[pulseaudio-discuss] Input sound random detection.
Gustavo Duarte
gus.duarte at gmail.com
Wed Aug 10 16:05:13 UTC 2016
Hi,
I did the test suggested, parecord worked, however pasuspender not.
I saw after run pasuspender, all the sound stop working, the input (mic)
and output (speaker).
So i repeat the test and got two pactl output as following:
1) Boot the laptop.
2) run parecord --device=alsa_input.pci-0000_00_1b.0.analog-stereo test.wav
3) aplay test.wav, sounds was recorded, works fine.
4) Open gnome-settings, audio meter show activity.
5) Run pactl list > without-pasuspender.pactl
6) Run pasuspender -- arecord --device=plughw:0 test1.wav
7) aplay test1.wav, sounds wasn't recorded.
8) Open gnome-settings, audio meters doesn't show activity.
9) Run pactl list > with-pasuspender.pactl
I hope this sequence be usefully for you, if not please tell how to do
another one.
I attach both pactl outputs.
Thanks in advance.
Gustavo.
On 8/10/16 12:19 PM, Tanu Kaskinen wrote:
> On Wed, 2016-08-10 at 11:43 -0300, Gustavo Duarte wrote:
>> Hi Tanu, thank you for the feedback.
>>
>>
>> No, i can't break the microphne after it started to working.
>>
>>
>> The sequence is following:
>>
>> 1) Boot the laptop.
>>
>> 2) Mic with conf apps, like skype and Hangout isn't working.
>>
>> 3) Mic on other sound apps type, like QArecord, working well.
>>
>> 4) Changing volume input level on gnome settings.
>>
>> 5) Mic start to working with Skype.
>>
>> 5) Change the volume to 100%, and MIC still working.
>>
>> 6) Reboot the laptop, and back to beheavoirs from step 1),
>>
>> I wonder why, mic is start to working if change the volume from
>> gnome-settings ?
>>
>> I tried to change de volume with:
>>
>> amixer set Mic 20 on
>>
>> or
>> pacmd set-source-volume 1 13106
>> pacmd set-sourece-mute 1 0
>>
>> and without effects.
>>
>> Is like, the settings should be changed from a gui apps, may be
>> something related with a dbus signal ?
> D-Bus problems are extremely unlikely, because Gnome sound settings
> doesn't use D-Bus to communicate with pulseaudio.
>
>> I'm going to see the source code of gnome-settings, to see what it does
>> to change the volume, and see if a can find a clue for this side.
>>
>> Do you have another test, i can do ?
> Right after boot, before running any other applications, you can try to
> record something with this command:
>
> parecord --device=alsa_input.pci-0000_00_1b.0.analog-stereo test.wav
>
> Does that work? That is, does test.wav contain any non-silence audio?
>
> If not, you can also try
>
> pasuspender -- arecord --device=plughw:0 test.wav
>
> Does that work? If not, it's an alsa bug.
>
> If both commands work, you can try opening Gnome audio settings. If it
> shows that the volume is 100%, but the volume meter shows no activity,
> try the parecord command again while the sound settings is open. Is
> parecord capable of recording audio while the sound settings indicates
> that the mic doesn't work? While the sound settings is open and
> parecord is running, run "pactl list" and send the output to the
> mailing list.
>
> --
> Tanu
> _______________________________________________
> pulseaudio-discuss mailing list
> pulseaudio-discuss at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/pulseaudio-discuss
-------------- next part --------------
Módulo #0
Nombre: module-device-restore
Argumento:
Contador de uso: n/d
Propiedades:
module.author = "Lennart Poettering"
module.description = "Automatically restore the volume/mute state of devices"
module.version = "4.0"
Módulo #1
Nombre: module-stream-restore
Argumento:
Contador de uso: n/d
Propiedades:
module.author = "Lennart Poettering"
module.description = "Automatically restore the volume/mute/device state of streams"
module.version = "4.0"
Módulo #2
Nombre: module-card-restore
Argumento:
Contador de uso: n/d
Propiedades:
module.author = "Lennart Poettering"
module.description = "Automatically restore profile of cards"
module.version = "4.0"
Módulo #3
Nombre: module-augment-properties
Argumento:
Contador de uso: n/d
Propiedades:
module.author = "Lennart Poettering"
module.description = "Augment the property sets of streams with additional static information"
module.version = "4.0"
Módulo #4
Nombre: module-switch-on-port-available
Argumento:
Contador de uso: n/d
Propiedades:
Módulo #5
Nombre: module-alsa-card
Argumento: device_id="0" name="pci-0000_00_1b.0" card_name="alsa_card.pci-0000_00_1b.0" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes card_properties="module-udev-detect.discovered=1"
Contador de uso: 2
Propiedades:
module.author = "Lennart Poettering"
module.description = "ALSA Card"
module.version = "4.0"
Módulo #6
Nombre: module-udev-detect
Argumento:
Contador de uso: n/d
Propiedades:
module.author = "Lennart Poettering"
module.description = "Detect available audio hardware and load matching drivers"
module.version = "4.0"
Módulo #7
Nombre: module-bluetooth-policy
Argumento:
Contador de uso: n/d
Propiedades:
module.author = "Frédéric Dalleau"
module.description = "When a bluetooth sink or source is added, load module-loopback"
module.version = "4.0"
Módulo #8
Nombre: module-bluetooth-discover
Argumento:
Contador de uso: n/d
Propiedades:
module.author = "Joao Paulo Rechi Vita"
module.description = "Detect available bluetooth audio devices and load bluetooth audio drivers"
module.version = "4.0"
Módulo #9
Nombre: module-native-protocol-unix
Argumento:
Contador de uso: n/d
Propiedades:
module.author = "Lennart Poettering"
module.description = "Native protocol (UNIX sockets)"
module.version = "4.0"
Módulo #10
Nombre: module-default-device-restore
Argumento:
Contador de uso: n/d
Propiedades:
module.author = "Lennart Poettering"
module.description = "Automatically restore the default sink and source"
module.version = "4.0"
Módulo #11
Nombre: module-rescue-streams
Argumento:
Contador de uso: n/d
Propiedades:
module.author = "Lennart Poettering"
module.description = "When a sink/source is removed, try to move their streams to the default sink/source"
module.version = "4.0"
Módulo #12
Nombre: module-always-sink
Argumento:
Contador de uso: n/d
Propiedades:
module.author = "Colin Guthrie"
module.description = "Tenga siempre cargado al menos un destino aunque sea uno nulo"
module.version = "4.0"
Módulo #13
Nombre: module-intended-roles
Argumento:
Contador de uso: n/d
Propiedades:
module.author = "Lennart Poettering"
module.description = "Automatically set device of streams based of intended roles of devices"
module.version = "4.0"
Módulo #14
Nombre: module-suspend-on-idle
Argumento:
Contador de uso: n/d
Propiedades:
module.author = "Lennart Poettering"
module.description = "When a sink/source is idle for too long, suspend it"
module.version = "4.0"
Módulo #15
Nombre: module-systemd-login
Argumento:
Contador de uso: n/d
Propiedades:
module.author = "Lennart Poettering"
module.description = "Create a client for each login session of this user"
module.version = "4.0"
Módulo #16
Nombre: module-position-event-sounds
Argumento:
Contador de uso: n/d
Propiedades:
module.author = "Lennart Poettering"
module.description = "Position event sounds between L and R depending on the position on screen of the widget triggering them."
module.version = "4.0"
Módulo #17
Nombre: module-filter-heuristics
Argumento:
Contador de uso: n/d
Propiedades:
module.author = "Colin Guthrie"
module.description = "Detect when various filters are desirable"
module.version = "4.0"
Módulo #18
Nombre: module-filter-apply
Argumento:
Contador de uso: n/d
Propiedades:
module.author = "Colin Guthrie"
module.description = "Load filter sinks automatically when needed"
module.version = "4.0"
Módulo #19
Nombre: module-x11-publish
Argumento: display=:0
Contador de uso: n/d
Propiedades:
module.author = "Lennart Poettering"
module.description = "X11 credential publisher"
module.version = "4.0"
Módulo #20
Nombre: module-x11-bell
Argumento: display=:0 sample=bell.ogg
Contador de uso: n/d
Propiedades:
module.author = "Lennart Poettering"
module.description = "X11 bell interceptor"
module.version = "4.0"
Módulo #21
Nombre: module-x11-cork-request
Argumento: display=:0
Contador de uso: n/d
Propiedades:
module.author = "Lennart Poettering"
module.description = "Synthesize X11 media key events when cork/uncork is requested"
module.version = "4.0"
Módulo #22
Nombre: module-x11-xsmp
Argumento: display=:0 session_manager=local/ceibal:@/tmp/.ICE-unix/1333,unix/ceibal:/tmp/.ICE-unix/1333
Contador de uso: n/d
Propiedades:
module.author = "Lennart Poettering"
module.description = "X11 session management"
module.version = "4.0"
Destino #0
Estado: SUSPENDED
Nombre: alsa_output.pci-0000_00_1b.0.analog-stereo
Descripción: Audio Interno Estéreo analógico
Controlador: module-alsa-card.c
Especificación de muestra: s16le 2ch 48000Hz
Asignación de canal: front-left,front-right
Módulo propietario: 5
Silencio: no
Volumen: 0: 82% 1: 82%
0: -5,03 dB 1: -5,03 dB
balance 0,00
Volumen base: 100%
0,00 dB
Origen de monitor: alsa_output.pci-0000_00_1b.0.analog-stereo.monitor
Latencia: 0 usec, configurada 0 usec
Marcas: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY
Propiedades:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "VT1802 Analog"
alsa.id = "VT1802 Analog"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "0"
alsa.card_name = "HDA Intel PCH"
alsa.long_card_name = "HDA Intel PCH at 0xd0810000 irq 93"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1b.0"
sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "0f04"
device.product.name = "ValleyView High Definition Audio Controller"
device.form_factor = "internal"
device.string = "front:0"
device.buffering.buffer_size = "65536"
device.buffering.fragment_size = "32768"
device.access_mode = "mmap+timer"
device.profile.name = "analog-stereo"
device.profile.description = "Estéreo analógico"
device.description = "Audio Interno Estéreo analógico"
alsa.mixer_name = "VIA VT1802"
alsa.components = "HDA:11068446,15585471,00100000 HDA:80862882,80860101,00100000"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Puertos:
analog-output-speaker: Altavoces (priority: 10000)
analog-output-headphones: Auriculares analógicos (priority: 9000, not available)
Puerto Activo: analog-output-speaker
Formatos:
pcm
Fuente #0
Estado: SUSPENDED
Nombre: alsa_output.pci-0000_00_1b.0.analog-stereo.monitor
Descripción: Monitor of Audio Interno Estéreo analógico
Controlador: module-alsa-card.c
Especificación de la Muestra: s16le 2ch 44100Hz
Mapa del Canal: front-left,front-right
Módulo Dueño: 5
Mudo: no
Volume: 0: 100% 1: 100%
0: 0,00 dB 1: 0,00 dB
balance 0,00
Volume Base: 100%
0,00 dB
Monitoreo del destino: alsa_output.pci-0000_00_1b.0.analog-stereo
Latencia: 0 usec, configurado 0 useg
Banderas: DECIBEL_VOLUME LATENCY
Propiedades:
device.description = "Monitor of Audio Interno Estéreo analógico"
device.class = "monitor"
alsa.card = "0"
alsa.card_name = "HDA Intel PCH"
alsa.long_card_name = "HDA Intel PCH at 0xd0810000 irq 93"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1b.0"
sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "0f04"
device.product.name = "ValleyView High Definition Audio Controller"
device.form_factor = "internal"
device.string = "0"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Formatos:
pcm
Fuente #1
Estado: SUSPENDED
Nombre: alsa_input.pci-0000_00_1b.0.analog-stereo
Descripción: Audio Interno Estéreo analógico
Controlador: module-alsa-card.c
Especificación de la Muestra: s16le 2ch 44100Hz
Mapa del Canal: front-left,front-right
Módulo Dueño: 5
Mudo: no
Volume: 0: 16% 1: 16%
0: -48,00 dB 1: -48,00 dB
balance 0,00
Volume Base: 8%
-66,00 dB
Monitoreo del destino: n/d
Latencia: 0 usec, configurado 0 useg
Banderas: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY
Propiedades:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "VT1802 Analog"
alsa.id = "VT1802 Analog"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "0"
alsa.card_name = "HDA Intel PCH"
alsa.long_card_name = "HDA Intel PCH at 0xd0810000 irq 93"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1b.0"
sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "0f04"
device.product.name = "ValleyView High Definition Audio Controller"
device.form_factor = "internal"
device.string = "front:0"
device.buffering.buffer_size = "65536"
device.buffering.fragment_size = "32768"
device.access_mode = "mmap+timer"
device.profile.name = "analog-stereo"
device.profile.description = "Estéreo analógico"
device.description = "Audio Interno Estéreo analógico"
alsa.mixer_name = "VIA VT1802"
alsa.components = "HDA:11068446,15585471,00100000 HDA:80862882,80860101,00100000"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Puertos:
analog-input-microphone-internal: Micrófono interno (priority: 8900)
analog-input-microphone: Micrófono (priority: 8700, not available)
Puerto Activo: analog-input-microphone-internal
Formatos:
pcm
Salida de origen #3
Disco: protocol-native.c
Módulo propietario: 9
Cliente: 21
Destino: 1
Especificación de sample: float32le 1ch 25Hz
Mapa de canal: mono
Formato: pcm, format.sample_format = "\"float32le\"" format.rate = "25" format.channels = "1" format.channel_map = "\"mono\""
Corked: no
Mute: no
Volumen: 0: 100%
0: 0,00 dB
balance 0,00
Latencia de búfer: 0 usec
Latencia de destino: 0 usec
Método de resample: peaks
Propiedades:
application.id = "org.gnome.VolumeControl"
media.name = "Detección de picos"
application.name = "GNOME Volume Control Dialog"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "28"
application.icon_name = "multimedia-volume-control"
application.version = "3.6.3"
application.process.id = "2188"
application.process.user = "ceibal"
application.process.host = "ceibal"
application.process.binary = "gnome-control-center.real"
application.language = "es_UY.UTF-8"
window.x11.display = ":0"
application.process.machine_id = "7fa399cd946674ed89a5c33856b0fa6b"
application.process.session_id = "c1"
module-stream-restore.id = "source-output-by-application-id:org.gnome.VolumeControl"
Salida de origen #4
Disco: protocol-native.c
Módulo propietario: 9
Cliente: 22
Destino: 1
Especificación de sample: s16le 2ch 44100Hz
Mapa de canal: front-left,front-right
Formato: pcm, format.sample_format = "\"s16le\"" format.rate = "44100" format.channels = "2" format.channel_map = "\"front-left,front-right\""
Corked: no
Mute: no
Volumen: 0: 100% 1: 100%
0: 0,00 dB 1: 0,00 dB
balance 0,00
Latencia de búfer: 0 usec
Latencia de destino: 0 usec
Método de resample: n/d
Propiedades:
media.format = "WAV (Microsoft)"
application.name = "parecord"
media.name = "test-parecord.wav"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "28"
application.process.id = "2197"
application.process.user = "ceibal"
application.process.host = "ceibal"
application.process.binary = "pacat"
application.language = "es_UY.UTF-8"
window.x11.display = ":0"
application.process.machine_id = "7fa399cd946674ed89a5c33856b0fa6b"
application.process.session_id = "c1"
module-stream-restore.id = "source-output-by-application-name:parecord"
Cliente #0
Controlador: module-systemd-login.c
Módulo dueño: 15
Propiedades:
application.name = "Login Session c1"
systemd-login.session = "c1"
Cliente #3
Controlador: protocol-native.c
Módulo dueño: 9
Propiedades:
application.name = "GNOME Volume Control Media Keys"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "28"
application.id = "org.gnome.VolumeControl"
application.icon_name = "multimedia-volume-control"
application.version = "3.8.6.1"
application.process.id = "1329"
application.process.user = "ceibal"
application.process.host = "ceibal"
application.process.binary = "gnome-settings-daemon"
application.language = "es_UY.UTF-8"
window.x11.display = ":0"
application.process.machine_id = "7fa399cd946674ed89a5c33856b0fa6b"
application.process.session_id = "c1"
Cliente #6
Controlador: module-x11-xsmp.c
Módulo dueño: 22
Propiedades:
application.name = "XSMP Session on gnome-session as 10cb1dd47e63109b80147084399474063800000013330035"
xsmp.vendor = "gnome-session"
xsmp.client.id = "10cb1dd47e63109b80147084399474063800000013330035"
Cliente #8
Controlador: protocol-native.c
Módulo dueño: 9
Propiedades:
application.name = "GNOME Shell"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "28"
application.id = "org.gnome.Shell"
application.icon_name = "start-here"
application.language = "es_UY.UTF-8"
window.x11.screen = "0"
window.x11.display = ":0"
application.process.id = "1519"
application.process.user = "ceibal"
application.process.host = "ceibal"
application.process.binary = "gnome-shell"
application.process.machine_id = "7fa399cd946674ed89a5c33856b0fa6b"
application.process.session_id = "c1"
Cliente #9
Controlador: protocol-native.c
Módulo dueño: 9
Propiedades:
application.name = "GNOME Shell Volume Control"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "28"
application.id = "org.gnome.VolumeControl"
application.icon_name = "multimedia-volume-control"
application.version = "3.10.4"
application.process.id = "1519"
application.process.user = "ceibal"
application.process.host = "ceibal"
application.process.binary = "gnome-shell"
application.language = "es_UY.UTF-8"
window.x11.display = ":0"
application.process.machine_id = "7fa399cd946674ed89a5c33856b0fa6b"
application.process.session_id = "c1"
Cliente #21
Controlador: protocol-native.c
Módulo dueño: 9
Propiedades:
application.name = "GNOME Volume Control Dialog"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "28"
application.id = "org.gnome.VolumeControl"
application.icon_name = "multimedia-volume-control"
application.version = "3.6.3"
application.process.id = "2188"
application.process.user = "ceibal"
application.process.host = "ceibal"
application.process.binary = "gnome-control-center.real"
application.language = "es_UY.UTF-8"
window.x11.display = ":0"
application.process.machine_id = "7fa399cd946674ed89a5c33856b0fa6b"
application.process.session_id = "c1"
Cliente #22
Controlador: protocol-native.c
Módulo dueño: 9
Propiedades:
application.name = "parecord"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "28"
media.format = "WAV (Microsoft)"
media.name = "test-parecord.wav"
application.process.id = "2197"
application.process.user = "ceibal"
application.process.host = "ceibal"
application.process.binary = "pacat"
application.language = "es_UY.UTF-8"
window.x11.display = ":0"
application.process.machine_id = "7fa399cd946674ed89a5c33856b0fa6b"
application.process.session_id = "c1"
Cliente #23
Controlador: protocol-native.c
Módulo dueño: 9
Propiedades:
application.name = "pactl"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "28"
application.process.id = "2202"
application.process.user = "ceibal"
application.process.host = "ceibal"
application.process.binary = "pactl"
application.language = "es_UY.UTF-8"
window.x11.display = ":0"
application.process.machine_id = "7fa399cd946674ed89a5c33856b0fa6b"
application.process.session_id = "c1"
Muestra #0
Nombre: bell-window-system
Especificaciones de la muestra: s16le 2ch 44100Hz
Mapa del canal: front-left,front-right
Volumen: (incorrecto)
(incorrecto)
balance 0,00
Duración: 0,1s
Tamaño: 24,0 KiB
Lazy: no
Nombre del archivo: n/d
Propiedades:
media.role = "event"
application.process.id = "2013"
application.name = "gnome-terminal"
event.description = "Evento de campana"
event.id = "bell-window-system"
media.name = "bell-window-system"
media.filename = "/usr/share//sounds/freedesktop/stereo/bell.oga"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "28"
application.id = "org.gnome.Shell"
application.icon_name = "start-here"
application.language = "es_UY.UTF-8"
window.x11.screen = "0"
window.x11.display = ":0"
application.process.user = "ceibal"
application.process.host = "ceibal"
application.process.binary = "gnome-shell"
application.process.machine_id = "7fa399cd946674ed89a5c33856b0fa6b"
application.process.session_id = "c1"
Placa #0
Nombre: alsa_card.pci-0000_00_1b.0
Controlador: module-alsa-card.c
Módulo dueño: 5
Propiedades:
alsa.card = "0"
alsa.card_name = "HDA Intel PCH"
alsa.long_card_name = "HDA Intel PCH at 0xd0810000 irq 93"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1b.0"
sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "0f04"
device.product.name = "ValleyView High Definition Audio Controller"
device.form_factor = "internal"
device.string = "0"
device.description = "Audio Interno"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Perfiles:
input:analog-stereo: Estéreo analógico Entrada (sinks: 0, sources: 1, priority. 60)
output:analog-stereo: Estéreo analógico Salida (sinks: 1, sources: 0, priority. 6000)
output:analog-stereo+input:analog-stereo: Estéreo Analógico Dúplex (sinks: 1, sources: 1, priority. 6060)
output:hdmi-stereo: Digital Stereo (HDMI) Salida (sinks: 1, sources: 0, priority. 5400)
output:hdmi-stereo+input:analog-stereo: Digital Stereo (HDMI) Salida + Estéreo analógico Entrada (sinks: 1, sources: 1, priority. 5460)
output:hdmi-surround: Digital Surround 5.1 (HDMI) Salida (sinks: 1, sources: 0, priority. 300)
output:hdmi-surround+input:analog-stereo: Digital Surround 5.1 (HDMI) Salida + Estéreo analógico Entrada (sinks: 1, sources: 1, priority. 360)
off: Apagado (sinks: 0, sources: 0, priority. 0)
Perfil activo: output:analog-stereo+input:analog-stereo
Puertos:
analog-input-microphone-internal: Micrófono interno (priority: 8900, latency offset: 0 usec)
Propiedades:
device.icon_name = "audio-input-microphone"
Parte del perfil(es): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:hdmi-stereo+input:analog-stereo, output:hdmi-surround+input:analog-stereo
analog-input-microphone: Micrófono (priority: 8700, latency offset: 0 usec, not available)
Propiedades:
device.icon_name = "audio-input-microphone"
Parte del perfil(es): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:hdmi-stereo+input:analog-stereo, output:hdmi-surround+input:analog-stereo
analog-output-speaker: Altavoces (priority: 10000, latency offset: 0 usec)
Propiedades:
device.icon_name = "audio-speakers"
Parte del perfil(es): output:analog-stereo, output:analog-stereo+input:analog-stereo
analog-output-headphones: Auriculares analógicos (priority: 9000, latency offset: 0 usec, not available)
Propiedades:
device.icon_name = "audio-headphones"
Parte del perfil(es): output:analog-stereo, output:analog-stereo+input:analog-stereo
hdmi-output-0: HDMI / DisplayPort (priority: 5900, latency offset: 0 usec, not available)
Propiedades:
device.icon_name = "video-display"
Parte del perfil(es): output:hdmi-stereo, output:hdmi-stereo+input:analog-stereo, output:hdmi-surround, output:hdmi-surround+input:analog-stereo
-------------- next part --------------
Módulo #0
Nombre: module-device-restore
Argumento:
Contador de uso: n/d
Propiedades:
module.author = "Lennart Poettering"
module.description = "Automatically restore the volume/mute state of devices"
module.version = "4.0"
Módulo #1
Nombre: module-stream-restore
Argumento:
Contador de uso: n/d
Propiedades:
module.author = "Lennart Poettering"
module.description = "Automatically restore the volume/mute/device state of streams"
module.version = "4.0"
Módulo #2
Nombre: module-card-restore
Argumento:
Contador de uso: n/d
Propiedades:
module.author = "Lennart Poettering"
module.description = "Automatically restore profile of cards"
module.version = "4.0"
Módulo #3
Nombre: module-augment-properties
Argumento:
Contador de uso: n/d
Propiedades:
module.author = "Lennart Poettering"
module.description = "Augment the property sets of streams with additional static information"
module.version = "4.0"
Módulo #4
Nombre: module-switch-on-port-available
Argumento:
Contador de uso: n/d
Propiedades:
Módulo #5
Nombre: module-alsa-card
Argumento: device_id="0" name="pci-0000_00_1b.0" card_name="alsa_card.pci-0000_00_1b.0" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes card_properties="module-udev-detect.discovered=1"
Contador de uso: 2
Propiedades:
module.author = "Lennart Poettering"
module.description = "ALSA Card"
module.version = "4.0"
Módulo #6
Nombre: module-udev-detect
Argumento:
Contador de uso: n/d
Propiedades:
module.author = "Lennart Poettering"
module.description = "Detect available audio hardware and load matching drivers"
module.version = "4.0"
Módulo #7
Nombre: module-bluetooth-policy
Argumento:
Contador de uso: n/d
Propiedades:
module.author = "Frédéric Dalleau"
module.description = "When a bluetooth sink or source is added, load module-loopback"
module.version = "4.0"
Módulo #8
Nombre: module-bluetooth-discover
Argumento:
Contador de uso: n/d
Propiedades:
module.author = "Joao Paulo Rechi Vita"
module.description = "Detect available bluetooth audio devices and load bluetooth audio drivers"
module.version = "4.0"
Módulo #9
Nombre: module-native-protocol-unix
Argumento:
Contador de uso: n/d
Propiedades:
module.author = "Lennart Poettering"
module.description = "Native protocol (UNIX sockets)"
module.version = "4.0"
Módulo #10
Nombre: module-default-device-restore
Argumento:
Contador de uso: n/d
Propiedades:
module.author = "Lennart Poettering"
module.description = "Automatically restore the default sink and source"
module.version = "4.0"
Módulo #11
Nombre: module-rescue-streams
Argumento:
Contador de uso: n/d
Propiedades:
module.author = "Lennart Poettering"
module.description = "When a sink/source is removed, try to move their streams to the default sink/source"
module.version = "4.0"
Módulo #12
Nombre: module-always-sink
Argumento:
Contador de uso: n/d
Propiedades:
module.author = "Colin Guthrie"
module.description = "Tenga siempre cargado al menos un destino aunque sea uno nulo"
module.version = "4.0"
Módulo #13
Nombre: module-intended-roles
Argumento:
Contador de uso: n/d
Propiedades:
module.author = "Lennart Poettering"
module.description = "Automatically set device of streams based of intended roles of devices"
module.version = "4.0"
Módulo #14
Nombre: module-suspend-on-idle
Argumento:
Contador de uso: n/d
Propiedades:
module.author = "Lennart Poettering"
module.description = "When a sink/source is idle for too long, suspend it"
module.version = "4.0"
Módulo #15
Nombre: module-systemd-login
Argumento:
Contador de uso: n/d
Propiedades:
module.author = "Lennart Poettering"
module.description = "Create a client for each login session of this user"
module.version = "4.0"
Módulo #16
Nombre: module-position-event-sounds
Argumento:
Contador de uso: n/d
Propiedades:
module.author = "Lennart Poettering"
module.description = "Position event sounds between L and R depending on the position on screen of the widget triggering them."
module.version = "4.0"
Módulo #17
Nombre: module-filter-heuristics
Argumento:
Contador de uso: n/d
Propiedades:
module.author = "Colin Guthrie"
module.description = "Detect when various filters are desirable"
module.version = "4.0"
Módulo #18
Nombre: module-filter-apply
Argumento:
Contador de uso: n/d
Propiedades:
module.author = "Colin Guthrie"
module.description = "Load filter sinks automatically when needed"
module.version = "4.0"
Módulo #19
Nombre: module-x11-publish
Argumento: display=:0
Contador de uso: n/d
Propiedades:
module.author = "Lennart Poettering"
module.description = "X11 credential publisher"
module.version = "4.0"
Módulo #20
Nombre: module-x11-bell
Argumento: display=:0 sample=bell.ogg
Contador de uso: n/d
Propiedades:
module.author = "Lennart Poettering"
module.description = "X11 bell interceptor"
module.version = "4.0"
Módulo #21
Nombre: module-x11-cork-request
Argumento: display=:0
Contador de uso: n/d
Propiedades:
module.author = "Lennart Poettering"
module.description = "Synthesize X11 media key events when cork/uncork is requested"
module.version = "4.0"
Módulo #22
Nombre: module-x11-xsmp
Argumento: display=:0 session_manager=local/ceibal:@/tmp/.ICE-unix/1333,unix/ceibal:/tmp/.ICE-unix/1333
Contador de uso: n/d
Propiedades:
module.author = "Lennart Poettering"
module.description = "X11 session management"
module.version = "4.0"
Destino #0
Estado: SUSPENDED
Nombre: alsa_output.pci-0000_00_1b.0.analog-stereo
Descripción: Audio Interno Estéreo analógico
Controlador: module-alsa-card.c
Especificación de muestra: s16le 2ch 44100Hz
Asignación de canal: front-left,front-right
Módulo propietario: 5
Silencio: no
Volumen: 0: 82% 1: 82%
0: -5,03 dB 1: -5,03 dB
balance 0,00
Volumen base: 100%
0,00 dB
Origen de monitor: alsa_output.pci-0000_00_1b.0.analog-stereo.monitor
Latencia: 0 usec, configurada 0 usec
Marcas: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY
Propiedades:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "VT1802 Analog"
alsa.id = "VT1802 Analog"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "0"
alsa.card_name = "HDA Intel PCH"
alsa.long_card_name = "HDA Intel PCH at 0xd0810000 irq 93"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1b.0"
sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "0f04"
device.product.name = "ValleyView High Definition Audio Controller"
device.form_factor = "internal"
device.string = "front:0"
device.buffering.buffer_size = "65536"
device.buffering.fragment_size = "32768"
device.access_mode = "mmap+timer"
device.profile.name = "analog-stereo"
device.profile.description = "Estéreo analógico"
device.description = "Audio Interno Estéreo analógico"
alsa.mixer_name = "VIA VT1802"
alsa.components = "HDA:11068446,15585471,00100000 HDA:80862882,80860101,00100000"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Puertos:
analog-output-speaker: Altavoces (priority: 10000)
analog-output-headphones: Auriculares analógicos (priority: 9000, not available)
Puerto Activo: analog-output-speaker
Formatos:
pcm
Fuente #0
Estado: SUSPENDED
Nombre: alsa_output.pci-0000_00_1b.0.analog-stereo.monitor
Descripción: Monitor of Audio Interno Estéreo analógico
Controlador: module-alsa-card.c
Especificación de la Muestra: s16le 2ch 44100Hz
Mapa del Canal: front-left,front-right
Módulo Dueño: 5
Mudo: no
Volume: 0: 100% 1: 100%
0: 0,00 dB 1: 0,00 dB
balance 0,00
Volume Base: 100%
0,00 dB
Monitoreo del destino: alsa_output.pci-0000_00_1b.0.analog-stereo
Latencia: 0 usec, configurado 0 useg
Banderas: DECIBEL_VOLUME LATENCY
Propiedades:
device.description = "Monitor of Audio Interno Estéreo analógico"
device.class = "monitor"
alsa.card = "0"
alsa.card_name = "HDA Intel PCH"
alsa.long_card_name = "HDA Intel PCH at 0xd0810000 irq 93"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1b.0"
sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "0f04"
device.product.name = "ValleyView High Definition Audio Controller"
device.form_factor = "internal"
device.string = "0"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Formatos:
pcm
Fuente #1
Estado: RUNNING
Nombre: alsa_input.pci-0000_00_1b.0.analog-stereo
Descripción: Audio Interno Estéreo analógico
Controlador: module-alsa-card.c
Especificación de la Muestra: s16le 2ch 44100Hz
Mapa del Canal: front-left,front-right
Módulo Dueño: 5
Mudo: no
Volume: 0: 16% 1: 16%
0: -48,00 dB 1: -48,00 dB
balance 0,00
Volume Base: 8%
-66,00 dB
Monitoreo del destino: n/d
Latencia: 0 usec, configurado 20000 useg
Banderas: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY
Propiedades:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "VT1802 Analog"
alsa.id = "VT1802 Analog"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "0"
alsa.card_name = "HDA Intel PCH"
alsa.long_card_name = "HDA Intel PCH at 0xd0810000 irq 93"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1b.0"
sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "0f04"
device.product.name = "ValleyView High Definition Audio Controller"
device.form_factor = "internal"
device.string = "front:0"
device.buffering.buffer_size = "65536"
device.buffering.fragment_size = "32768"
device.access_mode = "mmap+timer"
device.profile.name = "analog-stereo"
device.profile.description = "Estéreo analógico"
device.description = "Audio Interno Estéreo analógico"
alsa.mixer_name = "VIA VT1802"
alsa.components = "HDA:11068446,15585471,00100000 HDA:80862882,80860101,00100000"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Puertos:
analog-input-microphone-internal: Micrófono interno (priority: 8900)
analog-input-microphone: Micrófono (priority: 8700, not available)
Puerto Activo: analog-input-microphone-internal
Formatos:
pcm
Salida de origen #1
Disco: protocol-native.c
Módulo propietario: 9
Cliente: 13
Destino: 1
Especificación de sample: float32le 1ch 25Hz
Mapa de canal: mono
Formato: pcm, format.sample_format = "\"float32le\"" format.rate = "25" format.channels = "1" format.channel_map = "\"mono\""
Corked: no
Mute: no
Volumen: 0: 100%
0: 0,00 dB
balance 0,00
Latencia de búfer: 0 usec
Latencia de destino: 79 usec
Método de resample: peaks
Propiedades:
application.id = "org.gnome.VolumeControl"
media.name = "Detección de picos"
application.name = "GNOME Volume Control Dialog"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "28"
application.icon_name = "multimedia-volume-control"
application.version = "3.6.3"
application.process.id = "2094"
application.process.user = "ceibal"
application.process.host = "ceibal"
application.process.binary = "gnome-control-center.real"
application.language = "es_UY.UTF-8"
window.x11.display = ":0"
application.process.machine_id = "7fa399cd946674ed89a5c33856b0fa6b"
application.process.session_id = "c1"
module-stream-restore.id = "source-output-by-application-id:org.gnome.VolumeControl"
Salida de origen #2
Disco: protocol-native.c
Módulo propietario: 9
Cliente: 15
Destino: 1
Especificación de sample: s16le 2ch 44100Hz
Mapa de canal: front-left,front-right
Formato: pcm, format.sample_format = "\"s16le\"" format.rate = "44100" format.channels = "2" format.channel_map = "\"front-left,front-right\""
Corked: no
Mute: no
Volumen: 0: 100% 1: 100%
0: 0,00 dB 1: 0,00 dB
balance 0,00
Latencia de búfer: 0 usec
Latencia de destino: 134 usec
Método de resample: n/d
Propiedades:
media.format = "WAV (Microsoft)"
application.name = "parecord"
media.name = "test-parecord.wav"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "28"
application.process.id = "2105"
application.process.user = "ceibal"
application.process.host = "ceibal"
application.process.binary = "pacat"
application.language = "es_UY.UTF-8"
window.x11.display = ":0"
application.process.machine_id = "7fa399cd946674ed89a5c33856b0fa6b"
application.process.session_id = "c1"
module-stream-restore.id = "source-output-by-application-name:parecord"
Cliente #0
Controlador: module-systemd-login.c
Módulo dueño: 15
Propiedades:
application.name = "Login Session c1"
systemd-login.session = "c1"
Cliente #3
Controlador: protocol-native.c
Módulo dueño: 9
Propiedades:
application.name = "GNOME Volume Control Media Keys"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "28"
application.id = "org.gnome.VolumeControl"
application.icon_name = "multimedia-volume-control"
application.version = "3.8.6.1"
application.process.id = "1329"
application.process.user = "ceibal"
application.process.host = "ceibal"
application.process.binary = "gnome-settings-daemon"
application.language = "es_UY.UTF-8"
window.x11.display = ":0"
application.process.machine_id = "7fa399cd946674ed89a5c33856b0fa6b"
application.process.session_id = "c1"
Cliente #6
Controlador: module-x11-xsmp.c
Módulo dueño: 22
Propiedades:
application.name = "XSMP Session on gnome-session as 10cb1dd47e63109b80147084399474063800000013330035"
xsmp.vendor = "gnome-session"
xsmp.client.id = "10cb1dd47e63109b80147084399474063800000013330035"
Cliente #8
Controlador: protocol-native.c
Módulo dueño: 9
Propiedades:
application.name = "GNOME Shell"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "28"
application.id = "org.gnome.Shell"
application.icon_name = "start-here"
application.language = "es_UY.UTF-8"
window.x11.screen = "0"
window.x11.display = ":0"
application.process.id = "1519"
application.process.user = "ceibal"
application.process.host = "ceibal"
application.process.binary = "gnome-shell"
application.process.machine_id = "7fa399cd946674ed89a5c33856b0fa6b"
application.process.session_id = "c1"
Cliente #9
Controlador: protocol-native.c
Módulo dueño: 9
Propiedades:
application.name = "GNOME Shell Volume Control"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "28"
application.id = "org.gnome.VolumeControl"
application.icon_name = "multimedia-volume-control"
application.version = "3.10.4"
application.process.id = "1519"
application.process.user = "ceibal"
application.process.host = "ceibal"
application.process.binary = "gnome-shell"
application.language = "es_UY.UTF-8"
window.x11.display = ":0"
application.process.machine_id = "7fa399cd946674ed89a5c33856b0fa6b"
application.process.session_id = "c1"
Cliente #13
Controlador: protocol-native.c
Módulo dueño: 9
Propiedades:
application.name = "GNOME Volume Control Dialog"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "28"
application.id = "org.gnome.VolumeControl"
application.icon_name = "multimedia-volume-control"
application.version = "3.6.3"
application.process.id = "2094"
application.process.user = "ceibal"
application.process.host = "ceibal"
application.process.binary = "gnome-control-center.real"
application.language = "es_UY.UTF-8"
window.x11.display = ":0"
application.process.machine_id = "7fa399cd946674ed89a5c33856b0fa6b"
application.process.session_id = "c1"
Cliente #15
Controlador: protocol-native.c
Módulo dueño: 9
Propiedades:
application.name = "parecord"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "28"
media.format = "WAV (Microsoft)"
media.name = "test-parecord.wav"
application.process.id = "2105"
application.process.user = "ceibal"
application.process.host = "ceibal"
application.process.binary = "pacat"
application.language = "es_UY.UTF-8"
window.x11.display = ":0"
application.process.machine_id = "7fa399cd946674ed89a5c33856b0fa6b"
application.process.session_id = "c1"
Cliente #16
Controlador: protocol-native.c
Módulo dueño: 9
Propiedades:
application.name = "pactl"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "28"
application.process.id = "2107"
application.process.user = "ceibal"
application.process.host = "ceibal"
application.process.binary = "pactl"
application.language = "es_UY.UTF-8"
window.x11.display = ":0"
application.process.machine_id = "7fa399cd946674ed89a5c33856b0fa6b"
application.process.session_id = "c1"
Muestra #0
Nombre: bell-window-system
Especificaciones de la muestra: s16le 2ch 44100Hz
Mapa del canal: front-left,front-right
Volumen: (incorrecto)
(incorrecto)
balance 0,00
Duración: 0,1s
Tamaño: 24,0 KiB
Lazy: no
Nombre del archivo: n/d
Propiedades:
media.role = "event"
application.process.id = "2013"
application.name = "gnome-terminal"
event.description = "Evento de campana"
event.id = "bell-window-system"
media.name = "bell-window-system"
media.filename = "/usr/share//sounds/freedesktop/stereo/bell.oga"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "28"
application.id = "org.gnome.Shell"
application.icon_name = "start-here"
application.language = "es_UY.UTF-8"
window.x11.screen = "0"
window.x11.display = ":0"
application.process.user = "ceibal"
application.process.host = "ceibal"
application.process.binary = "gnome-shell"
application.process.machine_id = "7fa399cd946674ed89a5c33856b0fa6b"
application.process.session_id = "c1"
Placa #0
Nombre: alsa_card.pci-0000_00_1b.0
Controlador: module-alsa-card.c
Módulo dueño: 5
Propiedades:
alsa.card = "0"
alsa.card_name = "HDA Intel PCH"
alsa.long_card_name = "HDA Intel PCH at 0xd0810000 irq 93"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1b.0"
sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "0f04"
device.product.name = "ValleyView High Definition Audio Controller"
device.form_factor = "internal"
device.string = "0"
device.description = "Audio Interno"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Perfiles:
input:analog-stereo: Estéreo analógico Entrada (sinks: 0, sources: 1, priority. 60)
output:analog-stereo: Estéreo analógico Salida (sinks: 1, sources: 0, priority. 6000)
output:analog-stereo+input:analog-stereo: Estéreo Analógico Dúplex (sinks: 1, sources: 1, priority. 6060)
output:hdmi-stereo: Digital Stereo (HDMI) Salida (sinks: 1, sources: 0, priority. 5400)
output:hdmi-stereo+input:analog-stereo: Digital Stereo (HDMI) Salida + Estéreo analógico Entrada (sinks: 1, sources: 1, priority. 5460)
output:hdmi-surround: Digital Surround 5.1 (HDMI) Salida (sinks: 1, sources: 0, priority. 300)
output:hdmi-surround+input:analog-stereo: Digital Surround 5.1 (HDMI) Salida + Estéreo analógico Entrada (sinks: 1, sources: 1, priority. 360)
off: Apagado (sinks: 0, sources: 0, priority. 0)
Perfil activo: output:analog-stereo+input:analog-stereo
Puertos:
analog-input-microphone-internal: Micrófono interno (priority: 8900, latency offset: 0 usec)
Propiedades:
device.icon_name = "audio-input-microphone"
Parte del perfil(es): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:hdmi-stereo+input:analog-stereo, output:hdmi-surround+input:analog-stereo
analog-input-microphone: Micrófono (priority: 8700, latency offset: 0 usec, not available)
Propiedades:
device.icon_name = "audio-input-microphone"
Parte del perfil(es): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:hdmi-stereo+input:analog-stereo, output:hdmi-surround+input:analog-stereo
analog-output-speaker: Altavoces (priority: 10000, latency offset: 0 usec)
Propiedades:
device.icon_name = "audio-speakers"
Parte del perfil(es): output:analog-stereo, output:analog-stereo+input:analog-stereo
analog-output-headphones: Auriculares analógicos (priority: 9000, latency offset: 0 usec, not available)
Propiedades:
device.icon_name = "audio-headphones"
Parte del perfil(es): output:analog-stereo, output:analog-stereo+input:analog-stereo
hdmi-output-0: HDMI / DisplayPort (priority: 5900, latency offset: 0 usec, not available)
Propiedades:
device.icon_name = "video-display"
Parte del perfil(es): output:hdmi-stereo, output:hdmi-stereo+input:analog-stereo, output:hdmi-surround, output:hdmi-surround+input:analog-stereo
More information about the pulseaudio-discuss
mailing list