<div dir="ltr"><div>x</div><div style="margin-left:40px">Can you post the output of this command while the card is plugged in?</div><div>x</div><div>OK, here it is:</div><div>===</div><div>Card #0 Name: alsa_card.pci-0000_02_00.1 Driver: module-alsa-card.c Owner Module: 6 Properties: alsa.card = "2" alsa.card_name = "HDA ATI HDMI" alsa.long_card_name = "HDA ATI HDMI at 0xfbafc000 irq 39" alsa.driver_name = "snd_hda_intel" device.bus_path = "pci-0000:02:00.1" sysfs.path = "/devices/pci0000:00/0000:00:03.0/0000:02:00.1/sound/card2" device.bus = "pci" <a href="http://device.vendor.id">device.vendor.id</a> = "1002" <a href="http://device.vendor.name">device.vendor.name</a> = "Advanced Micro Devices, Inc. [AMD/ATI]" <a href="http://device.product.id">device.product.id</a> = "aa50" <a href="http://device.product.name">device.product.name</a> = "Cypress HDMI Audio [Radeon HD 5830/5850/5870 / 6850/6870 Rebrand]" device.string = "2" device.description = "Cypress HDMI Audio [Radeon HD 5830/5850/5870 / 6850/6870 Rebrand]" module-udev-detect.discovered = "1" device.icon_name = "audio-card-pci" Profiles: output:hdmi-stereo: Digital Stereo (HDMI) Output (sinks: 1, sources: 0, priority: 5900, available: no) output:hdmi-surround: Digital Surround 5.1 (HDMI) Output (sinks: 1, sources: 0, priority: 800, available: no) output:hdmi-surround71: Digital Surround 7.1 (HDMI) Output (sinks: 1, sources: 0, priority: 800, available: no) off: Off (sinks: 0, sources: 0, priority: 0, available: yes) Active Profile: off Ports: hdmi-output-0: HDMI / DisplayPort (type: HDMI, priority: 5900, latency offset: 0 usec, not available) Properties: device.icon_name = "video-display" Part of profile(s): output:hdmi-stereo, output:hdmi-surround, output:hdmi-surround71 Card #2 Name: alsa_card.pci-0000_00_1b.0 Driver: module-alsa-card.c Owner Module: 8 Properties: alsa.card = "0" alsa.card_name = "HDA Intel" alsa.long_card_name = "HDA Intel at 0xfb9f8000 irq 37" alsa.driver_name = "snd_hda_intel" device.bus_path = "pci-0000:00:1b.0" sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0" device.bus = "pci" <a href="http://device.vendor.id">device.vendor.id</a> = "8086" <a href="http://device.vendor.name">device.vendor.name</a> = "Intel Corporation" <a href="http://device.product.id">device.product.id</a> = "3a3e" <a href="http://device.product.name">device.product.name</a> = "82801JI (ICH10 Family) HD Audio Controller" device.form_factor = "internal" device.string = "0" device.description = "Built-in Audio" module-udev-detect.discovered = "1" device.icon_name = "audio-card-pci" Profiles: input:analog-stereo: Analog Stereo Input (sinks: 0, sources: 1, priority: 65, available: yes) output:analog-stereo: Analog Stereo Output (sinks: 1, sources: 0, priority: 6500, available: no) output:analog-stereo+input:analog-stereo: Analog Stereo Duplex (sinks: 1, sources: 1, priority: 6565, available: no) output:analog-surround-21: Analog Surround 2.1 Output (sinks: 1, sources: 0, priority: 1300, available: no) output:analog-surround-21+input:analog-stereo: Analog Surround 2.1 Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 1365, available: no) output:analog-surround-40: Analog Surround 4.0 Output (sinks: 1, sources: 0, priority: 1200, available: no) output:analog-surround-40+input:analog-stereo: Analog Surround 4.0 Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 1265, available: no) output:analog-surround-41: Analog Surround 4.1 Output (sinks: 1, sources: 0, priority: 1300, available: no) output:analog-surround-41+input:analog-stereo: Analog Surround 4.1 Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 1365, available: no) output:analog-surround-50: Analog Surround 5.0 Output (sinks: 1, sources: 0, priority: 1200, available: no) output:analog-surround-50+input:analog-stereo: Analog Surround 5.0 Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 1265, available: no) output:analog-surround-51: Analog Surround 5.1 Output (sinks: 1, sources: 0, priority: 1300, available: no) output:analog-surround-51+input:analog-stereo: Analog Surround 5.1 Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 1365, available: no) output:analog-surround-71: Analog Surround 7.1 Output (sinks: 1, sources: 0, priority: 1200, available: no) output:analog-surround-71+input:analog-stereo: Analog Surround 7.1 Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 1265, available: no) output:iec958-stereo: Digital Stereo (IEC958) Output (sinks: 1, sources: 0, priority: 5500, available: yes) output:iec958-stereo+input:analog-stereo: Digital Stereo (IEC958) Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 5565, available: yes) output:iec958-ac3-surround-51: Digital Surround 5.1 (IEC958/AC3) Output (sinks: 1, sources: 0, priority: 300, available: yes) output:iec958-ac3-surround-51+input:analog-stereo: Digital Surround 5.1 (IEC958/AC3) Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 365, available: yes) off: Off (sinks: 0, sources: 0, priority: 0, available: yes) Active Profile: output:iec958-stereo+input:analog-stereo Ports: analog-input-front-mic: Front Microphone (type: Mic, priority: 8500, latency offset: 0 usec, not available) Properties: device.icon_name = "audio-input-microphone" Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:analog-surround-21+input:analog-stereo, output:analog-surround-40+input:analog-stereo, output:analog-surround-41+input:analog-stereo, output:analog-surround-50+input:analog-stereo, output:analog-surround-51+input:analog-stereo, output:analog-surround-71+input:analog-stereo, output:iec958-stereo+input:analog-stereo, output:iec958-ac3-surround-51+input:analog-stereo analog-input-rear-mic: Rear Microphone (type: Mic, priority: 8200, latency offset: 0 usec, not available) Properties: device.icon_name = "audio-input-microphone" Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:analog-surround-21+input:analog-stereo, output:analog-surround-40+input:analog-stereo, output:analog-surround-41+input:analog-stereo, output:analog-surround-50+input:analog-stereo, output:analog-surround-51+input:analog-stereo, output:analog-surround-71+input:analog-stereo, output:iec958-stereo+input:analog-stereo, output:iec958-ac3-surround-51+input:analog-stereo analog-input-linein: Line In (type: Line, priority: 8100, latency offset: 0 usec, available) Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:analog-surround-21+input:analog-stereo, output:analog-surround-40+input:analog-stereo, output:analog-surround-41+input:analog-stereo, output:analog-surround-50+input:analog-stereo, output:analog-surround-51+input:analog-stereo, output:analog-surround-71+input:analog-stereo, output:iec958-stereo+input:analog-stereo, output:iec958-ac3-surround-51+input:analog-stereo analog-output-lineout: Line Out (type: Line, priority: 9000, latency offset: 0 usec, not available) Part of profile(s): output:analog-stereo, output:analog-stereo+input:analog-stereo, output:analog-surround-21, output:analog-surround-21+input:analog-stereo, output:analog-surround-40, output:analog-surround-40+input:analog-stereo, output:analog-surround-41, output:analog-surround-41+input:analog-stereo, output:analog-surround-50, output:analog-surround-50+input:analog-stereo, output:analog-surround-51, output:analog-surround-51+input:analog-stereo, output:analog-surround-71, output:analog-surround-71+input:analog-stereo analog-output-headphones: Headphones (type: Headphones, priority: 9900, latency offset: 0 usec, not available) Properties: device.icon_name = "audio-headphones" Part of profile(s): output:analog-stereo, output:analog-stereo+input:analog-stereo iec958-stereo-output: Digital Output (S/PDIF) (type: SPDIF, priority: 0, latency offset: 0 usec, availability unknown) Part of profile(s): output:iec958-stereo, output:iec958-stereo+input:analog-stereo Card #3 Name: alsa_card.usb-C-Media_Electronics_Inc._USB_Audio_Device-00 Driver: module-alsa-card.c Owner Module: 27 Properties: alsa.card = "1" alsa.card_name = "USB Audio Device" alsa.long_card_name = "C-Media Electronics Inc. USB Audio Device at usb-0000:00:1a.0-2, full speed" alsa.driver_name = "snd_usb_audio" device.bus_path = "pci-0000:00:1a.0-usb-0:2:1.0" sysfs.path = "/devices/pci0000:00/0000:00:1a.0/usb2/2-2/2-2:1.0/sound/card1" <a href="http://udev.id">udev.id</a> = "usb-C-Media_Electronics_Inc._USB_Audio_Device-00" device.bus = "usb" <a href="http://device.vendor.id">device.vendor.id</a> = "0d8c" <a href="http://device.vendor.name">device.vendor.name</a> = "C-Media Electronics, Inc." <a href="http://device.product.id">device.product.id</a> = "0014" <a href="http://device.product.name">device.product.name</a> = "Audio Adapter (Unitek Y-247A)" device.serial = "C-Media_Electronics_Inc._USB_Audio_Device" device.string = "1" device.description = "Audio Adapter (Unitek Y-247A)" module-udev-detect.discovered = "1" device.icon_name = "audio-card-usb" Profiles: input:mono-fallback: Mono Input (sinks: 0, sources: 1, priority: 1, available: yes) input:multichannel-input: Multichannel Input (sinks: 0, sources: 1, priority: 1, available: yes) output:analog-stereo: Analog Stereo Output (sinks: 1, sources: 0, priority: 6500, available: yes) output:analog-stereo+input:mono-fallback: Analog Stereo Output + Mono Input (sinks: 1, sources: 1, priority: 6501, available: yes) output:analog-stereo+input:multichannel-input: Analog Stereo Output + Multichannel Input (sinks: 1, sources: 1, priority: 6501, available: yes) output:iec958-stereo: Digital Stereo (IEC958) Output (sinks: 1, sources: 0, priority: 5500, available: yes) output:iec958-stereo+input:mono-fallback: Digital Stereo (IEC958) Output + Mono Input (sinks: 1, sources: 1, priority: 5501, available: yes) output:iec958-stereo+input:multichannel-input: Digital Stereo (IEC958) Output + Multichannel Input (sinks: 1, sources: 1, priority: 5501, available: yes) output:iec958-ac3-surround-51: Digital Surround 5.1 (IEC958/AC3) Output (sinks: 1, sources: 0, priority: 300, available: yes) output:iec958-ac3-surround-51+input:mono-fallback: Digital Surround 5.1 (IEC958/AC3) Output + Mono Input (sinks: 1, sources: 1, priority: 301, available: yes) output:iec958-ac3-surround-51+input:multichannel-input: Digital Surround 5.1 (IEC958/AC3) Output + Multichannel Input (sinks: 1, sources: 1, priority: 301, available: yes) off: Off (sinks: 0, sources: 0, priority: 0, available: yes) Active Profile: output:analog-stereo Ports: analog-input-mic: Microphone (type: Mic, priority: 8700, latency offset: 0 usec, availability unknown) Properties: device.icon_name = "audio-input-microphone" Part of profile(s): input:mono-fallback, output:analog-stereo+input:mono-fallback, output:iec958-stereo+input:mono-fallback, output:iec958-ac3-surround-51+input:mono-fallback analog-output-speaker: Speakers (type: Speaker, priority: 10000, latency offset: 0 usec, availability unknown) Properties: device.icon_name = "audio-speakers" Part of profile(s): output:analog-stereo, output:analog-stereo+input:mono-fallback, output:analog-stereo+input:multichannel-input iec958-stereo-output: Digital Output (S/PDIF) (type: SPDIF, priority: 0, latency offset: 0 usec, availability unknown) Part of profile(s): output:iec958-stereo, output:iec958-stereo+input:mono-fallback, output:iec958-stereo+input:multichannel-input Card #4 Name: alsa_card.usb-Generic_USB_Camera_200901010001-02 Driver: module-alsa-card.c Owner Module: 28 Properties: alsa.card = "3" alsa.card_name = "USB Camera" alsa.long_card_name = "Generic USB Camera at usb-0000:00:1d.7-6, high speed" alsa.driver_name = "snd_usb_audio" device.bus_path = "pci-0000:00:1d.7-usb-0:6:1.2" sysfs.path = "/devices/pci0000:00/0000:00:1d.7/usb3/3-6/3-6:1.2/sound/card3" <a href="http://udev.id">udev.id</a> = "usb-Generic_USB_Camera_200901010001-02" device.bus = "usb" <a href="http://device.vendor.id">device.vendor.id</a> = "0bda" <a href="http://device.vendor.name">device.vendor.name</a> = "Realtek Semiconductor Corp." <a href="http://device.product.id">device.product.id</a> = "3035" <a href="http://device.product.name">device.product.name</a> = "USB Camera" device.serial = "Generic_USB_Camera_200901010001" device.form_factor = "webcam" device.string = "3" device.description = "USB Camera" module-udev-detect.discovered = "1" device.icon_name = "camera-web-usb" Profiles: input:analog-stereo: Analog Stereo Input (sinks: 0, sources: 1, priority: 65, available: yes) input:iec958-stereo: Digital Stereo (IEC958) Input (sinks: 0, sources: 1, priority: 55, available: yes) off: Off (sinks: 0, sources: 0, priority: 0, available: yes) Active Profile: input:analog-stereo Ports: analog-input-mic: Microphone (type: Mic, priority: 8700, latency offset: 0 usec, availability unknown) Properties: device.icon_name = "audio-input-microphone" Part of profile(s): input:analog-stereo iec958-stereo-input: Digital Input (S/PDIF) (type: SPDIF, priority: 0, latency offset: 0 usec, availability unknown) Part of profile(s): input:iec958-stereo </div><div>=== </div></div> <div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Fri, Jan 27, 2023 at 3:17 PM Sean Greenslade <<a href="mailto:sean@seangreenslade.com">sean@seangreenslade.com</a>> wrote: </div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex">On January 27, 2023 10:47:45 AM PST, Paul Elliott <<a href="mailto:pelliott@blackpatchpanel.com" target="_blank">pelliott@blackpatchpanel.com</a>> wrote: >My Plugable usb audio adapter <<a href="https://tinyurl.com/ysw3y93p" rel="noreferrer" target="_blank">https://tinyurl.com/ysw3y93p</a>> has two >jacks, >a pink one and a greenone. One is for (pink) microphone and microphone >speaker the other is supposed to be (green) lineout. > >I want to plug into line out because I want to use the pink one for >microphone. > >Currently sound comes out of the pink one and silence out of the green >one. > >I can not solve this problem by setting a different default sink, >because >the device shows only one port called analog-output-speaker. > >How to I get pulse audio to create a port for the green jack, so I can >set >it into the default? Can you post the output of this command while the card is plugged in? $ pactl list cards --Sean </blockquote></div> -- <div dir="ltr" class="gmail_signature"><div dir="ltr">Paul Elliott 1(512)837-1096 pelliott@BlackPatchPanel.com 3300 Plaza Drive, apt 1 <a href="http://www.free.blackpatchpanel.com/pme/" target="_blank">http://www.free.blackpatchpanel.com/pme/</a> New Albany, IN 47150 </div></div>