<div>A bit of clarification on my question, hitting Send button too early ...<br></div><div><br></div><div>I would like to pipe Line-In data stream on Linux Box 2 to its Microphone input, so that I could use PyAudio to stream from there. Unfortunately I cannot do so because Linux Box 1 might not be accessible, only via its 3.5mm Output port.<br></div><div><br></div><div>Many thanks.<br></div><div><br></div><div>‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐<br></div><div> On Wednesday, May 26, 2021 1:26 AM, sdkjka22jhd <sdkjka22jhd@protonmail.com> wrote:<br></div><div> <br></div><blockquote class="protonmail_quote" type="cite"><div>Hello PulseAudio gurus,<br></div><div><br></div><div>I could use a male-to-male 3.5mm cable, connecting Linux box #1's 3.5mm Output port to Linux box #2's Line-In 3.5mm port. And then play audio on box 1 and hear the speakers playing sound on box 2. I used this : <a href="https://askubuntu.com/a/267347">https://askubuntu.com/a/267347</a>. Practically using module-loopback. This works all good.<br></div><div><br></div><div>My software is using PyAudio to read from Microphone input and pipe/yield the recorded audio stream to the internet : <a href="https://people.csail.mit.edu/hubert/pyaudio/#record-example">https://people.csail.mit.edu/hubert/pyaudio/#record-example</a><br></div><div><br></div><div>My question is, is it possible to use PulseAudio to pipe/forward Line-In stream to Microphone stream ?<br></div><div><br></div><div>Many thanks.<br></div><div><br></div></blockquote><div><br></div>