[Bug 75824] Screen resize when X starts

[bugzilla-daemon at freedesktop.org]

https://bugs.freedesktop.org/show_bug.cgi?id=75824

--- Comment #2 from Sven Müller <musv at gmx.de> ---
Found this bug entry. 

I have also the resize problem:

[   294.867] (II) qxl(0): Output Virtual-0 using monitor section Monitor0
[   294.867] (II) qxl(0): Output Virtual-1 has no monitor section
[   294.867] (II) qxl(0): Output Virtual-2 has no monitor section
[   294.867] (II) qxl(0): Output Virtual-3 has no monitor section
[   294.867] (II) qxl(0): EDID for output Virtual-0
[   294.867] (II) qxl(0): Printing probed modes for output Virtual-0
[   294.867] (II) qxl(0): Modeline "1920x1200"x59.9  193.25  1920 2056 2256
2592  1200 1203 1209 1245 -hsync +vsync (74.6 kHz UP)
[   294.867] (II) qxl(0): Modeline "1024x768"x59.9   63.50  1024 1072 1176 1328
 768 771 775 798 -hsync +vsync (47.8 kHz P)
[   294.867] (II) qxl(0): Modeline "1920x1080"x60.0  173.00  1920 2048 2248
2576  1080 1083 1088 1120 -hsync +vsync (67.2 kHz)
[   294.867] (II) qxl(0): Modeline "1600x1200"x59.9  161.00  1600 1712 1880
2160  1200 1203 1207 1245 -hsync +vsync (74.5 kHz)
[   294.867] (II) qxl(0): Modeline "1680x1050"x60.0  146.25  1680 1784 1960
2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[   294.867] (II) qxl(0): Modeline "1400x1050"x60.0  121.75  1400 1488 1632
1864  1050 1053 1057 1089 -hsync +vsync (65.3 kHz)
[   294.867] (II) qxl(0): Modeline "1280x1024"x59.9  109.00  1280 1368 1496
1712  1024 1027 1034 1063 -hsync +vsync (63.7 kHz)
[   294.867] (II) qxl(0): Modeline "1440x900"x59.9  106.50  1440 1528 1672 1904
 900 903 909 934 -hsync +vsync (55.9 kHz)
[   294.867] (II) qxl(0): Modeline "1280x960"x59.9  101.25  1280 1360 1488 1696
 960 963 967 996 -hsync +vsync (59.7 kHz)
[   294.867] (II) qxl(0): Modeline "1280x854"x59.9   89.25  1280 1352 1480 1680
 854 857 867 887 -hsync +vsync (53.1 kHz)
[   294.867] (II) qxl(0): Modeline "1280x800"x59.8   83.50  1280 1352 1480 1680
 800 803 809 831 -hsync +vsync (49.7 kHz)
[   294.867] (II) qxl(0): Modeline "1280x720"x59.9   74.50  1280 1344 1472 1664
 720 723 728 748 -hsync +vsync (44.8 kHz)
[   294.867] (II) qxl(0): Modeline "1152x768"x59.8   71.75  1152 1216 1328 1504
 768 771 781 798 -hsync +vsync (47.7 kHz)
[   294.867] (II) qxl(0): Modeline "800x600"x59.9   38.25  800 832 912 1024 
600 603 607 624 -hsync +vsync (37.4 kHz)
[   294.867] (II) qxl(0): Modeline "848x480"x59.7   31.50  848 872 952 1056 
480 483 493 500 -hsync +vsync (29.8 kHz)
[   294.867] (II) qxl(0): Modeline "720x480"x59.7   26.75  720 744 808 896  480
483 493 500 -hsync +vsync (29.9 kHz)
[   294.867] (II) qxl(0): Modeline "640x480"x59.4   23.75  640 664 720 800  480
483 487 500 -hsync +vsync (29.7 kHz)
[   294.867] (II) qxl(0): EDID for output Virtual-1
[   294.867] (II) qxl(0): EDID for output Virtual-2
[   294.867] (II) qxl(0): EDID for output Virtual-3
[   294.867] (II) qxl(0): Output Virtual-0 connected
[   294.867] (II) qxl(0): Output Virtual-1 disconnected
[   294.867] (II) qxl(0): Output Virtual-2 disconnected
[   294.867] (II) qxl(0): Output Virtual-3 disconnected
[   294.867] (II) qxl(0): Using user preference for initial modes
[   294.867] (II) qxl(0): Output Virtual-0 using initial mode 1920x1200
[   294.867] (II) qxl(0): Using default gamma of (1.0, 1.0, 1.0) unless
otherwise stated.
[   294.867] (II) qxl(0): PreInit complete
[   294.867] (--) Depth 24 pixmap format is 32 bpp
[   294.867] (II) UXA(0): Driver registered support for the following
operations:
[   294.867] (II)         solid
[   294.867] (II)         copy
[   294.867] (II)         composite (RENDER acceleration)
[   294.867] (II)         put_image
[   294.867] (II) qxl(0): RandR 1.2 enabled, ignore the following RandR
disabled message.
[   294.867] resizing primary to 1024x768
[   294.868] primary is 0xee7390
[   294.874] (--) RandR disabled

- Connected Monitor is 30" and can do: 2560x1440
- Host system: Gentoo
- Guest system: Arch Linux, installed with KVM libvirt (virt-manager)
- Don't have any border problem.

It would be fine to have to chance to deactivate the resizing somehow.

-- 
You are receiving this mail because:
You are the assignee for the bug.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freedesktop.org/archives/spice-bugs/attachments/20150605/f6571f83/attachment.html>