[pulseaudio-discuss] [PATCH v2 02/12] pulsecore: srbchannel: Introduce per-client SHM files
Ahmed S. Darwish
darwish.07 at gmail.com
Fri Feb 12 00:09:31 UTC 2016
The PA daemon currently uses a single SHM file for all the clients
sending and receiving commands over the low-latency srbchannel
mechanism.
To safely run PA daemon in system mode later using memfds, and to
provide the necessary ground work for sandboxing, create the
srbchannel SHM files on a per-client basis.
Signed-off-by: Ahmed S. Darwish <darwish.07 at gmail.com>
---
src/pulsecore/core.c | 19 ++++++++++---------
src/pulsecore/core.h | 6 ++----
src/pulsecore/protocol-native.c | 28 ++++++++++++++++++++++++----
3 files changed, 36 insertions(+), 17 deletions(-)
[ For more details on the vacuuming issue, please check the
message sent in direct reply to this patch.. ]
diff --git a/src/pulsecore/core.c b/src/pulsecore/core.c
index b2df7de..1c3c3cd 100644
--- a/src/pulsecore/core.c
+++ b/src/pulsecore/core.c
@@ -126,11 +126,6 @@ pa_core* pa_core_new(pa_mainloop_api *m, bool shared, size_t shm_size) {
c->shm_size = shm_size;
pa_silence_cache_init(&c->silence_cache);
- if (shared && !(c->rw_mempool = pa_mempool_new(shared, shm_size)))
- pa_log_warn("Failed to allocate shared writable memory pool.");
- if (c->rw_mempool)
- pa_mempool_set_is_remote_writable(c->rw_mempool, true);
-
c->exit_event = NULL;
c->scache_auto_unload_event = NULL;
@@ -217,8 +212,6 @@ static void core_free(pa_object *o) {
pa_assert(!c->default_sink);
pa_silence_cache_done(&c->silence_cache);
- if (c->rw_mempool)
- pa_mempool_free(c->rw_mempool);
pa_mempool_free(c->mempool);
for (j = 0; j < PA_CORE_HOOK_MAX; j++)
@@ -285,8 +278,16 @@ void pa_core_maybe_vacuum(pa_core *c) {
pa_mempool_vacuum(c->mempool);
- if (c->rw_mempool)
- pa_mempool_vacuum(c->rw_mempool);
+ /*
+ * FIXME: Vacuum the per-client rw (srbchannel) mempools
+ *
+ * We need to vacuum the per-client mempool owned by each connection
+ * at pa_native_protocol::connections. Nonetheless, libpulsecore can
+ * not access any symbol from protocol-native.
+ *
+ * Vacuuming a per-client mempool on its streams deletion and
+ * uncorking also proved to be problematic.
+ */
}
pa_time_event* pa_core_rttime_new(pa_core *c, pa_usec_t usec, pa_time_event_cb_t cb, void *userdata) {
diff --git a/src/pulsecore/core.h b/src/pulsecore/core.h
index 428689c..9f5c445 100644
--- a/src/pulsecore/core.h
+++ b/src/pulsecore/core.h
@@ -177,10 +177,8 @@ struct pa_core {
PA_LLIST_HEAD(pa_subscription_event, subscription_event_queue);
pa_subscription_event *subscription_event_last;
- /* The mempool is used for data we write to, it's readonly for the client.
- The rw_mempool is used for data writable by both server and client (and
- can be NULL in some cases). */
- pa_mempool *mempool, *rw_mempool;
+ /* The mempool is used for data we write to, it's readonly for the client. */
+ pa_mempool *mempool;
/* Shared memory size, as specified either by daemon configuration
* or PA daemon defaults (~ 64 MiB). */
diff --git a/src/pulsecore/protocol-native.c b/src/pulsecore/protocol-native.c
index 145db04..c6b3ca4 100644
--- a/src/pulsecore/protocol-native.c
+++ b/src/pulsecore/protocol-native.c
@@ -173,6 +173,12 @@ struct pa_native_connection {
bool is_local:1;
uint32_t version;
pa_client *client;
+ /* R/W mempool, one per client connection, for srbchannel transport.
+ * Both server and client can write to this shm area.
+ *
+ * Note: This will be NULL if our connection with the client does
+ * not support srbchannels */
+ pa_mempool *rw_mempool;
pa_pstream *pstream;
pa_pdispatch *pdispatch;
pa_idxset *record_streams, *output_streams;
@@ -1348,6 +1354,12 @@ static void native_connection_unlink(pa_native_connection *c) {
if (c->pstream)
pa_pstream_unlink(c->pstream);
+ /* This mempool is used exclusively by srbchanels. Do not free it
+ * except after ending all srbchannel communications through the
+ * pstreams unlink above */
+ if (c->rw_mempool)
+ pa_mempool_free(c->rw_mempool);
+
if (c->auth_timeout_event) {
c->protocol->core->mainloop->time_free(c->auth_timeout_event);
c->auth_timeout_event = NULL;
@@ -2606,15 +2618,17 @@ static void setup_srbchannel(pa_native_connection *c) {
return;
}
- if (!c->protocol->core->rw_mempool) {
- pa_log_debug("Disabling srbchannel, reason: No rw memory pool");
+ if (!(c->rw_mempool = pa_mempool_new(true, c->protocol->core->shm_size))) {
+ pa_log_warn("Disabling srbchannel, reason: Failed to allocate shared "
+ "writable memory pool.");
return;
}
+ pa_mempool_set_is_remote_writable(c->rw_mempool, true);
- srb = pa_srbchannel_new(c->protocol->core->mainloop, c->protocol->core->rw_mempool);
+ srb = pa_srbchannel_new(c->protocol->core->mainloop, c->rw_mempool);
if (!srb) {
pa_log_debug("Failed to create srbchannel");
- return;
+ goto free_rw_mempool;
}
pa_log_debug("Enabling srbchannel...");
pa_srbchannel_export(srb, &srbt);
@@ -2634,6 +2648,10 @@ static void setup_srbchannel(pa_native_connection *c) {
pa_pstream_send_memblock(c->pstream, 0, 0, 0, &mc);
c->srbpending = srb;
+ return;
+
+free_rw_mempool:
+ pa_mempool_free(c->rw_mempool);
}
static void command_enable_srbchannel(pa_pdispatch *pd, uint32_t command, uint32_t tag, pa_tagstruct *t, void *userdata) {
@@ -5125,6 +5143,8 @@ void pa_native_protocol_connect(pa_native_protocol *p, pa_iochannel *io, pa_nati
c->client->send_event = client_send_event_cb;
c->client->userdata = c;
+ c->rw_mempool = NULL;
+
c->pstream = pa_pstream_new(p->core->mainloop, io, p->core->mempool);
pa_pstream_set_receive_packet_callback(c->pstream, pstream_packet_callback, c);
pa_pstream_set_receive_memblock_callback(c->pstream, pstream_memblock_callback, c);
Regards,
--
Darwish
http://darwish.chasingpointers.com
More information about the pulseaudio-discuss
mailing list