[pulseaudio-discuss] [PATCH 0/3] Multichannel fixes

[David Henningsson]

About the first patch:

I tested and refined a patch previously submitted by Takashi
Sakamoto. It seems like nothing has happened on the udev side so I
suggest we take this one for now. In case udev should improve and get a
model database for the Firewire bus, then we could consider
reverting this.

With all three patches, my FireWire device now shows up like I want
it in the GUI.

Before:

Card #2
	Name: alsa_card.firewire-0x000a9200c9040125
	Driver: module-alsa-card.c
	Owner Module: 8
	Properties:
		alsa.card = "0"
		alsa.card_name = "PreSonus FP10"
		alsa.long_card_name = "Presonus PreSonus FP10 (id:135, rev:1), GUID 000a9200c9040125 at fw1.0, S400"
		alsa.driver_name = "snd_bebob"
		device.bus_path = "pci-0000:03:0e.0"
		sysfs.path = "/devices/pci0000:00/0000:00:14.4/0000:03:0e.0/fw1/fw1.0/sound/card0"
		udev.id = "firewire-0x000a9200c9040125"
		device.bus = "firewire"
		device.vendor.name = "Texas Instruments"
		device.product.name = "Motherboard"
		device.string = "0"
		device.description = "Motherboard"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-firewire"
	Profiles:
		input:multichannel: Multichannel Input (sinks: 0, sources: 1, priority: 1, available: yes)
		output:multichannel: Multichannel Output (sinks: 1, sources: 0, priority: 100, available: yes)
		output:multichannel+input:multichannel: Multichannel Output + Multichannel Input (sinks: 1, sources: 1, priority: 101, available: yes)
		off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
	Active Profile: output:multichannel+input:multichannel

After:

Card #2
	Name: alsa_card.firewire-0x000a9200c9040125
	Driver: module-alsa-card.c
	Owner Module: 8
	Properties:
		alsa.card = "0"
		alsa.card_name = "PreSonus FP10"
		alsa.long_card_name = "Presonus PreSonus FP10 (id:135, rev:1), GUID 000a9200c9040125 at fw1.0, S400"
		alsa.driver_name = "snd_bebob"
		device.bus_path = "pci-0000:03:0e.0"
		sysfs.path = "/devices/pci0000:00/0000:00:14.4/0000:03:0e.0/fw1/fw1.0/sound/card0"
		udev.id = "firewire-0x000a9200c9040125"
		device.bus = "firewire"
		device.vendor.name = "Presonus"
		device.product.name = "PreSonus FP10"
		device.string = "0"
		device.description = "PreSonus FP10"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-firewire"
	Profiles:
		input:multichannel2: Multichannel Input (sinks: 0, sources: 1, priority. 1)
		output:multichannel: Multichannel Output (sinks: 1, sources: 0, priority. 100)
		output:multichannel+input:multichannel2: Multichannel Duplex (sinks: 1, sources: 1, priority. 101)
		off: Off (sinks: 0, sources: 0, priority. 0)
	Active Profile: output:multichannel+input:multichannel2
	Ports:
		multichannel-input: Multichannel Input (priority: 0, latency offset: 0 usec)
			Part of profile(s): input:multichannel2, output:multichannel+input:multichannel2
		multichannel-output: Multichannel Output (priority: 0, latency offset: 0 usec)
			Part of profile(s): output:multichannel, output:multichannel+input:multichannel2


David Henningsson (2):
  alsa-mixer: Use separate profiles for Multichannel Input/Output
  alsa-mixer: Add paths/ports for multichannel profile

Takashi Sakamoto (1):
  udev: use ID_MODEL/ID_VENDOR to give friendly name for FireWire
    devices

 src/modules/alsa/alsa-mixer.c                    |  6 +++++-
 src/modules/alsa/mixer/profile-sets/default.conf | 11 +++++++++++
 src/modules/udev-util.c                          | 11 +++++++----
 3 files changed, 23 insertions(+), 5 deletions(-)

-- 
1.9.1