[pulseaudio-discuss] SBC XQ for PA 13.0
Hyperion
h1p8r10n at yandex.com
Thu Sep 19 08:15:28 UTC 2019
Negociation wth Divacore Addict headset, resulting in Dual Channel 2x47kb bitpool :
HCI sniffer - Bluetooth packet analyzer ver 5.50
device: hci0 snap_len: 1500 filter: 0x400
< AVDTP(s): Discover cmd: transaction 7 nsp 0x00
> AVDTP(s): Discover rsp: transaction 7 nsp 0x00
ACP SEID 1 - Audio Sink
ACP SEID 5 - Audio Sink
ACP SEID 3 - Audio Sink
ACP SEID 2 - Audio Sink
< AVDTP(s): Capabilities cmd: transaction 8 nsp 0x00
ACP SEID 1
> AVDTP(s): Capabilities rsp: transaction 8 nsp 0x00
Media Transport
Media Codec - SBC
16kHz 32kHz 44.1kHz 48kHz
Mono DualChannel Stereo JointStereo
4 8 12 16 Blocks
4 8 Subbands
SNR Loudness
Bitpool Range 2-53
Content Protection
02 00
< AVDTP(s): Capabilities cmd: transaction 9 nsp 0x00
ACP SEID 5
> AVDTP(s): Capabilities rsp: transaction 9 nsp 0x00
Media Transport
Media Codec - non-A2DP (aptX)
16kHz 32kHz 44.1kHz 48kHz
Stereo
< AVDTP(s): Capabilities cmd: transaction 10 nsp 0x00
ACP SEID 3
> AVDTP(s): Capabilities rsp: transaction 10 nsp 0x00
Media Transport
Media Codec - MPEG-2,4 AAC
MPEG-2 AAC LC MPEG-4 AAC LC
8kHz 11.025kHz 12kHz 16kHz 22.05kHz 24kHz 32kHz 44.1kHz 48kHz
1 2 Channels
320000bps VBR
Content Protection
02 00
< AVDTP(s): Capabilities cmd: transaction 11 nsp 0x00
ACP SEID 2
> AVDTP(s): Capabilities rsp: transaction 11 nsp 0x00
Media Transport
Media Codec - MPEG-1,2 Audio
Layers: 3
CRC Protection: Yes
Mono DualChannel Stereo JointStereo
Media Payload Format: RFC-2250
16kHz 22.05kHz 24kHz 32kHz 44.1kHz 48kHz
VBR: Yes
Bit Rate Indexes: n/a
Content Protection
02 00
< AVDTP(s): Set config cmd: transaction 12 nsp 0x00
ACP SEID 1 - INT SEID 2
Media Transport
Media Codec - SBC
44.1kHz
DualChannel
16 Blocks
8 Subbands
Loudness
Bitpool Range 2-47
19.09.2019, 10:13, "Hyperion" <h1p8r10n at yandex.com>:
> Negociation wth Harman Kardon Onyx, resulting in Dual Channel 2x47kb bitpool :
>
> device: hci0 snap_len: 1500 filter: 0x400
> < AVDTP(s): Discover cmd: transaction 15 nsp 0x00
>> AVDTP(s): Discover rsp: transaction 15 nsp 0x00
>
> ACP SEID 1 - Audio Sink
> ACP SEID 2 - Audio Sink
> ACP SEID 3 - Audio Sink
> < AVDTP(s): All Capabilities cmd: transaction 0 nsp 0x00
> ACP SEID 1
>> AVDTP(s): All Capabilities rsp: transaction 0 nsp 0x00
>
> Media Transport
> Reporting
> Media Codec - SBC
> 16kHz 32kHz 44.1kHz 48kHz
> Mono DualChannel Stereo JointStereo
> 4 8 12 16 Blocks
> 4 8 Subbands
> SNR Loudness
> Bitpool Range 2-89
> Content Protection
> 02 00
> Delay Reporting
> < AVDTP(s): All Capabilities cmd: transaction 1 nsp 0x00
> ACP SEID 2
>> AVDTP(s): All Capabilities rsp: transaction 1 nsp 0x00
>
> Media Transport
> Reporting
> Media Codec - SBC
> 16kHz 32kHz 44.1kHz 48kHz
> Mono DualChannel Stereo JointStereo
> 4 8 12 16 Blocks
> 4 8 Subbands
> SNR Loudness
> Bitpool Range 2-89
> Content Protection
> 02 00
> Delay Reporting
> < AVDTP(s): All Capabilities cmd: transaction 2 nsp 0x00
> ACP SEID 3
>> AVDTP(s): All Capabilities rsp: transaction 2 nsp 0x00
>
> Media Transport
> Reporting
> Media Codec - SBC
> 16kHz 32kHz 44.1kHz 48kHz
> Mono DualChannel Stereo JointStereo
> 4 8 12 16 Blocks
> 4 8 Subbands
> SNR Loudness
> Bitpool Range 2-89
> Content Protection
> 02 00
> Delay Reporting
> < AVDTP(s): Set config cmd: transaction 3 nsp 0x00
> ACP SEID 1 - INT SEID 2
> Media Transport
> Media Codec - SBC
> 44.1kHz
> DualChannel
> 16 Blocks
> 8 Subbands
> Loudness
> Bitpool Range 2-47
>
> 18.09.2019, 13:02, "Hyperion" <h1p8r10n at yandex.com>:
>> Patch V2 with added DUAL_CHANNEL as preferred mode.
>>
>> Works without any issue on more than 10 stereo and mono devices that I have here.
>>
>> http://download.zenwalk.org/x86_64/testing/pulseaudio-13.0-SBC-XQ_V2.patch
>>
>> /***
>> This file is part of PulseAudio.
>>
>> Copyright 2018-2019 Pali Rohár <pali.rohar at gmail.com>
>>
>> PulseAudio is free software; you can redistribute it and/or modify
>> it under the terms of the GNU Lesser General Public License as
>> published by the Free Software Foundation; either version 2.1 of the
>> License, or (at your option) any later version.
>>
>> PulseAudio is distributed in the hope that it will be useful, but
>> WITHOUT ANY WARRANTY; without even the implied warranty of
>> MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
>> General Public License for more details.
>>
>> You should have received a copy of the GNU Lesser General Public
>> License along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
>> ***/
>>
>> #ifdef HAVE_CONFIG_H
>> #include <config.h>
>> #endif
>>
>> #include <pulsecore/core-util.h>
>> #include <pulsecore/log.h>
>> #include <pulsecore/macro.h>
>> #include <pulsecore/once.h>
>> #include <pulse/sample.h>
>> #include <pulse/xmalloc.h>
>>
>> #include <arpa/inet.h>
>>
>> #include <sbc/sbc.h>
>>
>> #include "a2dp-codecs.h"
>> #include "a2dp-codec-api.h"
>> #include "rtp.h"
>>
>> #define SBC_BITPOOL_DEC_LIMIT 32
>> #define SBC_BITPOOL_DEC_STEP 5
>>
>> struct sbc_info {
>> sbc_t sbc; /* Codec data */
>> size_t codesize, frame_length; /* SBC Codesize, frame_length. We simply cache those values here */
>> uint16_t seq_num; /* Cumulative packet sequence */
>> uint8_t frequency;
>> uint8_t blocks;
>> uint8_t subbands;
>> uint8_t mode;
>> uint8_t allocation;
>> uint8_t initial_bitpool;
>> uint8_t min_bitpool;
>> uint8_t max_bitpool;
>> };
>>
>> static bool can_accept_capabilities(const uint8_t *capabilities_buffer, uint8_t capabilities_size, bool for_encoding) {
>> const a2dp_sbc_t *capabilities = (const a2dp_sbc_t *) capabilities_buffer;
>>
>> if (capabilities_size != sizeof(*capabilities))
>> return false;
>>
>> if (!(capabilities->frequency & (SBC_SAMPLING_FREQ_16000 | SBC_SAMPLING_FREQ_32000 | SBC_SAMPLING_FREQ_44100 | SBC_SAMPLING_FREQ_48000)))
>> return false;
>>
>> if (!(capabilities->channel_mode & (SBC_CHANNEL_MODE_MONO | SBC_CHANNEL_MODE_DUAL_CHANNEL | SBC_CHANNEL_MODE_STEREO | SBC_CHANNEL_MODE_JOINT_STEREO)))
>> return false;
>>
>> if (!(capabilities->allocation_method & (SBC_ALLOCATION_SNR | SBC_ALLOCATION_LOUDNESS)))
>> return false;
>>
>> if (!(capabilities->subbands & (SBC_SUBBANDS_4 | SBC_SUBBANDS_8)))
>> return false;
>>
>> if (!(capabilities->block_length & (SBC_BLOCK_LENGTH_4 | SBC_BLOCK_LENGTH_8 | SBC_BLOCK_LENGTH_12 | SBC_BLOCK_LENGTH_16)))
>> return false;
>>
>> return true;
>> }
>>
>> static const char *choose_remote_endpoint(const pa_hashmap *capabilities_hashmap, const pa_sample_spec *default_sample_spec, bool for_encoding) {
>> const pa_a2dp_codec_capabilities *a2dp_capabilities;
>> const char *key;
>> void *state;
>>
>> /* There is no preference, just choose random valid entry */
>> PA_HASHMAP_FOREACH_KV(key, a2dp_capabilities, capabilities_hashmap, state) {
>> if (can_accept_capabilities(a2dp_capabilities->buffer, a2dp_capabilities->size, for_encoding))
>> return key;
>> }
>>
>> return NULL;
>> }
>>
>> static uint8_t fill_capabilities(uint8_t capabilities_buffer[MAX_A2DP_CAPS_SIZE]) {
>> a2dp_sbc_t *capabilities = (a2dp_sbc_t *) capabilities_buffer;
>>
>> pa_zero(*capabilities);
>>
>> capabilities->channel_mode = SBC_CHANNEL_MODE_MONO | SBC_CHANNEL_MODE_DUAL_CHANNEL | SBC_CHANNEL_MODE_STEREO |
>> SBC_CHANNEL_MODE_JOINT_STEREO;
>> capabilities->frequency = SBC_SAMPLING_FREQ_16000 | SBC_SAMPLING_FREQ_32000 | SBC_SAMPLING_FREQ_44100 |
>> SBC_SAMPLING_FREQ_48000;
>> capabilities->allocation_method = SBC_ALLOCATION_SNR | SBC_ALLOCATION_LOUDNESS;
>> capabilities->subbands = SBC_SUBBANDS_4 | SBC_SUBBANDS_8;
>> capabilities->block_length = SBC_BLOCK_LENGTH_4 | SBC_BLOCK_LENGTH_8 | SBC_BLOCK_LENGTH_12 | SBC_BLOCK_LENGTH_16;
>> capabilities->min_bitpool = SBC_MIN_BITPOOL;
>> capabilities->max_bitpool = SBC_BITPOOL_HQ_JOINT_STEREO_44100;
>>
>> return sizeof(*capabilities);
>> }
>>
>> static bool is_configuration_valid(const uint8_t *config_buffer, uint8_t config_size) {
>> const a2dp_sbc_t *config = (const a2dp_sbc_t *) config_buffer;
>>
>> if (config_size != sizeof(*config)) {
>> pa_log_error("Invalid size of config buffer");
>> return false;
>> }
>>
>> if (config->frequency != SBC_SAMPLING_FREQ_16000 && config->frequency != SBC_SAMPLING_FREQ_32000 &&
>> config->frequency != SBC_SAMPLING_FREQ_44100 && config->frequency != SBC_SAMPLING_FREQ_48000) {
>> pa_log_error("Invalid sampling frequency in configuration");
>> return false;
>> }
>>
>> if (config->channel_mode != SBC_CHANNEL_MODE_MONO && config->channel_mode != SBC_CHANNEL_MODE_DUAL_CHANNEL &&
>> config->channel_mode != SBC_CHANNEL_MODE_STEREO && config->channel_mode != SBC_CHANNEL_MODE_JOINT_STEREO) {
>> pa_log_error("Invalid channel mode in configuration");
>> return false;
>> }
>>
>> if (config->allocation_method != SBC_ALLOCATION_SNR && config->allocation_method != SBC_ALLOCATION_LOUDNESS) {
>> pa_log_error("Invalid allocation method in configuration");
>> return false;
>> }
>>
>> if (config->subbands != SBC_SUBBANDS_4 && config->subbands != SBC_SUBBANDS_8) {
>> pa_log_error("Invalid SBC subbands in configuration");
>> return false;
>> }
>>
>> if (config->block_length != SBC_BLOCK_LENGTH_4 && config->block_length != SBC_BLOCK_LENGTH_8 &&
>> config->block_length != SBC_BLOCK_LENGTH_12 && config->block_length != SBC_BLOCK_LENGTH_16) {
>> pa_log_error("Invalid block length in configuration");
>> return false;
>> }
>>
>> if (config->min_bitpool > config->max_bitpool) {
>> pa_log_error("Invalid bitpool in configuration");
>> return false;
>> }
>>
>> return true;
>> }
>>
>> static uint8_t default_bitpool(uint8_t freq, uint8_t mode) {
>> /* These bitpool values were chosen based on the A2DP spec recommendation */
>> switch (freq) {
>> case SBC_SAMPLING_FREQ_48000:
>> switch (mode) {
>> case SBC_CHANNEL_MODE_MONO:
>> case SBC_CHANNEL_MODE_DUAL_CHANNEL:
>> return SBC_BITPOOL_HQ_MONO_48000;
>>
>> case SBC_CHANNEL_MODE_STEREO:
>> case SBC_CHANNEL_MODE_JOINT_STEREO:
>> return SBC_BITPOOL_HQ_JOINT_STEREO_48000;
>> }
>> break;
>> case SBC_SAMPLING_FREQ_44100:
>> switch (mode) {
>> case SBC_CHANNEL_MODE_MONO:
>> case SBC_CHANNEL_MODE_DUAL_CHANNEL:
>> return SBC_BITPOOL_HQ_MONO_44100;
>>
>> case SBC_CHANNEL_MODE_STEREO:
>> case SBC_CHANNEL_MODE_JOINT_STEREO:
>> return SBC_BITPOOL_HQ_JOINT_STEREO_44100;
>> }
>> break;
>> case SBC_SAMPLING_FREQ_16000:
>> case SBC_SAMPLING_FREQ_32000:
>> switch (mode) {
>> case SBC_CHANNEL_MODE_MONO:
>> case SBC_CHANNEL_MODE_DUAL_CHANNEL:
>> case SBC_CHANNEL_MODE_STEREO:
>> case SBC_CHANNEL_MODE_JOINT_STEREO:
>> return SBC_BITPOOL_HQ_JOINT_STEREO_44100;
>> }
>> break;
>> }
>>
>> pa_assert_not_reached();
>> }
>>
>> static uint8_t fill_preferred_configuration(const pa_sample_spec *default_sample_spec, const uint8_t *capabilities_buffer, uint8_t capabilities_size, uint8_t config_buffer[MAX_A2DP_CAPS_SIZE]) {
>> a2dp_sbc_t *config = (a2dp_sbc_t *) config_buffer;
>> const a2dp_sbc_t *capabilities = (const a2dp_sbc_t *) capabilities_buffer;
>> int i;
>>
>> static const struct {
>> uint32_t rate;
>> uint8_t cap;
>> } freq_table[] = {
>> { 16000U, SBC_SAMPLING_FREQ_16000 },
>> { 32000U, SBC_SAMPLING_FREQ_32000 },
>> { 44100U, SBC_SAMPLING_FREQ_44100 },
>> { 48000U, SBC_SAMPLING_FREQ_48000 }
>> };
>>
>> if (capabilities_size != sizeof(*capabilities)) {
>> pa_log_error("Invalid size of capabilities buffer");
>> return 0;
>> }
>>
>> pa_zero(*config);
>>
>> /* Find the lowest freq that is at least as high as the requested sampling rate */
>> for (i = 0; (unsigned) i < PA_ELEMENTSOF(freq_table); i++)
>> if (freq_table[i].rate >= default_sample_spec->rate && (capabilities->frequency & freq_table[i].cap)) {
>> config->frequency = freq_table[i].cap;
>> break;
>> }
>>
>> if ((unsigned) i == PA_ELEMENTSOF(freq_table)) {
>> for (--i; i >= 0; i--) {
>> if (capabilities->frequency & freq_table[i].cap) {
>> config->frequency = freq_table[i].cap;
>> break;
>> }
>> }
>>
>> if (i < 0) {
>> pa_log_error("Not suitable sample rate");
>> return 0;
>> }
>> }
>>
>> pa_assert((unsigned) i < PA_ELEMENTSOF(freq_table));
>>
>> if (default_sample_spec->channels <= 1) {
>> if (capabilities->channel_mode & SBC_CHANNEL_MODE_MONO)
>> config->channel_mode = SBC_CHANNEL_MODE_MONO;
>> else if (capabilities->channel_mode & SBC_CHANNEL_MODE_JOINT_STEREO)
>> config->channel_mode = SBC_CHANNEL_MODE_JOINT_STEREO;
>> else if (capabilities->channel_mode & SBC_CHANNEL_MODE_STEREO)
>> config->channel_mode = SBC_CHANNEL_MODE_STEREO;
>> else if (capabilities->channel_mode & SBC_CHANNEL_MODE_DUAL_CHANNEL)
>> config->channel_mode = SBC_CHANNEL_MODE_DUAL_CHANNEL;
>> else {
>> pa_log_error("No supported channel modes");
>> return 0;
>> }
>> } else {
>> if (capabilities->channel_mode & SBC_CHANNEL_MODE_DUAL_CHANNEL)
>> config->channel_mode = SBC_CHANNEL_MODE_DUAL_CHANNEL;
>> else if (capabilities->channel_mode & SBC_CHANNEL_MODE_STEREO)
>> config->channel_mode = SBC_CHANNEL_MODE_STEREO;
>> else if (capabilities->channel_mode & SBC_CHANNEL_MODE_JOINT_STEREO)
>> config->channel_mode = SBC_CHANNEL_MODE_JOINT_STEREO;
>> else if (capabilities->channel_mode & SBC_CHANNEL_MODE_MONO)
>> config->channel_mode = SBC_CHANNEL_MODE_MONO;
>> else {
>> pa_log_error("No supported channel modes");
>> return 0;
>> }
>> }
>>
>> if (capabilities->block_length & SBC_BLOCK_LENGTH_16)
>> config->block_length = SBC_BLOCK_LENGTH_16;
>> else if (capabilities->block_length & SBC_BLOCK_LENGTH_12)
>> config->block_length = SBC_BLOCK_LENGTH_12;
>> else if (capabilities->block_length & SBC_BLOCK_LENGTH_8)
>> config->block_length = SBC_BLOCK_LENGTH_8;
>> else if (capabilities->block_length & SBC_BLOCK_LENGTH_4)
>> config->block_length = SBC_BLOCK_LENGTH_4;
>> else {
>> pa_log_error("No supported block lengths");
>> return 0;
>> }
>>
>> if (capabilities->subbands & SBC_SUBBANDS_8)
>> config->subbands = SBC_SUBBANDS_8;
>> else if (capabilities->subbands & SBC_SUBBANDS_4)
>> config->subbands = SBC_SUBBANDS_4;
>> else {
>> pa_log_error("No supported subbands");
>> return 0;
>> }
>>
>> if (capabilities->allocation_method & SBC_ALLOCATION_LOUDNESS)
>> config->allocation_method = SBC_ALLOCATION_LOUDNESS;
>> else if (capabilities->allocation_method & SBC_ALLOCATION_SNR)
>> config->allocation_method = SBC_ALLOCATION_SNR;
>> else {
>> pa_log_error("No supported allocation method");
>> return 0;
>> }
>>
>> config->min_bitpool = (uint8_t) PA_MAX(SBC_MIN_BITPOOL, capabilities->min_bitpool);
>> config->max_bitpool = (uint8_t) PA_MIN(default_bitpool(config->frequency, config->channel_mode), capabilities->max_bitpool);
>>
>> if (config->min_bitpool > config->max_bitpool) {
>> pa_log_error("No supported bitpool");
>> return 0;
>> }
>>
>> return sizeof(*config);
>> }
>>
>> static void set_params(struct sbc_info *sbc_info) {
>> sbc_info->sbc.frequency = sbc_info->frequency;
>> sbc_info->sbc.blocks = sbc_info->blocks;
>> sbc_info->sbc.subbands = sbc_info->subbands;
>> sbc_info->sbc.mode = sbc_info->mode;
>> sbc_info->sbc.allocation = sbc_info->allocation;
>> sbc_info->sbc.bitpool = sbc_info->initial_bitpool;
>> sbc_info->sbc.endian = SBC_LE;
>>
>> sbc_info->codesize = sbc_get_codesize(&sbc_info->sbc);
>> sbc_info->frame_length = sbc_get_frame_length(&sbc_info->sbc);
>> }
>>
>> static void *init(bool for_encoding, bool for_backchannel, const uint8_t *config_buffer, uint8_t config_size, pa_sample_spec *sample_spec) {
>> struct sbc_info *sbc_info;
>> const a2dp_sbc_t *config = (const a2dp_sbc_t *) config_buffer;
>> int ret;
>>
>> pa_assert(config_size == sizeof(*config));
>> pa_assert(!for_backchannel);
>>
>> sbc_info = pa_xnew0(struct sbc_info, 1);
>>
>> ret = sbc_init(&sbc_info->sbc, 0);
>> if (ret != 0) {
>> pa_xfree(sbc_info);
>> pa_log_error("SBC initialization failed: %d", ret);
>> return NULL;
>> }
>>
>> sample_spec->format = PA_SAMPLE_S16LE;
>>
>> switch (config->frequency) {
>> case SBC_SAMPLING_FREQ_48000:
>> sbc_info->frequency = SBC_FREQ_48000;
>> sample_spec->rate = 48000U;
>> break;
>> case SBC_SAMPLING_FREQ_44100:
>> sbc_info->frequency = SBC_FREQ_44100;
>> sample_spec->rate = 44100U;
>> break;
>> case SBC_SAMPLING_FREQ_32000:
>> sbc_info->frequency = SBC_FREQ_32000;
>> sample_spec->rate = 32000U;
>> break;
>> case SBC_SAMPLING_FREQ_16000:
>> sbc_info->frequency = SBC_FREQ_16000;
>> sample_spec->rate = 16000U;
>> break;
>> default:
>> pa_assert_not_reached();
>> }
>>
>> switch (config->channel_mode) {
>> case SBC_CHANNEL_MODE_DUAL_CHANNEL:
>> sbc_info->mode = SBC_MODE_DUAL_CHANNEL;
>> sample_spec->channels = 2;
>> break;
>> case SBC_CHANNEL_MODE_STEREO:
>> sbc_info->mode = SBC_MODE_STEREO;
>> sample_spec->channels = 2;
>> break;
>> case SBC_CHANNEL_MODE_JOINT_STEREO:
>> sbc_info->mode = SBC_MODE_JOINT_STEREO;
>> sample_spec->channels = 2;
>> break;
>> case SBC_CHANNEL_MODE_MONO:
>> sbc_info->mode = SBC_MODE_MONO;
>> sample_spec->channels = 1;
>> break;
>> default:
>> pa_assert_not_reached();
>> }
>>
>> switch (config->allocation_method) {
>> case SBC_ALLOCATION_LOUDNESS:
>> sbc_info->allocation = SBC_AM_LOUDNESS;
>> break;
>> case SBC_ALLOCATION_SNR:
>> sbc_info->allocation = SBC_AM_SNR;
>> break;
>> default:
>> pa_assert_not_reached();
>> }
>>
>> switch (config->subbands) {
>> case SBC_SUBBANDS_4:
>> sbc_info->subbands = SBC_SB_4;
>> break;
>> case SBC_SUBBANDS_8:
>> sbc_info->subbands = SBC_SB_8;
>> break;
>> default:
>> pa_assert_not_reached();
>> }
>>
>> switch (config->block_length) {
>> case SBC_BLOCK_LENGTH_4:
>> sbc_info->blocks = SBC_BLK_4;
>> break;
>> case SBC_BLOCK_LENGTH_8:
>> sbc_info->blocks = SBC_BLK_8;
>> break;
>> case SBC_BLOCK_LENGTH_12:
>> sbc_info->blocks = SBC_BLK_12;
>> break;
>> case SBC_BLOCK_LENGTH_16:
>> sbc_info->blocks = SBC_BLK_16;
>> break;
>> default:
>> pa_assert_not_reached();
>> }
>>
>> sbc_info->min_bitpool = config->min_bitpool;
>> sbc_info->max_bitpool = config->max_bitpool;
>>
>> /* Set minimum bitpool for source to get the maximum possible block_size
>> * in get_block_size() function. This block_size is length of buffer used
>> * for decoded audio data and so is inversely proportional to frame length
>> * which depends on bitpool value. Bitpool is controlled by other side from
>> * range [min_bitpool, max_bitpool]. */
>> sbc_info->initial_bitpool = for_encoding ? sbc_info->max_bitpool : sbc_info->min_bitpool;
>>
>> set_params(sbc_info);
>>
>> pa_log_info("SBC parameters: allocation=%s, subbands=%u, blocks=%u, mode=%s bitpool=%u codesize=%u frame_length=%u",
>> sbc_info->sbc.allocation ? "SNR" : "Loudness", sbc_info->sbc.subbands ? 8 : 4,
>> (sbc_info->sbc.blocks+1)*4, sbc_info->sbc.mode == SBC_MODE_MONO ? "Mono" :
>> sbc_info->sbc.mode == SBC_MODE_DUAL_CHANNEL ? "DualChannel" :
>> sbc_info->sbc.mode == SBC_MODE_STEREO ? "Stereo" : "JointStereo",
>> sbc_info->sbc.bitpool, (unsigned)sbc_info->codesize, (unsigned)sbc_info->frame_length);
>>
>> return sbc_info;
>> }
>>
>> static void deinit(void *codec_info) {
>> struct sbc_info *sbc_info = (struct sbc_info *) codec_info;
>>
>> sbc_finish(&sbc_info->sbc);
>> pa_xfree(sbc_info);
>> }
>>
>> static void set_bitpool(struct sbc_info *sbc_info, uint8_t bitpool) {
>> if (bitpool > sbc_info->max_bitpool)
>> bitpool = sbc_info->max_bitpool;
>> else if (bitpool < sbc_info->min_bitpool)
>> bitpool = sbc_info->min_bitpool;
>>
>> sbc_info->sbc.bitpool = bitpool;
>>
>> sbc_info->codesize = sbc_get_codesize(&sbc_info->sbc);
>> sbc_info->frame_length = sbc_get_frame_length(&sbc_info->sbc);
>>
>> pa_log_debug("Bitpool has changed to %u", sbc_info->sbc.bitpool);
>> }
>>
>> static int reset(void *codec_info) {
>> struct sbc_info *sbc_info = (struct sbc_info *) codec_info;
>> int ret;
>>
>> ret = sbc_reinit(&sbc_info->sbc, 0);
>> if (ret != 0) {
>> pa_log_error("SBC reinitialization failed: %d", ret);
>> return -1;
>> }
>>
>> /* sbc_reinit() sets also default parameters, so reset them back */
>> set_params(sbc_info);
>>
>> sbc_info->seq_num = 0;
>> return 0;
>> }
>>
>> static size_t get_block_size(void *codec_info, size_t link_mtu) {
>> struct sbc_info *sbc_info = (struct sbc_info *) codec_info;
>> size_t rtp_size = sizeof(struct rtp_header) + sizeof(struct rtp_sbc_payload);
>> size_t frame_count = (link_mtu - rtp_size) / sbc_info->frame_length;
>>
>> /* frame_count is only 4 bit number */
>> if (frame_count > 15)
>> frame_count = 15;
>>
>> return frame_count * sbc_info->codesize;
>> }
>>
>> static size_t reduce_encoder_bitrate(void *codec_info, size_t write_link_mtu) {
>> struct sbc_info *sbc_info = (struct sbc_info *) codec_info;
>> uint8_t bitpool;
>>
>> /* Check if bitpool is already at its limit */
>> if (sbc_info->sbc.bitpool <= SBC_BITPOOL_DEC_LIMIT)
>> return 0;
>>
>> bitpool = sbc_info->sbc.bitpool - SBC_BITPOOL_DEC_STEP;
>>
>> if (bitpool < SBC_BITPOOL_DEC_LIMIT)
>> bitpool = SBC_BITPOOL_DEC_LIMIT;
>>
>> if (sbc_info->sbc.bitpool == bitpool)
>> return 0;
>>
>> set_bitpool(sbc_info, bitpool);
>> return get_block_size(codec_info, write_link_mtu);
>> }
>>
>> static size_t encode_buffer(void *codec_info, uint32_t timestamp, const uint8_t *input_buffer, size_t input_size, uint8_t *output_buffer, size_t output_size, size_t *processed) {
>> struct sbc_info *sbc_info = (struct sbc_info *) codec_info;
>> struct rtp_header *header;
>> struct rtp_sbc_payload *payload;
>> uint8_t *d;
>> const uint8_t *p;
>> size_t to_write, to_encode;
>> uint8_t frame_count;
>>
>> header = (struct rtp_header*) output_buffer;
>> payload = (struct rtp_sbc_payload*) (output_buffer + sizeof(*header));
>>
>> frame_count = 0;
>>
>> p = input_buffer;
>> to_encode = input_size;
>>
>> d = output_buffer + sizeof(*header) + sizeof(*payload);
>> to_write = output_size - sizeof(*header) - sizeof(*payload);
>>
>> /* frame_count is only 4 bit number */
>> while (PA_LIKELY(to_encode > 0 && to_write > 0 && frame_count < 15)) {
>> ssize_t written;
>> ssize_t encoded;
>>
>> encoded = sbc_encode(&sbc_info->sbc,
>> p, to_encode,
>> d, to_write,
>> &written);
>>
>> if (PA_UNLIKELY(encoded <= 0)) {
>> pa_log_error("SBC encoding error (%li)", (long) encoded);
>> break;
>> }
>>
>> if (PA_UNLIKELY(written < 0)) {
>> pa_log_error("SBC encoding error (%li)", (long) written);
>> break;
>> }
>>
>> pa_assert_fp((size_t) encoded <= to_encode);
>> pa_assert_fp((size_t) encoded == sbc_info->codesize);
>>
>> pa_assert_fp((size_t) written <= to_write);
>> pa_assert_fp((size_t) written == sbc_info->frame_length);
>>
>> p += encoded;
>> to_encode -= encoded;
>>
>> d += written;
>> to_write -= written;
>>
>> frame_count++;
>> }
>>
>> PA_ONCE_BEGIN {
>> pa_log_debug("Using SBC codec implementation: %s", pa_strnull(sbc_get_implementation_info(&sbc_info->sbc)));
>> } PA_ONCE_END;
>>
>> if (PA_UNLIKELY(frame_count == 0)) {
>> *processed = 0;
>> return 0;
>> }
>>
>> /* write it to the fifo */
>> pa_memzero(output_buffer, sizeof(*header) + sizeof(*payload));
>> header->v = 2;
>>
>> /* A2DP spec: "A payload type in the RTP dynamic range shall be chosen".
>> * RFC3551 defines the dynamic range to span from 96 to 127, and 96 appears
>> * to be the most common choice in A2DP implementations. */
>> header->pt = 96;
>>
>> header->sequence_number = htons(sbc_info->seq_num++);
>> header->timestamp = htonl(timestamp);
>> header->ssrc = htonl(1);
>> payload->frame_count = frame_count;
>>
>> *processed = p - input_buffer;
>> return d - output_buffer;
>> }
>>
>> static size_t decode_buffer(void *codec_info, const uint8_t *input_buffer, size_t input_size, uint8_t *output_buffer, size_t output_size, size_t *processed) {
>> struct sbc_info *sbc_info = (struct sbc_info *) codec_info;
>>
>> struct rtp_header *header;
>> struct rtp_sbc_payload *payload;
>> const uint8_t *p;
>> uint8_t *d;
>> size_t to_write, to_decode;
>> uint8_t frame_count;
>>
>> header = (struct rtp_header *) input_buffer;
>> payload = (struct rtp_sbc_payload*) (input_buffer + sizeof(*header));
>>
>> frame_count = payload->frame_count;
>>
>> /* TODO: Add support for decoding fragmented SBC frames */
>> if (payload->is_fragmented) {
>> pa_log_error("Unsupported fragmented SBC frame");
>> *processed = 0;
>> return 0;
>> }
>>
>> p = input_buffer + sizeof(*header) + sizeof(*payload);
>> to_decode = input_size - sizeof(*header) - sizeof(*payload);
>>
>> d = output_buffer;
>> to_write = output_size;
>>
>> while (PA_LIKELY(to_decode > 0 && to_write > 0 && frame_count > 0)) {
>> size_t written;
>> ssize_t decoded;
>>
>> decoded = sbc_decode(&sbc_info->sbc,
>> p, to_decode,
>> d, to_write,
>> &written);
>>
>> if (PA_UNLIKELY(decoded <= 0)) {
>> pa_log_error("SBC decoding error (%li)", (long) decoded);
>> break;
>> }
>>
>> /* Reset frame length, it can be changed due to bitpool change */
>> sbc_info->frame_length = sbc_get_frame_length(&sbc_info->sbc);
>>
>> pa_assert_fp((size_t) decoded <= to_decode);
>> pa_assert_fp((size_t) decoded == sbc_info->frame_length);
>>
>> pa_assert_fp((size_t) written <= to_write);
>> pa_assert_fp((size_t) written == sbc_info->codesize);
>>
>> p += decoded;
>> to_decode -= decoded;
>>
>> d += written;
>> to_write -= written;
>>
>> frame_count--;
>> }
>>
>> *processed = p - input_buffer;
>> return d - output_buffer;
>> }
>>
>> const pa_a2dp_codec pa_a2dp_codec_sbc = {
>> .name = "sbc",
>> .description = "SBC",
>> .id = { A2DP_CODEC_SBC, 0, 0 },
>> .support_backchannel = false,
>> .can_accept_capabilities = can_accept_capabilities,
>> .choose_remote_endpoint = choose_remote_endpoint,
>> .fill_capabilities = fill_capabilities,
>> .is_configuration_valid = is_configuration_valid,
>> .fill_preferred_configuration = fill_preferred_configuration,
>> .init = init,
>> .deinit = deinit,
>> .reset = reset,
>> .get_read_block_size = get_block_size,
>> .get_write_block_size = get_block_size,
>> .reduce_encoder_bitrate = reduce_encoder_bitrate,
>> .encode_buffer = encode_buffer,
>> .decode_buffer = decode_buffer,
>> };
>>
>> 17.09.2019, 09:34, "Hyperion" <h1p8r10n at yandex.com>:
>>> btw here's the updated V12-12 patch in Pali's latest rel95 patchset that applies to PA 13.0.
>>>
>>> http://download.zenwalk.org/x86_64/testing/v12-12-13-zen-bluetooth-Implement-A2DP-codec-switching-and-backchannel-support-.patch
>>>
>>> JP
>>>
>>> 16.09.2019, 09:32, "Hyperion" <h1p8r10n at yandex.com>:
>>>> Hi,
>>>>
>>>> Following what has already be done in some Android derivatives, here's a simple patch that extend SBP bitpool negociation to XQ quality.
>>>>
>>>> According to :
>>>> --> http://soundexpert.org/articles/-/blogs/audio-quality-of-sbc-xq-bluetooth-audio-codec
>>>> --> https://lineageos.org/engineering/Bluetooth-SBC-XQ/ ,
>>>> --> and confirmed by my own experimentation on more than 10 different devices,
>>>>
>>>> here are the features of the (very simple and non intrusive) patch :
>>>> - allow to use bitpool 76 on devices that support it, aka SBC XQ
>>>> - harmless for devices limited to bitpool 53
>>>> - deprecates the need for APTX & APTX HD support, which are not better than SBC XQ, are not Open Source, and less supported by devices
>>>>
>>>> This patch will be superseded by multi-profiles Pali Rohar A2DP stack implementation, when it's ready for production. Thanks to Pali for the help testing many codec parameters.
>>>>
>>>> Let me know if I have to clone the git to push my patch, or if a regular PA dev could do it.
>>>>
>>>> All the best
>>>> JP
>>>>
>>>> diff -rNaud pulseaudio-13.0/src/modules/bluetooth/a2dp-codec-sbc.c pulseaudio-13.0-new/src/modules/bluetooth/a2dp-codec-sbc.c
>>>> --- pulseaudio-13.0/src/modules/bluetooth/a2dp-codec-sbc.c 2019-09-13 15:20:03.000000000 +0200
>>>> +++ pulseaudio-13.0-new/src/modules/bluetooth/a2dp-codec-sbc.c 2019-09-16 08:57:50.363122019 +0200
>>>> @@ -290,10 +290,10 @@
>>>> return 0;
>>>> }
>>>>
>>>> - if (capabilities->allocation_method & SBC_ALLOCATION_LOUDNESS)
>>>> - config->allocation_method = SBC_ALLOCATION_LOUDNESS;
>>>> - else if (capabilities->allocation_method & SBC_ALLOCATION_SNR)
>>>> + if (capabilities->allocation_method & SBC_ALLOCATION_SNR)
>>>> config->allocation_method = SBC_ALLOCATION_SNR;
>>>> + else if (capabilities->allocation_method & SBC_ALLOCATION_LOUDNESS)
>>>> + config->allocation_method = SBC_ALLOCATION_LOUDNESS;
>>>> else {
>>>> pa_log_error("No supported allocation method");
>>>> return 0;
>>>> diff -rNaud pulseaudio-13.0/src/modules/bluetooth/a2dp-codecs.h pulseaudio-13.0-new/src/modules/bluetooth/a2dp-codecs.h
>>>> --- pulseaudio-13.0/src/modules/bluetooth/a2dp-codecs.h 2019-09-13 15:20:03.000000000 +0200
>>>> +++ pulseaudio-13.0-new/src/modules/bluetooth/a2dp-codecs.h 2019-09-16 08:44:20.382086305 +0200
>>>> @@ -61,14 +61,11 @@
>>>> * Allocation method = Loudness
>>>> * Subbands = 8
>>>> */
>>>> -#define SBC_BITPOOL_MQ_MONO_44100 19
>>>> -#define SBC_BITPOOL_MQ_MONO_48000 18
>>>> -#define SBC_BITPOOL_MQ_JOINT_STEREO_44100 35
>>>> -#define SBC_BITPOOL_MQ_JOINT_STEREO_48000 33
>>>> -#define SBC_BITPOOL_HQ_MONO_44100 31
>>>> -#define SBC_BITPOOL_HQ_MONO_48000 29
>>>> -#define SBC_BITPOOL_HQ_JOINT_STEREO_44100 53
>>>> -#define SBC_BITPOOL_HQ_JOINT_STEREO_48000 51
>>>> +
>>>> +#define SBC_BITPOOL_HQ_MONO_44100 38
>>>> +#define SBC_BITPOOL_HQ_MONO_48000 38
>>>> +#define SBC_BITPOOL_HQ_JOINT_STEREO_44100 76
>>>> +#define SBC_BITPOOL_HQ_JOINT_STEREO_48000 76
>>>>
>>>> #define MPEG_CHANNEL_MODE_MONO (1 << 3)
>>>> #define MPEG_CHANNEL_MODE_DUAL_CHANNEL (1 << 2)
>>>>
>>>> _______________________________________________
>>>> pulseaudio-discuss mailing list
>>>> pulseaudio-discuss at lists.freedesktop.org
>>>> https://lists.freedesktop.org/mailman/listinfo/pulseaudio-discuss
>
> _______________________________________________
> pulseaudio-discuss mailing list
> pulseaudio-discuss at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/pulseaudio-discuss
More information about the pulseaudio-discuss
mailing list