[Spice-devel] [Qemu-devel] Vioserial of Windows guest OS on Qemu 0.15

Thu Jan 19 17:25:51 PST 2012

Vadim,

We downloaded the driver source from the following website.
===========================================================
wget --no-check-certificate https://alt.fedoraproject.org/pub/alt/virtio-win/latest/images/src/virtio-win-prewhql-0.1-15-sources.zip

-----Original Message-----
From: Vadim Rozenfeld [mailto:vrozenfe at redhat.com] 
Sent: Thursday, January 19, 2012 8:25 PM
To: Charles.Tsai-蔡清海-研究發展部
Cc: Michael Roth; Stefan Hajnoczi; spice-devel at lists.freedesktop.org; Alex Huang-黃必賢-研究發展部; Alon Levy; qemu-devel
Subject: Re: [Qemu-devel] [Spice-devel] Vioserial of Windows guest OS on Qemu 0.15

Just to be sure that we are on the same page:
could you tell me about the origin of the source?
Is it the latest from the Yan's repository at github.com?

----- Original Message -----
From: "Charles.Tsai-蔡清海-研究發展部" <charles.tsai at cloudena.com>
To: "Vadim Rozenfeld" <vrozenfe at redhat.com>
Cc: "Michael Roth" <mdroth at linux.vnet.ibm.com>, "Stefan Hajnoczi" <stefanha at gmail.com>, spice-devel at lists.freedesktop.org, "Alex Huang-黃必賢-研究發展部" <alex.huang at cloudena.com>, "Alon Levy" <alevy at redhat.com>, "qemu-devel" <qemu-devel at nongnu.org>
Sent: Thursday, January 19, 2012 12:06:16 PM
Subject: RE: [Qemu-devel] [Spice-devel] Vioserial of Windows guest OS on Qemu 0.15

Vadim,

We built it from the driver source. Up to this moment, we always use the same binary to test Qemu.

-----Original Message-----
From: Vadim Rozenfeld [mailto:vrozenfe at redhat.com]
Sent: Thursday, January 19, 2012 5:39 PM
To: Charles.Tsai-蔡清海-研究發展部
Cc: Michael Roth; Stefan Hajnoczi; spice-devel at lists.freedesktop.org; Alex Huang-黃必賢-研究發展部; Alon Levy; qemu-devel
Subject: RE: [Qemu-devel] [Spice-devel] Vioserial of Windows guest OS on Qemu 0.15

On Thu, 2012-01-19 at 16:33 +0800, Charles.Tsai-蔡清海-研究發展部 wrote:
> Vadim,
> 
> It is SMP system.
What about vioserial driver itself? 
did you build it from sources or is
it one, available through RHEL channels?

> 
> -----Original Message-----
> From: Vadim Rozenfeld [mailto:vrozenfe at redhat.com]
> Sent: Thursday, January 19, 2012 3:58 PM
> To: Charles.Tsai-蔡清海-研究發展部
> Cc: Michael Roth; Stefan Hajnoczi; spice-devel at lists.freedesktop.org;
> Alex Huang-黃必賢-研究發展部; Alon Levy; qemu-devel
> Subject: RE: [Qemu-devel] [Spice-devel] Vioserial of Windows guest OS 
> on Qemu 0.15
> 
> On Thu, 2012-01-19 at 09:41 +0800, Charles.Tsai-蔡清海-研究發展部 wrote:
> > Vadim,
> > 
> > I tested on Qemu 1.0.50. and found the VioSerial driver had problem to install on 64-bit Win7 guest.
> > During the driver installation, the system hung after the driver 
> > being installed. After I rebooted the guest OS, the Vioserial driver work. The hang system seemed to be found only during the driver installation.
> > 
> On UP or SMP system?
> > 
> > -----Original Message-----
> > From: Vadim Rozenfeld [mailto:vrozenfe at redhat.com]
> > Sent: Wednesday, January 18, 2012 4:57 AM
> > To: Michael Roth
> > Cc: Charles.Tsai-蔡清海-研究發展部; Stefan Hajnoczi; 
> > spice-devel at lists.freedesktop.org; Alex Huang-黃必賢-研究發展部; Alon Levy; 
> > qemu-devel
> > Subject: Re: [Qemu-devel] [Spice-devel] Vioserial of Windows guest 
> > OS on Qemu 0.15
> > 
> > On Mon, 2012-01-16 at 19:50 -0600, Michael Roth wrote:
> > > On 01/15/2012 08:02 PM, Charles.Tsai-蔡清海-研究發展部 wrote:
> > > > Vadim,
> > > >
> > > > Thank you for your prompt reply. Here are the information for our test case.
> > > >
> > > >
> > > > 1) we use the following command line to launch the guest OS
> > > >
> > > >
> > > > /usr/bin/kvm -S -M pc-0.14 -enable-kvm -m 1024 -smp
> > > > 1,sockets=1,cores=1,threads=1 -name win_xp -uuid
> > > > d9388815-ddd3-c38e-33c2-a9d5fcc7a775 -nodefconfig -nodefaults 
> > > > -chardev 
> > > > socket,id=charmonitor,path=/var/lib/libvirt/qemu/win_xp.monitor,
> > > > se rv er,nowait -mon
> > > > chardev=charmonitor,id=monitor,mode=readline
> > > > -rtc base=localtime
> > > > -device
> > > > virtio-serial-pci,id=virtio-serial0,bus=pci.0,multifunction=on,a
> > > > dd
> > > > r=
> > > > 0x5.0x0 -drive
> > > > file=/media/Images/Windows-XP.img,if=none,id=drive-ide0-0-0,form
> > > > at
> > > > =r
> > > > aw -device
> > > > ide-drive,bus=ide.0,unit=0,drive=drive-ide0-0-0,id=ide0-0-0,boot
> > > > in
> > > > de
> > > > x=1
> > > > -netdev tap,fd=17,id=hostnet0
> > > > -device
> > > > rtl8139,netdev=hostnet0,id=net0,mac=52:54:00:e8:dc:b1,bus=pci.0,
> > > > mu
> > > > lt
> > > > ifunction=on,addr=0x3.0x0
> > > > -chardev pty,id=charserial0
> > > > -device isa-serial,chardev=charserial0,id=serial0
> > > > -chardev spicevmc,id=charchannel0,name=vdagent
> > > > -device
> > > > virtserialport,bus=virtio-serial0.0,nr=1,chardev=charchannel0,id
> > > > =c
> > > > ha
> > > > nnel0,name=com.redhat.spice.0
> > > > -usb -device usb-tablet,id=input0 -spice 
> > > > port=5900,addr=0.0.0.0,disable-ticketing
> > > > -vga qxl -global qxl-vga.vram_size=67108864 -device
> > > > virtio-balloon-pci,id=balloon0,bus=pci.0,multifunction=on,addr=0
> > > > x4
> > > > .0
> > > > x0
> > > >
> > > >
> > > >
> > > > 2). In Guest Windows XP OS
> > > >
> > > >
> > > > When the following callback function of the vioserial device  is called in guest OS. The allocated resources is empty.
> > > >
> > > >
> > > > VIOSerialEvtDevicePrepareHardware() ---This function is to get the I/O address of the vioserial device and map the physical address to the logical address space.
> > > >
> > > > I added the following trace and the value of nListSize is ZERO.
> > > > TraceEvents(TRACE_LEVEL_INFORMATION, DBG_PNP, "%s 
> > > > (nListSize=%d)\n", __FUNCTION__,nListSize);
> > > >
> > > >
> > > > So far, we have tested Qemu 0.14 without any problem but Qemu 0.15 seemed to be broken in vioserial device.
> > > > Let me know if you need further information. Thanks.
> > > >
> > > 
> > > Hi Charles,
> > > 
> > > What versions of the virtio-win drivers are you using?
> > > 
> > > I've been testing virtio-serial on windows using the latest 
> > > qemu.git (1.0). Linux guests work fine, but I've been having 
> > > various issues with Windows 7, XP SP3, and Server 2008 R1. XP SP3 
> > > works intermittently for me using RHEL6.0 virtio-win, as well as the drivers at:
> > > 
> > 
> > I have seen some virtio serial port initialization problems on 1.0.50.
> > Will try to look into this problem in the following week(s).
> > 
> > > http://alt.fedoraproject.org/pub/alt/virtio-win/latest/images/bin/
> > > 
> > > But I've been getting a mix of issues such as guest hangs, 
> > > vioser-test failing to enumerate any virtio-serial devices, or 
> > > various non-critical error messages from qemu that seem to 
> > > coincide with the channel being open/closed (occasionally resulting in the channel becoming unresponsive).
> > > 
> > > Do any of these seem similar to the behaviour you're seeing? If so 
> > > I'll see if the issues go away on 0.14.0 and follow-up with a git bisect.
> > > 
> > 
> > 
> > 
> 
> 