<div dir="ltr"><div dir="ltr">Le lun. 11 sept. 2023 à 00:50, Sean Greenslade <<a href="mailto:sean@seangreenslade.com">sean@seangreenslade.com</a>> a écrit :<br></div><div class="gmail_quote"><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex">On Fri, Sep 08, 2023 at 05:02:54PM +0200, Antoine Nauzet wrote:<br>
> Le ven. 8 sept. 2023 à 07:55, Sean Greenslade <<a href="mailto:sean@seangreenslade.com" target="_blank">sean@seangreenslade.com</a>> a<br>
> > I would start with using your distro's pulse package and checking both<br>
> > the system logs and the pulseaudio logs. I would expect there to be some<br>
> > chatter when a bluetooth device event like that happens.<br>
> ><br>
> > --Sean<br>
> ><br>
> ><br>
> I'm back to distro's pulse package. When the headset_audio_gateway<br>
> capability is switch to not available, the pulse audio logs this:<br>
> <br>
> ( 543.481|   8.707) D: [pulseaudio] bluez5-util.c: Device<br>
> /org/bluez/hci0/dev_78_29_C9_4F_C2_4E removed<br>
<br>
This line only happens when pulse receives an "InterfacesRemoved"<br>
message from Bluez. Whatever is going wrong in your system, it's<br>
happening in the bluetooth stack itself. Pulse has no control over it.<br>
I think you'll need to ask for help from the Bluez project.<br></blockquote><div><br></div><div>Ok, I will ask them. Thank you for your help. </div><div><br></div><div> </div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex">
> ( 543.482|   0.000) D: [pulseaudio] backend-ofono.c: HF card removed:<br>
> /card_2<br>
> ( 543.482|   0.000) D: [pulseaudio] bluez5-util.c: Transport /card_2 state:<br>
> idle -> disconnected<br>
> ( 543.482|   0.000) D: [pulseaudio] card.c: Setting card<br>
> bluez_card.4C_DD_31_43_8E_FF profile headset_audio_gateway to availability<br>
> status no<br>
> ( 543.482|   0.000) D: [pulseaudio] device-port.c: Setting port<br>
> phone-output to status no<br>
> ( 543.482|   0.000) D: [pulseaudio] core-subscribe.c: Dropped redundant<br>
> event due to change event.<br>
> <br>
> Is "card_2" the card "2" display when typing pactl list cards?<br>
<br>
No, /card_2 is a reference to the transport path from the bluetooth<br>
stack. Nothing to do with the card numberings in pulse.<br>
<br>
--Sean<br>
<br></blockquote><div>Ok. Thanks again</div><div> </div></div></div>