[pulseaudio-discuss] HFP HF - Reject SCO Issue

[Jomon John]

> On 07.06.2016 12:11, Jomon John wrote:
> >> * Same for HFP, nothing related to bluez_* in pactl or pacmd outputs. Again i can see the audio levels changing in pavucontrol (connected from external machine with PULSE_SERVER) but only one side audio is working which is from device side mic to other end.   on the other side (calling phone to device) the levels are changing but seems to be not routed to the default sink (since the levels are not changing in the default sink)
>>>
>>>        Loaded "module-loopback" (index: #30; argument: "source="bluez_source.CC_C3_EA_0A_15_90" source_dont_move="true" sink_input_properties="media.role=phone"").
>>>        card.c: Changed profile of card 1 "bluez_card.CC_C3_EA_0A_15_90" to headset_audio_gateway
>>>
>>> some more information regarding the setup,
>>>
>>> * Everything is run as root user who is member of audio and pulse groups
>>> * PA daemon is not in system mode
>>> * ofono and bluez is available on dbus system bus but pulseaudio is on dbus session bus (is this the right way ??)
>>> Is there only one loopback module? There should be two, one from the
>>> bluez source to the default sink and
>>> one from the default source to the bluez sink.
>> You were right, as per the logs the module-loopback loaded two times,
>>
>>       [pulseaudio] module.c: Loaded "module-loopback" (index: #41; argument: "sink="bluez_sink.CC_C3_EA_0A_15_90" sink_dont_move="true" source_output_properties="media.role=phone"")
>>
>>       [pulseaudio] module.c: Loaded "module-loopback" (index: #42; argument: "source="bluez_source.CC_C3_EA_0A_15_90" source_dont_move="true" sink_input_properties="media.role=phone"").
>>      
>> The audio from default source is channeled to phone but i cant hear any output audio from phone on the board while HFP session, so is there any way to control or verify the the source sink routing during the HFP session.

> What does pacmd list-cards show? Is the bluez device listed there? 

Yes, the bluez device is listed in the output,

	index: 1
	name: <bluez_card.CC_C3_EA_0A_15_90>
	driver: <module-bluez5-device.c>
	owner module: 24
	properties:
		device.description = "Jo XT1033"
		device.string = "CC:C3:EA:0A:17:97"
		device.api = "bluez"
		device.class = "sound"
		device.bus = "bluetooth"
		device.form_factor = "phone"
		bluez.path = "/org/bluez/hci0/dev_CC_C3_EA_0A_15_90"
		bluez.class = "0x5a020c"
		bluez.alias = "Jo_XT1033"
		device.icon_name = "audio-card-bluetooth"
	profiles:
		a2dp_source: High Fidelity Capture (A2DP Source) (priority 10, available: unknown)
		headset_audio_gateway: Headset Audio Gateway (HSP/HFP) (priority 20, available: no)
		off: Off (priority 0, available: yes)
	active profile: <a2dp_source>
	sources:
		bluez_source.CC_C3_EA_0A_15_90/#2: Jo XT1033
	ports:
		phone-output: Phone (priority 0, latency offset 0 usec, available: no)
			properties:
				
		phone-input: Phone (priority 0, latency offset 0 usec, available: unknown)
			properties:
					
> Can you check (with pavucontrol
> or in the logs) if the loopback from the phone goes to the correct sink? 

As per the level changes shown in pavucontrol the audio from the other end of the phone reaching the bluez source, but level changes are not shown in the default sink, so i assume that the routing doesn't work between bluez source to default sink, also i didnt find much info about this on logs, what should i look for ?

> Do you see messages in the
> pulseaudio debug log from both loopback modules?

yes, Other than the module load messages i didn't find much (oh sure, discarding all the "Could not peek into queue" and "Requesting rewind due to end of underrun" )

	[pulseaudio] module.c: Loaded "module-loopback" (index: #41; argument: "sink="bluez_sink.CC_C3_EA_0A_15_90" sink_dont_move="true" source_output_properties="media.role=phone"").
	[bluetooth] module-loopback.c: Max request changed
	[bluetooth] module-loopback.c: Skipping 6218 bytes
	[pulseaudio] module.c: Loaded "module-loopback" (index: #42; argument: "source="bluez_source.CC_C3_EA_0A_15_90" source_dont_move="true" sink_input_properties="media.role=phone"").
	[pulseaudio] module-loopback.c: Loopback overall latency is 353.36 ms + 2.50 ms + 4.62 ms = 360.47 ms
	[pulseaudio] module-loopback.c: Should buffer 96 bytes, buffered at minimum 0 bytes
	.
	.
	[pulseaudio] module-loopback.c: Loopback overall latency is 854.23 ms + 13.00 ms + 16.09 ms = 883.32 ms
	[pulseaudio] module-loopback.c: Should buffer 96 bytes, buffered at minimum 0 bytes
	[pulseaudio] module-loopback.c: [bluez_sink.CC_C3_EA_0A_15_90] Updated sampling rate to 8000 Hz.
	[alsa-sink-HiFi wm8962-0] module-loopback.c: Max request changed
	[alsa-sink-HiFi wm8962-0] module-loopback.c: Max request changed


With Regards,
John J