[pulseaudio-discuss] [PATCH v5 5/7] bluetooth: Modular API for A2DP codecs
Pali Rohár
pali.rohar at gmail.com
Sat Jan 19 17:11:54 UTC 2019
This patch introduce new modular API for bluetooth A2DP codecs. Its
benefits are:
* bluez5-util and module-bluez5-device does not contain any codec specific
code, they are codec independent.
* For adding new A2DP codec it is needed just to adjust one table in
a2dp-codec-util.c file. All codec specific functions are in separate
codec file.
* Support for backchannel (microphone voice). Some A2DP codecs (like
FastStream or aptX Low Latency) are bi-directional and can be used for
both music playback and audio call.
* Support for more configurations per codec. This allows to implement low
quality mode of some codec together with high quality.
* Support for changing A2DP codec at runtime. This needs new version of
bluez daemon which provide needed DBus API.
* Show current used A2DP codec in card profile. module-bluez5-device now
exports for every A2DP codec separate card profile. Getting list of
supported codecs by remote device is supported only by new version of
bluez daemon. If old version is detected then profile is created for
every codec supported by pulseaudio (therefore also codecs unavailable by
remote endpoint). Old version of bluez daemon does not support profile
switching, so unavailable profile codecs are harmless.
Current SBC codec implementation was moved from bluez5-util and
module-bluez5-device to its own file and converted to this new A2DP API.
Limitations:
Because A2DP codec switching is not atomic and needs more asynchronous DBus
calls, it is not easy or maybe not even possible to implement it properly
via pa_card_set_profile() function.
Currently after pa_card_set_profile() is invoked, module-bluez5-device
sends asynchronous request to bluez daemon for switching A2DP codec and
returns error that switching failed. After bluez daemon together with
pulseaudio's bluez5-util and bluetooth headset decide on new codec
configuration and establish new transport, it is possible to call
pa_card_set_profile() again to switch profile to newly chosen A2DP codec.
---
src/Makefile.am | 12 +-
src/modules/bluetooth/a2dp-codec-api.h | 80 +++
src/modules/bluetooth/a2dp-codec-sbc.c | 638 +++++++++++++++++++
src/modules/bluetooth/a2dp-codec-util.c | 56 ++
src/modules/bluetooth/a2dp-codec-util.h | 34 ++
src/modules/bluetooth/bluez5-util.c | 768 +++++++++++++++--------
src/modules/bluetooth/bluez5-util.h | 40 +-
src/modules/bluetooth/module-bluez5-device.c | 884 +++++++++++++--------------
8 files changed, 1791 insertions(+), 721 deletions(-)
create mode 100644 src/modules/bluetooth/a2dp-codec-api.h
create mode 100644 src/modules/bluetooth/a2dp-codec-sbc.c
create mode 100644 src/modules/bluetooth/a2dp-codec-util.c
create mode 100644 src/modules/bluetooth/a2dp-codec-util.h
diff --git a/src/Makefile.am b/src/Makefile.am
index 89f532278..5ef870e32 100644
--- a/src/Makefile.am
+++ b/src/Makefile.am
@@ -2131,6 +2131,9 @@ module_bluetooth_discover_la_CFLAGS = $(AM_CFLAGS) -DPA_MODULE_NAME=module_bluet
libbluez5_util_la_SOURCES = \
modules/bluetooth/bluez5-util.c \
modules/bluetooth/bluez5-util.h \
+ modules/bluetooth/a2dp-codec-api.h \
+ modules/bluetooth/a2dp-codec-util.c \
+ modules/bluetooth/a2dp-codec-util.h \
modules/bluetooth/a2dp-codecs.h \
modules/bluetooth/rtp.h
if HAVE_BLUEZ_5_OFONO_HEADSET
@@ -2145,6 +2148,11 @@ endif
libbluez5_util_la_LDFLAGS = -avoid-version
libbluez5_util_la_LIBADD = $(MODULE_LIBADD) $(DBUS_LIBS)
libbluez5_util_la_CFLAGS = $(AM_CFLAGS) $(DBUS_CFLAGS)
+libbluez5_util_la_CPPFLAGS = $(AM_CPPFLAGS)
+
+libbluez5_util_la_SOURCES += modules/bluetooth/a2dp-codec-sbc.c
+libbluez5_util_la_LIBADD += $(SBC_LIBS)
+libbluez5_util_la_CFLAGS += $(SBC_CFLAGS)
module_bluez5_discover_la_SOURCES = modules/bluetooth/module-bluez5-discover.c
module_bluez5_discover_la_LDFLAGS = $(MODULE_LDFLAGS)
@@ -2153,8 +2161,8 @@ module_bluez5_discover_la_CFLAGS = $(AM_CFLAGS) $(DBUS_CFLAGS) -DPA_MODULE_NAME=
module_bluez5_device_la_SOURCES = modules/bluetooth/module-bluez5-device.c
module_bluez5_device_la_LDFLAGS = $(MODULE_LDFLAGS)
-module_bluez5_device_la_LIBADD = $(MODULE_LIBADD) $(SBC_LIBS) libbluez5-util.la
-module_bluez5_device_la_CFLAGS = $(AM_CFLAGS) $(SBC_CFLAGS) -DPA_MODULE_NAME=module_bluez5_device
+module_bluez5_device_la_LIBADD = $(MODULE_LIBADD) libbluez5-util.la
+module_bluez5_device_la_CFLAGS = $(AM_CFLAGS) -DPA_MODULE_NAME=module_bluez5_device
# Apple Airtunes/RAOP
module_raop_sink_la_SOURCES = modules/raop/module-raop-sink.c
diff --git a/src/modules/bluetooth/a2dp-codec-api.h b/src/modules/bluetooth/a2dp-codec-api.h
new file mode 100644
index 000000000..cc678ef2b
--- /dev/null
+++ b/src/modules/bluetooth/a2dp-codec-api.h
@@ -0,0 +1,80 @@
+#ifndef fooa2dpcodechfoo
+#define fooa2dpcodechfoo
+
+/***
+ This file is part of PulseAudio.
+
+ Copyright 2018-2019 Pali Rohár <pali.rohar at gmail.com>
+
+ PulseAudio is free software; you can redistribute it and/or modify
+ it under the terms of the GNU Lesser General Public License as
+ published by the Free Software Foundation; either version 2.1 of the
+ License, or (at your option) any later version.
+
+ PulseAudio is distributed in the hope that it will be useful, but
+ WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ General Public License for more details.
+
+ You should have received a copy of the GNU Lesser General Public
+ License along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
+***/
+
+#include <pulsecore/core.h>
+
+typedef struct pa_a2dp_codec_capabilities {
+ uint8_t size;
+ uint8_t buffer[]; /* max size is 254 bytes */
+} pa_a2dp_codec_capabilities;
+
+typedef struct pa_a2dp_codec_id {
+ uint8_t codec_id;
+ uint32_t vendor_id;
+ uint16_t vendor_codec_id;
+} pa_a2dp_codec_id;
+
+typedef struct pa_a2dp_codec {
+ /* Unique name of the codec, lowercase and without whitespaces, used for constructing identifier, D-Bus paths, ... */
+ const char *codec_name;
+ /* Human readable codec description */
+ const char *codec_description;
+
+ /* A2DP codec id */
+ pa_a2dp_codec_id codec_id;
+
+ /* True if codec is bi-directional and supports backchannel */
+ bool support_backchannel;
+
+ /* Returns true if codec accepts capabilities, for_encoding is true when capabilities are used for encoding */
+ bool (*accept_capabilities)(const uint8_t *capabilities_buffer, uint8_t capabilities_size, bool for_encoding);
+ /* Choose preferred capabilities from hash map (const char * -> const pa_a2dp_codec_capabilities *) and returns corresponding key, for encoder is true when capabilities hash map is used for encoding */
+ const char *(*choose_capabilities)(const pa_hashmap *capabilities_hashmap, bool for_encoding);
+ /* Fill codec capabilities, returns size of filled buffer */
+ uint8_t (*fill_capabilities)(uint8_t capabilities_buffer[254]);
+ /* Validate codec configuration, returns true on success */
+ bool (*validate_configuration)(const uint8_t *config_buffer, uint8_t config_size);
+ /* Fill preferred codec configuration, returns size of filled buffer */
+ uint8_t (*fill_preferred_configuration)(const pa_sample_spec *default_sample_spec, const uint8_t *capabilities_buffer, uint8_t capabilities_size, uint8_t config_buffer[254]);
+
+ /* Initialize codec, returns codec info data and set sample_spec, for_encoding is true when codec_info is used for encoding, for_backchannel is true when codec_info is used for backchannel */
+ void *(*init_codec)(bool for_encoding, bool for_backchannel, const uint8_t *config_buffer, uint8_t config_size, pa_sample_spec *sample_spec);
+ /* Deinitialize and release codec info data in codec_info */
+ void (*finish_codec)(void *codec_info);
+ /* Reset internal state of codec info data in codec_info */
+ void (*reset_codec)(void *codec_info);
+
+ /* Get read block size for codec */
+ size_t (*get_read_block_size)(void *codec_info, size_t read_link_mtu);
+ /* Get write block size for codec */
+ size_t (*get_write_block_size)(void *codec_info, size_t write_link_mtu);
+
+ /* Reduce encoder bitrate for codec, returns new write block size or zero if not changed, called when socket is not accepting encoded data fast enough */
+ size_t (*reduce_encoder_bitrate)(void *codec_info, size_t write_link_mtu);
+
+ /* Encode input_buffer of input_size to output_buffer of output_size, returns size of filled ouput_buffer and set processed to size of processed input_buffer */
+ size_t (*encode_buffer)(void *codec_info, uint32_t timestamp, const uint8_t *input_buffer, size_t input_size, uint8_t *output_buffer, size_t output_size, size_t *processed);
+ /* Decode input_buffer of input_size to output_buffer of output_size, returns size of filled ouput_buffer and set processed to size of processed input_buffer */
+ size_t (*decode_buffer)(void *codec_info, const uint8_t *input_buffer, size_t input_size, uint8_t *output_buffer, size_t output_size, size_t *processed);
+} pa_a2dp_codec;
+
+#endif
diff --git a/src/modules/bluetooth/a2dp-codec-sbc.c b/src/modules/bluetooth/a2dp-codec-sbc.c
new file mode 100644
index 000000000..c43ee8be9
--- /dev/null
+++ b/src/modules/bluetooth/a2dp-codec-sbc.c
@@ -0,0 +1,638 @@
+/***
+ This file is part of PulseAudio.
+
+ Copyright 2018-2019 Pali Rohár <pali.rohar at gmail.com>
+
+ PulseAudio is free software; you can redistribute it and/or modify
+ it under the terms of the GNU Lesser General Public License as
+ published by the Free Software Foundation; either version 2.1 of the
+ License, or (at your option) any later version.
+
+ PulseAudio is distributed in the hope that it will be useful, but
+ WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ General Public License for more details.
+
+ You should have received a copy of the GNU Lesser General Public
+ License along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
+***/
+
+#ifdef HAVE_CONFIG_H
+#include <config.h>
+#endif
+
+#include <pulsecore/core-util.h>
+#include <pulsecore/log.h>
+#include <pulsecore/macro.h>
+#include <pulsecore/once.h>
+#include <pulse/sample.h>
+#include <pulse/xmalloc.h>
+
+#include <arpa/inet.h>
+
+#include <sbc/sbc.h>
+
+#include "a2dp-codecs.h"
+#include "a2dp-codec-api.h"
+#include "rtp.h"
+
+#define SBC_BITPOOL_DEC_LIMIT 32
+#define SBC_BITPOOL_DEC_STEP 5
+
+struct sbc_info {
+ sbc_t sbc; /* Codec data */
+ size_t codesize, frame_length; /* SBC Codesize, frame_length. We simply cache those values here */
+ uint16_t seq_num; /* Cumulative packet sequence */
+ uint8_t frequency;
+ uint8_t blocks;
+ uint8_t subbands;
+ uint8_t mode;
+ uint8_t allocation;
+ uint8_t bitpool;
+ uint8_t min_bitpool;
+ uint8_t max_bitpool;
+};
+
+static bool accept_capabilities(const uint8_t *capabilities_buffer, uint8_t capabilities_size, bool for_encoding) {
+ const a2dp_sbc_t *capabilities = (const a2dp_sbc_t *) capabilities_buffer;
+
+ if (capabilities_size != sizeof(*capabilities))
+ return false;
+
+ if (!(capabilities->frequency & (SBC_SAMPLING_FREQ_16000 | SBC_SAMPLING_FREQ_32000 | SBC_SAMPLING_FREQ_44100 | SBC_SAMPLING_FREQ_48000)))
+ return false;
+
+ if (!(capabilities->channel_mode & (SBC_CHANNEL_MODE_MONO | SBC_CHANNEL_MODE_DUAL_CHANNEL | SBC_CHANNEL_MODE_STEREO | SBC_CHANNEL_MODE_JOINT_STEREO)))
+ return false;
+
+ if (!(capabilities->allocation_method & (SBC_ALLOCATION_SNR | SBC_ALLOCATION_LOUDNESS)))
+ return false;
+
+ if (!(capabilities->subbands & (SBC_SUBBANDS_4 | SBC_SUBBANDS_8)))
+ return false;
+
+ if (!(capabilities->block_length & (SBC_BLOCK_LENGTH_4 | SBC_BLOCK_LENGTH_8 | SBC_BLOCK_LENGTH_12 | SBC_BLOCK_LENGTH_16)))
+ return false;
+
+ return true;
+}
+
+static const char *choose_capabilities(const pa_hashmap *capabilities_hashmap, bool for_encoding) {
+ const pa_a2dp_codec_capabilities *a2dp_capabilities;
+ const char *key;
+ void *state;
+
+ /* There is no preference, just choose random valid entry */
+ PA_HASHMAP_FOREACH_KV(key, a2dp_capabilities, capabilities_hashmap, state) {
+ if (accept_capabilities(a2dp_capabilities->buffer, a2dp_capabilities->size, for_encoding))
+ return key;
+ }
+
+ return NULL;
+}
+
+static uint8_t fill_capabilities(uint8_t capabilities_buffer[254]) {
+ a2dp_sbc_t *capabilities = (a2dp_sbc_t *) capabilities_buffer;
+
+ pa_zero(*capabilities);
+
+ capabilities->channel_mode = SBC_CHANNEL_MODE_MONO | SBC_CHANNEL_MODE_DUAL_CHANNEL | SBC_CHANNEL_MODE_STEREO |
+ SBC_CHANNEL_MODE_JOINT_STEREO;
+ capabilities->frequency = SBC_SAMPLING_FREQ_16000 | SBC_SAMPLING_FREQ_32000 | SBC_SAMPLING_FREQ_44100 |
+ SBC_SAMPLING_FREQ_48000;
+ capabilities->allocation_method = SBC_ALLOCATION_SNR | SBC_ALLOCATION_LOUDNESS;
+ capabilities->subbands = SBC_SUBBANDS_4 | SBC_SUBBANDS_8;
+ capabilities->block_length = SBC_BLOCK_LENGTH_4 | SBC_BLOCK_LENGTH_8 | SBC_BLOCK_LENGTH_12 | SBC_BLOCK_LENGTH_16;
+ capabilities->min_bitpool = SBC_MIN_BITPOOL;
+ capabilities->max_bitpool = SBC_MAX_BITPOOL;
+
+ return sizeof(*capabilities);
+}
+
+static bool validate_configuration(const uint8_t *config_buffer, uint8_t config_size) {
+ const a2dp_sbc_t *config = (const a2dp_sbc_t *) config_buffer;
+
+ if (config_size != sizeof(*config)) {
+ pa_log_error("Invalid size of config buffer");
+ return false;
+ }
+
+ if (config->frequency != SBC_SAMPLING_FREQ_16000 && config->frequency != SBC_SAMPLING_FREQ_32000 &&
+ config->frequency != SBC_SAMPLING_FREQ_44100 && config->frequency != SBC_SAMPLING_FREQ_48000) {
+ pa_log_error("Invalid sampling frequency in configuration");
+ return false;
+ }
+
+ if (config->channel_mode != SBC_CHANNEL_MODE_MONO && config->channel_mode != SBC_CHANNEL_MODE_DUAL_CHANNEL &&
+ config->channel_mode != SBC_CHANNEL_MODE_STEREO && config->channel_mode != SBC_CHANNEL_MODE_JOINT_STEREO) {
+ pa_log_error("Invalid channel mode in configuration");
+ return false;
+ }
+
+ if (config->allocation_method != SBC_ALLOCATION_SNR && config->allocation_method != SBC_ALLOCATION_LOUDNESS) {
+ pa_log_error("Invalid allocation method in configuration");
+ return false;
+ }
+
+ if (config->subbands != SBC_SUBBANDS_4 && config->subbands != SBC_SUBBANDS_8) {
+ pa_log_error("Invalid SBC subbands in configuration");
+ return false;
+ }
+
+ if (config->block_length != SBC_BLOCK_LENGTH_4 && config->block_length != SBC_BLOCK_LENGTH_8 &&
+ config->block_length != SBC_BLOCK_LENGTH_12 && config->block_length != SBC_BLOCK_LENGTH_16) {
+ pa_log_error("Invalid block length in configuration");
+ return false;
+ }
+
+ return true;
+}
+
+static uint8_t default_bitpool(uint8_t freq, uint8_t mode) {
+ /* These bitpool values were chosen based on the A2DP spec recommendation */
+ switch (freq) {
+ case SBC_SAMPLING_FREQ_16000:
+ case SBC_SAMPLING_FREQ_32000:
+ return 53;
+
+ case SBC_SAMPLING_FREQ_44100:
+
+ switch (mode) {
+ case SBC_CHANNEL_MODE_MONO:
+ case SBC_CHANNEL_MODE_DUAL_CHANNEL:
+ return 31;
+
+ case SBC_CHANNEL_MODE_STEREO:
+ case SBC_CHANNEL_MODE_JOINT_STEREO:
+ return 53;
+ }
+
+ pa_log_warn("Invalid channel mode %u", mode);
+ return 53;
+
+ case SBC_SAMPLING_FREQ_48000:
+
+ switch (mode) {
+ case SBC_CHANNEL_MODE_MONO:
+ case SBC_CHANNEL_MODE_DUAL_CHANNEL:
+ return 29;
+
+ case SBC_CHANNEL_MODE_STEREO:
+ case SBC_CHANNEL_MODE_JOINT_STEREO:
+ return 51;
+ }
+
+ pa_log_warn("Invalid channel mode %u", mode);
+ return 51;
+ }
+
+ pa_log_warn("Invalid sampling freq %u", freq);
+ return 53;
+}
+
+static uint8_t fill_preferred_configuration(const pa_sample_spec *default_sample_spec, const uint8_t *capabilities_buffer, uint8_t capabilities_size, uint8_t config_buffer[254]) {
+ a2dp_sbc_t *config = (a2dp_sbc_t *) config_buffer;
+ const a2dp_sbc_t *capabilities = (const a2dp_sbc_t *) capabilities_buffer;
+ int i;
+
+ static const struct {
+ uint32_t rate;
+ uint8_t cap;
+ } freq_table[] = {
+ { 16000U, SBC_SAMPLING_FREQ_16000 },
+ { 32000U, SBC_SAMPLING_FREQ_32000 },
+ { 44100U, SBC_SAMPLING_FREQ_44100 },
+ { 48000U, SBC_SAMPLING_FREQ_48000 }
+ };
+
+ if (capabilities_size != sizeof(*capabilities)) {
+ pa_log_error("Invalid size of capabilities buffer");
+ return 0;
+ }
+
+ pa_zero(*config);
+
+ /* Find the lowest freq that is at least as high as the requested sampling rate */
+ for (i = 0; (unsigned) i < PA_ELEMENTSOF(freq_table); i++)
+ if (freq_table[i].rate >= default_sample_spec->rate && (capabilities->frequency & freq_table[i].cap)) {
+ config->frequency = freq_table[i].cap;
+ break;
+ }
+
+ if ((unsigned) i == PA_ELEMENTSOF(freq_table)) {
+ for (--i; i >= 0; i--) {
+ if (capabilities->frequency & freq_table[i].cap) {
+ config->frequency = freq_table[i].cap;
+ break;
+ }
+ }
+
+ if (i < 0) {
+ pa_log_error("Not suitable sample rate");
+ return 0;
+ }
+ }
+
+ pa_assert((unsigned) i < PA_ELEMENTSOF(freq_table));
+
+ if (default_sample_spec->channels <= 1) {
+ if (capabilities->channel_mode & SBC_CHANNEL_MODE_MONO)
+ config->channel_mode = SBC_CHANNEL_MODE_MONO;
+ else if (capabilities->channel_mode & SBC_CHANNEL_MODE_JOINT_STEREO)
+ config->channel_mode = SBC_CHANNEL_MODE_JOINT_STEREO;
+ else if (capabilities->channel_mode & SBC_CHANNEL_MODE_STEREO)
+ config->channel_mode = SBC_CHANNEL_MODE_STEREO;
+ else if (capabilities->channel_mode & SBC_CHANNEL_MODE_DUAL_CHANNEL)
+ config->channel_mode = SBC_CHANNEL_MODE_DUAL_CHANNEL;
+ else {
+ pa_log_error("No supported channel modes");
+ return 0;
+ }
+ } else {
+ if (capabilities->channel_mode & SBC_CHANNEL_MODE_JOINT_STEREO)
+ config->channel_mode = SBC_CHANNEL_MODE_JOINT_STEREO;
+ else if (capabilities->channel_mode & SBC_CHANNEL_MODE_STEREO)
+ config->channel_mode = SBC_CHANNEL_MODE_STEREO;
+ else if (capabilities->channel_mode & SBC_CHANNEL_MODE_DUAL_CHANNEL)
+ config->channel_mode = SBC_CHANNEL_MODE_DUAL_CHANNEL;
+ else if (capabilities->channel_mode & SBC_CHANNEL_MODE_MONO)
+ config->channel_mode = SBC_CHANNEL_MODE_MONO;
+ else {
+ pa_log_error("No supported channel modes");
+ return 0;
+ }
+ }
+
+ if (capabilities->block_length & SBC_BLOCK_LENGTH_16)
+ config->block_length = SBC_BLOCK_LENGTH_16;
+ else if (capabilities->block_length & SBC_BLOCK_LENGTH_12)
+ config->block_length = SBC_BLOCK_LENGTH_12;
+ else if (capabilities->block_length & SBC_BLOCK_LENGTH_8)
+ config->block_length = SBC_BLOCK_LENGTH_8;
+ else if (capabilities->block_length & SBC_BLOCK_LENGTH_4)
+ config->block_length = SBC_BLOCK_LENGTH_4;
+ else {
+ pa_log_error("No supported block lengths");
+ return 0;
+ }
+
+ if (capabilities->subbands & SBC_SUBBANDS_8)
+ config->subbands = SBC_SUBBANDS_8;
+ else if (capabilities->subbands & SBC_SUBBANDS_4)
+ config->subbands = SBC_SUBBANDS_4;
+ else {
+ pa_log_error("No supported subbands");
+ return 0;
+ }
+
+ if (capabilities->allocation_method & SBC_ALLOCATION_LOUDNESS)
+ config->allocation_method = SBC_ALLOCATION_LOUDNESS;
+ else if (capabilities->allocation_method & SBC_ALLOCATION_SNR)
+ config->allocation_method = SBC_ALLOCATION_SNR;
+ else {
+ pa_log_error("No supported allocation method");
+ return 0;
+ }
+
+ config->min_bitpool = (uint8_t) PA_MAX(SBC_MIN_BITPOOL, capabilities->min_bitpool);
+ config->max_bitpool = (uint8_t) PA_MIN(default_bitpool(config->frequency, config->channel_mode), capabilities->max_bitpool);
+
+ if (config->min_bitpool > config->max_bitpool)
+ return 0;
+
+ return sizeof(*config);
+}
+
+static void set_params(struct sbc_info *sbc_info) {
+ sbc_info->sbc.frequency = sbc_info->frequency;
+ sbc_info->sbc.blocks = sbc_info->blocks;
+ sbc_info->sbc.subbands = sbc_info->subbands;
+ sbc_info->sbc.mode = sbc_info->mode;
+ sbc_info->sbc.allocation = sbc_info->allocation;
+ sbc_info->sbc.bitpool = sbc_info->bitpool;
+
+ sbc_info->codesize = sbc_get_codesize(&sbc_info->sbc);
+ sbc_info->frame_length = sbc_get_frame_length(&sbc_info->sbc);
+}
+
+static void *init_codec(bool for_encoding, bool for_backchannel, const uint8_t *config_buffer, uint8_t config_size, pa_sample_spec *sample_spec) {
+ struct sbc_info *sbc_info;
+ const a2dp_sbc_t *config = (const a2dp_sbc_t *) config_buffer;
+ int ret;
+
+ pa_assert(config_size == sizeof(*config));
+ pa_assert(!for_backchannel);
+
+ sbc_info = pa_xnew0(struct sbc_info, 1);
+
+ ret = sbc_init(&sbc_info->sbc, 0);
+ if (ret != 0) {
+ pa_xfree(sbc_info);
+ pa_log_error("SBC initialization failed: %d", ret);
+ return NULL;
+ }
+
+ sample_spec->format = PA_SAMPLE_S16LE;
+
+ switch (config->frequency) {
+ case SBC_SAMPLING_FREQ_16000:
+ sbc_info->frequency = SBC_FREQ_16000;
+ sample_spec->rate = 16000U;
+ break;
+ case SBC_SAMPLING_FREQ_32000:
+ sbc_info->frequency = SBC_FREQ_32000;
+ sample_spec->rate = 32000U;
+ break;
+ case SBC_SAMPLING_FREQ_44100:
+ sbc_info->frequency = SBC_FREQ_44100;
+ sample_spec->rate = 44100U;
+ break;
+ case SBC_SAMPLING_FREQ_48000:
+ sbc_info->frequency = SBC_FREQ_48000;
+ sample_spec->rate = 48000U;
+ break;
+ default:
+ pa_assert_not_reached();
+ }
+
+ switch (config->channel_mode) {
+ case SBC_CHANNEL_MODE_MONO:
+ sbc_info->mode = SBC_MODE_MONO;
+ sample_spec->channels = 1;
+ break;
+ case SBC_CHANNEL_MODE_DUAL_CHANNEL:
+ sbc_info->mode = SBC_MODE_DUAL_CHANNEL;
+ sample_spec->channels = 2;
+ break;
+ case SBC_CHANNEL_MODE_STEREO:
+ sbc_info->mode = SBC_MODE_STEREO;
+ sample_spec->channels = 2;
+ break;
+ case SBC_CHANNEL_MODE_JOINT_STEREO:
+ sbc_info->mode = SBC_MODE_JOINT_STEREO;
+ sample_spec->channels = 2;
+ break;
+ default:
+ pa_assert_not_reached();
+ }
+
+ switch (config->allocation_method) {
+ case SBC_ALLOCATION_SNR:
+ sbc_info->allocation = SBC_AM_SNR;
+ break;
+ case SBC_ALLOCATION_LOUDNESS:
+ sbc_info->allocation = SBC_AM_LOUDNESS;
+ break;
+ default:
+ pa_assert_not_reached();
+ }
+
+ switch (config->subbands) {
+ case SBC_SUBBANDS_4:
+ sbc_info->subbands = SBC_SB_4;
+ break;
+ case SBC_SUBBANDS_8:
+ sbc_info->subbands = SBC_SB_8;
+ break;
+ default:
+ pa_assert_not_reached();
+ }
+
+ switch (config->block_length) {
+ case SBC_BLOCK_LENGTH_4:
+ sbc_info->blocks = SBC_BLK_4;
+ break;
+ case SBC_BLOCK_LENGTH_8:
+ sbc_info->blocks = SBC_BLK_8;
+ break;
+ case SBC_BLOCK_LENGTH_12:
+ sbc_info->blocks = SBC_BLK_12;
+ break;
+ case SBC_BLOCK_LENGTH_16:
+ sbc_info->blocks = SBC_BLK_16;
+ break;
+ default:
+ pa_assert_not_reached();
+ }
+
+ sbc_info->min_bitpool = config->min_bitpool;
+ sbc_info->max_bitpool = config->max_bitpool;
+
+ /* Set minimum bitpool for source to get the maximum possible block_size */
+ sbc_info->bitpool = for_encoding ? sbc_info->max_bitpool : sbc_info->min_bitpool;
+
+ set_params(sbc_info);
+
+ PA_ONCE_BEGIN {
+ pa_log_debug("Using SBC codec implementation: %s", pa_strnull(sbc_get_implementation_info(&sbc_info->sbc)));
+ } PA_ONCE_END;
+
+ pa_log_info("SBC parameters: allocation=%u, subbands=%u, blocks=%u, bitpool=%u",
+ sbc_info->sbc.allocation, sbc_info->sbc.subbands ? 8 : 4, sbc_info->sbc.blocks, sbc_info->sbc.bitpool);
+
+ return sbc_info;
+}
+
+static void finish_codec(void *codec_info) {
+ struct sbc_info *sbc_info = (struct sbc_info *) codec_info;
+
+ sbc_finish(&sbc_info->sbc);
+ pa_xfree(sbc_info);
+}
+
+static void set_bitpool(struct sbc_info *sbc_info, uint8_t bitpool) {
+ if (bitpool > sbc_info->max_bitpool)
+ bitpool = sbc_info->max_bitpool;
+ else if (bitpool < sbc_info->min_bitpool)
+ bitpool = sbc_info->min_bitpool;
+
+ sbc_info->sbc.bitpool = bitpool;
+
+ sbc_info->codesize = sbc_get_codesize(&sbc_info->sbc);
+ sbc_info->frame_length = sbc_get_frame_length(&sbc_info->sbc);
+
+ pa_log_debug("Bitpool has changed to %u", sbc_info->sbc.bitpool);
+}
+
+static void reset_codec(void *codec_info) {
+ struct sbc_info *sbc_info = (struct sbc_info *) codec_info;
+ int ret;
+
+ ret = sbc_reinit(&sbc_info->sbc, 0);
+ if (ret != 0) {
+ pa_log_error("SBC reinitialization failed: %d", ret);
+ return;
+ }
+
+ /* sbc_reinit() sets also default parameters, so reset them back */
+ set_params(sbc_info);
+
+ sbc_info->seq_num = 0;
+}
+
+static size_t get_block_size(void *codec_info, size_t link_mtu) {
+ struct sbc_info *sbc_info = (struct sbc_info *) codec_info;
+
+ return (link_mtu - sizeof(struct rtp_header) - sizeof(struct rtp_payload))
+ / sbc_info->frame_length * sbc_info->codesize;
+}
+
+static size_t reduce_encoder_bitrate(void *codec_info, size_t write_link_mtu) {
+ struct sbc_info *sbc_info = (struct sbc_info *) codec_info;
+ uint8_t bitpool;
+
+ /* Check if bitpool is already at its limit */
+ if (sbc_info->sbc.bitpool <= SBC_BITPOOL_DEC_LIMIT)
+ return 0;
+
+ bitpool = sbc_info->sbc.bitpool - SBC_BITPOOL_DEC_STEP;
+
+ if (bitpool < SBC_BITPOOL_DEC_LIMIT)
+ bitpool = SBC_BITPOOL_DEC_LIMIT;
+
+ if (sbc_info->sbc.bitpool == bitpool)
+ return 0;
+
+ set_bitpool(sbc_info, bitpool);
+ return get_block_size(codec_info, write_link_mtu);
+}
+
+static size_t encode_buffer(void *codec_info, uint32_t timestamp, const uint8_t *input_buffer, size_t input_size, uint8_t *output_buffer, size_t output_size, size_t *processed) {
+ struct sbc_info *sbc_info = (struct sbc_info *) codec_info;
+ struct rtp_header *header;
+ struct rtp_payload *payload;
+ uint8_t *d;
+ const uint8_t *p;
+ size_t to_write, to_encode;
+ unsigned frame_count;
+
+ header = (struct rtp_header*) output_buffer;
+ payload = (struct rtp_payload*) (output_buffer + sizeof(*header));
+
+ frame_count = 0;
+
+ p = input_buffer;
+ to_encode = input_size;
+
+ d = output_buffer + sizeof(*header) + sizeof(*payload);
+ to_write = output_size - sizeof(*header) - sizeof(*payload);
+
+ while (PA_LIKELY(to_encode > 0 && to_write > 0)) {
+ ssize_t written;
+ ssize_t encoded;
+
+ encoded = sbc_encode(&sbc_info->sbc,
+ p, to_encode,
+ d, to_write,
+ &written);
+
+ if (PA_UNLIKELY(encoded <= 0)) {
+ pa_log_error("SBC encoding error (%li)", (long) encoded);
+ *processed = p - input_buffer;
+ return 0;
+ }
+
+ pa_assert_fp((size_t) encoded <= to_encode);
+ pa_assert_fp((size_t) encoded == sbc_info->codesize);
+
+ pa_assert_fp((size_t) written <= to_write);
+ pa_assert_fp((size_t) written == sbc_info->frame_length);
+
+ p += encoded;
+ to_encode -= encoded;
+
+ d += written;
+ to_write -= written;
+
+ frame_count++;
+ }
+
+ /* write it to the fifo */
+ memset(output_buffer, 0, sizeof(*header) + sizeof(*payload));
+ header->v = 2;
+
+ /* A2DP spec: "A payload type in the RTP dynamic range shall be chosen".
+ * RFC3551 defines the dynamic range to span from 96 to 127, and 96 appears
+ * to be the most common choice in A2DP implementations. */
+ header->pt = 96;
+
+ header->sequence_number = htons(sbc_info->seq_num++);
+ header->timestamp = htonl(timestamp);
+ header->ssrc = htonl(1);
+ payload->frame_count = frame_count;
+
+ *processed = p - input_buffer;
+ return d - output_buffer;
+}
+
+static size_t decode_buffer(void *codec_info, const uint8_t *input_buffer, size_t input_size, uint8_t *output_buffer, size_t output_size, size_t *processed) {
+ struct sbc_info *sbc_info = (struct sbc_info *) codec_info;
+
+ struct rtp_header *header;
+ struct rtp_payload *payload;
+ const uint8_t *p;
+ uint8_t *d;
+ size_t to_write, to_decode;
+
+ header = (struct rtp_header *) input_buffer;
+ payload = (struct rtp_payload*) (input_buffer + sizeof(*header));
+
+ p = input_buffer + sizeof(*header) + sizeof(*payload);
+ to_decode = input_size - sizeof(*header) - sizeof(*payload);
+
+ d = output_buffer;
+ to_write = output_size;
+
+ while (PA_LIKELY(to_decode > 0)) {
+ size_t written;
+ ssize_t decoded;
+
+ decoded = sbc_decode(&sbc_info->sbc,
+ p, to_decode,
+ d, to_write,
+ &written);
+
+ if (PA_UNLIKELY(decoded <= 0)) {
+ pa_log_error("SBC decoding error (%li)", (long) decoded);
+ *processed = p - input_buffer;
+ return 0;
+ }
+
+ /* Reset frame length, it can be changed due to bitpool change */
+ sbc_info->frame_length = sbc_get_frame_length(&sbc_info->sbc);
+
+ pa_assert_fp((size_t) decoded <= to_decode);
+ pa_assert_fp((size_t) decoded == sbc_info->frame_length);
+
+ pa_assert_fp((size_t) written == sbc_info->codesize);
+
+ p += decoded;
+ to_decode -= decoded;
+
+ d += written;
+ to_write -= written;
+ }
+
+ *processed = p - input_buffer;
+ return d - output_buffer;
+}
+
+const pa_a2dp_codec pa_a2dp_codec_sbc = {
+ .codec_name = "sbc",
+ .codec_description = "SBC",
+ .codec_id = { A2DP_CODEC_SBC, 0, 0 },
+ .support_backchannel = false,
+ .accept_capabilities = accept_capabilities,
+ .choose_capabilities = choose_capabilities,
+ .fill_capabilities = fill_capabilities,
+ .validate_configuration = validate_configuration,
+ .fill_preferred_configuration = fill_preferred_configuration,
+ .init_codec = init_codec,
+ .finish_codec = finish_codec,
+ .reset_codec = reset_codec,
+ .get_read_block_size = get_block_size,
+ .get_write_block_size = get_block_size,
+ .reduce_encoder_bitrate = reduce_encoder_bitrate,
+ .encode_buffer = encode_buffer,
+ .decode_buffer = decode_buffer,
+};
diff --git a/src/modules/bluetooth/a2dp-codec-util.c b/src/modules/bluetooth/a2dp-codec-util.c
new file mode 100644
index 000000000..27128d8ae
--- /dev/null
+++ b/src/modules/bluetooth/a2dp-codec-util.c
@@ -0,0 +1,56 @@
+/***
+ This file is part of PulseAudio.
+
+ Copyright 2019 Pali Rohár <pali.rohar at gmail.com>
+
+ PulseAudio is free software; you can redistribute it and/or modify
+ it under the terms of the GNU Lesser General Public License as
+ published by the Free Software Foundation; either version 2.1 of the
+ License, or (at your option) any later version.
+
+ PulseAudio is distributed in the hope that it will be useful, but
+ WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ General Public License for more details.
+
+ You should have received a copy of the GNU Lesser General Public
+ License along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
+***/
+
+#ifdef HAVE_CONFIG_H
+#include <config.h>
+#endif
+
+#include <pulsecore/core.h>
+#include <pulsecore/core-util.h>
+
+#include "a2dp-codec-util.h"
+
+extern const pa_a2dp_codec pa_a2dp_codec_sbc;
+
+/* This is list of supported codecs. Their order is important.
+ * Codec with higher index has higher priority. */
+const pa_a2dp_codec *pa_a2dp_codecs[] = {
+ &pa_a2dp_codec_sbc,
+};
+
+unsigned int pa_bluetooth_a2dp_codec_count(void) {
+ return PA_ELEMENTSOF(pa_a2dp_codecs);
+}
+
+const pa_a2dp_codec *pa_bluetooth_a2dp_codec_iter(unsigned int i) {
+ pa_assert(i < pa_bluetooth_a2dp_codec_count());
+ return pa_a2dp_codecs[i];
+}
+
+const pa_a2dp_codec *pa_bluetooth_a2dp_codec(const char *name) {
+ unsigned int i;
+ unsigned int count = pa_bluetooth_a2dp_codec_count();
+
+ for (i = 0; i < count; i++) {
+ if (pa_streq(pa_a2dp_codecs[i]->codec_name, name))
+ return pa_a2dp_codecs[i];
+ }
+
+ return NULL;
+}
diff --git a/src/modules/bluetooth/a2dp-codec-util.h b/src/modules/bluetooth/a2dp-codec-util.h
new file mode 100644
index 000000000..84a9d55f5
--- /dev/null
+++ b/src/modules/bluetooth/a2dp-codec-util.h
@@ -0,0 +1,34 @@
+#ifndef fooa2dpcodecutilhfoo
+#define fooa2dpcodecutilhfoo
+
+/***
+ This file is part of PulseAudio.
+
+ Copyright 2019 Pali Rohár <pali.rohar at gmail.com>
+
+ PulseAudio is free software; you can redistribute it and/or modify
+ it under the terms of the GNU Lesser General Public License as
+ published by the Free Software Foundation; either version 2.1 of the
+ License, or (at your option) any later version.
+
+ PulseAudio is distributed in the hope that it will be useful, but
+ WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ General Public License for more details.
+
+ You should have received a copy of the GNU Lesser General Public
+ License along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
+***/
+
+#include "a2dp-codec-api.h"
+
+/* Get number of supported A2DP codecs */
+unsigned int pa_bluetooth_a2dp_codec_count(void);
+
+/* Get i-th codec. Codec with higher number has higher priority */
+const pa_a2dp_codec *pa_bluetooth_a2dp_codec_iter(unsigned int i);
+
+/* Get codec by name */
+const pa_a2dp_codec *pa_bluetooth_a2dp_codec(const char *name);
+
+#endif
diff --git a/src/modules/bluetooth/bluez5-util.c b/src/modules/bluetooth/bluez5-util.c
index 48b147eed..689b533f0 100644
--- a/src/modules/bluetooth/bluez5-util.c
+++ b/src/modules/bluetooth/bluez5-util.c
@@ -2,6 +2,7 @@
This file is part of PulseAudio.
Copyright 2008-2013 João Paulo Rechi Vita
+ Copyrigth 2018-2019 Pali Rohár <pali.rohar at gmail.com>
PulseAudio is free software; you can redistribute it and/or modify
it under the terms of the GNU Lesser General Public License as
@@ -33,6 +34,7 @@
#include <pulsecore/refcnt.h>
#include <pulsecore/shared.h>
+#include "a2dp-codec-util.h"
#include "a2dp-codecs.h"
#include "bluez5-util.h"
@@ -169,11 +171,13 @@ static const char *transport_state_to_string(pa_bluetooth_transport_state_t stat
}
static bool device_supports_profile(pa_bluetooth_device *device, pa_bluetooth_profile_t profile) {
+ const pa_a2dp_codec_capabilities *a2dp_codec_capabilities;
+ const pa_a2dp_codec *a2dp_codec;
+ bool is_a2dp_sink;
+ pa_hashmap *endpoints;
+ void *state;
+
switch (profile) {
- case PA_BLUETOOTH_PROFILE_A2DP_SINK:
- return !!pa_hashmap_get(device->uuids, PA_BLUETOOTH_UUID_A2DP_SINK);
- case PA_BLUETOOTH_PROFILE_A2DP_SOURCE:
- return !!pa_hashmap_get(device->uuids, PA_BLUETOOTH_UUID_A2DP_SOURCE);
case PA_BLUETOOTH_PROFILE_HEADSET_HEAD_UNIT:
return !!pa_hashmap_get(device->uuids, PA_BLUETOOTH_UUID_HSP_HS)
|| !!pa_hashmap_get(device->uuids, PA_BLUETOOTH_UUID_HSP_HS_ALT)
@@ -182,10 +186,33 @@ static bool device_supports_profile(pa_bluetooth_device *device, pa_bluetooth_pr
return !!pa_hashmap_get(device->uuids, PA_BLUETOOTH_UUID_HSP_AG)
|| !!pa_hashmap_get(device->uuids, PA_BLUETOOTH_UUID_HFP_AG);
case PA_BLUETOOTH_PROFILE_OFF:
- pa_assert_not_reached();
+ return true;
+ default:
+ break;
}
- pa_assert_not_reached();
+ a2dp_codec = pa_bluetooth_profile_to_a2dp_codec(profile);
+ is_a2dp_sink = pa_bluetooth_profile_is_a2dp_sink(profile);
+
+ if (is_a2dp_sink && !pa_hashmap_get(device->uuids, PA_BLUETOOTH_UUID_A2DP_SINK))
+ return false;
+ else if (!is_a2dp_sink && !pa_hashmap_get(device->uuids, PA_BLUETOOTH_UUID_A2DP_SOURCE))
+ return false;
+
+ if (is_a2dp_sink)
+ endpoints = pa_hashmap_get(device->a2dp_sink_endpoints, &a2dp_codec->codec_id);
+ else
+ endpoints = pa_hashmap_get(device->a2dp_source_endpoints, &a2dp_codec->codec_id);
+
+ if (!endpoints)
+ return false;
+
+ PA_HASHMAP_FOREACH(a2dp_codec_capabilities, endpoints, state) {
+ if (a2dp_codec->accept_capabilities(a2dp_codec_capabilities->buffer, a2dp_codec_capabilities->size, is_a2dp_sink))
+ return true;
+ }
+
+ return false;
}
static bool device_is_profile_connected(pa_bluetooth_device *device, pa_bluetooth_profile_t profile) {
@@ -197,9 +224,11 @@ static bool device_is_profile_connected(pa_bluetooth_device *device, pa_bluetoot
static unsigned device_count_disconnected_profiles(pa_bluetooth_device *device) {
pa_bluetooth_profile_t profile;
+ unsigned bluetooth_profile_count;
unsigned count = 0;
- for (profile = 0; profile < PA_BLUETOOTH_PROFILE_COUNT; profile++) {
+ bluetooth_profile_count = pa_bluetooth_profile_count();
+ for (profile = 0; profile < bluetooth_profile_count; profile++) {
if (!device_supports_profile(device, profile))
continue;
@@ -222,6 +251,7 @@ static void wait_for_profiles_cb(pa_mainloop_api *api, pa_time_event* event, con
pa_bluetooth_device *device = userdata;
pa_strbuf *buf;
pa_bluetooth_profile_t profile;
+ unsigned bluetooth_profile_count;
bool first = true;
char *profiles_str;
@@ -229,7 +259,8 @@ static void wait_for_profiles_cb(pa_mainloop_api *api, pa_time_event* event, con
buf = pa_strbuf_new();
- for (profile = 0; profile < PA_BLUETOOTH_PROFILE_COUNT; profile++) {
+ bluetooth_profile_count = pa_bluetooth_profile_count();
+ for (profile = 0; profile < bluetooth_profile_count; profile++) {
if (device_is_profile_connected(device, profile))
continue;
@@ -427,14 +458,15 @@ static void bluez5_transport_release_cb(pa_bluetooth_transport *t) {
}
bool pa_bluetooth_device_any_transport_connected(const pa_bluetooth_device *d) {
- unsigned i;
+ unsigned i, bluetooth_profile_count;
pa_assert(d);
if (!d->valid)
return false;
- for (i = 0; i < PA_BLUETOOTH_PROFILE_COUNT; i++)
+ bluetooth_profile_count = pa_bluetooth_profile_count();
+ for (i = 0; i < bluetooth_profile_count; i++)
if (d->transports[i] && d->transports[i]->state != PA_BLUETOOTH_TRANSPORT_STATE_DISCONNECTED)
return true;
@@ -508,6 +540,42 @@ static int parse_transport_properties(pa_bluetooth_transport *t, DBusMessageIter
return 0;
}
+static unsigned pa_a2dp_codec_id_hash_func(const void *_p) {
+ unsigned hash;
+ const pa_a2dp_codec_id *p = _p;
+
+ hash = p->codec_id;
+ hash = 31 * hash + ((p->vendor_id >> 0) & 0xFF);
+ hash = 31 * hash + ((p->vendor_id >> 8) & 0xFF);
+ hash = 31 * hash + ((p->vendor_id >> 16) & 0xFF);
+ hash = 31 * hash + ((p->vendor_id >> 24) & 0xFF);
+ hash = 31 * hash + ((p->vendor_codec_id >> 0) & 0xFF);
+ hash = 31 * hash + ((p->vendor_codec_id >> 8) & 0xFF);
+ return hash;
+}
+
+static int pa_a2dp_codec_id_compare_func(const void *_a, const void *_b) {
+ const pa_a2dp_codec_id *a = _a;
+ const pa_a2dp_codec_id *b = _b;
+
+ if (a->codec_id < b->codec_id)
+ return -1;
+ if (a->codec_id > b->codec_id)
+ return 1;
+
+ if (a->vendor_id < b->vendor_id)
+ return -1;
+ if (a->vendor_id > b->vendor_id)
+ return 1;
+
+ if (a->vendor_codec_id < b->vendor_codec_id)
+ return -1;
+ if (a->vendor_codec_id > b->vendor_codec_id)
+ return 1;
+
+ return 0;
+}
+
static pa_bluetooth_device* device_create(pa_bluetooth_discovery *y, const char *path) {
pa_bluetooth_device *d;
@@ -518,6 +586,11 @@ static pa_bluetooth_device* device_create(pa_bluetooth_discovery *y, const char
d->discovery = y;
d->path = pa_xstrdup(path);
d->uuids = pa_hashmap_new_full(pa_idxset_string_hash_func, pa_idxset_string_compare_func, NULL, pa_xfree);
+ d->a2dp_sink_endpoints = pa_hashmap_new_full(pa_a2dp_codec_id_hash_func, pa_a2dp_codec_id_compare_func, pa_xfree, (pa_free_cb_t)pa_hashmap_free);
+ d->a2dp_source_endpoints = pa_hashmap_new_full(pa_a2dp_codec_id_hash_func, pa_a2dp_codec_id_compare_func, pa_xfree, (pa_free_cb_t)pa_hashmap_free);
+ d->a2dp_sink_codecs = pa_hashmap_new(pa_idxset_string_hash_func, pa_idxset_string_compare_func);
+ d->a2dp_source_codecs = pa_hashmap_new(pa_idxset_string_hash_func, pa_idxset_string_compare_func);
+ d->transports = pa_xnew0(pa_bluetooth_transport *, pa_bluetooth_profile_count());
pa_hashmap_put(y->devices, d->path, d);
@@ -553,14 +626,53 @@ pa_bluetooth_device* pa_bluetooth_discovery_get_device_by_address(pa_bluetooth_d
return NULL;
}
+static char *remote_endpoint_path_to_device_path(const char *remote_endpoint_path) {
+ char *endptr;
+
+ endptr = strrchr(remote_endpoint_path, '/');
+ if (!endptr) {
+ pa_log_error("Invalid remote endpoint %s", remote_endpoint_path);
+ return NULL;
+ }
+
+ return pa_xstrndup(remote_endpoint_path, endptr-remote_endpoint_path);
+}
+
+static void remote_endpoint_remove(pa_bluetooth_discovery *y, const char *path) {
+ pa_bluetooth_device *device;
+ pa_hashmap *endpoints;
+ char *device_path;
+ void *state;
+
+ device_path = remote_endpoint_path_to_device_path(path);
+ if (!device_path)
+ return;
+
+ device = pa_hashmap_get(y->devices, device_path);
+ if (!device)
+ pa_log_warn("Remote endpoint %s for unknown device removed %s", path, device_path);
+
+ pa_xfree(device_path);
+
+ if (!device)
+ return;
+
+ PA_HASHMAP_FOREACH(endpoints, device->a2dp_sink_endpoints, state)
+ pa_hashmap_remove_and_free(endpoints, path);
+
+ PA_HASHMAP_FOREACH(endpoints, device->a2dp_source_endpoints, state)
+ pa_hashmap_remove_and_free(endpoints, path);
+}
+
static void device_free(pa_bluetooth_device *d) {
- unsigned i;
+ unsigned i, bluetooth_profile_count;
pa_assert(d);
device_stop_waiting_for_profiles(d);
- for (i = 0; i < PA_BLUETOOTH_PROFILE_COUNT; i++) {
+ bluetooth_profile_count = pa_bluetooth_profile_count();
+ for (i = 0; i < bluetooth_profile_count; i++) {
pa_bluetooth_transport *t;
if (!(t = d->transports[i]))
@@ -569,9 +681,11 @@ static void device_free(pa_bluetooth_device *d) {
pa_bluetooth_transport_free(t);
}
- if (d->uuids)
- pa_hashmap_free(d->uuids);
+ pa_hashmap_free(d->uuids);
+ pa_hashmap_free(d->a2dp_sink_endpoints);
+ pa_hashmap_free(d->a2dp_source_endpoints);
+ pa_xfree(d->transports);
pa_xfree(d->path);
pa_xfree(d->alias);
pa_xfree(d->address);
@@ -810,6 +924,125 @@ static void parse_device_properties(pa_bluetooth_device *d, DBusMessageIter *i)
}
}
+static void parse_remote_endpoint_properties(pa_bluetooth_device *d, const char *endpoint, DBusMessageIter *i) {
+ DBusMessageIter element_i;
+ pa_hashmap *codec_endpoints;
+ pa_hashmap *endpoints;
+ pa_a2dp_codec_id *a2dp_codec_id;
+ pa_a2dp_codec_capabilities *a2dp_codec_capabilities;
+ const char *uuid = NULL;
+ uint8_t codec_id = 0;
+ bool have_codec_id = false;
+ const uint8_t *capabilities = NULL;
+ int capabilities_size = 0;
+
+ dbus_message_iter_recurse(i, &element_i);
+
+ while (dbus_message_iter_get_arg_type(&element_i) == DBUS_TYPE_DICT_ENTRY) {
+ DBusMessageIter dict_i, variant_i;
+ const char *key;
+
+ dbus_message_iter_recurse(&element_i, &dict_i);
+
+ key = check_variant_property(&dict_i);
+ if (key == NULL) {
+ pa_log_error("Received invalid property for remote endpoint %s", endpoint);
+ return;
+ }
+
+ dbus_message_iter_recurse(&dict_i, &variant_i);
+
+ if (pa_streq(key, "UUID")) {
+ if (dbus_message_iter_get_arg_type(&variant_i) != DBUS_TYPE_STRING) {
+ pa_log_warn("Remote endpoint %s property 'UUID' is not string, ignoring", endpoint);
+ return;
+ }
+
+ dbus_message_iter_get_basic(&variant_i, &uuid);
+ } else if (pa_streq(key, "Codec")) {
+ if (dbus_message_iter_get_arg_type(&variant_i) != DBUS_TYPE_BYTE) {
+ pa_log_warn("Remote endpoint %s property 'Codec' is not byte, ignoring", endpoint);
+ return;
+ }
+
+ dbus_message_iter_get_basic(&variant_i, &codec_id);
+ have_codec_id = true;
+ } else if (pa_streq(key, "Capabilities")) {
+ DBusMessageIter array;
+
+ if (dbus_message_iter_get_arg_type(&variant_i) != DBUS_TYPE_ARRAY) {
+ pa_log_warn("Remote endpoint %s property 'Capabilities' is not array, ignoring", endpoint);
+ return;
+ }
+
+ dbus_message_iter_recurse(&variant_i, &array);
+ if (dbus_message_iter_get_arg_type(&array) != DBUS_TYPE_BYTE) {
+ pa_log_warn("Remote endpoint %s property 'Capabilities' is not array of bytes, ignoring", endpoint);
+ return;
+ }
+
+ dbus_message_iter_get_fixed_array(&array, &capabilities, &capabilities_size);
+ }
+
+ dbus_message_iter_next(&element_i);
+ }
+
+ if (!uuid) {
+ pa_log_warn("Remove endpoint %s does not have property 'UUID', ignoring", endpoint);
+ return;
+ }
+
+ if (!have_codec_id) {
+ pa_log_warn("Remove endpoint %s does not have property 'Codec', ignoring", endpoint);
+ return;
+ }
+
+ if (!capabilities || !capabilities_size) {
+ pa_log_warn("Remove endpoint %s does not have property 'Capabilities', ignoring", endpoint);
+ return;
+ }
+
+ if (pa_streq(uuid, PA_BLUETOOTH_UUID_A2DP_SINK)) {
+ codec_endpoints = d->a2dp_source_endpoints;
+ } else if (pa_streq(uuid, PA_BLUETOOTH_UUID_A2DP_SOURCE)) {
+ codec_endpoints = d->a2dp_sink_endpoints;
+ } else {
+ pa_log_warn("Remove endpoint %s does not have valid property 'UUID', ignoring", endpoint);
+ return;
+ }
+
+ if (capabilities_size < 0 || capabilities_size > 254) {
+ pa_log_warn("Remove endpoint %s does not have valid property 'Capabilities', ignoring", endpoint);
+ return;
+ }
+
+ a2dp_codec_id = pa_xmalloc0(sizeof(*a2dp_codec_id));
+ a2dp_codec_id->codec_id = codec_id;
+ if (codec_id == A2DP_CODEC_VENDOR) {
+ if ((size_t)capabilities_size < sizeof(a2dp_vendor_codec_t)) {
+ pa_log_warn("Remove endpoint %s does not have valid property 'Capabilities', ignoring", endpoint);
+ return;
+ }
+ a2dp_codec_id->vendor_id = A2DP_GET_VENDOR_ID(*(a2dp_vendor_codec_t *)capabilities);
+ a2dp_codec_id->vendor_codec_id = A2DP_GET_CODEC_ID(*(a2dp_vendor_codec_t *)capabilities);
+ } else {
+ a2dp_codec_id->vendor_id = 0;
+ a2dp_codec_id->vendor_codec_id = 0;
+ }
+
+ a2dp_codec_capabilities = pa_xmalloc0(sizeof(*a2dp_codec_capabilities) + capabilities_size);
+ a2dp_codec_capabilities->size = capabilities_size;
+ memcpy(a2dp_codec_capabilities->buffer, capabilities, capabilities_size);
+
+ endpoints = pa_hashmap_get(codec_endpoints, a2dp_codec_id);
+ if (!endpoints) {
+ endpoints = pa_hashmap_new_full(pa_idxset_string_hash_func, pa_idxset_string_compare_func, pa_xfree, pa_xfree);
+ pa_hashmap_put(codec_endpoints, a2dp_codec_id, endpoints);
+ }
+
+ pa_hashmap_put(endpoints, pa_xstrdup(endpoint), a2dp_codec_capabilities);
+}
+
static void parse_adapter_properties(pa_bluetooth_adapter *a, DBusMessageIter *i, bool is_property_change) {
DBusMessageIter element_i;
@@ -885,13 +1118,19 @@ finish:
pa_xfree(endpoint);
}
-static void register_endpoint(pa_bluetooth_discovery *y, const char *path, const char *endpoint, const char *uuid) {
+static void register_endpoint(pa_bluetooth_discovery *y, const pa_a2dp_codec *a2dp_codec, const char *path, const char *endpoint, const char *uuid) {
DBusMessage *m;
DBusMessageIter i, d;
- uint8_t codec = 0;
+ uint8_t capabilities[254];
+ size_t capabilities_size;
+ uint8_t codec_id;
pa_log_debug("Registering %s on adapter %s", endpoint, path);
+ codec_id = a2dp_codec->codec_id.codec_id;
+ capabilities_size = a2dp_codec->fill_capabilities(capabilities);
+ pa_assert(capabilities_size != 0);
+
pa_assert_se(m = dbus_message_new_method_call(BLUEZ_SERVICE, path, BLUEZ_MEDIA_INTERFACE, "RegisterEndpoint"));
dbus_message_iter_init_append(m, &i);
@@ -899,23 +1138,8 @@ static void register_endpoint(pa_bluetooth_discovery *y, const char *path, const
dbus_message_iter_open_container(&i, DBUS_TYPE_ARRAY, DBUS_DICT_ENTRY_BEGIN_CHAR_AS_STRING DBUS_TYPE_STRING_AS_STRING
DBUS_TYPE_VARIANT_AS_STRING DBUS_DICT_ENTRY_END_CHAR_AS_STRING, &d);
pa_dbus_append_basic_variant_dict_entry(&d, "UUID", DBUS_TYPE_STRING, &uuid);
- pa_dbus_append_basic_variant_dict_entry(&d, "Codec", DBUS_TYPE_BYTE, &codec);
-
- if (pa_streq(uuid, PA_BLUETOOTH_UUID_A2DP_SOURCE) || pa_streq(uuid, PA_BLUETOOTH_UUID_A2DP_SINK)) {
- a2dp_sbc_t capabilities;
-
- capabilities.channel_mode = SBC_CHANNEL_MODE_MONO | SBC_CHANNEL_MODE_DUAL_CHANNEL | SBC_CHANNEL_MODE_STEREO |
- SBC_CHANNEL_MODE_JOINT_STEREO;
- capabilities.frequency = SBC_SAMPLING_FREQ_16000 | SBC_SAMPLING_FREQ_32000 | SBC_SAMPLING_FREQ_44100 |
- SBC_SAMPLING_FREQ_48000;
- capabilities.allocation_method = SBC_ALLOCATION_SNR | SBC_ALLOCATION_LOUDNESS;
- capabilities.subbands = SBC_SUBBANDS_4 | SBC_SUBBANDS_8;
- capabilities.block_length = SBC_BLOCK_LENGTH_4 | SBC_BLOCK_LENGTH_8 | SBC_BLOCK_LENGTH_12 | SBC_BLOCK_LENGTH_16;
- capabilities.min_bitpool = SBC_MIN_BITPOOL;
- capabilities.max_bitpool = SBC_MAX_BITPOOL;
-
- pa_dbus_append_basic_array_variant_dict_entry(&d, "Capabilities", DBUS_TYPE_BYTE, &capabilities, sizeof(capabilities));
- }
+ pa_dbus_append_basic_variant_dict_entry(&d, "Codec", DBUS_TYPE_BYTE, &codec_id);
+ pa_dbus_append_basic_array_variant_dict_entry(&d, "Capabilities", DBUS_TYPE_BYTE, &capabilities, capabilities_size);
dbus_message_iter_close_container(&i, &d);
@@ -950,6 +1174,7 @@ static void parse_interfaces_and_properties(pa_bluetooth_discovery *y, DBusMessa
if (pa_streq(interface, BLUEZ_ADAPTER_INTERFACE)) {
pa_bluetooth_adapter *a;
+ unsigned a2dp_codec_i, a2dp_codec_count;
if ((a = pa_hashmap_get(y->adapters, path))) {
pa_log_error("Found duplicated D-Bus path for adapter %s", path);
@@ -964,8 +1189,21 @@ static void parse_interfaces_and_properties(pa_bluetooth_discovery *y, DBusMessa
if (!a->valid)
return;
- register_endpoint(y, path, A2DP_SOURCE_ENDPOINT, PA_BLUETOOTH_UUID_A2DP_SOURCE);
- register_endpoint(y, path, A2DP_SINK_ENDPOINT, PA_BLUETOOTH_UUID_A2DP_SINK);
+ /* Order is important. bluez prefers endpoints registered earlier.
+ * And codec with higher number has higher priority. So iterate in reverse order. */
+ a2dp_codec_count = pa_bluetooth_a2dp_codec_count();
+ for (a2dp_codec_i = a2dp_codec_count; a2dp_codec_i > 0; a2dp_codec_i--) {
+ const pa_a2dp_codec *a2dp_codec = pa_bluetooth_a2dp_codec_iter(a2dp_codec_i-1);
+ char *endpoint;
+
+ endpoint = pa_sprintf_malloc("%s/%s", A2DP_SINK_ENDPOINT, a2dp_codec->codec_name);
+ register_endpoint(y, a2dp_codec, path, endpoint, PA_BLUETOOTH_UUID_A2DP_SINK);
+ pa_xfree(endpoint);
+
+ endpoint = pa_sprintf_malloc("%s/%s", A2DP_SOURCE_ENDPOINT, a2dp_codec->codec_name);
+ register_endpoint(y, a2dp_codec, path, endpoint, PA_BLUETOOTH_UUID_A2DP_SOURCE);
+ pa_xfree(endpoint);
+ }
} else if (pa_streq(interface, BLUEZ_DEVICE_INTERFACE)) {
@@ -981,6 +1219,21 @@ static void parse_interfaces_and_properties(pa_bluetooth_discovery *y, DBusMessa
parse_device_properties(d, &iface_i);
+ } else if (pa_streq(interface, BLUEZ_MEDIA_ENDPOINT_INTERFACE)) {
+ char *device_path;
+
+ device_path = remote_endpoint_path_to_device_path(path);
+ if (!device_path)
+ return;
+ d = pa_hashmap_get(y->devices, device_path);
+ pa_xfree(device_path);
+ if (!d) {
+ pa_log_warn("Device for endpoint %s was not found", path);
+ return;
+ }
+
+ parse_remote_endpoint_properties(d, path, &iface_i);
+
} else
pa_log_debug("Unknown interface %s found, skipping", interface);
@@ -1186,6 +1439,8 @@ static DBusHandlerResult filter_cb(DBusConnection *bus, DBusMessage *m, void *us
if (pa_streq(iface, BLUEZ_DEVICE_INTERFACE))
device_remove(y, p);
+ else if (pa_streq(iface, BLUEZ_MEDIA_ENDPOINT_INTERFACE))
+ remote_endpoint_remove(y, p);
else if (pa_streq(iface, BLUEZ_ADAPTER_INTERFACE))
adapter_remove(y, p);
@@ -1237,6 +1492,23 @@ static DBusHandlerResult filter_cb(DBusConnection *bus, DBusMessage *m, void *us
return DBUS_HANDLER_RESULT_NOT_YET_HANDLED;
parse_device_properties(d, &arg_i);
+ } else if (pa_streq(iface, BLUEZ_MEDIA_ENDPOINT_INTERFACE)) {
+ pa_bluetooth_device *d;
+ char *device_path;
+
+ pa_log_info("Properties changed in remote endpoint %s", dbus_message_get_path(m));
+
+ device_path = remote_endpoint_path_to_device_path(dbus_message_get_path(m));
+ if (!device_path)
+ return DBUS_HANDLER_RESULT_NOT_YET_HANDLED;
+ d = pa_hashmap_get(y->devices, device_path);
+ pa_xfree(device_path);
+ if (!d) {
+ pa_log_warn("Properties changed in unknown device");
+ return DBUS_HANDLER_RESULT_NOT_YET_HANDLED;
+ }
+
+ parse_remote_endpoint_properties(d, dbus_message_get_path(m), &arg_i);
} else if (pa_streq(iface, BLUEZ_MEDIA_TRANSPORT_INTERFACE)) {
pa_bluetooth_transport *t;
@@ -1257,63 +1529,177 @@ fail:
return DBUS_HANDLER_RESULT_NOT_YET_HANDLED;
}
-static uint8_t a2dp_default_bitpool(uint8_t freq, uint8_t mode) {
- /* These bitpool values were chosen based on the A2DP spec recommendation */
- switch (freq) {
- case SBC_SAMPLING_FREQ_16000:
- case SBC_SAMPLING_FREQ_32000:
- return 53;
+static void change_a2dp_profile_reply(DBusPendingCall *pending, void *userdata) {
+ DBusMessage *r;
+ pa_dbus_pending *p;
+ pa_bluetooth_discovery *y;
+ char *pa_endpoint;
+
+ pa_assert(pending);
+ pa_assert_se(p = userdata);
+ pa_assert_se(y = p->context_data);
+ pa_assert_se(pa_endpoint = p->call_data);
+ pa_assert_se(r = dbus_pending_call_steal_reply(pending));
+
+ if (dbus_message_get_type(r) == DBUS_MESSAGE_TYPE_ERROR)
+ pa_log_error("Changing a2dp endpoint failed: %s: %s", dbus_message_get_error_name(r), pa_dbus_get_error_message(r));
+ else
+ pa_log_info("Changing a2dp endpoint successed");
+
+ dbus_message_unref(r);
+
+ PA_LLIST_REMOVE(pa_dbus_pending, y->pending, p);
+ pa_dbus_pending_free(p);
+ pa_xfree(pa_endpoint);
+}
+
+bool pa_bluetooth_device_change_a2dp_profile(pa_bluetooth_device *device, pa_bluetooth_profile_t profile) {
+ const pa_a2dp_codec *a2dp_codec;
+ bool is_a2dp_sink;
+ const char *endpoint;
+ char *pa_endpoint;
+ uint8_t config[254];
+ uint8_t config_size;
+ pa_hashmap *endpoints;
+ pa_a2dp_codec_capabilities *capabilities;
+ DBusMessage *m;
+ DBusMessageIter iter, dict;
+
+ a2dp_codec = pa_bluetooth_profile_to_a2dp_codec(profile);
+ is_a2dp_sink = pa_bluetooth_profile_is_a2dp_sink(profile);
- case SBC_SAMPLING_FREQ_44100:
+ endpoint = pa_hashmap_get(is_a2dp_sink ? device->a2dp_sink_codecs : device->a2dp_source_codecs, a2dp_codec->codec_name);
+ if (!endpoint) {
+ pa_log_error("Chaning a2dp profile for %s to %s failed: Remote endpoint does not support codec %s", device->path, pa_bluetooth_profile_to_string(profile), a2dp_codec->codec_name);
+ return false;
+ }
- switch (mode) {
- case SBC_CHANNEL_MODE_MONO:
- case SBC_CHANNEL_MODE_DUAL_CHANNEL:
- return 31;
+ pa_assert(endpoints = pa_hashmap_get(is_a2dp_sink ? device->a2dp_sink_endpoints : device->a2dp_source_endpoints, &a2dp_codec->codec_id));
+ pa_assert(capabilities = pa_hashmap_get(endpoints, endpoint));
- case SBC_CHANNEL_MODE_STEREO:
- case SBC_CHANNEL_MODE_JOINT_STEREO:
- return 53;
- }
+ config_size = a2dp_codec->fill_preferred_configuration(&device->discovery->core->default_sample_spec, capabilities->buffer, capabilities->size, config);
+ if (config_size == 0)
+ return false;
- pa_log_warn("Invalid channel mode %u", mode);
- return 53;
+ pa_endpoint = pa_sprintf_malloc("%s/%s", is_a2dp_sink ? A2DP_SOURCE_ENDPOINT : A2DP_SINK_ENDPOINT, a2dp_codec->codec_name);
- case SBC_SAMPLING_FREQ_48000:
+ pa_assert_se(m = dbus_message_new_method_call(BLUEZ_SERVICE, endpoint, BLUEZ_MEDIA_ENDPOINT_INTERFACE, "SetConfiguration"));
- switch (mode) {
- case SBC_CHANNEL_MODE_MONO:
- case SBC_CHANNEL_MODE_DUAL_CHANNEL:
- return 29;
+ dbus_message_iter_init_append(m, &iter);
+ pa_assert_se(dbus_message_iter_append_basic(&iter, DBUS_TYPE_OBJECT_PATH, &pa_endpoint));
+ dbus_message_iter_open_container(&iter, DBUS_TYPE_ARRAY, DBUS_DICT_ENTRY_BEGIN_CHAR_AS_STRING DBUS_TYPE_STRING_AS_STRING
+ DBUS_TYPE_VARIANT_AS_STRING DBUS_DICT_ENTRY_END_CHAR_AS_STRING, &dict);
+ pa_dbus_append_basic_array_variant_dict_entry(&dict, "Capabilities", DBUS_TYPE_BYTE, &config, config_size);
+ dbus_message_iter_close_container(&iter, &dict);
- case SBC_CHANNEL_MODE_STEREO:
- case SBC_CHANNEL_MODE_JOINT_STEREO:
- return 51;
- }
+ send_and_add_to_pending(device->discovery, m, change_a2dp_profile_reply, pa_endpoint);
+ return true;
+}
+
+unsigned pa_bluetooth_profile_count(void) {
+ return PA_BLUETOOTH_PROFILE_A2DP_START_INDEX + 2 * pa_bluetooth_a2dp_codec_count();
+}
+
+bool pa_bluetooth_profile_is_a2dp_source(pa_bluetooth_profile_t profile) {
+ unsigned source_start_index = PA_BLUETOOTH_PROFILE_A2DP_START_INDEX;
+ unsigned sink_start_index = PA_BLUETOOTH_PROFILE_A2DP_START_INDEX + pa_bluetooth_a2dp_codec_count();
+
+ pa_assert(profile < pa_bluetooth_profile_count());
+
+ return profile >= source_start_index && profile < sink_start_index;
+}
+
+bool pa_bluetooth_profile_is_a2dp_sink(pa_bluetooth_profile_t profile) {
+ unsigned sink_start_index = PA_BLUETOOTH_PROFILE_A2DP_START_INDEX + pa_bluetooth_a2dp_codec_count();
+
+ pa_assert(profile < pa_bluetooth_profile_count());
+
+ return profile >= sink_start_index;
+}
- pa_log_warn("Invalid channel mode %u", mode);
- return 51;
+const pa_a2dp_codec *pa_bluetooth_profile_to_a2dp_codec(pa_bluetooth_profile_t profile) {
+ unsigned source_start_index = PA_BLUETOOTH_PROFILE_A2DP_START_INDEX;
+ unsigned sink_start_index = PA_BLUETOOTH_PROFILE_A2DP_START_INDEX + pa_bluetooth_a2dp_codec_count();
+
+ pa_assert(profile >= source_start_index && profile < pa_bluetooth_profile_count());
+
+ if (profile < sink_start_index)
+ return pa_bluetooth_a2dp_codec_iter(profile - source_start_index);
+ else
+ return pa_bluetooth_a2dp_codec_iter(profile - sink_start_index);
+}
+
+pa_bluetooth_profile_t pa_bluetooth_profile_for_a2dp_codec(const char *codec_name, bool is_a2dp_sink) {
+ unsigned source_start_index = PA_BLUETOOTH_PROFILE_A2DP_START_INDEX;
+ unsigned sink_start_index = PA_BLUETOOTH_PROFILE_A2DP_START_INDEX + pa_bluetooth_a2dp_codec_count();
+ unsigned count = pa_bluetooth_a2dp_codec_count();
+ const pa_a2dp_codec *a2dp_codec;
+ unsigned i;
+
+ for (i = 0; i < count; i++) {
+ a2dp_codec = pa_bluetooth_a2dp_codec_iter(i);
+ if (pa_streq(a2dp_codec->codec_name, codec_name))
+ return i + (is_a2dp_sink ? sink_start_index : source_start_index);
}
- pa_log_warn("Invalid sampling freq %u", freq);
- return 53;
+ return PA_BLUETOOTH_PROFILE_OFF;
}
const char *pa_bluetooth_profile_to_string(pa_bluetooth_profile_t profile) {
+ static __thread char profile_string[128];
+ const pa_a2dp_codec *a2dp_codec;
+ bool is_a2dp_sink;
+
switch(profile) {
- case PA_BLUETOOTH_PROFILE_A2DP_SINK:
- return "a2dp_sink";
- case PA_BLUETOOTH_PROFILE_A2DP_SOURCE:
- return "a2dp_source";
case PA_BLUETOOTH_PROFILE_HEADSET_HEAD_UNIT:
return "headset_head_unit";
case PA_BLUETOOTH_PROFILE_HEADSET_AUDIO_GATEWAY:
return "headset_audio_gateway";
case PA_BLUETOOTH_PROFILE_OFF:
return "off";
+ default:
+ break;
}
- return NULL;
+ a2dp_codec = pa_bluetooth_profile_to_a2dp_codec(profile);
+ is_a2dp_sink = pa_bluetooth_profile_is_a2dp_sink(profile);
+
+ /* backward compatible profile names for SBC codec */
+ if (pa_streq(a2dp_codec->codec_name, "sbc"))
+ return is_a2dp_sink ? "a2dp_sink" : "a2dp_source";
+
+ pa_snprintf(profile_string, sizeof(profile_string), "a2dp_%s_%s", is_a2dp_sink ? "sink" : "source", a2dp_codec->codec_name);
+ return profile_string;
+}
+
+static pa_bluetooth_profile_t a2dp_endpoint_to_bluetooth_profile(const char *endpoint) {
+ const char *codec_name;
+ bool is_a2dp_sink;
+
+ if (pa_startswith(endpoint, A2DP_SINK_ENDPOINT "/")) {
+ codec_name = endpoint + strlen(A2DP_SINK_ENDPOINT "/");
+ is_a2dp_sink = false;
+ } else if (pa_startswith(endpoint, A2DP_SOURCE_ENDPOINT "/")) {
+ codec_name = endpoint + strlen(A2DP_SOURCE_ENDPOINT "/");
+ is_a2dp_sink = true;
+ } else {
+ return PA_BLUETOOTH_PROFILE_OFF;
+ }
+
+ return pa_bluetooth_profile_for_a2dp_codec(codec_name, is_a2dp_sink);
+}
+
+static const pa_a2dp_codec *a2dp_endpoint_to_a2dp_codec(const char *endpoint) {
+ const char *codec_name;
+
+ if (pa_startswith(endpoint, A2DP_SINK_ENDPOINT "/"))
+ codec_name = endpoint + strlen(A2DP_SINK_ENDPOINT "/");
+ else if (pa_startswith(endpoint, A2DP_SOURCE_ENDPOINT "/"))
+ codec_name = endpoint + strlen(A2DP_SOURCE_ENDPOINT "/");
+ else
+ return NULL;
+
+ return pa_bluetooth_a2dp_codec(codec_name);
}
static DBusMessage *endpoint_set_configuration(DBusConnection *conn, DBusMessage *m, void *userdata) {
@@ -1345,6 +1731,8 @@ static DBusMessage *endpoint_set_configuration(DBusConnection *conn, DBusMessage
if (dbus_message_iter_get_arg_type(&props) != DBUS_TYPE_DICT_ENTRY)
goto fail;
+ endpoint_path = dbus_message_get_path(m);
+
/* Read transport properties */
while (dbus_message_iter_get_arg_type(&props) == DBUS_TYPE_DICT_ENTRY) {
const char *key;
@@ -1367,16 +1755,9 @@ static DBusMessage *endpoint_set_configuration(DBusConnection *conn, DBusMessage
dbus_message_iter_get_basic(&value, &uuid);
- endpoint_path = dbus_message_get_path(m);
- if (pa_streq(endpoint_path, A2DP_SOURCE_ENDPOINT)) {
- if (pa_streq(uuid, PA_BLUETOOTH_UUID_A2DP_SOURCE))
- p = PA_BLUETOOTH_PROFILE_A2DP_SINK;
- } else if (pa_streq(endpoint_path, A2DP_SINK_ENDPOINT)) {
- if (pa_streq(uuid, PA_BLUETOOTH_UUID_A2DP_SINK))
- p = PA_BLUETOOTH_PROFILE_A2DP_SOURCE;
- }
-
- if (p == PA_BLUETOOTH_PROFILE_OFF) {
+ p = a2dp_endpoint_to_bluetooth_profile(endpoint_path);
+ if ((pa_streq(uuid, PA_BLUETOOTH_UUID_A2DP_SOURCE) && !pa_bluetooth_profile_is_a2dp_sink(p)) ||
+ (pa_streq(uuid, PA_BLUETOOTH_UUID_A2DP_SINK) && !pa_bluetooth_profile_is_a2dp_source(p))) {
pa_log_error("UUID %s of transport %s incompatible with endpoint %s", uuid, path, endpoint_path);
goto fail;
}
@@ -1389,7 +1770,7 @@ static DBusMessage *endpoint_set_configuration(DBusConnection *conn, DBusMessage
dbus_message_iter_get_basic(&value, &dev_path);
} else if (pa_streq(key, "Configuration")) {
DBusMessageIter array;
- a2dp_sbc_t *c;
+ const pa_a2dp_codec *a2dp_codec;
if (var != DBUS_TYPE_ARRAY) {
pa_log_error("Property %s of wrong type %c", key, (char)var);
@@ -1404,40 +1785,12 @@ static DBusMessage *endpoint_set_configuration(DBusConnection *conn, DBusMessage
}
dbus_message_iter_get_fixed_array(&array, &config, &size);
- if (size != sizeof(a2dp_sbc_t)) {
- pa_log_error("Configuration array of invalid size");
- goto fail;
- }
-
- c = (a2dp_sbc_t *) config;
-
- if (c->frequency != SBC_SAMPLING_FREQ_16000 && c->frequency != SBC_SAMPLING_FREQ_32000 &&
- c->frequency != SBC_SAMPLING_FREQ_44100 && c->frequency != SBC_SAMPLING_FREQ_48000) {
- pa_log_error("Invalid sampling frequency in configuration");
- goto fail;
- }
- if (c->channel_mode != SBC_CHANNEL_MODE_MONO && c->channel_mode != SBC_CHANNEL_MODE_DUAL_CHANNEL &&
- c->channel_mode != SBC_CHANNEL_MODE_STEREO && c->channel_mode != SBC_CHANNEL_MODE_JOINT_STEREO) {
- pa_log_error("Invalid channel mode in configuration");
- goto fail;
- }
-
- if (c->allocation_method != SBC_ALLOCATION_SNR && c->allocation_method != SBC_ALLOCATION_LOUDNESS) {
- pa_log_error("Invalid allocation method in configuration");
- goto fail;
- }
-
- if (c->subbands != SBC_SUBBANDS_4 && c->subbands != SBC_SUBBANDS_8) {
- pa_log_error("Invalid SBC subbands in configuration");
- goto fail;
- }
+ a2dp_codec = a2dp_endpoint_to_a2dp_codec(endpoint_path);
+ pa_assert(a2dp_codec);
- if (c->block_length != SBC_BLOCK_LENGTH_4 && c->block_length != SBC_BLOCK_LENGTH_8 &&
- c->block_length != SBC_BLOCK_LENGTH_12 && c->block_length != SBC_BLOCK_LENGTH_16) {
- pa_log_error("Invalid block length in configuration");
+ if (!a2dp_codec->validate_configuration(config, size))
goto fail;
- }
}
dbus_message_iter_next(&props);
@@ -1484,21 +1837,17 @@ fail2:
static DBusMessage *endpoint_select_configuration(DBusConnection *conn, DBusMessage *m, void *userdata) {
pa_bluetooth_discovery *y = userdata;
- a2dp_sbc_t *cap, config;
- uint8_t *pconf = (uint8_t *) &config;
- int i, size;
+ const char *endpoint_path;
+ uint8_t *cap;
+ int size;
+ const pa_a2dp_codec *a2dp_codec;
+ uint8_t config[254];
+ uint8_t *config_ptr = config;
+ size_t config_size;
DBusMessage *r;
DBusError err;
- static const struct {
- uint32_t rate;
- uint8_t cap;
- } freq_table[] = {
- { 16000U, SBC_SAMPLING_FREQ_16000 },
- { 32000U, SBC_SAMPLING_FREQ_32000 },
- { 44100U, SBC_SAMPLING_FREQ_44100 },
- { 48000U, SBC_SAMPLING_FREQ_48000 }
- };
+ endpoint_path = dbus_message_get_path(m);
dbus_error_init(&err);
@@ -1508,101 +1857,15 @@ static DBusMessage *endpoint_select_configuration(DBusConnection *conn, DBusMess
goto fail;
}
- if (size != sizeof(config)) {
- pa_log_error("Capabilities array has invalid size");
- goto fail;
- }
-
- pa_zero(config);
-
- /* Find the lowest freq that is at least as high as the requested sampling rate */
- for (i = 0; (unsigned) i < PA_ELEMENTSOF(freq_table); i++)
- if (freq_table[i].rate >= y->core->default_sample_spec.rate && (cap->frequency & freq_table[i].cap)) {
- config.frequency = freq_table[i].cap;
- break;
- }
-
- if ((unsigned) i == PA_ELEMENTSOF(freq_table)) {
- for (--i; i >= 0; i--) {
- if (cap->frequency & freq_table[i].cap) {
- config.frequency = freq_table[i].cap;
- break;
- }
- }
-
- if (i < 0) {
- pa_log_error("Not suitable sample rate");
- goto fail;
- }
- }
-
- pa_assert((unsigned) i < PA_ELEMENTSOF(freq_table));
+ a2dp_codec = a2dp_endpoint_to_a2dp_codec(endpoint_path);
+ pa_assert(a2dp_codec);
- if (y->core->default_sample_spec.channels <= 1) {
- if (cap->channel_mode & SBC_CHANNEL_MODE_MONO)
- config.channel_mode = SBC_CHANNEL_MODE_MONO;
- else if (cap->channel_mode & SBC_CHANNEL_MODE_JOINT_STEREO)
- config.channel_mode = SBC_CHANNEL_MODE_JOINT_STEREO;
- else if (cap->channel_mode & SBC_CHANNEL_MODE_STEREO)
- config.channel_mode = SBC_CHANNEL_MODE_STEREO;
- else if (cap->channel_mode & SBC_CHANNEL_MODE_DUAL_CHANNEL)
- config.channel_mode = SBC_CHANNEL_MODE_DUAL_CHANNEL;
- else {
- pa_log_error("No supported channel modes");
- goto fail;
- }
- }
-
- if (y->core->default_sample_spec.channels >= 2) {
- if (cap->channel_mode & SBC_CHANNEL_MODE_JOINT_STEREO)
- config.channel_mode = SBC_CHANNEL_MODE_JOINT_STEREO;
- else if (cap->channel_mode & SBC_CHANNEL_MODE_STEREO)
- config.channel_mode = SBC_CHANNEL_MODE_STEREO;
- else if (cap->channel_mode & SBC_CHANNEL_MODE_DUAL_CHANNEL)
- config.channel_mode = SBC_CHANNEL_MODE_DUAL_CHANNEL;
- else if (cap->channel_mode & SBC_CHANNEL_MODE_MONO)
- config.channel_mode = SBC_CHANNEL_MODE_MONO;
- else {
- pa_log_error("No supported channel modes");
- goto fail;
- }
- }
-
- if (cap->block_length & SBC_BLOCK_LENGTH_16)
- config.block_length = SBC_BLOCK_LENGTH_16;
- else if (cap->block_length & SBC_BLOCK_LENGTH_12)
- config.block_length = SBC_BLOCK_LENGTH_12;
- else if (cap->block_length & SBC_BLOCK_LENGTH_8)
- config.block_length = SBC_BLOCK_LENGTH_8;
- else if (cap->block_length & SBC_BLOCK_LENGTH_4)
- config.block_length = SBC_BLOCK_LENGTH_4;
- else {
- pa_log_error("No supported block lengths");
- goto fail;
- }
-
- if (cap->subbands & SBC_SUBBANDS_8)
- config.subbands = SBC_SUBBANDS_8;
- else if (cap->subbands & SBC_SUBBANDS_4)
- config.subbands = SBC_SUBBANDS_4;
- else {
- pa_log_error("No supported subbands");
- goto fail;
- }
-
- if (cap->allocation_method & SBC_ALLOCATION_LOUDNESS)
- config.allocation_method = SBC_ALLOCATION_LOUDNESS;
- else if (cap->allocation_method & SBC_ALLOCATION_SNR)
- config.allocation_method = SBC_ALLOCATION_SNR;
-
- config.min_bitpool = (uint8_t) PA_MAX(SBC_MIN_BITPOOL, cap->min_bitpool);
- config.max_bitpool = (uint8_t) PA_MIN(a2dp_default_bitpool(config.frequency, config.channel_mode), cap->max_bitpool);
-
- if (config.min_bitpool > config.max_bitpool)
+ config_size = a2dp_codec->fill_preferred_configuration(&y->core->default_sample_spec, cap, size, config);
+ if (config_size == 0)
goto fail;
pa_assert_se(r = dbus_message_new_method_return(m));
- pa_assert_se(dbus_message_append_args(r, DBUS_TYPE_ARRAY, DBUS_TYPE_BYTE, &pconf, size, DBUS_TYPE_INVALID));
+ pa_assert_se(dbus_message_append_args(r, DBUS_TYPE_ARRAY, DBUS_TYPE_BYTE, &config_ptr, config_size, DBUS_TYPE_INVALID));
return r;
@@ -1677,7 +1940,7 @@ static DBusHandlerResult endpoint_handler(DBusConnection *c, DBusMessage *m, voi
pa_log_debug("dbus: path=%s, interface=%s, member=%s", path, interface, member);
- if (!pa_streq(path, A2DP_SOURCE_ENDPOINT) && !pa_streq(path, A2DP_SINK_ENDPOINT))
+ if (!a2dp_endpoint_to_a2dp_codec(path))
return DBUS_HANDLER_RESULT_NOT_YET_HANDLED;
if (dbus_message_is_method_call(m, "org.freedesktop.DBus.Introspectable", "Introspect")) {
@@ -1705,49 +1968,32 @@ static DBusHandlerResult endpoint_handler(DBusConnection *c, DBusMessage *m, voi
return DBUS_HANDLER_RESULT_HANDLED;
}
-static void endpoint_init(pa_bluetooth_discovery *y, pa_bluetooth_profile_t profile) {
+static void endpoint_init(pa_bluetooth_discovery *y, const char *endpoint) {
static const DBusObjectPathVTable vtable_endpoint = {
.message_function = endpoint_handler,
};
pa_assert(y);
+ pa_assert(endpoint);
- switch(profile) {
- case PA_BLUETOOTH_PROFILE_A2DP_SINK:
- pa_assert_se(dbus_connection_register_object_path(pa_dbus_connection_get(y->connection), A2DP_SOURCE_ENDPOINT,
- &vtable_endpoint, y));
- break;
- case PA_BLUETOOTH_PROFILE_A2DP_SOURCE:
- pa_assert_se(dbus_connection_register_object_path(pa_dbus_connection_get(y->connection), A2DP_SINK_ENDPOINT,
- &vtable_endpoint, y));
- break;
- default:
- pa_assert_not_reached();
- break;
- }
+ pa_assert_se(dbus_connection_register_object_path(pa_dbus_connection_get(y->connection), endpoint,
+ &vtable_endpoint, y));
}
-static void endpoint_done(pa_bluetooth_discovery *y, pa_bluetooth_profile_t profile) {
+static void endpoint_done(pa_bluetooth_discovery *y, const char *endpoint) {
pa_assert(y);
+ pa_assert(endpoint);
- switch(profile) {
- case PA_BLUETOOTH_PROFILE_A2DP_SINK:
- dbus_connection_unregister_object_path(pa_dbus_connection_get(y->connection), A2DP_SOURCE_ENDPOINT);
- break;
- case PA_BLUETOOTH_PROFILE_A2DP_SOURCE:
- dbus_connection_unregister_object_path(pa_dbus_connection_get(y->connection), A2DP_SINK_ENDPOINT);
- break;
- default:
- pa_assert_not_reached();
- break;
- }
+ dbus_connection_unregister_object_path(pa_dbus_connection_get(y->connection), endpoint);
}
pa_bluetooth_discovery* pa_bluetooth_discovery_get(pa_core *c, int headset_backend) {
pa_bluetooth_discovery *y;
DBusError err;
DBusConnection *conn;
- unsigned i;
+ unsigned i, count;
+ const pa_a2dp_codec *a2dp_codec;
+ char *endpoint;
y = pa_xnew0(pa_bluetooth_discovery, 1);
PA_REFCNT_INIT(y);
@@ -1792,6 +2038,8 @@ pa_bluetooth_discovery* pa_bluetooth_discovery_get(pa_core *c, int headset_backe
"type='signal',sender='" BLUEZ_SERVICE "',interface='org.freedesktop.DBus.Properties',member='PropertiesChanged'"
",arg0='" BLUEZ_DEVICE_INTERFACE "'",
"type='signal',sender='" BLUEZ_SERVICE "',interface='org.freedesktop.DBus.Properties',member='PropertiesChanged'"
+ ",arg0='" BLUEZ_MEDIA_ENDPOINT_INTERFACE "'",
+ "type='signal',sender='" BLUEZ_SERVICE "',interface='org.freedesktop.DBus.Properties',member='PropertiesChanged'"
",arg0='" BLUEZ_MEDIA_TRANSPORT_INTERFACE "'",
NULL) < 0) {
pa_log_error("Failed to add D-Bus matches: %s", err.message);
@@ -1799,8 +2047,18 @@ pa_bluetooth_discovery* pa_bluetooth_discovery_get(pa_core *c, int headset_backe
}
y->matches_added = true;
- endpoint_init(y, PA_BLUETOOTH_PROFILE_A2DP_SINK);
- endpoint_init(y, PA_BLUETOOTH_PROFILE_A2DP_SOURCE);
+ count = pa_bluetooth_a2dp_codec_count();
+ for (i = 0; i < count; i++) {
+ a2dp_codec = pa_bluetooth_a2dp_codec_iter(i);
+
+ endpoint = pa_sprintf_malloc("%s/%s", A2DP_SINK_ENDPOINT, a2dp_codec->codec_name);
+ endpoint_init(y, endpoint);
+ pa_xfree(endpoint);
+
+ endpoint = pa_sprintf_malloc("%s/%s", A2DP_SOURCE_ENDPOINT, a2dp_codec->codec_name);
+ endpoint_init(y, endpoint);
+ pa_xfree(endpoint);
+ }
get_managed_objects(y);
@@ -1823,6 +2081,10 @@ pa_bluetooth_discovery* pa_bluetooth_discovery_ref(pa_bluetooth_discovery *y) {
}
void pa_bluetooth_discovery_unref(pa_bluetooth_discovery *y) {
+ unsigned i, count;
+ const pa_a2dp_codec *a2dp_codec;
+ char *endpoint;
+
pa_assert(y);
pa_assert(PA_REFCNT_VALUE(y) > 0);
@@ -1862,14 +2124,26 @@ void pa_bluetooth_discovery_unref(pa_bluetooth_discovery *y) {
"type='signal',sender='" BLUEZ_SERVICE "',interface='org.freedesktop.DBus.Properties',"
"member='PropertiesChanged',arg0='" BLUEZ_DEVICE_INTERFACE "'",
"type='signal',sender='" BLUEZ_SERVICE "',interface='org.freedesktop.DBus.Properties',"
+ "member='PropertiesChanged',arg0='" BLUEZ_MEDIA_ENDPOINT_INTERFACE "'",
+ "type='signal',sender='" BLUEZ_SERVICE "',interface='org.freedesktop.DBus.Properties',"
"member='PropertiesChanged',arg0='" BLUEZ_MEDIA_TRANSPORT_INTERFACE "'",
NULL);
if (y->filter_added)
dbus_connection_remove_filter(pa_dbus_connection_get(y->connection), filter_cb, y);
- endpoint_done(y, PA_BLUETOOTH_PROFILE_A2DP_SINK);
- endpoint_done(y, PA_BLUETOOTH_PROFILE_A2DP_SOURCE);
+ count = pa_bluetooth_a2dp_codec_count();
+ for (i = 0; i < count; i++) {
+ a2dp_codec = pa_bluetooth_a2dp_codec_iter(i);
+
+ endpoint = pa_sprintf_malloc("%s/%s", A2DP_SINK_ENDPOINT, a2dp_codec->codec_name);
+ endpoint_done(y, endpoint);
+ pa_xfree(endpoint);
+
+ endpoint = pa_sprintf_malloc("%s/%s", A2DP_SOURCE_ENDPOINT, a2dp_codec->codec_name);
+ endpoint_done(y, endpoint);
+ pa_xfree(endpoint);
+ }
pa_dbus_connection_unref(y->connection);
}
diff --git a/src/modules/bluetooth/bluez5-util.h b/src/modules/bluetooth/bluez5-util.h
index ad30708f0..3152028f9 100644
--- a/src/modules/bluetooth/bluez5-util.h
+++ b/src/modules/bluetooth/bluez5-util.h
@@ -5,6 +5,7 @@
This file is part of PulseAudio.
Copyright 2008-2013 João Paulo Rechi Vita
+ Copyrigth 2018-2019 Pali Rohár <pali.rohar at gmail.com>
PulseAudio is free software; you can redistribute it and/or modify
it under the terms of the GNU Lesser General Public License as
@@ -22,6 +23,8 @@
#include <pulsecore/core.h>
+#include "a2dp-codec-util.h"
+
#define PA_BLUETOOTH_UUID_A2DP_SOURCE "0000110a-0000-1000-8000-00805f9b34fb"
#define PA_BLUETOOTH_UUID_A2DP_SINK "0000110b-0000-1000-8000-00805f9b34fb"
@@ -50,14 +53,14 @@ typedef enum pa_bluetooth_hook {
PA_BLUETOOTH_HOOK_MAX
} pa_bluetooth_hook_t;
-typedef enum profile {
- PA_BLUETOOTH_PROFILE_A2DP_SINK,
- PA_BLUETOOTH_PROFILE_A2DP_SOURCE,
- PA_BLUETOOTH_PROFILE_HEADSET_HEAD_UNIT,
- PA_BLUETOOTH_PROFILE_HEADSET_AUDIO_GATEWAY,
- PA_BLUETOOTH_PROFILE_OFF
-} pa_bluetooth_profile_t;
-#define PA_BLUETOOTH_PROFILE_COUNT PA_BLUETOOTH_PROFILE_OFF
+/* Profile index is used also for card profile priority. Higher number has higher priority.
+ * All A2DP profiles have higher priority as all non-A2DP profiles.
+ * And all A2DP sink profiles have higher priority as all A2DP source profiles. */
+#define PA_BLUETOOTH_PROFILE_OFF 0
+#define PA_BLUETOOTH_PROFILE_HEADSET_AUDIO_GATEWAY 1
+#define PA_BLUETOOTH_PROFILE_HEADSET_HEAD_UNIT 2
+#define PA_BLUETOOTH_PROFILE_A2DP_START_INDEX 3
+typedef unsigned pa_bluetooth_profile_t;
typedef enum pa_bluetooth_transport_state {
PA_BLUETOOTH_TRANSPORT_STATE_DISCONNECTED,
@@ -111,8 +114,12 @@ struct pa_bluetooth_device {
char *address;
uint32_t class_of_device;
pa_hashmap *uuids; /* char* -> char* (hashmap-as-a-set) */
+ pa_hashmap *a2dp_sink_endpoints; /* pa_a2dp_codec_id* -> pa_hashmap ( char* (remote endpoint) -> pa_a2dp_codec_capabilities* ) */
+ pa_hashmap *a2dp_source_endpoints; /* pa_a2dp_codec_id* -> pa_hashmap ( char* (remote endpoint) -> pa_a2dp_codec_capabilities* ) */
+ pa_hashmap *a2dp_sink_codecs; /* char* (codec) -> char* (remote endpoint) */
+ pa_hashmap *a2dp_source_codecs; /* char* (codec) -> char* (remote endpoint) */
- pa_bluetooth_transport *transports[PA_BLUETOOTH_PROFILE_COUNT];
+ pa_bluetooth_transport **transports;
pa_time_event *wait_for_profiles_timer;
};
@@ -155,6 +162,8 @@ void pa_bluetooth_transport_put(pa_bluetooth_transport *t);
void pa_bluetooth_transport_unlink(pa_bluetooth_transport *t);
void pa_bluetooth_transport_free(pa_bluetooth_transport *t);
+bool pa_bluetooth_device_change_a2dp_profile(pa_bluetooth_device *d, pa_bluetooth_profile_t profile);
+
bool pa_bluetooth_device_any_transport_connected(const pa_bluetooth_device *d);
pa_bluetooth_device* pa_bluetooth_discovery_get_device_by_path(pa_bluetooth_discovery *y, const char *path);
@@ -162,8 +171,21 @@ pa_bluetooth_device* pa_bluetooth_discovery_get_device_by_address(pa_bluetooth_d
pa_hook* pa_bluetooth_discovery_hook(pa_bluetooth_discovery *y, pa_bluetooth_hook_t hook);
+unsigned pa_bluetooth_profile_count(void);
+bool pa_bluetooth_profile_is_a2dp_sink(pa_bluetooth_profile_t profile);
+bool pa_bluetooth_profile_is_a2dp_source(pa_bluetooth_profile_t profile);
+const pa_a2dp_codec *pa_bluetooth_profile_to_a2dp_codec(pa_bluetooth_profile_t profile);
+pa_bluetooth_profile_t pa_bluetooth_profile_for_a2dp_codec(const char *codec_name, bool is_a2dp_sink);
const char *pa_bluetooth_profile_to_string(pa_bluetooth_profile_t profile);
+static inline bool pa_bluetooth_profile_is_a2dp(pa_bluetooth_profile_t profile) {
+ return pa_bluetooth_profile_is_a2dp_sink(profile) || pa_bluetooth_profile_is_a2dp_source(profile);
+}
+
+static inline bool pa_bluetooth_profile_support_a2dp_backchannel(pa_bluetooth_profile_t profile) {
+ return pa_bluetooth_profile_to_a2dp_codec(profile)->support_backchannel;
+}
+
static inline bool pa_bluetooth_uuid_is_hsp_hs(const char *uuid) {
return pa_streq(uuid, PA_BLUETOOTH_UUID_HSP_HS) || pa_streq(uuid, PA_BLUETOOTH_UUID_HSP_HS_ALT);
}
diff --git a/src/modules/bluetooth/module-bluez5-device.c b/src/modules/bluetooth/module-bluez5-device.c
index 3e72ac3c1..9e7b20fdc 100644
--- a/src/modules/bluetooth/module-bluez5-device.c
+++ b/src/modules/bluetooth/module-bluez5-device.c
@@ -3,6 +3,7 @@
Copyright 2008-2013 João Paulo Rechi Vita
Copyright 2011-2013 BMW Car IT GmbH.
+ Copyright 2018-2019 Pali Rohár <pali.rohar at gmail.com>
PulseAudio is free software; you can redistribute it and/or modify
it under the terms of the GNU Lesser General Public License as
@@ -25,7 +26,6 @@
#include <errno.h>
#include <arpa/inet.h>
-#include <sbc/sbc.h>
#include <pulse/rtclock.h>
#include <pulse/timeval.h>
@@ -47,8 +47,8 @@
#include <pulsecore/time-smoother.h>
#include "a2dp-codecs.h"
+#include "a2dp-codec-util.h"
#include "bluez5-util.h"
-#include "rtp.h"
PA_MODULE_AUTHOR("João Paulo Rechi Vita");
PA_MODULE_DESCRIPTION("BlueZ 5 Bluetooth audio sink and source");
@@ -62,8 +62,6 @@ PA_MODULE_USAGE("path=<device object path>"
#define FIXED_LATENCY_RECORD_A2DP (25 * PA_USEC_PER_MSEC)
#define FIXED_LATENCY_RECORD_SCO (25 * PA_USEC_PER_MSEC)
-#define BITPOOL_DEC_LIMIT 32
-#define BITPOOL_DEC_STEP 5
#define HSP_MAX_GAIN 15
static const char* const valid_modargs[] = {
@@ -94,18 +92,6 @@ typedef struct bluetooth_msg {
PA_DEFINE_PRIVATE_CLASS(bluetooth_msg, pa_msgobject);
#define BLUETOOTH_MSG(o) (bluetooth_msg_cast(o))
-typedef struct sbc_info {
- sbc_t sbc; /* Codec data */
- bool sbc_initialized; /* Keep track if the encoder is initialized */
- size_t codesize, frame_length; /* SBC Codesize, frame_length. We simply cache those values here */
- uint16_t seq_num; /* Cumulative packet sequence */
- uint8_t min_bitpool;
- uint8_t max_bitpool;
-
- void* buffer; /* Codec transfer buffer */
- size_t buffer_size; /* Size of the buffer */
-} sbc_info_t;
-
struct userdata {
pa_module *module;
pa_core *core;
@@ -145,8 +131,19 @@ struct userdata {
pa_usec_t started_at;
pa_smoother *read_smoother;
pa_memchunk write_memchunk;
- pa_sample_spec sample_spec;
- struct sbc_info sbc_info;
+ bool support_a2dp_codec_switch;
+
+ void *encoder_info;
+ void *encoder_backchannel_info;
+ pa_sample_spec encoder_sample_spec;
+ void *encoder_buffer; /* Codec transfer buffer */
+ size_t encoder_buffer_size; /* Size of the buffer */
+
+ void *decoder_info;
+ void *decoder_backchannel_info;
+ pa_sample_spec decoder_sample_spec;
+ void *decoder_buffer; /* Codec transfer buffer */
+ size_t decoder_buffer_size; /* Size of the buffer */
};
typedef enum pa_bluetooth_form_factor {
@@ -380,7 +377,7 @@ static int sco_process_push(struct userdata *u) {
* issues in our Bluetooth adapter. In these cases, in order to avoid
* an assertion failure due to unaligned data, just discard the whole
* packet */
- if (!pa_frame_aligned(l, &u->sample_spec)) {
+ if (!pa_frame_aligned(l, &u->decoder_sample_spec)) {
pa_log_warn("SCO packet received of unaligned size: %zu", l);
pa_memblock_unref(memchunk.memblock);
return -1;
@@ -403,7 +400,7 @@ static int sco_process_push(struct userdata *u) {
tstamp = pa_rtclock_now();
}
- pa_smoother_put(u->read_smoother, tstamp, pa_bytes_to_usec(u->read_index, &u->sample_spec));
+ pa_smoother_put(u->read_smoother, tstamp, pa_bytes_to_usec(u->read_index, &u->decoder_sample_spec));
pa_smoother_resume(u->read_smoother, tstamp, true);
pa_source_post(u->source, &memchunk);
@@ -413,115 +410,41 @@ static int sco_process_push(struct userdata *u) {
}
/* Run from IO thread */
-static void a2dp_prepare_buffer(struct userdata *u) {
+static void a2dp_prepare_encoder_buffer(struct userdata *u) {
size_t min_buffer_size = PA_MAX(u->read_link_mtu, u->write_link_mtu);
pa_assert(u);
- if (u->sbc_info.buffer_size >= min_buffer_size)
+ if (u->encoder_buffer_size >= min_buffer_size)
return;
- u->sbc_info.buffer_size = 2 * min_buffer_size;
- pa_xfree(u->sbc_info.buffer);
- u->sbc_info.buffer = pa_xmalloc(u->sbc_info.buffer_size);
+ u->encoder_buffer_size = 2 * min_buffer_size;
+ pa_xfree(u->encoder_buffer);
+ u->encoder_buffer = pa_xmalloc(u->encoder_buffer_size);
}
/* Run from IO thread */
-static int a2dp_process_render(struct userdata *u) {
- struct sbc_info *sbc_info;
- struct rtp_header *header;
- struct rtp_payload *payload;
- size_t nbytes;
- void *d;
- const void *p;
- size_t to_write, to_encode;
- unsigned frame_count;
- int ret = 0;
+static void a2dp_prepare_decoder_buffer(struct userdata *u) {
+ size_t min_buffer_size = PA_MAX(u->read_link_mtu, u->write_link_mtu);
pa_assert(u);
- pa_assert(u->profile == PA_BLUETOOTH_PROFILE_A2DP_SINK);
- pa_assert(u->sink);
-
- /* First, render some data */
- if (!u->write_memchunk.memblock)
- pa_sink_render_full(u->sink, u->write_block_size, &u->write_memchunk);
-
- pa_assert(u->write_memchunk.length == u->write_block_size);
-
- a2dp_prepare_buffer(u);
-
- sbc_info = &u->sbc_info;
- header = sbc_info->buffer;
- payload = (struct rtp_payload*) ((uint8_t*) sbc_info->buffer + sizeof(*header));
-
- frame_count = 0;
-
- /* Try to create a packet of the full MTU */
-
- p = (const uint8_t *) pa_memblock_acquire_chunk(&u->write_memchunk);
- to_encode = u->write_memchunk.length;
-
- d = (uint8_t*) sbc_info->buffer + sizeof(*header) + sizeof(*payload);
- to_write = sbc_info->buffer_size - sizeof(*header) - sizeof(*payload);
-
- while (PA_LIKELY(to_encode > 0 && to_write > 0)) {
- ssize_t written;
- ssize_t encoded;
-
- encoded = sbc_encode(&sbc_info->sbc,
- p, to_encode,
- d, to_write,
- &written);
-
- if (PA_UNLIKELY(encoded <= 0)) {
- pa_log_error("SBC encoding error (%li)", (long) encoded);
- pa_memblock_release(u->write_memchunk.memblock);
- return -1;
- }
-
- pa_assert_fp((size_t) encoded <= to_encode);
- pa_assert_fp((size_t) encoded == sbc_info->codesize);
-
- pa_assert_fp((size_t) written <= to_write);
- pa_assert_fp((size_t) written == sbc_info->frame_length);
-
- p = (const uint8_t*) p + encoded;
- to_encode -= encoded;
-
- d = (uint8_t*) d + written;
- to_write -= written;
-
- frame_count++;
- }
-
- pa_memblock_release(u->write_memchunk.memblock);
-
- pa_assert(to_encode == 0);
-
- PA_ONCE_BEGIN {
- pa_log_debug("Using SBC encoder implementation: %s", pa_strnull(sbc_get_implementation_info(&sbc_info->sbc)));
- } PA_ONCE_END;
-
- /* write it to the fifo */
- memset(sbc_info->buffer, 0, sizeof(*header) + sizeof(*payload));
- header->v = 2;
- /* A2DP spec: "A payload type in the RTP dynamic range shall be chosen".
- * RFC3551 defines the dynamic range to span from 96 to 127, and 96 appears
- * to be the most common choice in A2DP implementations. */
- header->pt = 96;
+ if (u->decoder_buffer_size >= min_buffer_size)
+ return;
- header->sequence_number = htons(sbc_info->seq_num++);
- header->timestamp = htonl(u->write_index / pa_frame_size(&u->sample_spec));
- header->ssrc = htonl(1);
- payload->frame_count = frame_count;
+ u->decoder_buffer_size = 2 * min_buffer_size;
+ pa_xfree(u->decoder_buffer);
+ u->decoder_buffer = pa_xmalloc(u->decoder_buffer_size);
+}
- nbytes = (uint8_t*) d - (uint8_t*) sbc_info->buffer;
+/* Run from IO thread */
+static int a2dp_write_buffer(struct userdata *u, size_t nbytes) {
+ int ret = 0;
for (;;) {
ssize_t l;
- l = pa_write(u->stream_fd, sbc_info->buffer, nbytes, &u->stream_write_type);
+ l = pa_write(u->stream_fd, u->encoder_buffer, nbytes, &u->stream_write_type);
pa_assert(l != 0);
@@ -565,37 +488,66 @@ static int a2dp_process_render(struct userdata *u) {
}
/* Run from IO thread */
+static int a2dp_process_render(struct userdata *u) {
+ const pa_a2dp_codec *a2dp_codec;
+ const uint8_t *ptr;
+ size_t processed;
+ size_t length;
+
+ pa_assert(u);
+ pa_assert(u->sink);
+
+ a2dp_codec = pa_bluetooth_profile_to_a2dp_codec(u->profile);
+
+ /* First, render some data */
+ if (!u->write_memchunk.memblock)
+ pa_sink_render_full(u->sink, u->write_block_size, &u->write_memchunk);
+
+ pa_assert(u->write_memchunk.length == u->write_block_size);
+
+ a2dp_prepare_encoder_buffer(u);
+
+ /* Try to create a packet of the full MTU */
+ ptr = (const uint8_t *) pa_memblock_acquire_chunk(&u->write_memchunk);
+
+ length = a2dp_codec->encode_buffer(pa_bluetooth_profile_is_a2dp_sink(u->profile) ? u->encoder_info : u->encoder_backchannel_info, u->write_index / pa_frame_size(&u->encoder_sample_spec), ptr, u->write_memchunk.length, u->encoder_buffer, u->encoder_buffer_size, &processed);
+
+ pa_memblock_release(u->write_memchunk.memblock);
+
+ if (length == 0)
+ return -1;
+
+ pa_assert(processed == u->write_memchunk.length);
+
+ return a2dp_write_buffer(u, length);
+}
+
+/* Run from IO thread */
static int a2dp_process_push(struct userdata *u) {
+ const pa_a2dp_codec *a2dp_codec;
int ret = 0;
pa_memchunk memchunk;
pa_assert(u);
- pa_assert(u->profile == PA_BLUETOOTH_PROFILE_A2DP_SOURCE);
pa_assert(u->source);
pa_assert(u->read_smoother);
+ a2dp_codec = pa_bluetooth_profile_to_a2dp_codec(u->profile);
+
memchunk.memblock = pa_memblock_new(u->core->mempool, u->read_block_size);
memchunk.index = memchunk.length = 0;
for (;;) {
bool found_tstamp = false;
pa_usec_t tstamp;
- struct sbc_info *sbc_info;
- struct rtp_header *header;
- struct rtp_payload *payload;
- const void *p;
- void *d;
+ uint8_t *ptr;
ssize_t l;
- size_t to_write, to_decode;
+ size_t processed;
size_t total_written = 0;
- a2dp_prepare_buffer(u);
+ a2dp_prepare_decoder_buffer(u);
- sbc_info = &u->sbc_info;
- header = sbc_info->buffer;
- payload = (struct rtp_payload*) ((uint8_t*) sbc_info->buffer + sizeof(*header));
-
- l = pa_read(u->stream_fd, sbc_info->buffer, sbc_info->buffer_size, &u->stream_write_type);
+ l = pa_read(u->stream_fd, u->decoder_buffer, u->decoder_buffer_size, &u->stream_write_type);
if (l <= 0) {
@@ -612,7 +564,7 @@ static int a2dp_process_push(struct userdata *u) {
break;
}
- pa_assert((size_t) l <= sbc_info->buffer_size);
+ pa_assert((size_t) l <= u->decoder_buffer_size);
/* TODO: get timestamp from rtp */
if (!found_tstamp) {
@@ -620,50 +572,18 @@ static int a2dp_process_push(struct userdata *u) {
tstamp = pa_rtclock_now();
}
- p = (uint8_t*) sbc_info->buffer + sizeof(*header) + sizeof(*payload);
- to_decode = l - sizeof(*header) - sizeof(*payload);
-
- d = pa_memblock_acquire(memchunk.memblock);
- to_write = memchunk.length = pa_memblock_get_length(memchunk.memblock);
-
- while (PA_LIKELY(to_decode > 0)) {
- size_t written;
- ssize_t decoded;
-
- decoded = sbc_decode(&sbc_info->sbc,
- p, to_decode,
- d, to_write,
- &written);
+ ptr = pa_memblock_acquire(memchunk.memblock);
+ memchunk.length = pa_memblock_get_length(memchunk.memblock);
- if (PA_UNLIKELY(decoded <= 0)) {
- pa_log_error("SBC decoding error (%li)", (long) decoded);
- pa_memblock_release(memchunk.memblock);
- pa_memblock_unref(memchunk.memblock);
- return 0;
- }
-
- total_written += written;
-
- /* Reset frame length, it can be changed due to bitpool change */
- sbc_info->frame_length = sbc_get_frame_length(&sbc_info->sbc);
-
- pa_assert_fp((size_t) decoded <= to_decode);
- pa_assert_fp((size_t) decoded == sbc_info->frame_length);
-
- pa_assert_fp((size_t) written == sbc_info->codesize);
-
- p = (const uint8_t*) p + decoded;
- to_decode -= decoded;
-
- d = (uint8_t*) d + written;
- to_write -= written;
- }
+ total_written = a2dp_codec->decode_buffer(pa_bluetooth_profile_is_a2dp_source(u->profile) ? u->decoder_info : u->decoder_backchannel_info, u->decoder_buffer, l, ptr, memchunk.length, &processed);
+ if (total_written == 0)
+ return 0;
u->read_index += (uint64_t) total_written;
- pa_smoother_put(u->read_smoother, tstamp, pa_bytes_to_usec(u->read_index, &u->sample_spec));
+ pa_smoother_put(u->read_smoother, tstamp, pa_bytes_to_usec(u->read_index, &u->decoder_sample_spec));
pa_smoother_resume(u->read_smoother, tstamp, true);
- memchunk.length -= to_write;
+ memchunk.length -= l - processed;
pa_memblock_release(memchunk.memblock);
@@ -678,7 +598,7 @@ static int a2dp_process_push(struct userdata *u) {
return ret;
}
-static void update_buffer_size(struct userdata *u) {
+static void update_sink_buffer_size(struct userdata *u) {
int old_bufsize;
socklen_t len = sizeof(int);
int ret;
@@ -710,72 +630,6 @@ static void update_buffer_size(struct userdata *u) {
}
}
-/* Run from I/O thread */
-static void a2dp_set_bitpool(struct userdata *u, uint8_t bitpool) {
- struct sbc_info *sbc_info;
-
- pa_assert(u);
-
- sbc_info = &u->sbc_info;
-
- if (sbc_info->sbc.bitpool == bitpool)
- return;
-
- if (bitpool > sbc_info->max_bitpool)
- bitpool = sbc_info->max_bitpool;
- else if (bitpool < sbc_info->min_bitpool)
- bitpool = sbc_info->min_bitpool;
-
- sbc_info->sbc.bitpool = bitpool;
-
- sbc_info->codesize = sbc_get_codesize(&sbc_info->sbc);
- sbc_info->frame_length = sbc_get_frame_length(&sbc_info->sbc);
-
- pa_log_debug("Bitpool has changed to %u", sbc_info->sbc.bitpool);
-
- u->read_block_size =
- (u->read_link_mtu - sizeof(struct rtp_header) - sizeof(struct rtp_payload))
- / sbc_info->frame_length * sbc_info->codesize;
-
- u->write_block_size =
- (u->write_link_mtu - sizeof(struct rtp_header) - sizeof(struct rtp_payload))
- / sbc_info->frame_length * sbc_info->codesize;
-
- pa_sink_set_max_request_within_thread(u->sink, u->write_block_size);
- pa_sink_set_fixed_latency_within_thread(u->sink,
- FIXED_LATENCY_PLAYBACK_A2DP + pa_bytes_to_usec(u->write_block_size, &u->sample_spec));
-
- /* If there is still data in the memchunk, we have to discard it
- * because the write_block_size may have changed. */
- if (u->write_memchunk.memblock) {
- pa_memblock_unref(u->write_memchunk.memblock);
- pa_memchunk_reset(&u->write_memchunk);
- }
-
- update_buffer_size(u);
-}
-
-/* Run from I/O thread */
-static void a2dp_reduce_bitpool(struct userdata *u) {
- struct sbc_info *sbc_info;
- uint8_t bitpool;
-
- pa_assert(u);
-
- sbc_info = &u->sbc_info;
-
- /* Check if bitpool is already at its limit */
- if (sbc_info->sbc.bitpool <= BITPOOL_DEC_LIMIT)
- return;
-
- bitpool = sbc_info->sbc.bitpool - BITPOOL_DEC_STEP;
-
- if (bitpool < BITPOOL_DEC_LIMIT)
- bitpool = BITPOOL_DEC_LIMIT;
-
- a2dp_set_bitpool(u, bitpool);
-}
-
static void teardown_stream(struct userdata *u) {
if (u->rtpoll_item) {
pa_rtpoll_item_free(u->rtpoll_item);
@@ -850,6 +704,24 @@ static void transport_release(struct userdata *u) {
}
/* Run from I/O thread */
+static void handle_sink_block_size_change(struct userdata *u) {
+ pa_sink_set_max_request_within_thread(u->sink, u->write_block_size);
+ pa_sink_set_fixed_latency_within_thread(u->sink,
+ (pa_bluetooth_profile_is_a2dp(u->profile) ?
+ FIXED_LATENCY_PLAYBACK_A2DP : FIXED_LATENCY_PLAYBACK_SCO) +
+ pa_bytes_to_usec(u->write_block_size, &u->encoder_sample_spec));
+
+ /* If there is still data in the memchunk, we have to discard it
+ * because the write_block_size may have changed. */
+ if (u->write_memchunk.memblock) {
+ pa_memblock_unref(u->write_memchunk.memblock);
+ pa_memchunk_reset(&u->write_memchunk);
+ }
+
+ update_sink_buffer_size(u);
+}
+
+/* Run from I/O thread */
static void transport_config_mtu(struct userdata *u) {
if (u->profile == PA_BLUETOOTH_PROFILE_HEADSET_HEAD_UNIT || u->profile == PA_BLUETOOTH_PROFILE_HEADSET_AUDIO_GATEWAY) {
u->read_block_size = u->read_link_mtu;
@@ -865,32 +737,31 @@ static void transport_config_mtu(struct userdata *u) {
u->write_block_size = pa_frame_align(u->write_block_size, &u->sink->sample_spec);
}
} else {
- u->read_block_size =
- (u->read_link_mtu - sizeof(struct rtp_header) - sizeof(struct rtp_payload))
- / u->sbc_info.frame_length * u->sbc_info.codesize;
-
- u->write_block_size =
- (u->write_link_mtu - sizeof(struct rtp_header) - sizeof(struct rtp_payload))
- / u->sbc_info.frame_length * u->sbc_info.codesize;
+ const pa_a2dp_codec *a2dp_codec = pa_bluetooth_profile_to_a2dp_codec(u->profile);
+ if (pa_bluetooth_profile_is_a2dp_sink(u->profile)) {
+ u->write_block_size = a2dp_codec->get_write_block_size(u->encoder_info, u->write_link_mtu);
+ if (u->source)
+ u->read_block_size = a2dp_codec->get_read_block_size(u->decoder_backchannel_info, u->read_link_mtu);
+ } else {
+ u->read_block_size = a2dp_codec->get_read_block_size(u->encoder_info, u->read_link_mtu);
+ if (u->sink)
+ u->write_block_size = a2dp_codec->get_write_block_size(u->encoder_backchannel_info, u->write_link_mtu);
+ }
}
- if (u->sink) {
- pa_sink_set_max_request_within_thread(u->sink, u->write_block_size);
- pa_sink_set_fixed_latency_within_thread(u->sink,
- (u->profile == PA_BLUETOOTH_PROFILE_A2DP_SINK ?
- FIXED_LATENCY_PLAYBACK_A2DP : FIXED_LATENCY_PLAYBACK_SCO) +
- pa_bytes_to_usec(u->write_block_size, &u->sample_spec));
- }
+ if (u->sink)
+ handle_sink_block_size_change(u);
if (u->source)
pa_source_set_fixed_latency_within_thread(u->source,
- (u->profile == PA_BLUETOOTH_PROFILE_A2DP_SOURCE ?
+ (pa_bluetooth_profile_is_a2dp(u->profile) ?
FIXED_LATENCY_RECORD_A2DP : FIXED_LATENCY_RECORD_SCO) +
- pa_bytes_to_usec(u->read_block_size, &u->sample_spec));
+ pa_bytes_to_usec(u->read_block_size, &u->decoder_sample_spec));
}
/* Run from I/O thread */
static void setup_stream(struct userdata *u) {
+ const pa_a2dp_codec *a2dp_codec;
struct pollfd *pollfd;
int one;
@@ -900,6 +771,19 @@ static void setup_stream(struct userdata *u) {
pa_log_info("Transport %s resuming", u->transport->path);
+ if (pa_bluetooth_profile_is_a2dp(u->profile)) {
+ a2dp_codec = pa_bluetooth_profile_to_a2dp_codec(u->profile);
+ if (pa_bluetooth_profile_is_a2dp_sink(u->profile)) {
+ a2dp_codec->reset_codec(u->encoder_info);
+ if (u->source)
+ a2dp_codec->reset_codec(u->decoder_backchannel_info);
+ } else {
+ a2dp_codec->reset_codec(u->decoder_info);
+ if (u->sink)
+ a2dp_codec->reset_codec(u->encoder_backchannel_info);
+ }
+ }
+
transport_config_mtu(u);
pa_make_fd_nonblock(u->stream_fd);
@@ -911,11 +795,6 @@ static void setup_stream(struct userdata *u) {
pa_log_debug("Stream properly set up, we're ready to roll!");
- if (u->profile == PA_BLUETOOTH_PROFILE_A2DP_SINK) {
- a2dp_set_bitpool(u, u->sbc_info.max_bitpool);
- update_buffer_size(u);
- }
-
u->rtpoll_item = pa_rtpoll_item_new(u->rtpoll, PA_RTPOLL_NEVER, 1);
pollfd = pa_rtpoll_item_get_pollfd(u->rtpoll_item, NULL);
pollfd->fd = u->stream_fd;
@@ -957,7 +836,7 @@ static int source_process_msg(pa_msgobject *o, int code, void *data, int64_t off
if (u->read_smoother) {
wi = pa_smoother_get(u->read_smoother, pa_rtclock_now());
- ri = pa_bytes_to_usec(u->read_index, &u->sample_spec);
+ ri = pa_bytes_to_usec(u->read_index, &u->decoder_sample_spec);
*((int64_t*) data) = u->source->thread_info.fixed_latency + wi - ri;
} else
@@ -1050,11 +929,11 @@ static void source_set_volume_cb(pa_source *s) {
if (volume < PA_VOLUME_NORM)
volume++;
- pa_cvolume_set(&s->real_volume, u->sample_spec.channels, volume);
+ pa_cvolume_set(&s->real_volume, u->decoder_sample_spec.channels, volume);
/* Set soft volume when in headset role */
if (u->profile == PA_BLUETOOTH_PROFILE_HEADSET_AUDIO_GATEWAY)
- pa_cvolume_set(&s->soft_volume, u->sample_spec.channels, volume);
+ pa_cvolume_set(&s->soft_volume, u->decoder_sample_spec.channels, volume);
/* If we are in the AG role, we send a command to the head set to change
* the microphone gain. In the HS role, source and sink are swapped, so
@@ -1075,31 +954,26 @@ static int add_source(struct userdata *u) {
data.name = pa_sprintf_malloc("bluez_source.%s.%s", u->device->address, pa_bluetooth_profile_to_string(u->profile));
data.namereg_fail = false;
pa_proplist_sets(data.proplist, "bluetooth.protocol", pa_bluetooth_profile_to_string(u->profile));
- pa_source_new_data_set_sample_spec(&data, &u->sample_spec);
+ pa_source_new_data_set_sample_spec(&data, &u->decoder_sample_spec);
if (u->profile == PA_BLUETOOTH_PROFILE_HEADSET_HEAD_UNIT)
pa_proplist_sets(data.proplist, PA_PROP_DEVICE_INTENDED_ROLES, "phone");
connect_ports(u, &data, PA_DIRECTION_INPUT);
- if (!u->transport_acquired)
- switch (u->profile) {
- case PA_BLUETOOTH_PROFILE_A2DP_SOURCE:
- case PA_BLUETOOTH_PROFILE_HEADSET_AUDIO_GATEWAY:
+ if (!u->transport_acquired) {
+ if (u->profile == PA_BLUETOOTH_PROFILE_HEADSET_AUDIO_GATEWAY || pa_bluetooth_profile_is_a2dp(u->profile)) {
+ data.suspend_cause = PA_SUSPEND_USER;
+ } else if (u->profile == PA_BLUETOOTH_PROFILE_HEADSET_HEAD_UNIT) {
+ /* u->stream_fd contains the error returned by the last transport_acquire()
+ * EAGAIN means we are waiting for a NewConnection signal */
+ if (u->stream_fd == -EAGAIN)
data.suspend_cause = PA_SUSPEND_USER;
- break;
- case PA_BLUETOOTH_PROFILE_HEADSET_HEAD_UNIT:
- /* u->stream_fd contains the error returned by the last transport_acquire()
- * EAGAIN means we are waiting for a NewConnection signal */
- if (u->stream_fd == -EAGAIN)
- data.suspend_cause = PA_SUSPEND_USER;
- else
- pa_assert_not_reached();
- break;
- case PA_BLUETOOTH_PROFILE_A2DP_SINK:
- case PA_BLUETOOTH_PROFILE_OFF:
+ else
pa_assert_not_reached();
- break;
+ } else {
+ pa_assert_not_reached();
}
+ }
u->source = pa_source_new(u->core, &data, PA_SOURCE_HARDWARE|PA_SOURCE_LATENCY);
pa_source_new_data_done(&data);
@@ -1133,10 +1007,10 @@ static int sink_process_msg(pa_msgobject *o, int code, void *data, int64_t offse
if (u->read_smoother) {
ri = pa_smoother_get(u->read_smoother, pa_rtclock_now());
- wi = pa_bytes_to_usec(u->write_index + u->write_block_size, &u->sample_spec);
+ wi = pa_bytes_to_usec(u->write_index + u->write_block_size, &u->encoder_sample_spec);
} else if (u->started_at) {
ri = pa_rtclock_now() - u->started_at;
- wi = pa_bytes_to_usec(u->write_index, &u->sample_spec);
+ wi = pa_bytes_to_usec(u->write_index, &u->encoder_sample_spec);
}
*((int64_t*) data) = u->sink->thread_info.fixed_latency + wi - ri;
@@ -1224,11 +1098,11 @@ static void sink_set_volume_cb(pa_sink *s) {
if (volume < PA_VOLUME_NORM)
volume++;
- pa_cvolume_set(&s->real_volume, u->sample_spec.channels, volume);
+ pa_cvolume_set(&s->real_volume, u->encoder_sample_spec.channels, volume);
/* Set soft volume when in headset role */
if (u->profile == PA_BLUETOOTH_PROFILE_HEADSET_AUDIO_GATEWAY)
- pa_cvolume_set(&s->soft_volume, u->sample_spec.channels, volume);
+ pa_cvolume_set(&s->soft_volume, u->encoder_sample_spec.channels, volume);
/* If we are in the AG role, we send a command to the head set to change
* the speaker gain. In the HS role, source and sink are swapped, so
@@ -1249,7 +1123,7 @@ static int add_sink(struct userdata *u) {
data.name = pa_sprintf_malloc("bluez_sink.%s.%s", u->device->address, pa_bluetooth_profile_to_string(u->profile));
data.namereg_fail = false;
pa_proplist_sets(data.proplist, "bluetooth.protocol", pa_bluetooth_profile_to_string(u->profile));
- pa_sink_new_data_set_sample_spec(&data, &u->sample_spec);
+ pa_sink_new_data_set_sample_spec(&data, &u->encoder_sample_spec);
if (u->profile == PA_BLUETOOTH_PROFILE_HEADSET_HEAD_UNIT)
pa_proplist_sets(data.proplist, PA_PROP_DEVICE_INTENDED_ROLES, "phone");
@@ -1268,10 +1142,8 @@ static int add_sink(struct userdata *u) {
else
pa_assert_not_reached();
break;
- case PA_BLUETOOTH_PROFILE_A2DP_SINK:
+ default:
/* Profile switch should have failed */
- case PA_BLUETOOTH_PROFILE_A2DP_SOURCE:
- case PA_BLUETOOTH_PROFILE_OFF:
pa_assert_not_reached();
break;
}
@@ -1295,117 +1167,71 @@ static int add_sink(struct userdata *u) {
}
/* Run from main thread */
-static void transport_config(struct userdata *u) {
+static int transport_config(struct userdata *u) {
if (u->profile == PA_BLUETOOTH_PROFILE_HEADSET_HEAD_UNIT || u->profile == PA_BLUETOOTH_PROFILE_HEADSET_AUDIO_GATEWAY) {
- u->sample_spec.format = PA_SAMPLE_S16LE;
- u->sample_spec.channels = 1;
- u->sample_spec.rate = 8000;
+ u->encoder_sample_spec.format = PA_SAMPLE_S16LE;
+ u->encoder_sample_spec.channels = 1;
+ u->encoder_sample_spec.rate = 8000;
+ u->decoder_sample_spec.format = PA_SAMPLE_S16LE;
+ u->decoder_sample_spec.channels = 1;
+ u->decoder_sample_spec.rate = 8000;
+ return 0;
} else {
- sbc_info_t *sbc_info = &u->sbc_info;
- a2dp_sbc_t *config;
+ const pa_a2dp_codec *a2dp_codec = pa_bluetooth_profile_to_a2dp_codec(u->profile);
+ bool is_a2dp_sink = pa_bluetooth_profile_is_a2dp_sink(u->profile);
+ void *info;
pa_assert(u->transport);
- u->sample_spec.format = PA_SAMPLE_S16LE;
- config = (a2dp_sbc_t *) u->transport->config;
-
- if (sbc_info->sbc_initialized)
- sbc_reinit(&sbc_info->sbc, 0);
- else
- sbc_init(&sbc_info->sbc, 0);
- sbc_info->sbc_initialized = true;
-
- switch (config->frequency) {
- case SBC_SAMPLING_FREQ_16000:
- sbc_info->sbc.frequency = SBC_FREQ_16000;
- u->sample_spec.rate = 16000U;
- break;
- case SBC_SAMPLING_FREQ_32000:
- sbc_info->sbc.frequency = SBC_FREQ_32000;
- u->sample_spec.rate = 32000U;
- break;
- case SBC_SAMPLING_FREQ_44100:
- sbc_info->sbc.frequency = SBC_FREQ_44100;
- u->sample_spec.rate = 44100U;
- break;
- case SBC_SAMPLING_FREQ_48000:
- sbc_info->sbc.frequency = SBC_FREQ_48000;
- u->sample_spec.rate = 48000U;
- break;
- default:
- pa_assert_not_reached();
- }
-
- switch (config->channel_mode) {
- case SBC_CHANNEL_MODE_MONO:
- sbc_info->sbc.mode = SBC_MODE_MONO;
- u->sample_spec.channels = 1;
- break;
- case SBC_CHANNEL_MODE_DUAL_CHANNEL:
- sbc_info->sbc.mode = SBC_MODE_DUAL_CHANNEL;
- u->sample_spec.channels = 2;
- break;
- case SBC_CHANNEL_MODE_STEREO:
- sbc_info->sbc.mode = SBC_MODE_STEREO;
- u->sample_spec.channels = 2;
- break;
- case SBC_CHANNEL_MODE_JOINT_STEREO:
- sbc_info->sbc.mode = SBC_MODE_JOINT_STEREO;
- u->sample_spec.channels = 2;
- break;
- default:
- pa_assert_not_reached();
+ info = is_a2dp_sink ? u->encoder_info : u->decoder_info;
+ if (info) {
+ a2dp_codec->finish_codec(info);
+ if (is_a2dp_sink)
+ u->encoder_info = NULL;
+ else
+ u->decoder_info = NULL;
}
- switch (config->allocation_method) {
- case SBC_ALLOCATION_SNR:
- sbc_info->sbc.allocation = SBC_AM_SNR;
- break;
- case SBC_ALLOCATION_LOUDNESS:
- sbc_info->sbc.allocation = SBC_AM_LOUDNESS;
- break;
- default:
- pa_assert_not_reached();
+ if (a2dp_codec->support_backchannel) {
+ info = is_a2dp_sink ? u->decoder_backchannel_info : u->encoder_backchannel_info;
+ if (info) {
+ a2dp_codec->finish_codec(info);
+ if (is_a2dp_sink)
+ u->decoder_backchannel_info = NULL;
+ else
+ u->encoder_backchannel_info = NULL;
+ }
}
- switch (config->subbands) {
- case SBC_SUBBANDS_4:
- sbc_info->sbc.subbands = SBC_SB_4;
- break;
- case SBC_SUBBANDS_8:
- sbc_info->sbc.subbands = SBC_SB_8;
- break;
- default:
- pa_assert_not_reached();
- }
+ info = a2dp_codec->init_codec(is_a2dp_sink, false, u->transport->config, u->transport->config_size, is_a2dp_sink ? &u->encoder_sample_spec : &u->decoder_sample_spec);
+ if (is_a2dp_sink)
+ u->encoder_info = info;
+ else
+ u->decoder_info = info;
- switch (config->block_length) {
- case SBC_BLOCK_LENGTH_4:
- sbc_info->sbc.blocks = SBC_BLK_4;
- break;
- case SBC_BLOCK_LENGTH_8:
- sbc_info->sbc.blocks = SBC_BLK_8;
- break;
- case SBC_BLOCK_LENGTH_12:
- sbc_info->sbc.blocks = SBC_BLK_12;
- break;
- case SBC_BLOCK_LENGTH_16:
- sbc_info->sbc.blocks = SBC_BLK_16;
- break;
- default:
- pa_assert_not_reached();
- }
+ if (!info)
+ return -1;
- sbc_info->min_bitpool = config->min_bitpool;
- sbc_info->max_bitpool = config->max_bitpool;
+ if (a2dp_codec->support_backchannel) {
+ info = a2dp_codec->init_codec(!is_a2dp_sink, true, u->transport->config, u->transport->config_size, !is_a2dp_sink ? &u->encoder_sample_spec : &u->decoder_sample_spec);
+ if (is_a2dp_sink)
+ u->decoder_backchannel_info = info;
+ else
+ u->encoder_backchannel_info = info;
- /* Set minimum bitpool for source to get the maximum possible block_size */
- sbc_info->sbc.bitpool = u->profile == PA_BLUETOOTH_PROFILE_A2DP_SINK ? sbc_info->max_bitpool : sbc_info->min_bitpool;
- sbc_info->codesize = sbc_get_codesize(&sbc_info->sbc);
- sbc_info->frame_length = sbc_get_frame_length(&sbc_info->sbc);
+ if (!info) {
+ if (is_a2dp_sink) {
+ a2dp_codec->finish_codec(u->encoder_info);
+ u->encoder_info = NULL;
+ } else {
+ a2dp_codec->finish_codec(u->decoder_info);
+ u->decoder_info = NULL;
+ }
+ return -1;
+ }
+ }
- pa_log_info("SBC parameters: allocation=%u, subbands=%u, blocks=%u, bitpool=%u",
- sbc_info->sbc.allocation, sbc_info->sbc.subbands ? 8 : 4, sbc_info->sbc.blocks, sbc_info->sbc.bitpool);
+ return 0;
}
}
@@ -1420,13 +1246,20 @@ static int setup_transport(struct userdata *u) {
/* check if profile has a transport */
t = u->device->transports[u->profile];
if (!t || t->state <= PA_BLUETOOTH_TRANSPORT_STATE_DISCONNECTED) {
- pa_log_warn("Profile %s has no transport", pa_bluetooth_profile_to_string(u->profile));
- return -1;
+ if (!pa_bluetooth_profile_is_a2dp(u->profile) || !u->support_a2dp_codec_switch) {
+ pa_log_warn("Profile %s has no transport", pa_bluetooth_profile_to_string(u->profile));
+ return -1;
+ }
+ if (!pa_bluetooth_device_change_a2dp_profile(u->device, u->profile))
+ return -1;
+ /* TODO: How to asynchronously wait until new transport is established and A2DP profile changed? */
+ /* FIXME: Changing A2DP endpoint is now in progress, so try setup transport later. */
+ return -EAGAIN;
}
u->transport = t;
- if (u->profile == PA_BLUETOOTH_PROFILE_A2DP_SOURCE || u->profile == PA_BLUETOOTH_PROFILE_HEADSET_AUDIO_GATEWAY)
+ if (pa_bluetooth_profile_is_a2dp_source(u->profile) || u->profile == PA_BLUETOOTH_PROFILE_HEADSET_AUDIO_GATEWAY)
transport_acquire(u, true); /* In case of error, the sink/sources will be created suspended */
else {
int transport_error;
@@ -1436,22 +1269,27 @@ static int setup_transport(struct userdata *u) {
return -1; /* We need to fail here until the interactions with module-suspend-on-idle and alike get improved */
}
- transport_config(u);
-
- return 0;
+ return transport_config(u);
}
/* Run from main thread */
static pa_direction_t get_profile_direction(pa_bluetooth_profile_t p) {
- static const pa_direction_t profile_direction[] = {
- [PA_BLUETOOTH_PROFILE_A2DP_SINK] = PA_DIRECTION_OUTPUT,
- [PA_BLUETOOTH_PROFILE_A2DP_SOURCE] = PA_DIRECTION_INPUT,
- [PA_BLUETOOTH_PROFILE_HEADSET_HEAD_UNIT] = PA_DIRECTION_INPUT | PA_DIRECTION_OUTPUT,
- [PA_BLUETOOTH_PROFILE_HEADSET_AUDIO_GATEWAY] = PA_DIRECTION_INPUT | PA_DIRECTION_OUTPUT,
- [PA_BLUETOOTH_PROFILE_OFF] = 0
- };
-
- return profile_direction[p];
+ if (p == PA_BLUETOOTH_PROFILE_HEADSET_HEAD_UNIT || p == PA_BLUETOOTH_PROFILE_HEADSET_AUDIO_GATEWAY)
+ return PA_DIRECTION_INPUT | PA_DIRECTION_OUTPUT;
+ else if (p == PA_BLUETOOTH_PROFILE_OFF)
+ return 0;
+ else if (pa_bluetooth_profile_is_a2dp_sink(p)) {
+ if (pa_bluetooth_profile_support_a2dp_backchannel(p))
+ return PA_DIRECTION_INPUT | PA_DIRECTION_OUTPUT;
+ else
+ return PA_DIRECTION_OUTPUT;
+ } else if (pa_bluetooth_profile_is_a2dp_source(p)) {
+ if (pa_bluetooth_profile_support_a2dp_backchannel(p))
+ return PA_DIRECTION_INPUT | PA_DIRECTION_OUTPUT;
+ else
+ return PA_DIRECTION_INPUT;
+ } else
+ pa_assert_not_reached();
}
/* Run from main thread */
@@ -1482,7 +1320,7 @@ static int write_block(struct userdata *u) {
if (u->write_index <= 0)
u->started_at = pa_rtclock_now();
- if (u->profile == PA_BLUETOOTH_PROFILE_A2DP_SINK) {
+ if (pa_bluetooth_profile_is_a2dp(u->profile)) {
if ((n_written = a2dp_process_render(u)) < 0)
return -1;
} else {
@@ -1556,7 +1394,7 @@ static void thread_func(void *userdata) {
if (pollfd->revents & POLLIN) {
int n_read;
- if (u->profile == PA_BLUETOOTH_PROFILE_A2DP_SOURCE)
+ if (pa_bluetooth_profile_is_a2dp(u->profile))
n_read = a2dp_process_push(u);
else
n_read = sco_process_push(u);
@@ -1564,7 +1402,7 @@ static void thread_func(void *userdata) {
if (n_read < 0)
goto fail;
- if (n_read > 0) {
+ if (!pa_bluetooth_profile_is_a2dp(u->profile) && n_read > 0) {
/* We just read something, so we are supposed to write something, too */
bytes_to_write += n_read;
blocks_to_write += bytes_to_write / u->write_block_size;
@@ -1586,7 +1424,7 @@ static void thread_func(void *userdata) {
/* If we have a source, we let the source determine the timing
* for the sink */
- if (have_source) {
+ if (!pa_bluetooth_profile_is_a2dp(u->profile) && have_source) {
if (writable && blocks_to_write > 0) {
int result;
@@ -1618,12 +1456,12 @@ static void thread_func(void *userdata) {
if (u->started_at) {
time_passed = pa_rtclock_now() - u->started_at;
- audio_sent = pa_bytes_to_usec(u->write_index, &u->sample_spec);
+ audio_sent = pa_bytes_to_usec(u->write_index, &u->encoder_sample_spec);
}
/* A new block needs to be sent. */
if (audio_sent <= time_passed) {
- size_t bytes_to_send = pa_usec_to_bytes(time_passed - audio_sent, &u->sample_spec);
+ size_t bytes_to_send = pa_usec_to_bytes(time_passed - audio_sent, &u->encoder_sample_spec);
/* There are more than two blocks that need to be written. It seems that
* the socket has not been accepting data fast enough (could be due to
@@ -1636,7 +1474,7 @@ static void thread_func(void *userdata) {
pa_usec_t skip_usec;
skip_bytes = bytes_to_send - 2 * u->write_block_size;
- skip_usec = pa_bytes_to_usec(skip_bytes, &u->sample_spec);
+ skip_usec = pa_bytes_to_usec(skip_bytes, &u->encoder_sample_spec);
pa_log_debug("Skipping %llu us (= %llu bytes) in audio stream",
(unsigned long long) skip_usec,
@@ -1656,8 +1494,14 @@ static void thread_func(void *userdata) {
skip_bytes -= bytes_to_render;
}
- if (u->write_index > 0 && u->profile == PA_BLUETOOTH_PROFILE_A2DP_SINK)
- a2dp_reduce_bitpool(u);
+ if (u->write_index > 0 && pa_bluetooth_profile_is_a2dp(u->profile)) {
+ const pa_a2dp_codec *a2dp_codec = pa_bluetooth_profile_to_a2dp_codec(u->profile);
+ size_t new_write_block_size = a2dp_codec->reduce_encoder_bitrate(pa_bluetooth_profile_is_a2dp_sink(u->profile) ? u->encoder_info : u->encoder_backchannel_info, u->write_link_mtu);
+ if (new_write_block_size) {
+ u->write_block_size = new_write_block_size;
+ handle_sink_block_size_change(u);
+ }
+ }
}
blocks_to_write = 1;
@@ -1686,7 +1530,7 @@ static void thread_func(void *userdata) {
if (writable) {
/* There was no write pending on this iteration of the loop.
* Let's estimate when we need to wake up next */
- next_write_at = pa_bytes_to_usec(u->write_index, &u->sample_spec);
+ next_write_at = pa_bytes_to_usec(u->write_index, &u->encoder_sample_spec);
sleep_for = time_passed < next_write_at ? next_write_at - time_passed : 0;
/* pa_log("Sleeping for %lu; time passed %lu, next write at %lu", (unsigned long) sleep_for, (unsigned long) time_passed, (unsigned long)next_write_at); */
} else
@@ -1772,7 +1616,7 @@ static int start_thread(struct userdata *u) {
/* If we are in the headset role or the device is an a2dp source,
* the source should not become default unless there is no other
* sound device available. */
- if (u->profile == PA_BLUETOOTH_PROFILE_HEADSET_AUDIO_GATEWAY || u->profile == PA_BLUETOOTH_PROFILE_A2DP_SOURCE)
+ if (u->profile == PA_BLUETOOTH_PROFILE_HEADSET_AUDIO_GATEWAY || pa_bluetooth_profile_is_a2dp_source(u->profile))
u->source->priority = 1500;
pa_source_put(u->source);
@@ -1786,6 +1630,8 @@ static int start_thread(struct userdata *u) {
/* Run from main thread */
static void stop_thread(struct userdata *u) {
+ const pa_a2dp_codec *a2dp_codec;
+
pa_assert(u);
if (u->sink)
@@ -1830,17 +1676,42 @@ static void stop_thread(struct userdata *u) {
pa_smoother_free(u->read_smoother);
u->read_smoother = NULL;
}
+
+ if (pa_bluetooth_profile_is_a2dp(u->profile)) {
+ a2dp_codec = pa_bluetooth_profile_to_a2dp_codec(u->profile);
+
+ if (u->encoder_info) {
+ a2dp_codec->finish_codec(u->encoder_info);
+ u->encoder_info = NULL;
+ }
+
+ if (u->decoder_info) {
+ a2dp_codec->finish_codec(u->decoder_info);
+ u->decoder_info = NULL;
+ }
+
+ if (u->decoder_backchannel_info) {
+ a2dp_codec->finish_codec(u->decoder_backchannel_info);
+ u->decoder_backchannel_info = NULL;
+ }
+
+ if (u->encoder_backchannel_info) {
+ a2dp_codec->finish_codec(u->encoder_backchannel_info);
+ u->encoder_backchannel_info = NULL;
+ }
+ }
}
/* Run from main thread */
static pa_available_t get_port_availability(struct userdata *u, pa_direction_t direction) {
pa_available_t result = PA_AVAILABLE_NO;
- unsigned i;
+ unsigned i, count;
pa_assert(u);
pa_assert(u->device);
- for (i = 0; i < PA_BLUETOOTH_PROFILE_COUNT; i++) {
+ count = pa_bluetooth_profile_count();
+ for (i = 0; i < count; i++) {
pa_bluetooth_transport *transport;
if (!(get_profile_direction(i) & direction))
@@ -1974,8 +1845,12 @@ static void create_card_ports(struct userdata *u, pa_hashmap *ports) {
static pa_card_profile *create_card_profile(struct userdata *u, pa_bluetooth_profile_t profile, pa_hashmap *ports) {
pa_device_port *input_port, *output_port;
const char *name;
+ char *description;
pa_card_profile *cp = NULL;
pa_bluetooth_profile_t *p;
+ const pa_a2dp_codec *a2dp_codec;
+ bool is_a2dp_sink;
+ bool support_backchannel;
pa_assert(u->input_port_name);
pa_assert(u->output_port_name);
@@ -1984,34 +1859,9 @@ static pa_card_profile *create_card_profile(struct userdata *u, pa_bluetooth_pro
name = pa_bluetooth_profile_to_string(profile);
- switch (profile) {
- case PA_BLUETOOTH_PROFILE_A2DP_SINK:
- cp = pa_card_profile_new(name, _("High Fidelity Playback (A2DP Sink)"), sizeof(pa_bluetooth_profile_t));
- cp->priority = 40;
- cp->n_sinks = 1;
- cp->n_sources = 0;
- cp->max_sink_channels = 2;
- cp->max_source_channels = 0;
- pa_hashmap_put(output_port->profiles, cp->name, cp);
-
- p = PA_CARD_PROFILE_DATA(cp);
- break;
-
- case PA_BLUETOOTH_PROFILE_A2DP_SOURCE:
- cp = pa_card_profile_new(name, _("High Fidelity Capture (A2DP Source)"), sizeof(pa_bluetooth_profile_t));
- cp->priority = 20;
- cp->n_sinks = 0;
- cp->n_sources = 1;
- cp->max_sink_channels = 0;
- cp->max_source_channels = 2;
- pa_hashmap_put(input_port->profiles, cp->name, cp);
-
- p = PA_CARD_PROFILE_DATA(cp);
- break;
-
- case PA_BLUETOOTH_PROFILE_HEADSET_HEAD_UNIT:
+ if (profile == PA_BLUETOOTH_PROFILE_HEADSET_HEAD_UNIT) {
cp = pa_card_profile_new(name, _("Headset Head Unit (HSP/HFP)"), sizeof(pa_bluetooth_profile_t));
- cp->priority = 30;
+ cp->priority = profile;
cp->n_sinks = 1;
cp->n_sources = 1;
cp->max_sink_channels = 1;
@@ -2020,11 +1870,9 @@ static pa_card_profile *create_card_profile(struct userdata *u, pa_bluetooth_pro
pa_hashmap_put(output_port->profiles, cp->name, cp);
p = PA_CARD_PROFILE_DATA(cp);
- break;
-
- case PA_BLUETOOTH_PROFILE_HEADSET_AUDIO_GATEWAY:
+ } else if (profile == PA_BLUETOOTH_PROFILE_HEADSET_AUDIO_GATEWAY) {
cp = pa_card_profile_new(name, _("Headset Audio Gateway (HSP/HFP)"), sizeof(pa_bluetooth_profile_t));
- cp->priority = 10;
+ cp->priority = profile;
cp->n_sinks = 1;
cp->n_sources = 1;
cp->max_sink_channels = 1;
@@ -2033,9 +1881,37 @@ static pa_card_profile *create_card_profile(struct userdata *u, pa_bluetooth_pro
pa_hashmap_put(output_port->profiles, cp->name, cp);
p = PA_CARD_PROFILE_DATA(cp);
- break;
+ } else if (pa_bluetooth_profile_is_a2dp(profile)) {
+ a2dp_codec = pa_bluetooth_profile_to_a2dp_codec(profile);
+ is_a2dp_sink = pa_bluetooth_profile_is_a2dp_sink(profile);
+ support_backchannel = pa_bluetooth_profile_support_a2dp_backchannel(profile);
+
+ if (is_a2dp_sink)
+ description = pa_sprintf_malloc(_("High Fidelity Playback (A2DP Sink) with codec %s"), a2dp_codec->codec_description);
+ else
+ description = pa_sprintf_malloc(_("High Fidelity Capture (A2DP Source) with codec %s"), a2dp_codec->codec_description);
+
+ cp = pa_card_profile_new(name, description, sizeof(pa_bluetooth_profile_t));
+ pa_xfree(description);
+
+ cp->priority = profile;
+
+ if (is_a2dp_sink) {
+ cp->n_sinks = 1;
+ cp->n_sources = support_backchannel ? 1 : 0;
+ cp->max_sink_channels = 2;
+ cp->max_source_channels = support_backchannel ? 1 : 0;
+ } else {
+ cp->n_sinks = support_backchannel ? 1 : 0;
+ cp->n_sources = 1;
+ cp->max_sink_channels = support_backchannel ? 1 : 0;
+ cp->max_source_channels = 2;
+ }
- case PA_BLUETOOTH_PROFILE_OFF:
+ pa_hashmap_put(output_port->profiles, cp->name, cp);
+
+ p = PA_CARD_PROFILE_DATA(cp);
+ } else {
pa_assert_not_reached();
}
@@ -2063,7 +1939,7 @@ static int set_profile_cb(pa_card *c, pa_card_profile *new_profile) {
if (*p != PA_BLUETOOTH_PROFILE_OFF) {
const pa_bluetooth_device *d = u->device;
- if (!d->transports[*p] || d->transports[*p]->state <= PA_BLUETOOTH_TRANSPORT_STATE_DISCONNECTED) {
+ if ((!d->transports[*p] || d->transports[*p]->state <= PA_BLUETOOTH_TRANSPORT_STATE_DISCONNECTED) && (!pa_bluetooth_profile_is_a2dp(*p) || !u->support_a2dp_codec_switch)) {
pa_log_warn("Refused to switch profile to %s: Not connected", new_profile->name);
return -PA_ERR_IO;
}
@@ -2091,21 +1967,6 @@ off:
return -PA_ERR_IO;
}
-static int uuid_to_profile(const char *uuid, pa_bluetooth_profile_t *_r) {
- if (pa_streq(uuid, PA_BLUETOOTH_UUID_A2DP_SINK))
- *_r = PA_BLUETOOTH_PROFILE_A2DP_SINK;
- else if (pa_streq(uuid, PA_BLUETOOTH_UUID_A2DP_SOURCE))
- *_r = PA_BLUETOOTH_PROFILE_A2DP_SOURCE;
- else if (pa_bluetooth_uuid_is_hsp_hs(uuid) || pa_streq(uuid, PA_BLUETOOTH_UUID_HFP_HF))
- *_r = PA_BLUETOOTH_PROFILE_HEADSET_HEAD_UNIT;
- else if (pa_streq(uuid, PA_BLUETOOTH_UUID_HSP_AG) || pa_streq(uuid, PA_BLUETOOTH_UUID_HFP_AG))
- *_r = PA_BLUETOOTH_PROFILE_HEADSET_AUDIO_GATEWAY;
- else
- return -PA_ERR_INVALID;
-
- return 0;
-}
-
/* Run from main thread */
static int add_card(struct userdata *u) {
const pa_bluetooth_device *d;
@@ -2114,6 +1975,8 @@ static int add_card(struct userdata *u) {
pa_bluetooth_form_factor_t ff;
pa_card_profile *cp;
pa_bluetooth_profile_t *p;
+ bool have_a2dp_sink;
+ bool have_a2dp_source;
const char *uuid;
void *state;
@@ -2146,11 +2009,23 @@ static int add_card(struct userdata *u) {
create_card_ports(u, data.ports);
+ have_a2dp_sink = false;
+ have_a2dp_source = false;
+
PA_HASHMAP_FOREACH(uuid, d->uuids, state) {
pa_bluetooth_profile_t profile;
- if (uuid_to_profile(uuid, &profile) < 0)
+ if (pa_bluetooth_uuid_is_hsp_hs(uuid) || pa_streq(uuid, PA_BLUETOOTH_UUID_HFP_HF))
+ profile = PA_BLUETOOTH_PROFILE_HEADSET_HEAD_UNIT;
+ else if (pa_streq(uuid, PA_BLUETOOTH_UUID_HSP_AG) || pa_streq(uuid, PA_BLUETOOTH_UUID_HFP_AG))
+ profile = PA_BLUETOOTH_PROFILE_HEADSET_AUDIO_GATEWAY;
+ else {
+ if (pa_streq(uuid, PA_BLUETOOTH_UUID_A2DP_SINK))
+ have_a2dp_sink = true;
+ else if (pa_streq(uuid, PA_BLUETOOTH_UUID_A2DP_SOURCE))
+ have_a2dp_source = true;
continue;
+ }
if (pa_hashmap_get(data.profiles, pa_bluetooth_profile_to_string(profile)))
continue;
@@ -2159,6 +2034,76 @@ static int add_card(struct userdata *u) {
pa_hashmap_put(data.profiles, cp->name, cp);
}
+ if ((pa_hashmap_isempty(d->a2dp_sink_endpoints) && have_a2dp_sink) || (pa_hashmap_isempty(d->a2dp_source_endpoints) && have_a2dp_source)) {
+ /*
+ * We are running old version of bluez which does not announce supported codecs
+ * by remote device nor does not support codec switching. Create profile for
+ * every supported codec by pulseaudio and bluez or remote device will choose one.
+ * Therefore user will see all also unavilable profiles, but would not be able
+ * to switch codec.
+ */
+ unsigned i, count;
+
+ pa_log_warn("Detected old bluez version, changing A2DP codec is not possible");
+ u->support_a2dp_codec_switch = false;
+
+ count = pa_bluetooth_profile_count();
+ for (i = 0; i < count; i++) {
+ if (have_a2dp_sink && !pa_bluetooth_profile_is_a2dp_sink(i))
+ continue;
+
+ if (have_a2dp_source && !pa_bluetooth_profile_is_a2dp_source(i))
+ continue;
+
+ if (pa_hashmap_get(data.profiles, pa_bluetooth_profile_to_string(i)))
+ continue;
+
+ cp = create_card_profile(u, i, data.ports);
+ pa_hashmap_put(data.profiles, cp->name, cp);
+ }
+ } else {
+ const pa_a2dp_codec *a2dp_codec;
+ pa_bluetooth_profile_t profile;
+ pa_hashmap *endpoints;
+ const char *endpoint;
+ unsigned i, count;
+
+ u->support_a2dp_codec_switch = true;
+
+ count = pa_bluetooth_a2dp_codec_count();
+ for (i = 0; i < count; i++) {
+ a2dp_codec = pa_bluetooth_a2dp_codec_iter(i);
+
+ endpoints = pa_hashmap_get(d->a2dp_sink_endpoints, &a2dp_codec->codec_id);
+ if (endpoints) {
+ endpoint = a2dp_codec->choose_capabilities(endpoints, true);
+ if (endpoint) {
+ profile = pa_bluetooth_profile_for_a2dp_codec(a2dp_codec->codec_name, true);
+ if (!pa_hashmap_get(data.profiles, pa_bluetooth_profile_to_string(profile))) {
+ cp = create_card_profile(u, profile, data.ports);
+ pa_hashmap_put(data.profiles, cp->name, cp);
+ }
+ pa_log_info("Detected codec %s on sink endpoint %s", a2dp_codec->codec_name, endpoint);
+ pa_hashmap_put(d->a2dp_sink_codecs, (void *)a2dp_codec->codec_name, (void *)endpoint);
+ }
+ }
+
+ endpoints = pa_hashmap_get(d->a2dp_source_endpoints, &a2dp_codec->codec_id);
+ if (endpoints) {
+ endpoint = a2dp_codec->choose_capabilities(endpoints, false);
+ if (endpoint) {
+ profile = pa_bluetooth_profile_for_a2dp_codec(a2dp_codec->codec_name, false);
+ if (!pa_hashmap_get(data.profiles, pa_bluetooth_profile_to_string(profile))) {
+ cp = create_card_profile(u, profile, data.ports);
+ pa_hashmap_put(data.profiles, cp->name, cp);
+ }
+ pa_log_info("Detected codec %s on source endpoint %s", a2dp_codec->codec_name, endpoint);
+ pa_hashmap_put(d->a2dp_source_codecs, (void *)a2dp_codec->codec_name, (void *)endpoint);
+ }
+ }
+ }
+ }
+
pa_assert(!pa_hashmap_isempty(data.profiles));
cp = pa_card_profile_new("off", _("Off"), sizeof(pa_bluetooth_profile_t));
@@ -2309,7 +2254,7 @@ static pa_hook_result_t transport_speaker_gain_changed_cb(pa_bluetooth_discovery
if (volume < PA_VOLUME_NORM)
volume++;
- pa_cvolume_set(&v, u->sample_spec.channels, volume);
+ pa_cvolume_set(&v, u->encoder_sample_spec.channels, volume);
if (t->profile == PA_BLUETOOTH_PROFILE_HEADSET_HEAD_UNIT)
pa_sink_volume_changed(u->sink, &v);
else
@@ -2336,7 +2281,7 @@ static pa_hook_result_t transport_microphone_gain_changed_cb(pa_bluetooth_discov
if (volume < PA_VOLUME_NORM)
volume++;
- pa_cvolume_set(&v, u->sample_spec.channels, volume);
+ pa_cvolume_set(&v, u->decoder_sample_spec.channels, volume);
if (t->profile == PA_BLUETOOTH_PROFILE_HEADSET_HEAD_UNIT)
pa_source_volume_changed(u->source, &v);
@@ -2477,6 +2422,7 @@ fail:
void pa__done(pa_module *m) {
struct userdata *u;
+ const pa_a2dp_codec *a2dp_codec;
pa_assert(m);
@@ -2497,11 +2443,23 @@ void pa__done(pa_module *m) {
if (u->transport_microphone_gain_changed_slot)
pa_hook_slot_free(u->transport_microphone_gain_changed_slot);
- if (u->sbc_info.buffer)
- pa_xfree(u->sbc_info.buffer);
-
- if (u->sbc_info.sbc_initialized)
- sbc_finish(&u->sbc_info.sbc);
+ if (u->encoder_buffer)
+ pa_xfree(u->encoder_buffer);
+
+ if (u->decoder_buffer)
+ pa_xfree(u->decoder_buffer);
+
+ if (pa_bluetooth_profile_is_a2dp(u->profile)) {
+ a2dp_codec = pa_bluetooth_profile_to_a2dp_codec(u->profile);
+ if (u->encoder_info)
+ a2dp_codec->finish_codec(u->encoder_info);
+ if (u->decoder_info)
+ a2dp_codec->finish_codec(u->decoder_info);
+ if (u->encoder_backchannel_info)
+ a2dp_codec->finish_codec(u->encoder_backchannel_info);
+ if (u->decoder_backchannel_info)
+ a2dp_codec->finish_codec(u->decoder_backchannel_info);
+ }
if (u->msg)
pa_xfree(u->msg);
--
2.11.0
More information about the pulseaudio-discuss
mailing list