51
D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Surround 5.1
(IEC958/AC3) (iec958-ac3-surround-51)
D: [pulseaudio] alsa-util.c: Trying a52:0 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM a52:0
I: [pulseaudio] alsa-util.c: Error opening PCM device a52:0: No such file
or directory
D: [pulseaudio] alsa-mixer.c: Looking at profile
output:iec958-ac3-surround-51+input:analog-mono
D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Surround 5.1
(IEC958/AC3) (iec958-ac3-surround-51)
D: [pulseaudio] alsa-util.c: Trying a52:0 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM a52:0
I: [pulseaudio] alsa-util.c: Error opening PCM device a52:0: No such file
or directory
D: [pulseaudio] alsa-mixer.c: Looking at profile
output:iec958-ac3-surround-51+input:analog-stereo
D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Surround 5.1
(IEC958/AC3) (iec958-ac3-surround-51)
D: [pulseaudio] alsa-util.c: Trying a52:0 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM a52:0
I: [pulseaudio] alsa-util.c: Error opening PCM device a52:0: No such file
or directory
D: [pulseaudio] alsa-mixer.c: Looking at profile
output:iec958-ac3-surround-51+input:analog-4-channel-input
D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Surround 5.1
(IEC958/AC3) (iec958-ac3-surround-51)
D: [pulseaudio] alsa-util.c: Trying a52:0 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM a52:0
I: [pulseaudio] alsa-util.c: Error opening PCM device a52:0: No such file
or directory
D: [pulseaudio] alsa-mixer.c: Looking at profile
output:iec958-ac3-surround-51+input:iec958-stereo
D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Surround 5.1
(IEC958/AC3) (iec958-ac3-surround-51)
D: [pulseaudio] alsa-util.c: Trying a52:0 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM a52:0
I: [pulseaudio] alsa-util.c: Error opening PCM device a52:0: No such file
or directory
D: [pulseaudio] alsa-mixer.c: Looking at profile
output:iec958-dts-surround-51
D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Surround 5.1
(IEC958/DTS) (iec958-dts-surround-51)
D: [pulseaudio] alsa-util.c: Trying dca:0 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dca:0
I: [pulseaudio] alsa-util.c: Error opening PCM device dca:0: No such file
or directory
D: [pulseaudio] alsa-mixer.c: Looking at profile
output:iec958-dts-surround-51+input:analog-mono
D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Surround 5.1
(IEC958/DTS) (iec958-dts-surround-51)
D: [pulseaudio] alsa-util.c: Trying dca:0 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dca:0
I: [pulseaudio] alsa-util.c: Error opening PCM device dca:0: No such file
or directory
D: [pulseaudio] alsa-mixer.c: Looking at profile
output:iec958-dts-surround-51+input:analog-stereo
D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Surround 5.1
(IEC958/DTS) (iec958-dts-surround-51)
D: [pulseaudio] alsa-util.c: Trying dca:0 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dca:0
I: [pulseaudio] alsa-util.c: Error opening PCM device dca:0: No such file
or directory
D: [pulseaudio] alsa-mixer.c: Looking at profile
output:iec958-dts-surround-51+input:analog-4-channel-input
D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Surround 5.1
(IEC958/DTS) (iec958-dts-surround-51)
D: [pulseaudio] alsa-util.c: Trying dca:0 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dca:0
I: [pulseaudio] alsa-util.c: Error opening PCM device dca:0: No such file
or directory
D: [pulseaudio] alsa-mixer.c: Looking at profile
output:iec958-dts-surround-51+input:iec958-stereo
D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Surround 5.1
(IEC958/DTS) (iec958-dts-surround-51)
D: [pulseaudio] alsa-util.c: Trying dca:0 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dca:0
I: [pulseaudio] alsa-util.c: Error opening PCM device dca:0: No such file
or directory
D: [pulseaudio] alsa-mixer.c: Looking at profile output:hdmi-stereo
D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Stereo
(HDMI) (hdmi-stereo)
D: [pulseaudio] alsa-util.c: Trying hdmi:0 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)conf.c: Unknown parameters 0
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:0
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0: Invalid
argument
D: [pulseaudio] alsa-mixer.c: Looking at profile
output:hdmi-stereo+input:analog-mono
D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Stereo
(HDMI) (hdmi-stereo)
D: [pulseaudio] alsa-util.c: Trying hdmi:0 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)conf.c: Unknown parameters 0
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:0
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0: Invalid
argument
D: [pulseaudio] alsa-mixer.c: Looking at profile
output:hdmi-stereo+input:analog-stereo
D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Stereo
(HDMI) (hdmi-stereo)
D: [pulseaudio] alsa-util.c: Trying hdmi:0 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)conf.c: Unknown parameters 0
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:0
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0: Invalid
argument
D: [pulseaudio] alsa-mixer.c: Looking at profile
output:hdmi-stereo+input:analog-4-channel-input
D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Stereo
(HDMI) (hdmi-stereo)
D: [pulseaudio] alsa-util.c: Trying hdmi:0 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)conf.c: Unknown parameters 0
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:0
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0: Invalid
argument
D: [pulseaudio] alsa-mixer.c: Looking at profile
output:hdmi-stereo+input:iec958-stereo
D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Stereo
(HDMI) (hdmi-stereo)
D: [pulseaudio] alsa-util.c: Trying hdmi:0 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)conf.c: Unknown parameters 0
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:0
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0: Invalid
argument
D: [pulseaudio] alsa-mixer.c: Looking at profile input:analog-mono
D: [pulseaudio] alsa-mixer.c: Checking for recording on Analog Mono
(analog-mono)
D: [pulseaudio] alsa-util.c: Trying hw:0 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D0c' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device hw:0: No such file or
directory
D: [pulseaudio] alsa-mixer.c: Looking at profile input:analog-stereo
D: [pulseaudio] alsa-mixer.c: Checking for recording on Analog Stereo
(analog-stereo)
D: [pulseaudio] alsa-util.c: Trying front:0 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)conf.c: Unknown parameters 0
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM front:0
I: [pulseaudio] alsa-util.c: Error opening PCM device front:0: Invalid
argument
D: [pulseaudio] alsa-util.c: Trying hw:0 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D0c' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device hw:0: No such file or
directory
D: [pulseaudio] alsa-mixer.c: Looking at profile
input:analog-4-channel-input
D: [pulseaudio] alsa-mixer.c: Checking for recording on Analog 4-channel
Input (analog-4-channel-input)
D: [pulseaudio] alsa-util.c: Trying hw:0 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D0c' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device hw:0: No such file or
directory
D: [pulseaudio] alsa-mixer.c: Looking at profile input:iec958-stereo
D: [pulseaudio] alsa-mixer.c: Checking for recording on Digital Stereo
(IEC958) (iec958-stereo)
D: [pulseaudio] alsa-util.c: Trying iec958:0 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)conf.c: Unknown parameters 0
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM iec958:0
I: [pulseaudio] alsa-util.c: Error opening PCM device iec958:0: Invalid
argument
D: [pulseaudio] alsa-mixer.c: Profile set 0xf65af0, auto_profiles=yes,
probed=yes, n_mappings=1, n_profiles=1, n_decibel_fixes=0
D: [pulseaudio] alsa-mixer.c: Mapping analog-stereo (Analog Stereo),
priority=60, channel_map=front-left,front-right, supported=yes, direction=0
D: [pulseaudio] alsa-mixer.c: Profile output:analog-stereo (Analog Stereo
Output), priority=6000, supported=yes n_input_mappings=0,
n_output_mappings=1
D: [pulseaudio] alsa-mixer.c: Output analog-stereo
D: [pulseaudio] module-card-restore.c: Database contains invalid data for
key: alsa_card.platform-sound (probably pre-v1.0 data)
D: [pulseaudio] module-card-restore.c: Attempting to load legacy (pre-v1.0)
data for key: alsa_card.platform-sound
D: [pulseaudio] module-card-restore.c: Size does not match.
D: [pulseaudio] module-card-restore.c: Unable to load legacy (pre-v1.0)
data for key: alsa_card.platform-sound. Ignoring.
I: [pulseaudio] card.c: Created 0 "alsa_card.platform-sound"
D: [pulseaudio] reserve-wrap.c: Unable to contact D-Bus session bus:
org.freedesktop.DBus.Error.NotSupported: Unable to autolaunch a dbus-daemon
without a $DISPLAY for X11
D: [pulseaudio] alsa-util.c: Trying front:0 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)conf.c: Unknown parameters 0
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM front:0
I: [pulseaudio] alsa-util.c: Error opening PCM device front:0: Invalid
argument
D: [pulseaudio] alsa-util.c: Trying hw:0 with SND_PCM_NO_AUTO_FORMAT ...
D: [pulseaudio] alsa-util.c: Managed to open hw:0
D: [pulseaudio] alsa-util.c: Maximum hw buffer size is 2730 ms
D: [pulseaudio] alsa-util.c: Set buffer size first (to 4800 samples),
period size second (to 1200 samples).
I: [pulseaudio] alsa-sink.c: Successfully opened device hw:0.
I: [pulseaudio] alsa-sink.c: Selected mapping 'Analog Stereo'
(analog-stereo).
I: [pulseaudio] alsa-sink.c: Device doesn't support mmap(), falling back to
UNIX read/write mode.
I: [pulseaudio] alsa-sink.c: Cannot enable timer-based scheduling, falling
back to sound IRQ scheduling.
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0'
D: [pulseaudio] alsa-mixer.c: Added 1 ports
D: [pulseaudio] module-device-restore.c: Database contains invalid data for
key: sink:alsa_output.platform-sound.analog-stereo:null
I: [pulseaudio] sink.c: Created sink 0
"alsa_output.platform-sound.analog-stereo" with sample spec s16le 2ch
48000Hz and channel map front-left,front-right
I: [pulseaudio] sink.c:     alsa.resolution_bits = "16"
I: [pulseaudio] sink.c:     device.api = "alsa"
I: [pulseaudio] sink.c:     device.class = "sound"
I: [pulseaudio] sink.c:     alsa.class = "generic"
I: [pulseaudio] sink.c:     alsa.subclass = "generic-mix"
I: [pulseaudio] sink.c:     alsa.name = ""
I: [pulseaudio] sink.c:     alsa.id = "HiFiBerry DAC+ HiFi pcm512x-hifi-0"
I: [pulseaudio] sink.c:     alsa.subdevice = "0"
I: [pulseaudio] sink.c:     alsa.subdevice_name = "subdevice #0"
I: [pulseaudio] sink.c:     alsa.device = "0"
I: [pulseaudio] sink.c:     alsa.card = "0"
I: [pulseaudio] sink.c:     alsa.card_name = "snd_rpi_hifiberry_dacplus"
I: [pulseaudio] sink.c:     alsa.long_card_name =
"snd_rpi_hifiberry_dacplus"
I: [pulseaudio] sink.c:     alsa.driver_name = "snd_soc_hifiberry_dacplus"
I: [pulseaudio] sink.c:     device.bus_path = "platform-sound"
I: [pulseaudio] sink.c:     sysfs.path = "/devices/sound/sound/card0"
I: [pulseaudio] sink.c:     device.string = "hw:0"
I: [pulseaudio] sink.c:     device.buffering.buffer_size = "19200"
I: [pulseaudio] sink.c:     device.buffering.fragment_size = "4800"
I: [pulseaudio] sink.c:     device.access_mode = "serial"
I: [pulseaudio] sink.c:     device.profile.name = "analog-stereo"
I: [pulseaudio] sink.c:     device.profile.description = "Analog Stereo"
I: [pulseaudio] sink.c:     device.description = "snd_rpi_hifiberry_dacplus
Analog Stereo"
I: [pulseaudio] sink.c:     module-udev-detect.discovered = "1"
I: [pulseaudio] sink.c:     device.icon_name = "audio-card"
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to change
event.
I: [pulseaudio] source.c: Created source 0
"alsa_output.platform-sound.analog-stereo.monitor" with sample spec s16le
2ch 48000Hz and channel map front-left,front-right
I: [pulseaudio] source.c:     device.description = "Monitor of
snd_rpi_hifiberry_dacplus Analog Stereo"
I: [pulseaudio] source.c:     device.class = "monitor"
I: [pulseaudio] source.c:     alsa.card = "0"
I: [pulseaudio] source.c:     alsa.card_name = "snd_rpi_hifiberry_dacplus"
I: [pulseaudio] source.c:     alsa.long_card_name =
"snd_rpi_hifiberry_dacplus"
I: [pulseaudio] source.c:     alsa.driver_name = "snd_soc_hifiberry_dacplus"
I: [pulseaudio] source.c:     device.bus_path = "platform-sound"
I: [pulseaudio] source.c:     sysfs.path = "/devices/sound/sound/card0"
I: [pulseaudio] source.c:     device.string = "0"
I: [pulseaudio] source.c:     module-udev-detect.discovered = "1"
I: [pulseaudio] source.c:     device.icon_name = "audio-card"
I: [pulseaudio] alsa-sink.c: Using 4.0 fragments of size 4800 bytes
(25.00ms), buffer size is 19200 bytes (100.00ms)
D: [pulseaudio] alsa-sink.c: hwbuf_unused=0
D: [pulseaudio] alsa-sink.c: setting avail_min=1
D: [pulseaudio] alsa-mixer.c: Activating path analog-output
D: [pulseaudio] alsa-mixer.c: Path analog-output (Analog Output),
direction=1, priority=99, probed=yes, supported=yes, has_mute=no,
has_volume=yes, has_dB=no, min_volume=0, max_volume=215, min_dB=inf,
max_dB=-inf
D: [pulseaudio] alsa-mixer.c: Element PCM, direction=1, switch=0, volume=1,
volume_limit=-1, enumeration=0, required=0, required_any=0,
required_absent=0, mask=0x3600000000f66, n_channels=2, override_map=yes
I: [pulseaudio] alsa-sink.c: Hardware volume ranges from 0 to 215.
I: [pulseaudio] alsa-sink.c: Using hardware volume control. Hardware dB
scale not supported.
I: [pulseaudio] alsa-sink.c: Driver does not support hardware mute control,
falling back to software mute control.
D: [pulseaudio] alsa-util.c: snd_pcm_dump():
D: [pulseaudio] alsa-util.c: Hardware PCM card 0
'snd_rpi_hifiberry_dacplus' device 0 subdevice 0
D: [pulseaudio] alsa-util.c: Its setup is:
D: [pulseaudio] alsa-util.c:   stream       : PLAYBACK
D: [pulseaudio] alsa-util.c:   access       : RW_INTERLEAVED
D: [pulseaudio] alsa-util.c:   format       : S16_LE
D: [pulseaudio] alsa-util.c:   subformat    : STD
D: [pulseaudio] alsa-util.c:   channels     : 2
D: [pulseaudio] alsa-util.c:   rate         : 48000
D: [pulseaudio] alsa-util.c:   exact rate   : 48000 (48000/1)
D: [pulseaudio] alsa-util.c:   msbits       : 16
D: [pulseaudio] alsa-util.c:   buffer_size  : 4800
D: [pulseaudio] alsa-util.c:   period_size  : 1200
D: [pulseaudio] alsa-util.c:   period_time  : 25000
D: [pulseaudio] alsa-util.c:   tstamp_mode  : ENABLE
D: [pulseaudio] alsa-util.c:   period_step  : 1
D: [pulseaudio] alsa-util.c:   avail_min    : 1200
D: [pulseaudio] alsa-util.c:   period_event : 1
D: [pulseaudio] alsa-util.c:   start_threshold  : -1
D: [pulseaudio] alsa-util.c:   stop_threshold   : 1258291200
D: [pulseaudio] alsa-util.c:   silence_threshold: 0
D: [pulseaudio] alsa-util.c:   silence_size : 0
D: [pulseaudio] alsa-util.c:   boundary     : 1258291200
D: [pulseaudio] alsa-util.c:   appl_ptr     : 0
D: [pulseaudio] alsa-util.c:   hw_ptr       : 0
D: [pulseaudio] alsa-sink.c: Read hardware volume: 0:  80% 1:  80%
D: [alsa-sink] alsa-sink.c: Thread starting up
D: [alsa-sink] core-util.c: SCHED_RR|SCHED_RESET_ON_FORK worked.
I: [alsa-sink] core-util.c: Successfully enabled SCHED_RR scheduling for
thread, with priority 5.
I: [alsa-sink] alsa-sink.c: Starting playback.
I: [alsa-sink] (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_START failed (-77)
D: [pulseaudio] module-device-restore.c: Could not set format on sink
alsa_output.platform-sound.analog-stereo
D: [pulseaudio] module-alsa-card.c: Found 0 jacks.
I: [pulseaudio] module.c: Loaded "module-alsa-card" (index: #4; argument:
"device_id="0" name="platform-sound" card_name="alsa_card.platform-sound"
namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no
deferred_volume=yes card_properties="module-udev-detect.discovered=1"").
I: [pulseaudio] module-udev-detect.c: Card /devices/sound/sound/card0
(alsa_card.platform-sound) module loaded.
I: [pulseaudio] module-udev-detect.c: Found 1 cards.
I: [pulseaudio] module.c: Loaded "module-udev-detect" (index: #5; argument:
"").
D: [pulseaudio] cli-command.c: Checking for existence of
'/usr/lib/pulse-2.0/modules/module-jackdbus-detect.so': success
E: [pulseaudio] module-jackdbus-detect.c: Unable to contact D-Bus session
bus: org.freedesktop.DBus.Error.NotSupported: Unable to autolaunch a
dbus-daemon without a $DISPLAY for X11
E: [pulseaudio] module.c: Failed to load module "module-jackdbus-detect"
(argument: ""): initialization failed.
D: [pulseaudio] cli-command.c: Checking for existence of
'/usr/lib/pulse-2.0/modules/module-bluetooth-discover.so': success
D: [pulseaudio] dbus-util.c: Successfully connected to D-Bus system bus
52d90f2234ec8df2baa89ef7550f8676 as :1.41
D: [pulseaudio] bluetooth-util.c: dbus: interface=org.freedesktop.DBus,
path=/org/freedesktop/DBus, member=NameAcquired
E: [pulseaudio] bluetooth-util.c: org.bluez.Manager.ListAdapters() failed:
org.freedesktop.DBus.Error.AccessDenied: Rejected send message, 2 matched
rules; type="method_call", sender=":1.41" (uid=1000 pid=6616
comm="pulseaudio -vvv ") interface="org.bluez.Manager"
member="ListAdapters" error name="(unset)" requested_reply="0"
destination="org.bluez" (uid=0 pid=6113 comm="/usr/sbin/bluetoothd ")
I: [pulseaudio] module.c: Loaded "module-bluetooth-discover" (index: #6;
argument: "").
D: [pulseaudio] cli-command.c: Checking for existence of
'/usr/lib/pulse-2.0/modules/module-esound-protocol-unix.so': success
I: [pulseaudio] module.c: Loaded "module-esound-protocol-unix" (index: #7;
argument: "").
I: [pulseaudio] module.c: Loaded "module-native-protocol-unix" (index: #8;
argument: "").
I: [pulseaudio] module.c: Loaded "module-rtp-recv" (index: #9; argument:
"").
D: [pulseaudio] cli-command.c: Checking for existence of
'/usr/lib/pulse-2.0/modules/module-gconf.so': success
I: [pulseaudio] module.c: Loaded "module-gconf" (index: #10; argument: "").
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to change
event.
I: [pulseaudio] module-default-device-restore.c: Restored default sink
'alsa_output.platform-sound.analog-stereo'.
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to change
event.
I: [pulseaudio] module-default-device-restore.c: Restored default source
'alsa_output.platform-sound.analog-stereo.monitor'.
I: [pulseaudio] module.c: Loaded "module-default-device-restore" (index:
#11; argument: "").
I: [pulseaudio] module.c: Loaded "module-rescue-streams" (index: #12;
argument: "").
I: [pulseaudio] module.c: Loaded "module-always-sink" (index: #13;
argument: "").
I: [pulseaudio] module.c: Loaded "module-intended-roles" (index: #14;
argument: "").
D: [pulseaudio] module-suspend-on-idle.c: Sink
alsa_output.platform-sound.analog-stereo becomes idle, timeout in 5 seconds.
I: [pulseaudio] module.c: Loaded "module-suspend-on-idle" (index: #15;
argument: "").
D: [pulseaudio] cli-command.c: Checking for existence of
'/usr/lib/pulse-2.0/modules/module-console-kit.so': success
I: [pulseaudio] module.c: Loaded "module-console-kit" (index: #16;
argument: "").
D: [pulseaudio] cli-command.c: Checking for existence of
'/usr/lib/pulse-2.0/modules/module-systemd-login.so': success
I: [pulseaudio] module.c: Loaded "module-systemd-login" (index: #17;
argument: "").
I: [pulseaudio] module.c: Loaded "module-position-event-sounds" (index:
#18; argument: "").
D: [pulseaudio] module-role-cork.c: Using role 'phone' as trigger role.
D: [pulseaudio] module-role-cork.c: Using roles 'music' and 'video' as cork
roles.
I: [pulseaudio] module.c: Loaded "module-role-cork" (index: #19; argument:
"").
I: [pulseaudio] module.c: Loaded "module-filter-heuristics" (index: #20;
argument: "").
I: [pulseaudio] module.c: Loaded "module-filter-apply" (index: #21;
argument: "").
D: [pulseaudio] cli-command.c: Checking for existence of
'/usr/lib/pulse-2.0/modules/module-dbus-protocol.so': success
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Memstats
added for object /org/pulseaudio/core1/memstats
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.CardProfile
added for object /org/pulseaudio/core1/card0/profile0
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.CardProfile
added for object /org/pulseaudio/core1/card0/profile1
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Card added
for object /org/pulseaudio/core1/card0
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.DevicePort
added for object /org/pulseaudio/core1/sink0/port0
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Device
added for object /org/pulseaudio/core1/sink0
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Sink added
for object /org/pulseaudio/core1/sink0
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Device
added for object /org/pulseaudio/core1/source0
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Source
added for object /org/pulseaudio/core1/source0
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module
added for object /org/pulseaudio/core1/module0
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module
added for object /org/pulseaudio/core1/module1
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module
added for object /org/pulseaudio/core1/module2
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module
added for object /org/pulseaudio/core1/module3
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module
added for object /org/pulseaudio/core1/module4
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module
added for object /org/pulseaudio/core1/module5
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module
added for object /org/pulseaudio/core1/module6
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module
added for object /org/pulseaudio/core1/module7
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module
added for object /org/pulseaudio/core1/module8
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module
added for object /org/pulseaudio/core1/module9
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module
added for object /org/pulseaudio/core1/module10
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module
added for object /org/pulseaudio/core1/module11
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module
added for object /org/pulseaudio/core1/module12
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module
added for object /org/pulseaudio/core1/module13
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module
added for object /org/pulseaudio/core1/module14
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module
added for object /org/pulseaudio/core1/module15
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module
added for object /org/pulseaudio/core1/module16
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module
added for object /org/pulseaudio/core1/module17
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module
added for object /org/pulseaudio/core1/module18
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module
added for object /org/pulseaudio/core1/module19
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module
added for object /org/pulseaudio/core1/module20
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module
added for object /org/pulseaudio/core1/module21
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1 added for
object /org/pulseaudio/core1
I: [pulseaudio] module.c: Loaded "module-dbus-protocol" (index: #22;
argument: "").
I: [pulseaudio] module.c: Loaded "module-switch-on-port-available" (index:
#23; argument: "").
E: [pulseaudio] main.c: Module load failed.
W: [pulseaudio] server-lookup.c: Unable to contact D-Bus:
org.freedesktop.DBus.Error.NotSupported: Unable to autolaunch a dbus-daemon
without a $DISPLAY for X11
W: [pulseaudio] main.c: Unable to contact D-Bus:
org.freedesktop.DBus.Error.NotSupported: Unable to autolaunch a dbus-daemon
without a $DISPLAY for X11
I: [pulseaudio] main.c: Daemon startup complete.
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module
added for object /org/pulseaudio/core1/module22
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module
added for object /org/pulseaudio/core1/module23
D: [pulseaudio] module-udev-detect.c: /dev/snd/controlC0 is accessible: yes
D: [pulseaudio] module-stream-restore.c: Not restoring device for stream
sink-input-by-media-role:stream, because already set to
'alsa_output.platform-sound.analog-stereo'.
D: [pulseaudio] module-intended-roles.c: Not setting device for stream RTP
Stream (PulseAudio RTP Stream on linuxbox), because already set.
D: [pulseaudio] module-suspend-on-idle.c: Sink
alsa_output.platform-sound.analog-stereo becomes busy.
I: [pulseaudio] resampler.c: Using resampler 'speex-fixed-3'
I: [pulseaudio] resampler.c: Using s16le as working format.
I: [pulseaudio] resampler.c: Choosing speex quality setting 3.
D: [pulseaudio] memblockq.c: memblockq requested: maxlength=33554432,
tlength=0, base=4, prebuf=0, minreq=1 maxrewind=0
D: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=33554432,
tlength=33554432, base=4, prebuf=0, minreq=4 maxrewind=0
I: [pulseaudio] sink-input.c: Created input 0 "RTP Stream (PulseAudio RTP
Stream on linuxbox)" on alsa_output.platform-sound.analog-stereo with
sample spec s16be 2ch 48000Hz and channel map front-left,front-right
I: [pulseaudio] sink-input.c:     media.role = "stream"
I: [pulseaudio] sink-input.c:     media.name = "RTP Stream (PulseAudio RTP
Stream on linuxbox)"
I: [pulseaudio] sink-input.c:     rtp.session = "PulseAudio RTP Stream on
linuxbox"
I: [pulseaudio] sink-input.c:     rtp.origin = "dave 3636070020 0 IN IP4
10.99.10.14"
I: [pulseaudio] sink-input.c:     rtp.payload = "127"
I: [pulseaudio] sink-input.c:     module-stream-restore.id =
"sink-input-by-media-role:stream"
D: [pulseaudio] memblockq.c: memblockq requested: maxlength=41943040,
tlength=41943040, base=4, prebuf=76800, minreq=0 maxrewind=0
D: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=41943040,
tlength=41943040, base=4, prebuf=76800, minreq=4 maxrewind=0
I: [pulseaudio] module-rtp-recv.c: New session 'PulseAudio RTP Stream on
linuxbox'
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Stream
added for object /org/pulseaudio/core1/playback_stream0
D: [alsa-sink] module-rtp-recv.c: Requesting rewind due to end of underrun
D: [alsa-sink] alsa-sink.c: Requested to rewind 19200 bytes.
D: [alsa-sink] alsa-sink.c: Limited to 18800 bytes.
D: [alsa-sink] alsa-sink.c: before: 4700
D: [alsa-sink] alsa-sink.c: after: 4700
D: [alsa-sink] alsa-sink.c: Rewound 18800 bytes.
D: [alsa-sink] sink.c: Processing rewind...
D: [alsa-sink] sink-input.c: Have to rewind 18800 bytes on render memblockq.
D: [alsa-sink] source.c: Processing rewind...
D: [alsa-sink] module-rtp-recv.c: Updating sample rate
D: [alsa-sink] module-rtp-recv.c: wi=5006666 ri=4693333
D: [alsa-sink] module-rtp-recv.c: Write index deviates by 413.23 ms,
expected 500.00 ms
D: [alsa-sink] module-rtp-recv.c: Estimated target rate: 47181 Hz, using
average of 47984 Hz  (Î±=0.020)
I: [alsa-sink] module-rtp-recv.c: New rate of 47775 Hz not within 2â° of
48000 Hz, forcing smaller adjustment
D: [alsa-sink] module-rtp-recv.c: Updated sampling rate to 47904 Hz.
D: [alsa-sink] module-rtp-recv.c: Updating sample rate
D: [alsa-sink] module-rtp-recv.c: wi=10033400 ri=9712758
D: [alsa-sink] module-rtp-recv.c: Write index deviates by 422.95 ms,
expected 500.00 ms
D: [alsa-sink] module-rtp-recv.c: Estimated target rate: 47997 Hz, using
average of 47994 Hz  (Î±=0.792)
D: [alsa-sink] module-rtp-recv.c: Updated sampling rate to 47809 Hz.
D: [alsa-sink] module-rtp-recv.c: Updating sample rate
D: [alsa-sink] module-rtp-recv.c: wi=15080005 ri=14745340
D: [alsa-sink] module-rtp-recv.c: Write index deviates by 439.26 ms,
expected 500.00 ms
D: [alsa-sink] module-rtp-recv.c: Estimated target rate: 47965 Hz, using
average of 47994 Hz  (Î±=0.020)
D: [alsa-sink] module-rtp-recv.c: Updated sampling rate to 47848 Hz.
D: [pulseaudio] module-rtp-recv.c: Checking for dead streams ...
D: [alsa-sink] module-rtp-recv.c: Updating sample rate
D: [alsa-sink] module-rtp-recv.c: wi=20090285 ri=19729142
D: [alsa-sink] module-rtp-recv.c: Write index deviates by 460.76 ms,
expected 500.00 ms
D: [alsa-sink] module-rtp-recv.c: Estimated target rate: 48055 Hz, using
average of 47995 Hz  (Î±=0.020)
D: [alsa-sink] module-rtp-recv.c: Updated sampling rate to 47900 Hz.
D: [alsa-sink] module-rtp-recv.c: Updating sample rate
D: [alsa-sink] module-rtp-recv.c: wi=25085594 ri=24711482
D: [alsa-sink] module-rtp-recv.c: Write index deviates by 475.53 ms,
expected 500.00 ms
D: [alsa-sink] module-rtp-recv.c: Estimated target rate: 48042 Hz, using
average of 48033 Hz  (Î±=0.800)
D: [alsa-sink] module-rtp-recv.c: Updated sampling rate to 47973 Hz.
D: [alsa-sink] module-rtp-recv.c: Updating sample rate
D: [alsa-sink] module-rtp-recv.c: wi=30043566 ri=29676693
D: [alsa-sink] module-rtp-recv.c: Write index deviates by 468.34 ms,
expected 500.00 ms
D: [alsa-sink] module-rtp-recv.c: Estimated target rate: 47904 Hz, using
average of 48030 Hz  (Î±=0.020)
D: [alsa-sink] module-rtp-recv.c: Updated sampling rate to 47953 Hz.
D: [alsa-sink] module-rtp-recv.c: Updating sample rate
D: [alsa-sink] module-rtp-recv.c: wi=35067670 ri=34693971
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freedesktop.org/archives/pulseaudio-discuss/attachments/20150322/dcd2455e/attachment-0001.html>