[pulseaudio-discuss] [PATCH v13 10/10] bluetooth: policy: Treat bi-directional A2DP profiles as suitable for VOIP
Pali Rohár
pali.rohar at gmail.com
Mon Oct 7 13:36:21 UTC 2019
I will try to look what is the problem without --experimental. This
should work correctly prior merging this PR.
Need to --experimental is just temporary until support in bluez is not
fully stable. I guess it would be non-experimental in next bluez
version.
Also there would not be any feature/functional changes in pulseaudio
when older bluez version is in use. So also no change in automatic mode
for older bluez versions.
On Monday 07 October 2019 15:30:49 Hyperion wrote:
> Without the --experimental flag : negociation stops (see hcidump below) and device falls back to "Off" status.
>
> btw : if you implement my (simple) negociation algorithm for the "Automatic Quality" mode ; AND make it to work without --experimental Bluez flag : it woiuld be close to perfect.
>
> See my latest patch https://gitlab.freedesktop.org/Hyperion/pulseaudio/tree/SBC-XQ
>
> jp
>
> 07.10.2019, 15:25, "Pali Rohár" <pali.rohar at gmail.com>:
> > And what happened without --experimental?
> >
> > Aim is to support all bluez versions also with and without
> > --experimental flag. Just for older versions (or without experimental)
> > it should behave like before this patch series -- only SBC codec in
> > automatic mode and no codec switching.
> >
> > On Monday 07 October 2019 15:20:35 Hyperion wrote:
> >> Thanks, I forgot the "--experimental" param.
> >>
> >> Works as expected, like the previous v12 serie of patches
> >>
> >> JP
> >>
> >> 07.10.2019, 15:15, "Pali Rohár" <pali.rohar at gmail.com>:
> >> > Can you check if you have Bluez 5.51 and bluetoothd daemon is running with --experimental param?
> >> >
> >> > And is not it possible to change profile from Off to Automatic Quality?
> >> >
> >> > On Monday 07 October 2019 15:08:59 Hyperion wrote:
> >> >> The 10 patches compile OK on PA master without warnings.
> >> >>
> >> >> But doesn't work (device is Off with "Automatic Quality unavailable" status).
> >> >>
> >> >> Tested on 2 devices.
> >> >>
> >> >> hcidump avdtp
> >> >> HCI sniffer - Bluetooth packet analyzer ver 5.51
> >> >> device: hci0 snap_len: 1500 filter: 0x400
> >> >> < AVDTP(s): Discover cmd: transaction 9 nsp 0x00
> >> >> > AVDTP(s): Discover rsp: transaction 9 nsp 0x00
> >> >> ACP SEID 1 - Audio Sink
> >> >> ACP SEID 2 - Audio Sink
> >> >> ACP SEID 3 - Audio Sink
> >> >> < AVDTP(s): Set config cmd: transaction 10 nsp 0x00
> >> >> ACP SEID 1 - INT SEID 2
> >> >> Media Transport
> >> >> Media Codec - SBC
> >> >> 44.1kHz
> >> >> DualChannel
> >> >> 16 Blocks
> >> >> 8 Subbands
> >> >> Loudness
> >> >> Bitpool Range 38-38
> >> >> > AVDTP(s): Set config rsp: transaction 10 nsp 0x00
> >> >> < AVDTP(s): Open cmd: transaction 11 nsp 0x00
> >> >> ACP SEID 1
> >> >> > AVDTP(s): Open rsp: transaction 11 nsp 0x00
> >> >>
> >> >> 06.10.2019, 19:59, "Pali Rohár" <pali.rohar at gmail.com>:
> >> >> > Previously module-bluetooth-policy was switching from A2DP to HSP profile
> >> >> > when VOIP application started recording of source. Now it switch to profile
> >> >> > with the highest priority which has both sink and source. In most cases it
> >> >> > is HSP profile, but it can be also bi-directional A2DP profile (e.g.
> >> >> > FastStream codec) as it has better audio quality.
> >> >> > ---
> >> >> > src/modules/bluetooth/module-bluetooth-policy.c | 123 ++++++++++++------------
> >> >> > 1 file changed, 62 insertions(+), 61 deletions(-)
> >> >> >
> >> >> > diff --git a/src/modules/bluetooth/module-bluetooth-policy.c b/src/modules/bluetooth/module-bluetooth-policy.c
> >> >> > index 04313aa84..9652a91fe 100644
> >> >> > --- a/src/modules/bluetooth/module-bluetooth-policy.c
> >> >> > +++ b/src/modules/bluetooth/module-bluetooth-policy.c
> >> >> > @@ -59,7 +59,12 @@ struct userdata {
> >> >> > pa_hook_slot *card_init_profile_slot;
> >> >> > pa_hook_slot *card_unlink_slot;
> >> >> > pa_hook_slot *profile_available_changed_slot;
> >> >> > - pa_hashmap *will_need_revert_card_map;
> >> >> > + pa_hashmap *profile_switch_map;
> >> >> > +};
> >> >> > +
> >> >> > +struct profile_switch {
> >> >> > + const char *from_profile;
> >> >> > + const char *to_profile;
> >> >> > };
> >> >> >
> >> >> > /* When a source is created, loopback it to default sink */
> >> >> > @@ -142,43 +147,57 @@ static pa_hook_result_t sink_put_hook_callback(pa_core *c, pa_sink *sink, void *
> >> >> > return PA_HOOK_OK;
> >> >> > }
> >> >> >
> >> >> > -static void card_set_profile(struct userdata *u, pa_card *card, bool revert_to_a2dp)
> >> >> > -{
> >> >> > +static void card_set_profile(struct userdata *u, pa_card *card, const char *revert_to_profile_name) {
> >> >> > + pa_card_profile *iter_profile;
> >> >> > pa_card_profile *profile;
> >> >> > + struct profile_switch *ps;
> >> >> > + char *old_profile_name;
> >> >> > void *state;
> >> >> >
> >> >> > - /* Find available profile and activate it */
> >> >> > - PA_HASHMAP_FOREACH(profile, card->profiles, state) {
> >> >> > - if (profile->available == PA_AVAILABLE_NO)
> >> >> > - continue;
> >> >> > -
> >> >> > - /* Check for correct profile based on revert_to_a2dp */
> >> >> > - if (revert_to_a2dp) {
> >> >> > - if (!pa_startswith(profile->name, "a2dp_sink"))
> >> >> > + if (revert_to_profile_name) {
> >> >> > + profile = pa_hashmap_get(card->profiles, revert_to_profile_name);
> >> >> > + } else {
> >> >> > + /* Find highest priority profile with both sink and source */
> >> >> > + profile = NULL;
> >> >> > + PA_HASHMAP_FOREACH(iter_profile, card->profiles, state) {
> >> >> > + if (iter_profile->available == PA_AVAILABLE_NO)
> >> >> > continue;
> >> >> > - } else {
> >> >> > - if (!pa_streq(profile->name, "headset_head_unit"))
> >> >> > + if (iter_profile->n_sources == 0 || iter_profile->n_sinks == 0)
> >> >> > continue;
> >> >> > + if (!profile || profile->priority < iter_profile->priority)
> >> >> > + profile = iter_profile;
> >> >> > }
> >> >> > + }
> >> >> >
> >> >> > - pa_log_debug("Setting card '%s' to profile '%s'", card->name, profile->name);
> >> >> > + if (!profile) {
> >> >> > + pa_log_warn("Could not find any suitable profile for card '%s'", card->name);
> >> >> > + return;
> >> >> > + }
> >> >> >
> >> >> > - if (pa_card_set_profile(card, profile, false) != 0) {
> >> >> > - pa_log_warn("Could not set profile '%s'", profile->name);
> >> >> > - continue;
> >> >> > - }
> >> >> > + old_profile_name = card->active_profile->name;
> >> >> > +
> >> >> > + pa_log_debug("Setting card '%s' from profile '%s' to profile '%s'", card->name, old_profile_name, profile->name);
> >> >> >
> >> >> > - /* When we are not in revert_to_a2dp phase flag this card for will_need_revert */
> >> >> > - if (!revert_to_a2dp)
> >> >> > - pa_hashmap_put(u->will_need_revert_card_map, card, PA_INT_TO_PTR(1));
> >> >> > + if (pa_card_set_profile(card, profile, false) != 0) {
> >> >> > + pa_log_warn("Could not set profile '%s'", profile->name);
> >> >> > + return;
> >> >> > + }
> >> >> >
> >> >> > - break;
> >> >> > + /* When not reverting, store data for future reverting */
> >> >> > + if (!revert_to_profile_name) {
> >> >> > + ps = pa_xnew0(struct profile_switch, 1);
> >> >> > + ps->from_profile = old_profile_name;
> >> >> > + ps->to_profile = profile->name;
> >> >> > + pa_hashmap_put(u->profile_switch_map, card, ps);
> >> >> > }
> >> >> > }
> >> >> >
> >> >> > /* Switch profile for one card */
> >> >> > -static void switch_profile(pa_card *card, bool revert_to_a2dp, void *userdata) {
> >> >> > +static void switch_profile(pa_card *card, bool revert, void *userdata) {
> >> >> > struct userdata *u = userdata;
> >> >> > + struct profile_switch *ps;
> >> >> > + const char *from_profile;
> >> >> > + const char *to_profile;
> >> >> > const char *s;
> >> >> >
> >> >> > /* Only consider bluetooth cards */
> >> >> > @@ -186,29 +205,25 @@ static void switch_profile(pa_card *card, bool revert_to_a2dp, void *userdata) {
> >> >> > if (!s || !pa_streq(s, "bluetooth"))
> >> >> > return;
> >> >> >
> >> >> > - if (revert_to_a2dp) {
> >> >> > - /* In revert_to_a2dp phase only consider cards with will_need_revert flag and remove it */
> >> >> > - if (!pa_hashmap_remove(u->will_need_revert_card_map, card))
> >> >> > + if (revert) {
> >> >> > + /* In revert phase only consider cards which switched profile */
> >> >> > + if (!(ps = pa_hashmap_remove(u->profile_switch_map, card)))
> >> >> > return;
> >> >> >
> >> >> > - /* Skip card if does not have active hsp profile */
> >> >> > - if (!pa_streq(card->active_profile->name, "headset_head_unit"))
> >> >> > - return;
> >> >> > + from_profile = ps->from_profile;
> >> >> > + to_profile = ps->to_profile;
> >> >> > + pa_xfree(ps);
> >> >> >
> >> >> > - /* Skip card if already has active a2dp profile */
> >> >> > - if (pa_startswith(card->active_profile->name, "a2dp_sink"))
> >> >> > + /* Skip card if does not have active profile to which was switched */
> >> >> > + if (!pa_streq(card->active_profile->name, to_profile))
> >> >> > return;
> >> >> > } else {
> >> >> > - /* Skip card if does not have active a2dp profile */
> >> >> > - if (!pa_startswith(card->active_profile->name, "a2dp_sink"))
> >> >> > - return;
> >> >> > -
> >> >> > - /* Skip card if already has active hsp profile */
> >> >> > - if (pa_streq(card->active_profile->name, "headset_head_unit"))
> >> >> > + /* Skip card if already has both sink and source */
> >> >> > + if (card->active_profile->n_sources > 0 && card->active_profile->n_sinks > 0)
> >> >> > return;
> >> >> > }
> >> >> >
> >> >> > - card_set_profile(u, card, revert_to_a2dp);
> >> >> > + card_set_profile(u, card, revert ? from_profile : NULL);
> >> >> > }
> >> >> >
> >> >> > /* Return true if we should ignore this source output */
> >> >> > @@ -254,15 +269,15 @@ static unsigned source_output_count(pa_core *c, void *userdata) {
> >> >> > }
> >> >> >
> >> >> > /* Switch profile for all cards */
> >> >> > -static void switch_profile_all(pa_idxset *cards, bool revert_to_a2dp, void *userdata) {
> >> >> > +static void switch_profile_all(pa_idxset *cards, bool revert, void *userdata) {
> >> >> > pa_card *card;
> >> >> > uint32_t idx;
> >> >> >
> >> >> > PA_IDXSET_FOREACH(card, cards, idx)
> >> >> > - switch_profile(card, revert_to_a2dp, userdata);
> >> >> > + switch_profile(card, revert, userdata);
> >> >> > }
> >> >> >
> >> >> > -/* When a source output is created, switch profile a2dp to profile hsp */
> >> >> > +/* When a source output is created, switch profile to some which has both sink and source */
> >> >> > static pa_hook_result_t source_output_put_hook_callback(pa_core *c, pa_source_output *source_output, void *userdata) {
> >> >> > pa_assert(c);
> >> >> > pa_assert(source_output);
> >> >> > @@ -274,7 +289,7 @@ static pa_hook_result_t source_output_put_hook_callback(pa_core *c, pa_source_ou
> >> >> > return PA_HOOK_OK;
> >> >> > }
> >> >> >
> >> >> > -/* When all source outputs are unlinked, switch profile hsp back back to profile a2dp */
> >> >> > +/* When all source outputs are unlinked, switch to previous profile */
> >> >> > static pa_hook_result_t source_output_unlink_hook_callback(pa_core *c, pa_source_output *source_output, void *userdata) {
> >> >> > pa_assert(c);
> >> >> > pa_assert(source_output);
> >> >> > @@ -291,30 +306,16 @@ static pa_hook_result_t source_output_unlink_hook_callback(pa_core *c, pa_source
> >> >> > }
> >> >> >
> >> >> > static pa_hook_result_t card_init_profile_hook_callback(pa_core *c, pa_card *card, void *userdata) {
> >> >> > - struct userdata *u = userdata;
> >> >> > - const char *s;
> >> >> > -
> >> >> > pa_assert(c);
> >> >> > pa_assert(card);
> >> >> >
> >> >> > + /* If there are not some source outputs do nothing */
> >> >> > if (source_output_count(c, userdata) == 0)
> >> >> > return PA_HOOK_OK;
> >> >> >
> >> >> > - /* Only consider bluetooth cards */
> >> >> > - s = pa_proplist_gets(card->proplist, PA_PROP_DEVICE_BUS);
> >> >> > - if (!s || !pa_streq(s, "bluetooth"))
> >> >> > - return PA_HOOK_OK;
> >> >> > -
> >> >> > - /* Ignore card if has already set other initial profile than a2dp */
> >> >> > - if (card->active_profile &&
> >> >> > - !pa_startswith(card->active_profile->name, "a2dp_sink"))
> >> >> > - return PA_HOOK_OK;
> >> >> > -
> >> >> > - /* Set initial profile to hsp */
> >> >> > - card_set_profile(u, card, false);
> >> >> > + /* Set initial profile to some with source */
> >> >> > + switch_profile(card, false, userdata);
> >> >> >
> >> >> > - /* Flag this card for will_need_revert */
> >> >> > - pa_hashmap_put(u->will_need_revert_card_map, card, PA_INT_TO_PTR(1));
> >> >> > return PA_HOOK_OK;
> >> >> > }
> >> >> >
> >> >> > @@ -447,7 +448,7 @@ int pa__init(pa_module *m) {
> >> >> > goto fail;
> >> >> > }
> >> >> >
> >> >> > - u->will_need_revert_card_map = pa_hashmap_new(pa_idxset_trivial_hash_func, pa_idxset_trivial_compare_func);
> >> >> > + u->profile_switch_map = pa_hashmap_new(pa_idxset_trivial_hash_func, pa_idxset_trivial_compare_func);
> >> >> >
> >> >> > u->source_put_slot = pa_hook_connect(&m->core->hooks[PA_CORE_HOOK_SOURCE_PUT], PA_HOOK_NORMAL,
> >> >> > (pa_hook_cb_t) source_put_hook_callback, u);
> >> >> > @@ -512,7 +513,7 @@ void pa__done(pa_module *m) {
> >> >> > if (u->profile_available_changed_slot)
> >> >> > pa_hook_slot_free(u->profile_available_changed_slot);
> >> >> >
> >> >> > - pa_hashmap_free(u->will_need_revert_card_map);
> >> >> > + pa_hashmap_free(u->profile_switch_map);
> >> >> >
> >> >> > pa_xfree(u);
> >> >> > }
> >> >> > --
> >> >> > 2.11.0
> >> >> >
> >> >> > _______________________________________________
> >> >> > pulseaudio-discuss mailing list
> >> >> > pulseaudio-discuss at lists.freedesktop.org
> >> >> > https://lists.freedesktop.org/mailman/listinfo/pulseaudio-discuss
> >> >> _______________________________________________
> >> >> pulseaudio-discuss mailing list
> >> >> pulseaudio-discuss at lists.freedesktop.org
> >> >> https://lists.freedesktop.org/mailman/listinfo/pulseaudio-discuss
> >> >
> >> > --
> >> > Pali Rohár
> >> > pali.rohar at gmail.com
> >
> > --
> > Pali Rohár
> > pali.rohar at gmail.com
--
Pali Rohár
pali.rohar at gmail.com
More information about the pulseaudio-discuss
mailing list