[Spice-devel] Spice-gtk usbredir
Hans de Goede
hdegoede at redhat.com
Fri Sep 30 06:56:11 PDT 2011
Hi,
On 09/30/2011 03:32 PM, nicolas prochazka wrote:
> Hello,
> no change , usb stick not seen, new idea ?
>
> 1 )
>
> /usr/local/bin/qemu -name M_fedora15 -spice port=11982,disable-ticketing -soundhw hda -vga qxl*-readconfig /tmp/ehci * -device virtio-serial -chardev spicevmc,id=vdagent,name=vdagent -device virtserialport,chardev=vdagent,name=com.redhat.spice.0 -cpu kvm64 -localtime -vnc 10.98.98.1:152 <http://10.98.98.1:152> -monitor tcp:127.0.0.1:10152 <http://127.0.0.1:10152>,server,nowait,nodelay -m 2048 -pidfile /var/run/qemu/M_fedora15.pid -net tap,vlan=5,name=externe,script=/etc/qemu-ifEup,downscript=/etc/qemu-ifEdown,ifname=vmEtap52 -net nic,vlan=5,macaddr=ac:de:49:29:58:26,model=rtl8139 -drive
> file=/swapfile-guest/swap1,if=ide,index=1,media=disk,snapshot=on -rtc base=localtime -drive file=/mnt/vdisk/images/MASTER-fedora15.1317382859.042259.MASTER,index=0,media=disk,snapshot=off,cache=writeback -drive file=/swapfile-guest/swap1,if=ide,index=2,media=disk,snapshot=on,boot=off -drive file=/mnt/vdisk/iso/Fedora-15-i686-Live-Desktop.iso,index=3,media=cdrom -boot d -fda fat:floppy:/mnt/vdisk/diskconf/M_fedora15 -chardev spicevmc,name=usbredir,id=usbredirchardev1 -device usb-redir,chardev=usbredirchardev1,id=usbredirdev1,debug=3 -chardev spicevmc,name=usbredir,id=usbredirchardev2 -device
> usb-redir,chardev=usbredirchardev2,id=usbredirdev2,debug=3 -chardev spicevmc,name=usbredir,id=usbredirchardev3 -device usb-redir,chardev=usbredirchardev3,id=usbredirdev3,debug=3
>
> 2 ) automounting is disable , just notifier of new usb plug.
> Keyboard focus : I write into xterm under the fedora guest. : vm having keyboard focus
> auto redirect usb devices checkbox checked : yes
>
Here:
> (spicy:23239): GLib-GObject-WARNING **: g_object_set_valist: object class `SpiceDisplay' has no property named `auto-usbredir'
Is a clue to your problem. Likely you've an older version of spice-gtk installed in another libdir then
where you installed the latest version, run ldd un spicy, ie:
ldd /usr/local/bin/spicy
And see which libspice-client-* it is using. If the one used is not at the location where
you did the latest make install (I assume you did do a make install, right?) you can
set LD_LIBRARY_PATH to point to point to the latest, ie:
export LD_LIBRARY_PATH=/usr/local/lib
ldd /usr/local/bin/spicy
The ldd command is to check the LD_LIBRARY_PATH setting helps, note that setting
LD_LIBRARY_PATH won't work over sudo / su, so first do
su -
or:
sudo su -
and then set the LD_LIBRARY_PATH and run spicy without sudo.
Regards,
Hans
> Regards,
> Nicolas Prochazka.
>
>
> ^Ccolossus:~ # spicy
> libusb:debug [libusb_init]
> libusb:debug [find_usbfs_path] found usbfs at /dev/bus/usb
> libusb:debug [op_init] bulk continuation flag supported
> libusb:debug [op_init] found usb devices in sysfs
> libusb:debug [usbi_add_pollfd] add fd 6 events 1
> libusb:debug [usbi_io_init] using timerfd for timeouts
> libusb:debug [usbi_add_pollfd] add fd 8 events 1
> libusb:debug [libusb_get_device_list]
> libusb:debug [sysfs_scan_device] scan usb1
> libusb:debug [sysfs_scan_device] bus=1 dev=1
> libusb:debug [enumerate_device] busnum 1 devaddr 1 session_id 257
> libusb:debug [enumerate_device] allocating new device for 1/1 (session 257)
> libusb:debug [sysfs_scan_device] scan usb2
> libusb:debug [sysfs_scan_device] bus=2 dev=1
> libusb:debug [enumerate_device] busnum 2 devaddr 1 session_id 513
> libusb:debug [enumerate_device] allocating new device for 2/1 (session 513)
> libusb:debug [sysfs_scan_device] scan usb3
> libusb:debug [sysfs_scan_device] bus=3 dev=1
> libusb:debug [enumerate_device] busnum 3 devaddr 1 session_id 769
> libusb:debug [enumerate_device] allocating new device for 3/1 (session 769)
> libusb:debug [sysfs_scan_device] scan usb4
> libusb:debug [sysfs_scan_device] bus=4 dev=1
> libusb:debug [enumerate_device] busnum 4 devaddr 1 session_id 1025
> libusb:debug [enumerate_device] allocating new device for 4/1 (session 1025)
> libusb:debug [sysfs_scan_device] scan usb5
> libusb:debug [sysfs_scan_device] bus=5 dev=1
> libusb:debug [enumerate_device] busnum 5 devaddr 1 session_id 1281
> libusb:debug [enumerate_device] allocating new device for 5/1 (session 1281)
> libusb:debug [sysfs_scan_device] scan usb6
> libusb:debug [sysfs_scan_device] bus=6 dev=1
> libusb:debug [enumerate_device] busnum 6 devaddr 1 session_id 1537
> libusb:debug [enumerate_device] allocating new device for 6/1 (session 1537)
> libusb:debug [sysfs_scan_device] scan usb7
> libusb:debug [sysfs_scan_device] bus=7 dev=1
> libusb:debug [enumerate_device] busnum 7 devaddr 1 session_id 1793
> libusb:debug [enumerate_device] allocating new device for 7/1 (session 1793)
> libusb:debug [sysfs_scan_device] scan usb8
> libusb:debug [sysfs_scan_device] bus=8 dev=1
> libusb:debug [enumerate_device] busnum 8 devaddr 1 session_id 2049
> libusb:debug [enumerate_device] allocating new device for 8/1 (session 2049)
> libusb:debug [sysfs_scan_device] scan 2-2
> libusb:debug [sysfs_scan_device] bus=2 dev=3
> libusb:debug [enumerate_device] busnum 2 devaddr 3 session_id 515
> libusb:debug [enumerate_device] allocating new device for 2/3 (session 515)
> libusb:debug [discovered_devs_append] need to increase capacity
> libusb:debug [sysfs_scan_device] scan 4-2
> libusb:debug [sysfs_scan_device] bus=4 dev=2
> libusb:debug [enumerate_device] busnum 4 devaddr 2 session_id 1026
> libusb:debug [enumerate_device] allocating new device for 4/2 (session 1026)
> libusb:debug [sysfs_scan_device] scan 6-1
> libusb:debug [sysfs_scan_device] bus=6 dev=3
> libusb:debug [enumerate_device] busnum 6 devaddr 3 session_id 1539
> libusb:debug [enumerate_device] allocating new device for 6/3 (session 1539)
> libusb:debug [sysfs_scan_device] scan 1-3
> libusb:debug [sysfs_scan_device] bus=1 dev=11
> libusb:debug [enumerate_device] busnum 1 devaddr 11 session_id 267
> libusb:debug [enumerate_device] allocating new device for 1/11 (session 267)
> libusb:debug [libusb_unref_device] destroy device 1.1
> libusb:debug [libusb_unref_device] destroy device 2.1
> libusb:debug [libusb_unref_device] destroy device 3.1
> libusb:debug [libusb_unref_device] destroy device 4.1
> libusb:debug [libusb_unref_device] destroy device 5.1
> libusb:debug [libusb_unref_device] destroy device 6.1
> libusb:debug [libusb_unref_device] destroy device 7.1
> libusb:debug [libusb_unref_device] destroy device 8.1
> GSpice-Message: main channel: failed to connect
> GSpice-Message: main channel: opened
>
> (spicy:23239): GLib-GObject-WARNING **: g_object_set_valist: object class `SpiceDisplay' has no property named `auto-usbredir'
>
> (spicy:23239): GLib-GObject-WARNING **: g_object_get_valist: object class `SpiceDisplay' has no property named `auto-usbredir'
>
> (spicy:23239): GLib-GObject-WARNING **: g_object_set_valist: object class `SpiceDisplay' has no property named `auto-usbredir'
>
> (spicy:23239): GSpice-WARNING **: PulseAudio context failed Connection refused
> libusb:debug [libusb_unref_device] destroy device 1.11
>
> (spicy:23239): GLib-GObject-WARNING **: g_object_set_valist: object class `SpiceDisplay' has no property named `auto-usbredir'
>
> (spicy:23239): GLib-GObject-WARNING **: g_object_set_valist: object class `SpiceDisplay' has no property named `auto-usbredir'
> libusb:debug [libusb_get_device_list]
> libusb:debug [sysfs_scan_device] scan usb1
> libusb:debug [sysfs_scan_device] bus=1 dev=1
> libusb:debug [enumerate_device] busnum 1 devaddr 1 session_id 257
> libusb:debug [enumerate_device] allocating new device for 1/1 (session 257)
> libusb:debug [sysfs_scan_device] scan usb2
> libusb:debug [sysfs_scan_device] bus=2 dev=1
> libusb:debug [enumerate_device] busnum 2 devaddr 1 session_id 513
> libusb:debug [enumerate_device] allocating new device for 2/1 (session 513)
> libusb:debug [sysfs_scan_device] scan usb3
> libusb:debug [sysfs_scan_device] bus=3 dev=1
> libusb:debug [enumerate_device] busnum 3 devaddr 1 session_id 769
> libusb:debug [enumerate_device] allocating new device for 3/1 (session 769)
> libusb:debug [sysfs_scan_device] scan usb4
> libusb:debug [sysfs_scan_device] bus=4 dev=1
> libusb:debug [enumerate_device] busnum 4 devaddr 1 session_id 1025
> libusb:debug [enumerate_device] allocating new device for 4/1 (session 1025)
> libusb:debug [sysfs_scan_device] scan usb5
> libusb:debug [sysfs_scan_device] bus=5 dev=1
> libusb:debug [enumerate_device] busnum 5 devaddr 1 session_id 1281
> libusb:debug [enumerate_device] allocating new device for 5/1 (session 1281)
> libusb:debug [sysfs_scan_device] scan usb6
> libusb:debug [sysfs_scan_device] bus=6 dev=1
> libusb:debug [enumerate_device] busnum 6 devaddr 1 session_id 1537
> libusb:debug [enumerate_device] allocating new device for 6/1 (session 1537)
> libusb:debug [sysfs_scan_device] scan usb7
> libusb:debug [sysfs_scan_device] bus=7 dev=1
> libusb:debug [enumerate_device] busnum 7 devaddr 1 session_id 1793
> libusb:debug [enumerate_device] allocating new device for 7/1 (session 1793)
> libusb:debug [sysfs_scan_device] scan usb8
> libusb:debug [sysfs_scan_device] bus=8 dev=1
> libusb:debug [enumerate_device] busnum 8 devaddr 1 session_id 2049
> libusb:debug [enumerate_device] allocating new device for 8/1 (session 2049)
> libusb:debug [sysfs_scan_device] scan 2-2
> libusb:debug [sysfs_scan_device] bus=2 dev=3
> libusb:debug [enumerate_device] busnum 2 devaddr 3 session_id 515
> libusb:debug [enumerate_device] using existing device for 2/3 (session 515)
> libusb:debug [discovered_devs_append] need to increase capacity
> libusb:debug [sysfs_scan_device] scan 4-2
> libusb:debug [sysfs_scan_device] bus=4 dev=2
> libusb:debug [enumerate_device] busnum 4 devaddr 2 session_id 1026
> libusb:debug [enumerate_device] using existing device for 4/2 (session 1026)
> libusb:debug [sysfs_scan_device] scan 6-1
> libusb:debug [sysfs_scan_device] bus=6 dev=3
> libusb:debug [enumerate_device] busnum 6 devaddr 3 session_id 1539
> libusb:debug [enumerate_device] using existing device for 6/3 (session 1539)
> libusb:debug [sysfs_scan_device] scan 1-3
> libusb:debug [sysfs_scan_device] bus=1 dev=12
> libusb:debug [enumerate_device] busnum 1 devaddr 12 session_id 268
> libusb:debug [enumerate_device] allocating new device for 1/12 (session 268)
> libusb:debug [libusb_unref_device] destroy device 1.1
> libusb:debug [libusb_unref_device] destroy device 2.1
> libusb:debug [libusb_unref_device] destroy device 3.1
> libusb:debug [libusb_unref_device] destroy device 4.1
> libusb:debug [libusb_unref_device] destroy device 5.1
> libusb:debug [libusb_unref_device] destroy device 6.1
> libusb:debug [libusb_unref_device] destroy device 7.1
> libusb:debug [libusb_unref_device] destroy device 8.1
>
>
>
>
>
>
>
> /usr/local/bin/qemu -name M_fedora15 -spice port=11982,disable-ticketing -soundhw hda -vga qxl -readconfig /tmp/ehci -device virtio-serial -chardev spicevmc,id=vdagent,name=vdagent -device virtserialport,chardev=vdagent,name=com.redhat.spice.0 -cpu kvm64 -localtime -vnc 10.98.98.1:152 <http://10.98.98.1:152> -monitor tcp:127.0.0.1:10152 <http://127.0.0.1:10152>,server,nowait,nodelay -m 2048 -pidfile /var/run/qemu/M_fedora15.pid -net tap,vlan=5,name=externe,script=/etc/qemu-ifEup,downscript=/etc/qemu-ifEdown,ifname=vmEtap52 -net nic,vlan=5,macaddr=ac:de:49:29:58:26,model=rtl8139 -drive
> file=/swapfile-guest/swap1,if=ide,index=1,media=disk,snapshot=on -rtc base=localtime -drive file=/mnt/vdisk/images/MASTER-fedora15.1317382859.042259.MASTER,index=0,media=disk,snapshot=off,cache=writeback -drive file=/swapfile-guest/swap1,if=ide,index=2,media=disk,snapshot=on,boot=off -drive file=/mnt/vdisk/iso/Fedora-15-i686-Live-Desktop.iso,index=3,media=cdrom -boot d -fda fat:floppy:/mnt/vdisk/diskconf/M_fedora15 -chardev spicevmc,name=usbredir,id=usbredirchardev1 -device usb-redir,chardev=usbredirchardev1,id=usbredirdev1,debug=3 -chardev spicevmc,name=usbredir,id=usbredirchardev2 -device
> usb-redir,chardev=usbredirchardev2,id=usbredirdev2,debug=3 -chardev spicevmc,name=usbredir,id=usbredirchardev3 -device usb-redir,chardev=usbredirchardev3,id=usbredirdev3,debug=3
> do_spice_init: starting 0.9.1
> spice_server_add_interface: SPICE_INTERFACE_KEYBOARD
> spice_server_add_interface: SPICE_INTERFACE_MOUSE
> spice_server_add_interface: SPICE_INTERFACE_QXL
> red_worker_main: begin
> ensure_display_channel_created: create display channel
> ensure_cursor_channel_created: create cursor channel
> spice_server_add_interface: SPICE_INTERFACE_PLAYBACK
> spice_server_add_interface: SPICE_INTERFACE_RECORD
> *** EHCI support is under development ***
> spice_server_char_device_add_interface: CHAR_DEVICE usbredir
> spice_server_char_device_add_interface: CHAR_DEVICE usbredir
> spice_server_char_device_add_interface: CHAR_DEVICE usbredir
> handle_dev_input: start
> reds_handle_auth_mechanism: Auth method: 1
> reds_handle_main_link:
> reds_disconnect:
> reds_show_new_channel: channel 1:0, connected successfully, over Non Secure link
> main_channel_link: add main channel client
> reds_handle_main_link: NEW Client 0x2dd87f0 mcc 0x2df5440 connect-id 1804289383
> main_channel_handle_parsed: net test: latency 0.629000 ms, bitrate 856903765 bps (817.207112 Mbps)
> reds_handle_auth_mechanism: Auth method: 1
> reds_show_new_channel: channel 6:0, connected successfully, over Non Secure link
> reds_handle_auth_mechanism: Auth method: 1
> reds_show_new_channel: channel 5:0, connected successfully, over Non Secure link
> reds_handle_auth_mechanism: Auth method: 1
> reds_show_new_channel: channel 2:0, connected successfully, over Non Secure link
> red_dispatcher_set_display_peer:
> handle_dev_input: connect
> handle_new_display_channel: add display channel client
> reds_handle_auth_mechanism: Auth method: 1
> handle_new_display_channel: New display (client 0x2dd87f0) dcc 0x2e2d610 stream 0x2de9800
> handle_new_display_channel: jpeg disabled
> handle_new_display_channel: zlib-over-glz disabled
> listen_to_new_client_channel: NEW ID = 0
> reds_show_new_channel: channel 4:0, connected successfully, over Non Secure link
> red_dispatcher_set_cursor_peer:
> display_channel_client_wait_for_init: creating encoder with id == 0
> handle_dev_input: cursor connect
> red_connect_cursor: add cursor channel client
> listen_to_new_client_channel: NEW ID = 0
> reds_handle_auth_mechanism: Auth method: 1
> reds_show_new_channel: channel 3:0, connected successfully, over Non Secure link
> inputs_connect: inputs channel client create
> display_channel_release_item: not pushed (101)
> handle_dev_input: OOM1 #draw=6, #red_draw=60, #glz_draw=56 current 6 pipes 0
> handle_dev_input: OOM2 #draw=6, #red_draw=60, #glz_draw=56 current 6 pipes 0
> handle_dev_input: OOM1 #draw=7, #red_draw=61, #glz_draw=57 current 7 pipes 0
> red_free_some: #draw=7, #red_draw=61, #glz_draw=57
> handle_dev_input: OOM2 #draw=0, #red_draw=0, #glz_draw=0 current 0 pipes 0
> spice_server_add_interface: SPICE_INTERFACE_TABLET
> handle_dev_input: mouse mode 2
> red_channel_client_disconnect: 0x2e2d610 (channel 0x204fae0 type 2 id 0)
> snd_channel_put: sound channel freed
>
> red_channel_client_disconnect: 0x2df5440 (channel 0x2df6660 type 1 id 0)
> display_channel_client_on_disconnect:
> main_channel_client_on_disconnect: rcc=0x2df5440
> reds_client_disconnect:
> red_client_destroy: destroy client with #channels 4
> red_channel_client_disconnect: 0x2e195a0 (channel 0x1fb3fe0 type 3 id 0)
> red_dispatcher_disconnect_cursor_peer:
> display_channel_client_on_disconnect: #draw=41, #red_draw=41, #glz_draw=0
> red_channel_client_disconnect: 0x2e2bb90 (channel 0x2050060 type 4 id 0)
> handle_dev_input: disconnect cursor client
> red_channel_client_disconnect: 0x2e2bb90 (channel 0x2050060 type 4 id 0)
> red_dispatcher_disconnect_display_peer:
> handle_dev_input: disconnect display client
> red_channel_client_disconnect: 0x2e2d610 (channel 0x204fae0 type 2 id 0)
> red_channel_client_disconnect: 0x2df5440 (channel 0x2df6660 type 1 id 0)
> snd_channel_put: sound channel freed
>
> reds_handle_auth_mechanism: Auth method: 1
> reds_handle_main_link:
> reds_disconnect:
> reds_show_new_channel: channel 1:0, connected successfully, over Non Secure link
> main_channel_link: add main channel client
> reds_handle_main_link: NEW Client 0x2f9f530 mcc 0x2a2c800 connect-id 846930886
> main_channel_handle_parsed: net test: latency 0.724000 ms, bitrate 980842911 bps (935.404693 Mbps)
> reds_handle_auth_mechanism: Auth method: 1
> reds_show_new_channel: channel 6:0, connected successfully, over Non Secure link
> reds_handle_auth_mechanism: Auth method: 1
> reds_show_new_channel: channel 5:0, connected successfully, over Non Secure link
> reds_handle_auth_mechanism: Auth method: 1
> reds_show_new_channel: channel 2:0, connected successfully, over Non Secure link
> red_dispatcher_set_display_peer:
> handle_dev_input: connect
> handle_new_display_channel: add display channel client
> handle_new_display_channel: New display (client 0x2f9f530) dcc 0x7fdfd8e14f40 stream 0x2a19db0
> handle_new_display_channel: jpeg disabled
> handle_new_display_channel: zlib-over-glz disabled
> listen_to_new_client_channel: NEW ID = 0
> display_channel_client_wait_for_init: creating encoder with id == 0
> reds_handle_auth_mechanism: Auth method: 1
> reds_show_new_channel: channel 4:0, connected successfully, over Non Secure link
> red_dispatcher_set_cursor_peer:
> handle_dev_input: cursor connect
> red_connect_cursor: add cursor channel client
> listen_to_new_client_channel: NEW ID = 0
> reds_handle_auth_mechanism: Auth method: 1
> reds_show_new_channel: channel 3:0, connected successfully, over Non Secure link
> inputs_connect: inputs channel client create
>
>
>
>
>
>
> 2011/9/30 Hans de Goede <hdegoede at redhat.com <mailto:hdegoede at redhat.com>>
>
> Hi,
>
>
> On 09/30/2011 03:03 PM, nicolas prochazka wrote:
>
> Hello,
> I'm trying to play with usb redirect , I read http://hansdegoede. livejournal.com/ <http://hansdegoede.livejournal.com/> howto,
> but I cannot see usb stick under my guest vm.a
>
> I think i do something wrong.
>
>
> So 2 things stand out wrt your qemu cmdline, which explain part of the problem:
> 1) You've the first -device usb-redir,... on the cmdline before the -readconfig /tmp/ehci
> 2) You also pass the old -usb, this gives you a usb1 only bus, just drop the -usb please
>
>
> ( I 've keyboard focus in guest vm, but when I plug my usb, my opensuse mount it , is it normal ? )
>
>
> Yes and no, in my testing spice-gtk usually manages to grab the device before it gets
> mounted. and even if it does get mounted, spice-gtk should "steal" it from the native
> linux driver, and the mount should go away (unless it is busy).
>
> Is the auto redirect usb devices checkbox checked? And when you say has keyboard focus,
> did you first click and type something inside the vm? If the spice-gtk menu-bar has
> keyboard focus that does not count as the vm having keyboard focus.
>
> Regards,
>
> Hans
>
>
>
>
>
>
>
> Regards,
> Nicolas Prochazka
>
> Log of qemu /spice , and spicy
>
> DEV-10.98.98.1:~# /usr/local/bin/qemu -name M_fedora15 *-spice port=11982,disable-ticketing -soundhw hda -vga qxl -device virtio-serial -chardev spicevmc,id=vdagent,name= vdagent -device virtserialport,chardev= vdagent,name=com.redhat.spice. 0* -cpu kvm64 -localtime -usb -vnc 10.98.98.1:152 <http://10.98.98.1:152> <http://10.98.98.1:152> -monitor tcp:127.0.0.1:10152 <http://127.0.0.1:10152> <http://127.0.0.1:10152>, server,nowait,nodelay -m 2048 -pidfile /var/run/qemu/M_fedora15.pid -net tap,vlan=5,name=externe, script=/etc/qemu-ifEup, downscript=/etc/qemu-ifEdown, ifname=vmEtap52
> -net nic,vlan=5,macaddr=ac:de:49: 29:58:26,model=rtl8139 -drive
> file=/swapfile-guest/swap1,if= ide,index=1,media=disk, snapshot=on -rtc base=localtime -drive file=/mnt/vdisk/images/MASTER- fedora15.1317382859.042259. MASTER,index=0,media=disk, snapshot=off,cache=writeback -drive file=/swapfile-guest/swap1,if= ide,index=2,media=disk, snapshot=on,boot=off -drive file=/mnt/vdisk/iso/Fedora-15- i686-Live-Desktop.iso,index=3, media=cdrom -boot d -fda fat:floppy:/mnt/vdisk/ diskconf/M_fedora15 *-chardev spicevmc,name=usbredir,id= usbredirchardev1 -device usb-redir,chardev= usbredirchardev1,id= usbredirdev1,debug=3 -readconfig /tmp/ehci -chardev
> spicevmc,name=usbredir,id= usbredirchardev2 -device usb-redir,chardev= usbredirchardev2,id= usbredirdev2,debug=3 -chardev spicevmc,name=usbredir,id= usbredirchardev3 -device usb-redir,chardev= usbredirchardev3,id= usbredirdev3,debug=3*
>
>
> do_spice_init: starting 0.9.1
> spice_server_add_interface: SPICE_INTERFACE_KEYBOARD
> spice_server_add_interface: SPICE_INTERFACE_MOUSE
> spice_server_add_interface: SPICE_INTERFACE_QXL
> red_worker_main: begin
> ensure_display_channel_ created: create display channel
> ensure_cursor_channel_created: create cursor channel
> spice_server_add_interface: SPICE_INTERFACE_PLAYBACK
> spice_server_add_interface: SPICE_INTERFACE_RECORD
> spice_server_char_device_add_ interface: CHAR_DEVICE usbredir
> *** EHCI support is under development ***
> spice_server_char_device_add_ interface: CHAR_DEVICE usbredir
> spice_server_char_device_add_ interface: CHAR_DEVICE usbredir
> handle_dev_input: start
> spice_server_add_interface: SPICE_INTERFACE_TABLET
> reds_handle_auth_mechanism: Auth method: 1
> reds_handle_main_link:
> reds_disconnect:
> reds_show_new_channel: channel 1:0, connected successfully, over Non Secure link
> main_channel_link: add main channel client
> reds_handle_main_link: NEW Client 0x2de06a0 mcc 0x2de77f0 connect-id 1804289383
> handle_dev_input: mouse mode 2
> main_channel_handle_parsed: net test: latency 0.676000 ms, bitrate 840722495 bps (801.775451 Mbps)
> reds_handle_auth_mechanism: Auth method: 1
> reds_show_new_channel: channel 6:0, connected successfully, over Non Secure link
> reds_handle_auth_mechanism: Auth method: 1
> reds_show_new_channel: channel 5:0, connected successfully, over Non Secure link
> reds_handle_auth_mechanism: Auth method: 1
> reds_show_new_channel: channel 2:0, connected successfully, over Non Secure link
> red_dispatcher_set_display_ peer:
> reds_handle_auth_mechanism: Auth method: 1
> handle_dev_input: connect
> handle_new_display_channel: add display channel client
> handle_new_display_channel: New display (client 0x2de06a0) dcc 0x2e31640 stream 0x2de7500
> handle_new_display_channel: jpeg disabled
> handle_new_display_channel: zlib-over-glz disabled
> listen_to_new_client_channel: NEW ID = 0
> reds_show_new_channel: channel 4:0, connected successfully, over Non Secure link
> red_dispatcher_set_cursor_ peer:
> display_channel_client_wait_ for_init: creating encoder with id == 0
> handle_dev_input: cursor connect
> red_connect_cursor: add cursor channel client
> listen_to_new_client_channel: NEW ID = 0
> reds_handle_auth_mechanism: Auth method: 1
> reds_show_new_channel: channel 3:0, connected successfully, over Non Secure link
> inputs_connect: inputs channel client create
> display_channel_release_item: not pushed (101)
> handle_dev_input: OOM1 #draw=7, #red_draw=60, #glz_draw=56 current 7 pipes 0
> handle_dev_input: OOM2 #draw=7, #red_draw=60, #glz_draw=56 current 7 pipes 0
> handle_dev_input: OOM1 #draw=7, #red_draw=60, #glz_draw=56 current 7 pipes 0
> red_free_some: #draw=7, #red_draw=60, #glz_draw=56
> handle_dev_input: OOM2 #draw=0, #red_draw=0, #glz_draw=0 current 0 pipes 0
> handle_dev_input: OOM1 #draw=24, #red_draw=3587, #glz_draw=3567 current 24 pipes 0
> handle_dev_input: OOM2 #draw=24, #red_draw=3587, #glz_draw=3567 current 24 pipes 0
> handle_dev_input: OOM1 #draw=24, #red_draw=3587, #glz_draw=3567 current 24 pipes 0
> handle_dev_input: OOM2 #draw=24, #red_draw=3587, #glz_draw=3567 current 24 pipes 0
> handle_dev_input: OOM1 #draw=24, #red_draw=3587, #glz_draw=3567 current 24 pipes 0
> red_free_some: #draw=24, #red_draw=3587, #glz_draw=3567
> handle_dev_input: OOM2 #draw=24, #red_draw=3523, #glz_draw=3503 current 24 pipes 0
> handle_dev_input: OOM1 #draw=21, #red_draw=3905, #glz_draw=3888 current 21 pipes 0
> handle_dev_input: OOM2 #draw=21, #red_draw=3905, #glz_draw=3888 current 21 pipes 0
> handle_dev_input: OOM1 #draw=21, #red_draw=3905, #glz_draw=3888 current 21 pipes 0
> handle_dev_input: OOM2 #draw=21, #red_draw=3905, #glz_draw=3888 current 21 pipes 0
> handle_dev_input: OOM1 #draw=21, #red_draw=3905, #glz_draw=3888 current 21 pipes 0
> red_free_some: #draw=21, #red_draw=3905, #glz_draw=3888
> handle_dev_input: OOM2 #draw=21, #red_draw=3841, #glz_draw=3824 current 21 pipes 0
> handle_dev_input: OOM1 #draw=17, #red_draw=3849, #glz_draw=3835 current 17 pipes 0
> handle_dev_input: OOM2 #draw=17, #red_draw=3849, #glz_draw=3835 current 17 pipes 0
> handle_dev_input: OOM1 #draw=17, #red_draw=3849, #glz_draw=3835 current 17 pipes 0
> red_free_some: #draw=17, #red_draw=3849, #glz_draw=3835
> handle_dev_input: OOM2 #draw=17, #red_draw=3785, #glz_draw=3771 current 17 pipes 0
> handle_dev_input: OOM1 #draw=16, #red_draw=3798, #glz_draw=3784 current 16 pipes 0
> handle_dev_input: OOM2 #draw=16, #red_draw=3798, #glz_draw=3784 current 16 pipes 0
> handle_dev_input: OOM1 #draw=16, #red_draw=3798, #glz_draw=3784 current 16 pipes 0
> handle_dev_input: OOM2 #draw=16, #red_draw=3798, #glz_draw=3784 current 16 pipes 0
> handle_dev_input: OOM1 #draw=16, #red_draw=3798, #glz_draw=3784 current 16 pipes 0
> red_free_some: #draw=16, #red_draw=3798, #glz_draw=3784
> handle_dev_input: OOM2 #draw=16, #red_draw=3734, #glz_draw=3720 current 16 pipes 0
> handle_dev_input: OOM1 #draw=21, #red_draw=3756, #glz_draw=3740 current 21 pipes 0
> handle_dev_input: OOM2 #draw=21, #red_draw=3756, #glz_draw=3740 current 21 pipes 0
> handle_dev_input: OOM1 #draw=16, #red_draw=3754, #glz_draw=3740 current 16 pipes 0
> handle_dev_input: OOM2 #draw=16, #red_draw=3754, #glz_draw=3740 current 16 pipes 0
> handle_dev_input: OOM1 #draw=16, #red_draw=3754, #glz_draw=3740 current 16 pipes 0
> red_free_some: #draw=16, #red_draw=3754, #glz_draw=3740
> handle_dev_input: OOM2 #draw=16, #red_draw=3690, #glz_draw=3676 current 16 pipes 0
> handle_dev_input: OOM1 #draw=15, #red_draw=3716, #glz_draw=3702 current 15 pipes 0
> handle_dev_input: OOM2 #draw=15, #red_draw=3716, #glz_draw=3702 current 15 pipes 0
> handle_dev_input: OOM1 #draw=15, #red_draw=3716, #glz_draw=3702 current 15 pipes 0
> handle_dev_input: OOM2 #draw=15, #red_draw=3716, #glz_draw=3702 current 15 pipes 0
> handle_dev_input: OOM1 #draw=15, #red_draw=3716, #glz_draw=3702 current 15 pipes 0
> red_free_some: #draw=15, #red_draw=3716, #glz_draw=3702
> handle_dev_input: OOM2 #draw=15, #red_draw=3652, #glz_draw=3638 current 15 pipes 0
> handle_dev_input: OOM1 #draw=15, #red_draw=3654, #glz_draw=3640 current 15 pipes 0
> red_free_some: #draw=15, #red_draw=3654, #glz_draw=3640
> handle_dev_input: OOM2 #draw=15, #red_draw=3590, #glz_draw=3576 current 15 pipes 0
> handle_dev_input: OOM1 #draw=16, #red_draw=3667, #glz_draw=3652 current 16 pipes 0
> handle_dev_input: OOM2 #draw=16, #red_draw=3667, #glz_draw=3652 current 16 pipes 0
> handle_dev_input: OOM1 #draw=16, #red_draw=3667, #glz_draw=3652 current 16 pipes 0
> handle_dev_input: OOM2 #draw=16, #red_draw=3667, #glz_draw=3652 current 16 pipes 0
> handle_dev_input: OOM1 #draw=16, #red_draw=3667, #glz_draw=3652 current 16 pipes 0
> red_free_some: #draw=16, #red_draw=3667, #glz_draw=3652
> handle_dev_input: OOM2 #draw=16, #red_draw=3603, #glz_draw=3588 current 16 pipes 0
> handle_dev_input: OOM1 #draw=19, #red_draw=3625, #glz_draw=3607 current 15 pipes 5
> handle_dev_input: OOM2 #draw=19, #red_draw=3625, #glz_draw=3607 current 15 pipes 5
> handle_dev_input: OOM1 #draw=19, #red_draw=3625, #glz_draw=3607 current 15 pipes 6
> handle_dev_input: OOM2 #draw=19, #red_draw=3625, #glz_draw=3607 current 15 pipes 6
> handle_dev_input: OOM1 #draw=15, #red_draw=3623, #glz_draw=3609 current 15 pipes 0
> handle_dev_input: OOM2 #draw=15, #red_draw=3623, #glz_draw=3609 current 15 pipes 0
> handle_dev_input: OOM1 #draw=15, #red_draw=3623, #glz_draw=3609 current 15 pipes 0
> red_free_some: #draw=15, #red_draw=3623, #glz_draw=3609
> handle_dev_input: OOM2 #draw=15, #red_draw=3559, #glz_draw=3545 current 15 pipes 0
> handle_dev_input: OOM1 #draw=19, #red_draw=3625, #glz_draw=3608 current 19 pipes 0
> handle_dev_input: OOM2 #draw=19, #red_draw=3625, #glz_draw=3608 current 19 pipes 0
> handle_dev_input: OOM1 #draw=19, #red_draw=3625, #glz_draw=3608 current 19 pipes 0
> handle_dev_input: OOM2 #draw=19, #red_draw=3625, #glz_draw=3608 current 19 pipes 0
> handle_dev_input: OOM1 #draw=19, #red_draw=3625, #glz_draw=3608 current 19 pipes 0
> red_free_some: #draw=19, #red_draw=3625, #glz_draw=3608
> handle_dev_input: OOM2 #draw=19, #red_draw=3561, #glz_draw=3544 current 19 pipes 0
> handle_dev_input: OOM1 #draw=17, #red_draw=3561, #glz_draw=3545 current 17 pipes 0
> handle_dev_input: OOM2 #draw=17, #red_draw=3561, #glz_draw=3545 current 17 pipes 0
> handle_dev_input: OOM1 #draw=20, #red_draw=3637, #glz_draw=3618 current 20 pipes 0
> handle_dev_input: OOM2 #draw=20, #red_draw=3637, #glz_draw=3618 current 20 pipes 0
> handle_dev_input: OOM1 #draw=20, #red_draw=3637, #glz_draw=3618 current 20 pipes 0
> handle_dev_input: OOM2 #draw=20, #red_draw=3637, #glz_draw=3618 current 20 pipes 0
> handle_dev_input: OOM1 #draw=20, #red_draw=3637, #glz_draw=3618 current 20 pipes 0
> red_free_some: #draw=20, #red_draw=3637, #glz_draw=3618
> handle_dev_input: OOM2 #draw=20, #red_draw=3573, #glz_draw=3554 current 20 pipes 0
> handle_dev_input: OOM1 #draw=25, #red_draw=3654, #glz_draw=3637 current 25 pipes 0
> handle_dev_input: OOM2 #draw=25, #red_draw=3654, #glz_draw=3637 current 25 pipes 0
> handle_dev_input: OOM1 #draw=25, #red_draw=3654, #glz_draw=3637 current 25 pipes 0
> handle_dev_input: OOM2 #draw=25, #red_draw=3654, #glz_draw=3637 current 25 pipes 0
> handle_dev_input: OOM1 #draw=25, #red_draw=3654, #glz_draw=3637 current 25 pipes 0
> red_free_some: #draw=25, #red_draw=3654, #glz_draw=3637
> handle_dev_input: OOM2 #draw=25, #red_draw=3590, #glz_draw=3573 current 25 pipes 0
> handle_dev_input: OOM1 #draw=25, #red_draw=3617, #glz_draw=3599 current 25 pipes 0
> handle_dev_input: OOM2 #draw=25, #red_draw=3617, #glz_draw=3599 current 25 pipes 0
> handle_dev_input: OOM1 #draw=25, #red_draw=3617, #glz_draw=3599 current 25 pipes 0
> handle_dev_input: OOM2 #draw=25, #red_draw=3617, #glz_draw=3599 current 25 pipes 0
> handle_dev_input: OOM1 #draw=25, #red_draw=3617, #glz_draw=3599 current 25 pipes 0
> red_free_some: #draw=25, #red_draw=3617, #glz_draw=3599
> handle_dev_input: OOM2 #draw=25, #red_draw=3553, #glz_draw=3535 current 25 pipes 0
> handle_dev_input: OOM1 #draw=22, #red_draw=3612, #glz_draw=3595 current 22 pipes 0
> handle_dev_input: OOM2 #draw=22, #red_draw=3612, #glz_draw=3595 current 22 pipes 0
> handle_dev_input: OOM1 #draw=22, #red_draw=3612, #glz_draw=3595 current 22 pipes 0
> red_free_some: #draw=22, #red_draw=3612, #glz_draw=3595
> handle_dev_input: OOM2 #draw=22, #red_draw=3548, #glz_draw=3531 current 22 pipes 0
> handle_dev_input: OOM1 #draw=21, #red_draw=3599, #glz_draw=3583 current 21 pipes 0
> handle_dev_input: OOM2 #draw=21, #red_draw=3599, #glz_draw=3583 current 21 pipes 0
> handle_dev_input: OOM1 #draw=21, #red_draw=3599, #glz_draw=3583 current 21 pipes 0
> red_free_some: #draw=21, #red_draw=3599, #glz_draw=3583
> handle_dev_input: OOM2 #draw=21, #red_draw=3535, #glz_draw=3519 current 21 pipes 0
> handle_dev_input: OOM1 #draw=21, #red_draw=3569, #glz_draw=3553 current 21 pipes 0
> handle_dev_input: OOM2 #draw=21, #red_draw=3569, #glz_draw=3553 current 21 pipes 0
> handle_dev_input: OOM1 #draw=21, #red_draw=3569, #glz_draw=3553 current 21 pipes 0
> red_free_some: #draw=21, #red_draw=3569, #glz_draw=3553
> handle_dev_input: OOM2 #draw=21, #red_draw=3505, #glz_draw=3489 current 21 pipes 0
> handle_dev_input: OOM1 #draw=21, #red_draw=3540, #glz_draw=3524 current 21 pipes 0
> handle_dev_input: OOM2 #draw=21, #red_draw=3540, #glz_draw=3524 current 21 pipes 0
> handle_dev_input: OOM1 #draw=21, #red_draw=3540, #glz_draw=3524 current 21 pipes 0
> handle_dev_input: OOM2 #draw=21, #red_draw=3540, #glz_draw=3524 current 21 pipes 0
> handle_dev_input: OOM1 #draw=21, #red_draw=3540, #glz_draw=3524 current 21 pipes 0
> red_free_some: #draw=21, #red_draw=3540, #glz_draw=3524
> handle_dev_input: OOM2 #draw=21, #red_draw=3476, #glz_draw=3460 current 21 pipes 0
> handle_dev_input: OOM1 #draw=24, #red_draw=3503, #glz_draw=3487 current 24 pipes 0
> handle_dev_input: OOM2 #draw=24, #red_draw=3503, #glz_draw=3487 current 24 pipes 0
> handle_dev_input: OOM1 #draw=24, #red_draw=3503, #glz_draw=3487 current 24 pipes 0
> handle_dev_input: OOM2 #draw=24, #red_draw=3503, #glz_draw=3487 current 24 pipes 0
> handle_dev_input: OOM1 #draw=24, #red_draw=3503, #glz_draw=3487 current 24 pipes 0
> red_free_some: #draw=24, #red_draw=3503, #glz_draw=3487
> handle_dev_input: OOM2 #draw=24, #red_draw=3439, #glz_draw=3423 current 24 pipes 0
> handle_dev_input: OOM1 #draw=25, #red_draw=3601, #glz_draw=3582 current 25 pipes 0
> handle_dev_input: OOM2 #draw=25, #red_draw=3601, #glz_draw=3582 current 25 pipes 0
> handle_dev_input: OOM1 #draw=25, #red_draw=3601, #glz_draw=3582 current 25 pipes 0
> red_free_some: #draw=25, #red_draw=3601, #glz_draw=3582
> handle_dev_input: OOM2 #draw=25, #red_draw=3537, #glz_draw=3518 current 25 pipes 0
> handle_dev_input: OOM1 #draw=25, #red_draw=3551, #glz_draw=3532 current 25 pipes 0
> handle_dev_input: OOM2 #draw=25, #red_draw=3551, #glz_draw=3532 current 25 pipes 0
> handle_dev_input: OOM1 #draw=25, #red_draw=3551, #glz_draw=3532 current 25 pipes 0
> handle_dev_input: OOM2 #draw=25, #red_draw=3551, #glz_draw=3532 current 25 pipes 0
> handle_dev_input: OOM1 #draw=25, #red_draw=3551, #glz_draw=3532 current 25 pipes 0
> red_free_some: #draw=25, #red_draw=3551, #glz_draw=3532
> handle_dev_input: OOM2 #draw=25, #red_draw=3487, #glz_draw=3468 current 25 pipes 0
> handle_dev_input: OOM1 #draw=26, #red_draw=3518, #glz_draw=3498 current 26 pipes 0
> handle_dev_input: OOM2 #draw=26, #red_draw=3518, #glz_draw=3498 current 26 pipes 0
> handle_dev_input: OOM1 #draw=25, #red_draw=3517, #glz_draw=3498 current 25 pipes 0
> handle_dev_input: OOM2 #draw=25, #red_draw=3517, #glz_draw=3498 current 25 pipes 0
> handle_dev_input: OOM1 #draw=25, #red_draw=3517, #glz_draw=3498 current 25 pipes 0
> red_free_some: #draw=25, #red_draw=3517, #glz_draw=3498
> handle_dev_input: OOM2 #draw=25, #red_draw=3453, #glz_draw=3434 current 25 pipes 0
> handle_dev_input: OOM1 #draw=25, #red_draw=3467, #glz_draw=3448 current 25 pipes 0
> handle_dev_input: OOM2 #draw=25, #red_draw=3467, #glz_draw=3448 current 25 pipes 0
> handle_dev_input: OOM1 #draw=25, #red_draw=3467, #glz_draw=3448 current 25 pipes 0
> handle_dev_input: OOM2 #draw=25, #red_draw=3467, #glz_draw=3448 current 25 pipes 0
> handle_dev_input: OOM1 #draw=25, #red_draw=3467, #glz_draw=3448 current 25 pipes 0
> red_free_some: #draw=25, #red_draw=3467, #glz_draw=3448
> handle_dev_input: OOM2 #draw=25, #red_draw=3403, #glz_draw=3384 current 25 pipes 0
> handle_dev_input: OOM1 #draw=25, #red_draw=3413, #glz_draw=3394 current 25 pipes 0
> red_free_some: #draw=25, #red_draw=3413, #glz_draw=3394
> handle_dev_input: OOM2 #draw=25, #red_draw=3349, #glz_draw=3330 current 25 pipes 0
> handle_dev_input: OOM1 #draw=26, #red_draw=3408, #glz_draw=3389 current 26 pipes 0
> handle_dev_input: OOM2 #draw=26, #red_draw=3408, #glz_draw=3389 current 26 pipes 0
> handle_dev_input: OOM1 #draw=26, #red_draw=3408, #glz_draw=3389 current 26 pipes 0
> red_free_some: #draw=26, #red_draw=3408, #glz_draw=3389
> handle_dev_input: OOM2 #draw=26, #red_draw=3344, #glz_draw=3325 current 26 pipes 0
> handle_dev_input: OOM1 #draw=26, #red_draw=3364, #glz_draw=3345 current 26 pipes 0
> handle_dev_input: OOM2 #draw=26, #red_draw=3364, #glz_draw=3345 current 26 pipes 0
> handle_dev_input: OOM1 #draw=26, #red_draw=3364, #glz_draw=3345 current 26 pipes 0
> handle_dev_input: OOM2 #draw=26, #red_draw=3364, #glz_draw=3345 current 26 pipes 0
> handle_dev_input: OOM1 #draw=26, #red_draw=3364, #glz_draw=3345 current 26 pipes 0
> red_free_some: #draw=26, #red_draw=3364, #glz_draw=3345
> handle_dev_input: OOM2 #draw=26, #red_draw=3300, #glz_draw=3281 current 26 pipes 0
> handle_dev_input: OOM1 #draw=26, #red_draw=3300, #glz_draw=3281 current 26 pipes 0
> red_free_some: #draw=26, #red_draw=3300, #glz_draw=3281
> handle_dev_input: OOM2 #draw=26, #red_draw=3236, #glz_draw=3217 current 26 pipes 0
> handle_dev_input: OOM1 #draw=26, #red_draw=3258, #glz_draw=3238 current 26 pipes 0
> handle_dev_input: OOM2 #draw=26, #red_draw=3258, #glz_draw=3238 current 26 pipes 0
> handle_dev_input: OOM1 #draw=25, #red_draw=3257, #glz_draw=3238 current 25 pipes 0
> handle_dev_input: OOM2 #draw=25, #red_draw=3257, #glz_draw=3238 current 25 pipes 0
> handle_dev_input: OOM1 #draw=25, #red_draw=3257, #glz_draw=3238 current 25 pipes 0
> red_free_some: #draw=25, #red_draw=3257, #glz_draw=3238
> handle_dev_input: OOM2 #draw=25, #red_draw=3193, #glz_draw=3174 current 25 pipes 0
> handle_dev_input: OOM1 #draw=25, #red_draw=3193, #glz_draw=3174 current 25 pipes 0
> red_free_some: #draw=25, #red_draw=3193, #glz_draw=3174
> handle_dev_input: OOM2 #draw=25, #red_draw=3129, #glz_draw=3110 current 25 pipes 0
> handle_dev_input: OOM1 #draw=26, #red_draw=3131, #glz_draw=3112 current 26 pipes 0
> red_free_some: #draw=26, #red_draw=3131, #glz_draw=3112
> handle_dev_input: OOM2 #draw=26, #red_draw=3067, #glz_draw=3048 current 26 pipes 0
> handle_dev_input: OOM1 #draw=25, #red_draw=3073, #glz_draw=3054 current 25 pipes 0
> red_free_some: #draw=25, #red_draw=3073, #glz_draw=3054
> handle_dev_input: OOM2 #draw=25, #red_draw=3009, #glz_draw=2990 current 25 pipes 0
> handle_dev_input: OOM1 #draw=33, #red_draw=3031, #glz_draw=3006 current 33 pipes 0
> handle_dev_input: OOM2 #draw=33, #red_draw=3031, #glz_draw=3006 current 33 pipes 0
> handle_dev_input: OOM1 #draw=25, #red_draw=3025, #glz_draw=3006 current 25 pipes 0
> handle_dev_input: OOM2 #draw=25, #red_draw=3025, #glz_draw=3006 current 25 pipes 0
> handle_dev_input: OOM1 #draw=25, #red_draw=3025, #glz_draw=3006 current 25 pipes 0
> red_free_some: #draw=25, #red_draw=3025, #glz_draw=3006
> handle_dev_input: OOM2 #draw=25, #red_draw=2961, #glz_draw=2942 current 25 pipes 0
> handle_dev_input: OOM1 #draw=25, #red_draw=2963, #glz_draw=2944 current 25 pipes 0
> red_free_some: #draw=25, #red_draw=2963, #glz_draw=2944
> handle_dev_input: OOM2 #draw=25, #red_draw=2899, #glz_draw=2880 current 25 pipes 0
> handle_dev_input: OOM1 #draw=26, #red_draw=2904, #glz_draw=2885 current 26 pipes 0
> red_free_some: #draw=26, #red_draw=2904, #glz_draw=2885
> handle_dev_input: OOM2 #draw=26, #red_draw=2840, #glz_draw=2821 current 26 pipes 0
> handle_dev_input: OOM1 #draw=25, #red_draw=2841, #glz_draw=2822 current 25 pipes 0
> red_free_some: #draw=25, #red_draw=2841, #glz_draw=2822
> handle_dev_input: OOM2 #draw=25, #red_draw=2777, #glz_draw=2758 current 25 pipes 0
> handle_dev_input: OOM1 #draw=25, #red_draw=2779, #glz_draw=2760 current 25 pipes 0
> red_free_some: #draw=25, #red_draw=2779, #glz_draw=2760
> handle_dev_input: OOM2 #draw=25, #red_draw=2715, #glz_draw=2696 current 25 pipes 0
> red_channel_client_disconnect: 0x2e31640 (channel 0x204fae0 type 2 id 0)
> red_channel_client_disconnect: 0x2e2fe30 (channel 0x1fb3fe0 type 3 id 0)
> display_channel_client_on_ disconnect:
> snd_channel_put: sound channel freed
>
> snd_channel_put: sound channel freed
>
> red_channel_client_disconnect: 0x2de77f0 (channel 0x2de0770 type 1 id 0)
> main_channel_client_on_ disconnect: rcc=0x2de77f0
> reds_client_disconnect:
> red_client_destroy: destroy client with #channels 4
> red_channel_client_disconnect: 0x2e2fe30 (channel 0x1fb3fe0 type 3 id 0)
> red_dispatcher_disconnect_ cursor_peer:
> display_channel_client_on_ disconnect: #draw=37, #red_draw=37, #glz_draw=0
> red_channel_client_disconnect: 0x2e2e370 (channel 0x2050060 type 4 id 0)
> handle_dev_input: disconnect cursor client
> red_channel_client_disconnect: 0x2e2e370 (channel 0x2050060 type 4 id 0)
> red_dispatcher_disconnect_ display_peer:
> handle_dev_input: disconnect display client
> red_channel_client_disconnect: 0x2e31640 (channel 0x204fae0 type 2 id 0)
> red_channel_client_disconnect: 0x2de77f0 (channel 0x2de0770 type 1 id 0)
> reds_handle_auth_mechanism: Auth method: 1
> reds_handle_main_link:
> reds_disconnect:
> reds_show_new_channel: channel 1:0, connected successfully, over Non Secure link
> main_channel_link: add main channel client
> reds_handle_main_link: NEW Client 0x2de88f0 mcc 0x2e2fdd0 connect-id 846930886
> main_channel_handle_parsed: net test: latency 0.652000 ms, bitrate 864135021 bps (824.103375 Mbps)
> reds_handle_auth_mechanism: Auth method: 1
> reds_show_new_channel: channel 6:0, connected successfully, over Non Secure link
> reds_handle_auth_mechanism: Auth method: 1
> reds_show_new_channel: channel 5:0, connected successfully, over Non Secure link
> reds_handle_auth_mechanism: Auth method: 1
> reds_show_new_channel: channel 2:0, connected successfully, over Non Secure link
> red_dispatcher_set_display_ peer:
> reds_handle_auth_mechanism: Auth method: 1
> handle_dev_input: connect
> handle_new_display_channel: add display channel client
> handle_new_display_channel: New display (client 0x2de88f0) dcc 0x7f7328480d50 stream 0x2a2c810
> handle_new_display_channel: jpeg disabled
> handle_new_display_channel: zlib-over-glz disabled
> listen_to_new_client_channel: NEW ID = 0
> reds_show_new_channel: channel 4:0, connected successfully, over Non Secure link
> red_dispatcher_set_cursor_ peer:
> display_channel_client_wait_ for_init: creating encoder with id == 0
> handle_dev_input: cursor connect
> red_connect_cursor: add cursor channel client
> listen_to_new_client_channel: NEW ID = 0
> reds_handle_auth_mechanism: Auth method: 1
> reds_show_new_channel: channel 3:0, connected successfully, over Non Secure link
> inputs_connect: inputs channel client create
> red_channel_client_disconnect: 0x2e2fdd0 (channel 0x2de0770 type 1 id 0)
> red_channel_client_disconnect: 0x7f7328480d50 (channel 0x204fae0 type 2 id 0)
> main_channel_client_on_ disconnect: rcc=0x2e2fdd0
> reds_client_disconnect:
> red_client_destroy: destroy client with #channels 4
> red_channel_client_disconnect: 0x2e30cd0 (channel 0x1fb3fe0 type 3 id 0)
> display_channel_client_on_ disconnect:
> red_dispatcher_disconnect_ cursor_peer:
> display_channel_client_on_ disconnect: #draw=21, #red_draw=21, #glz_draw=0
> red_channel_client_disconnect: 0x7f7328c430f0 (channel 0x2050060 type 4 id 0)
> handle_dev_input: disconnect cursor client
> red_channel_client_disconnect: 0x7f7328c430f0 (channel 0x2050060 type 4 id 0)
> red_dispatcher_disconnect_ display_peer:
> handle_dev_input: disconnect display client
> red_channel_client_disconnect: 0x7f7328480d50 (channel 0x204fae0 type 2 id 0)
> red_channel_client_disconnect: 0x2e2fdd0 (channel 0x2de0770 type 1 id 0)
> snd_channel_put: sound channel freed
>
> snd_channel_put: sound channel freed
>
> reds_handle_auth_mechanism: Auth method: 1
> reds_handle_main_link:
> reds_disconnect:
> reds_show_new_channel: channel 1:0, connected successfully, over Non Secure link
> main_channel_link: add main channel client
> reds_handle_main_link: NEW Client 0x33616b0 mcc 0x34ea040 connect-id 1681692777
> main_channel_handle_parsed: net test: latency 0.627000 ms, bitrate 859060402 bps (819.263842 Mbps)
> reds_handle_auth_mechanism: Auth method: 1
> reds_show_new_channel: channel 6:0, connected successfully, over Non Secure link
> reds_handle_auth_mechanism: Auth method: 1
> reds_show_new_channel: channel 5:0, connected successfully, over Non Secure link
> reds_handle_auth_mechanism: Auth method: 1
> reds_show_new_channel: channel 2:0, connected successfully, over Non Secure link
> red_dispatcher_set_display_ peer:
> handle_dev_input: connect
> handle_new_display_channel: add display channel client
> handle_new_display_channel: New display (client 0x33616b0) dcc 0x7f7328480d00 stream 0x2dff670
> handle_new_display_channel: jpeg disabled
> handle_new_display_channel: zlib-over-glz disabled
> listen_to_new_client_channel: NEW ID = 0
> display_channel_client_wait_ for_init: creating encoder with id == 0
> reds_handle_auth_mechanism: Auth method: 1
> reds_show_new_channel: channel 4:0, connected successfully, over Non Secure link
> red_dispatcher_set_cursor_ peer:
> reds_handle_auth_mechanism: Auth method: 1
> handle_dev_input: cursor connect
> red_connect_cursor: add cursor channel client
> listen_to_new_client_channel: NEW ID = 0
> reds_show_new_channel: channel 3:0, connected successfully, over Non Secure link
> inputs_connect: inputs channel client create
>
>
>
>
>
> root account
>
> *colossus:~ # spicy*
>
> libusb:debug [libusb_init]
> libusb:debug [find_usbfs_path] found usbfs at /dev/bus/usb
> libusb:debug [op_init] bulk continuation flag supported
> libusb:debug [op_init] found usb devices in sysfs
> libusb:debug [usbi_add_pollfd] add fd 6 events 1
> libusb:debug [usbi_io_init] using timerfd for timeouts
> libusb:debug [usbi_add_pollfd] add fd 8 events 1
> libusb:debug [libusb_get_device_list]
> libusb:debug [sysfs_scan_device] scan usb1
> libusb:debug [sysfs_scan_device] bus=1 dev=1
> libusb:debug [enumerate_device] busnum 1 devaddr 1 session_id 257
> libusb:debug [enumerate_device] allocating new device for 1/1 (session 257)
> libusb:debug [sysfs_scan_device] scan usb2
> libusb:debug [sysfs_scan_device] bus=2 dev=1
> libusb:debug [enumerate_device] busnum 2 devaddr 1 session_id 513
> libusb:debug [enumerate_device] allocating new device for 2/1 (session 513)
> libusb:debug [sysfs_scan_device] scan usb3
> libusb:debug [sysfs_scan_device] bus=3 dev=1
> libusb:debug [enumerate_device] busnum 3 devaddr 1 session_id 769
> libusb:debug [enumerate_device] allocating new device for 3/1 (session 769)
> libusb:debug [sysfs_scan_device] scan usb4
> libusb:debug [sysfs_scan_device] bus=4 dev=1
> libusb:debug [enumerate_device] busnum 4 devaddr 1 session_id 1025
> libusb:debug [enumerate_device] allocating new device for 4/1 (session 1025)
> libusb:debug [sysfs_scan_device] scan usb5
> libusb:debug [sysfs_scan_device] bus=5 dev=1
> libusb:debug [enumerate_device] busnum 5 devaddr 1 session_id 1281
> libusb:debug [enumerate_device] allocating new device for 5/1 (session 1281)
> libusb:debug [sysfs_scan_device] scan usb6
> libusb:debug [sysfs_scan_device] bus=6 dev=1
> libusb:debug [enumerate_device] busnum 6 devaddr 1 session_id 1537
> libusb:debug [enumerate_device] allocating new device for 6/1 (session 1537)
> libusb:debug [sysfs_scan_device] scan usb7
> libusb:debug [sysfs_scan_device] bus=7 dev=1
> libusb:debug [enumerate_device] busnum 7 devaddr 1 session_id 1793
> libusb:debug [enumerate_device] allocating new device for 7/1 (session 1793)
> libusb:debug [sysfs_scan_device] scan usb8
> libusb:debug [sysfs_scan_device] bus=8 dev=1
> libusb:debug [enumerate_device] busnum 8 devaddr 1 session_id 2049
> libusb:debug [enumerate_device] allocating new device for 8/1 (session 2049)
> libusb:debug [sysfs_scan_device] scan 2-2
> libusb:debug [sysfs_scan_device] bus=2 dev=3
> libusb:debug [enumerate_device] busnum 2 devaddr 3 session_id 515
> libusb:debug [enumerate_device] allocating new device for 2/3 (session 515)
> libusb:debug [discovered_devs_append] need to increase capacity
> libusb:debug [sysfs_scan_device] scan 4-2
> libusb:debug [sysfs_scan_device] bus=4 dev=2
> libusb:debug [enumerate_device] busnum 4 devaddr 2 session_id 1026
> libusb:debug [enumerate_device] allocating new device for 4/2 (session 1026)
> libusb:debug [sysfs_scan_device] scan 6-1
> libusb:debug [sysfs_scan_device] bus=6 dev=3
> libusb:debug [enumerate_device] busnum 6 devaddr 3 session_id 1539
> libusb:debug [enumerate_device] allocating new device for 6/3 (session 1539)
> libusb:debug [sysfs_scan_device] scan 1-3
> libusb:debug [sysfs_scan_device] bus=1 dev=8
> libusb:debug [enumerate_device] busnum 1 devaddr 8 session_id 264
> libusb:debug [enumerate_device] allocating new device for 1/8 (session 264)
> libusb:debug [libusb_unref_device] destroy device 1.1
> libusb:debug [libusb_unref_device] destroy device 2.1
> libusb:debug [libusb_unref_device] destroy device 3.1
> libusb:debug [libusb_unref_device] destroy device 4.1
> libusb:debug [libusb_unref_device] destroy device 5.1
> libusb:debug [libusb_unref_device] destroy device 6.1
> libusb:debug [libusb_unref_device] destroy device 7.1
> libusb:debug [libusb_unref_device] destroy device 8.1
> GSpice-Message: main channel: failed to connect
>
> (spicy:18840): Gtk-CRITICAL **: gtk_render_slider: assertion `height > 0' failed
> GSpice-Message: main channel: opened
>
> (spicy:18840): GLib-GObject-WARNING **: g_object_set_valist: object class `SpiceDisplay' has no property named `auto-usbredir'
>
> (spicy:18840): GLib-GObject-WARNING **: g_object_get_valist: object class `SpiceDisplay' has no property named `auto-usbredir'
>
> (spicy:18840): GLib-GObject-WARNING **: g_object_set_valist: object class `SpiceDisplay' has no property named `auto-usbredir'
>
> (spicy:18840): GSpice-WARNING **: PulseAudio context failed Connection refused
> libusb:debug [libusb_unref_device] destroy device 1.8
> libusb:debug [libusb_get_device_list]
> libusb:debug [sysfs_scan_device] scan usb1
> libusb:debug [sysfs_scan_device] bus=1 dev=1
> libusb:debug [enumerate_device] busnum 1 devaddr 1 session_id 257
> libusb:debug [enumerate_device] allocating new device for 1/1 (session 257)
> libusb:debug [sysfs_scan_device] scan usb2
> libusb:debug [sysfs_scan_device] bus=2 dev=1
> libusb:debug [enumerate_device] busnum 2 devaddr 1 session_id 513
> libusb:debug [enumerate_device] allocating new device for 2/1 (session 513)
> libusb:debug [sysfs_scan_device] scan usb3
> libusb:debug [sysfs_scan_device] bus=3 dev=1
> libusb:debug [enumerate_device] busnum 3 devaddr 1 session_id 769
> libusb:debug [enumerate_device] allocating new device for 3/1 (session 769)
> libusb:debug [sysfs_scan_device] scan usb4
> libusb:debug [sysfs_scan_device] bus=4 dev=1
> libusb:debug [enumerate_device] busnum 4 devaddr 1 session_id 1025
> libusb:debug [enumerate_device] allocating new device for 4/1 (session 1025)
> libusb:debug [sysfs_scan_device] scan usb5
> libusb:debug [sysfs_scan_device] bus=5 dev=1
> libusb:debug [enumerate_device] busnum 5 devaddr 1 session_id 1281
> libusb:debug [enumerate_device] allocating new device for 5/1 (session 1281)
> libusb:debug [sysfs_scan_device] scan usb6
> libusb:debug [sysfs_scan_device] bus=6 dev=1
> libusb:debug [enumerate_device] busnum 6 devaddr 1 session_id 1537
> libusb:debug [enumerate_device] allocating new device for 6/1 (session 1537)
> libusb:debug [sysfs_scan_device] scan usb7
> libusb:debug [sysfs_scan_device] bus=7 dev=1
> libusb:debug [enumerate_device] busnum 7 devaddr 1 session_id 1793
> libusb:debug [enumerate_device] allocating new device for 7/1 (session 1793)
> libusb:debug [sysfs_scan_device] scan usb8
> libusb:debug [sysfs_scan_device] bus=8 dev=1
> libusb:debug [enumerate_device] busnum 8 devaddr 1 session_id 2049
> libusb:debug [enumerate_device] allocating new device for 8/1 (session 2049)
> libusb:debug [sysfs_scan_device] scan 2-2
> libusb:debug [sysfs_scan_device] bus=2 dev=3
> libusb:debug [enumerate_device] busnum 2 devaddr 3 session_id 515
> libusb:debug [enumerate_device] using existing device for 2/3 (session 515)
> libusb:debug [discovered_devs_append] need to increase capacity
> libusb:debug [sysfs_scan_device] scan 4-2
> libusb:debug [sysfs_scan_device] bus=4 dev=2
> libusb:debug [enumerate_device] busnum 4 devaddr 2 session_id 1026
> libusb:debug [enumerate_device] using existing device for 4/2 (session 1026)
> libusb:debug [sysfs_scan_device] scan 6-1
> libusb:debug [sysfs_scan_device] bus=6 dev=3
> libusb:debug [enumerate_device] busnum 6 devaddr 3 session_id 1539
> libusb:debug [enumerate_device] using existing device for 6/3 (session 1539)
> libusb:debug [sysfs_scan_device] scan 1-3
> libusb:debug [sysfs_scan_device] bus=1 dev=9
> libusb:debug [enumerate_device] busnum 1 devaddr 9 session_id 265
> libusb:debug [enumerate_device] allocating new device for 1/9 (session 265)
> libusb:debug [libusb_unref_device] destroy device 1.1
> libusb:debug [libusb_unref_device] destroy device 2.1
> libusb:debug [libusb_unref_device] destroy device 3.1
> libusb:debug [libusb_unref_device] destroy device 4.1
> libusb:debug [libusb_unref_device] destroy device 5.1
> libusb:debug [libusb_unref_device] destroy device 6.1
> libusb:debug [libusb_unref_device] destroy device 7.1
> libusb:debug [libusb_unref_device] destroy device 8.1
>
>
>
> ______________________________ _________________
> Spice-devel mailing list
> Spice-devel at lists.freedesktop. org <mailto:Spice-devel at lists.freedesktop.org>
> http://lists.freedesktop.org/ mailman/listinfo/spice-devel <http://lists.freedesktop.org/mailman/listinfo/spice-devel>
>
>
More information about the Spice-devel
mailing list