[Spice-devel] [Qemu-devel] Vioserial of Windows guest OS on Qemu 0.15
Charles.Tsai-蔡清海-研究發展部
charles.tsai at cloudena.com
Mon Mar 19 04:16:56 PDT 2012
Vadim,
What do you mean "qemu configuration string"? Is it the build configuration or command line option?
Please let me know it. Thanks.
-----Original Message-----
From: Vadim Rozenfeld [mailto:vrozenfe at redhat.com]
Sent: Monday, March 19, 2012 5:17 PM
To: Charles.Tsai-蔡清海-研究發展部
Cc: Michael Roth; Stefan Hajnoczi; spice-devel at lists.freedesktop.org; Alex Huang-黃必賢-研究發展部; Alon Levy; qemu-devel; Paul Lu-盧偉智-研究發展部
Subject: Re: [Qemu-devel] [Spice-devel] Vioserial of Windows guest OS on Qemu 0.15
On Monday, March 19, 2012 08:29:41 AM Charles.Tsai-蔡清海-研究發展部 wrote:
> Hi Vadim,
>
> We recently encountered with many issues with new Windows Virio
> driver running on Qemu 1.0 and Qemu 1.0.50. My initial investigation
> was found that the new Viro driver could not be installed before Qemu
> 1.0.50. But my colleague right now can install the new Virio driver on
> Qemu 1.0. Such a finding is quite a bit surprise to me.
Does Windows refuse to install a new driver or just stuck?
>
> When we tested the new Virio driver on both Qemu 1.0 and 1.0.50, we
> found the Virio driver failed to work after disabling and enabling the
> driver a few times. However, the failure case largely depends on the
> type of machine. On my machine, I did not see such a problem.
Are you running SMP or UP guest? What about others?
>
> Here are a few of questions that I want to clarify for us.
>
> 1. Can the new VirIO driver be installed prior Qemu 1.0.50(the
> current head branch)?
Yes, as far as I know.
> 2. Does your QA team verify the new VirtIo driver prior Qemu 1.0.50?
> Do you recommend us to do such a test or debugging?
Our QA test our drivers on top of RHEL only. I don't know exactly what is the difference between our latest qemu-kvm and upstream
>
> 3. When we disable and enable the new VirtIO driver several times on
> either Qemu 1.0 or Qemu 1.0.50, VirtIo driver failed to work after
> enabling the new VirtIO driver. What we found in this particular case
> is that the VirtIO driver was blocked inside the DPC routine where the driver
> tried to ACK the interrupt. Based on my colleague's observation,
the
> I/O read from DPC was not trapped by the front-end driver(a Linux
> driver implemented for VirtIO)? Do you have any idea why this could happen? Also,
> did you find similar issues by you or your QA?
I know for sure that we have at least one race condition described here:
https://bugzilla.redhat.com/show_bug.cgi?id=750773
Hence, my question is whether your guest is SMP or UP?
>
> Please let us know these as soon as possible since we have a big
> trouble to make the Virio driver(new and old driver) work stably in
> any Qemu official release including Qemu 1.0.50.
I'm going to push some changes, mostly related to the above bug.
The DPC problem is completely new for me. Please post your qemu configuration string and I'll try to reproduce it and investigate this problem.
Best regards,
Vadim.
>
>
> -----Original Message-----
> From: Vadim Rozenfeld [mailto:vrozenfe at redhat.com]
> Sent: Wednesday, February 08, 2012 3:47 PM
> To: Charles.Tsai-蔡清海-研究發展部
> Cc: Michael Roth; Stefan Hajnoczi; spice-devel at lists.freedesktop.org;
> Alex
> Huang-黃必賢-研究發展部; Alon Levy; qemu-devel; Paul Lu-盧偉智-研究發展部 Subject: Re:
> [Qemu-devel] [Spice-devel] Vioserial of Windows guest OS on Qemu 0.15
>
> I'm afraid to give you any recommendations regarding QEMU stability.
> I usually work with qemu-kvm repository. But we are always doing WHQL
> process on RHEL platform only.
>
> Maybe someone from the SPICE team can comment on your question?
>
> Best regards,
> Vadim.
>
> ----- Original Message -----
> From: "Charles.Tsai-蔡清海-研究發展部" <charles.tsai at cloudena.com>
> To: "Vadim Rozenfeld" <vrozenfe at redhat.com>
> Cc: "Michael Roth" <mdroth at linux.vnet.ibm.com>, "Stefan Hajnoczi"
> <stefanha at gmail.com>, spice-devel at lists.freedesktop.org, "Alex
> Huang-黃必賢-研究發展部" <alex.huang at cloudena.com>, "Alon Levy"
> <alevy at redhat.com>, "qemu-devel" <qemu-devel at nongnu.org>, "Paul
> Lu-盧偉智-研究發展部" <paul.lu at cloudena.com> Sent: Wednesday, February 8, 2012
> 4:39:22 AM
> Subject: RE: [Qemu-devel] [Spice-devel] Vioserial of Windows guest OS
> on Qemu 0.15
>
> Vadim,
>
> Thanks. I tested Windows guest OS driver the over qemu-kvm-devel
> 1.0.50 from git://git.kernel.org/pub/scm/virt/kvm/qemu-kvm.git and it
> worked. The latest Windows guest driver from
> (https://github.com/YanVugenfirer/) seems to have to work with Qemu
> 1.0.50. My previous test ran over Qemu 1.0 and that was why it failed to work.
>
> As you mentioned, the latest driver from
> (https://github.com/YanVugenfirer/) is much more stable than the old one.
> But those drivers must work with Qemu 1.0.50 which was not verified to
> be stable. Do you think Qemu 1.0.50 is stable to be used? Please give
> us a recommendation.
>
>
> -----Original Message-----
> From: Vadim Rozenfeld [mailto:vrozenfe at redhat.com]
> Sent: Wednesday, February 08, 2012 3:06 AM
> To: Charles.Tsai-蔡清海-研究發展部
> Cc: Michael Roth; Stefan Hajnoczi; spice-devel at lists.freedesktop.org;
> Alex
> Huang-黃必賢-研究發展部; Alon Levy; qemu-devel; Paul Lu-盧偉智-研究發展部 Subject: Re:
> [Qemu-devel] [Spice-devel] Vioserial of Windows guest OS on Qemu 0.15
>
> I have tried to reproduce the problem several times without success.
>
> QEMU:
> QEMU 1.0.50 from git://git.qemu.org/qemu.git ,and qemu-kvm-devel
> 1.0.50 from git://git.kernel.org/pub/scm/virt/kvm/qemu-kvm.git
>
> My guest info:
> OS Name: Microsoft Windows 7 Enterprise
> OS Version: 6.1.7600 N/A Build 7600
>
> QEMU command line:
> sudo
> /home/vrozenfe/work/upstream/qemu/x86_64-softmmu/qemu-system-x86_64 -m
> 1024 -smp 1,sockets=1,cores=1,threads=1 -name SERIAL -uuid
> d9388815-ddd3-c38e-33c2-a9d5fcc7a775 -monitor stdio -rtc
> base=localtime -device
> virtio-serial-pci,id=virtio-serial0,bus=pci.0,multifunction=on,addr=0x
> 5.0x
> 0 -drive
> file=/home/vrozenfe/work/images/win7.qcow2,if=none,id=drive-ide0-0-0,f
> orma
> t=qcow2 -device
> ide-drive,bus=ide.0,unit=0,drive=drive-ide0-0-0,id=ide0-0-0,bootindex=
> 1
> -netdev tap,id=hostnet0 -device
> e1000,netdev=hostnet0,id=net0,mac=22:3A:40:3F:2F:12,bus=pci.0,multifun
> ctio
> n=on,addr=0x3.0x0 -chardev pty,id=charserial0 -device
> isa-serial,chardev=charserial0,id=serial0 -chardev
> spicevmc,id=charchannel0,name=vdagent -device
> virtserialport,bus=virtio-serial0.0,nr=1,chardev=charchannel0,id=chann
> el0,
> name=com.redhat.spice.0 -usb -device usb-tablet,id=input0 -device
> virtio-balloon-pci,id=balloon0,bus=pci.0,multifunction=on,addr=0x4.0x0
> -cdrom /home/vrozenfe/work/virtio-win-1.4.0.iso -snapshot -enable-kvm
>
> Drivers:
> Both, MS signed from RHEL6.2 virtio-win RPM, as well as compiled by
> myself with the sources from our internal repository (which contains
> absolutely the same code as in Yan's repository).
>
>
>
> ----- Original Message -----
> From: "Charles.Tsai-蔡清海-研究發展部" <charles.tsai at cloudena.com>
> To: "Vadim Rozenfeld" <vrozenfe at redhat.com>
> Cc: "Michael Roth" <mdroth at linux.vnet.ibm.com>, "Stefan Hajnoczi"
> <stefanha at gmail.com>, spice-devel at lists.freedesktop.org, "Alex
> Huang-黃必賢-研究發展部" <alex.huang at cloudena.com>, "Alon Levy"
> <alevy at redhat.com>, "qemu-devel" <qemu-devel at nongnu.org>, "Paul
> Lu-盧偉智-研究發展部" <paul.lu at cloudena.com> Sent: Monday, February 6, 2012
> 3:08:55 PM
> Subject: RE: [Qemu-devel] [Spice-devel] Vioserial of Windows guest OS
> on Qemu 0.15
>
> Vadim,
>
> I did the same test again today and no luck to made it work.
> Let us what you find since we might have missed some points when we
> did the test.
>
>
> -----Original Message-----
> From: Vadim Rozenfeld [mailto:vrozenfe at redhat.com]
> Sent: Sunday, February 05, 2012 2:14 AM
> To: Charles.Tsai-蔡清海-研究發展部
> Cc: Michael Roth; Stefan Hajnoczi; spice-devel at lists.freedesktop.org;
> Alex
> Huang-黃必賢-研究發展部; Alon Levy; qemu-devel; Paul Lu-盧偉智-研究發展部 Subject: Re:
> [Qemu-devel] [Spice-devel] Vioserial of Windows guest OS on Qemu 0.15
>
> Thanks,
> I'll check this problem.
> Vadim.
>
> ----- Original Message -----
> From: "Charles.Tsai-蔡清海-研究發展部" <charles.tsai at cloudena.com>
> To: "Charles.Tsai-蔡清海-研究發展部" <charles.tsai at cloudena.com>, "Vadim Rozenfeld"
> <vrozenfe at redhat.com> Cc: "Michael Roth" <mdroth at linux.vnet.ibm.com>,
> "Stefan Hajnoczi" <stefanha at gmail.com>,
> spice-devel at lists.freedesktop.org,
> "Alex Huang-黃必賢-研究發展部" <alex.huang at cloudena.com>, "Alon Levy"
> <alevy at redhat.com>, "qemu-devel" <qemu-devel at nongnu.org>, "Paul
> Lu-盧偉智-研究發展部" <paul.lu at cloudena.com> Sent: Saturday, February 4, 2012
> 5:39:26 AM
> Subject: RE: [Qemu-devel] [Spice-devel] Vioserial of Windows guest OS
> on Qemu 0.15
>
> Vadim,
>
> We tested the free build driver on 32-bit Windows 7 and the symptom
> was the same. In other words, the latest driver source from
> https://github.com/YanVugenfirer/ is buggy and it was not workable at all.
>
>
>
> -----Original Message-----
> From: Charles.Tsai-蔡清海-研究發展部
> Sent: Friday, February 03, 2012 12:01 PM
> To: 'Vadim Rozenfeld'
> Cc: Michael Roth; Stefan Hajnoczi; spice-devel at lists.freedesktop.org;
> Alex
> Huang-黃必賢-研究發展部; Alon Levy; qemu-devel; Paul Lu-盧偉智-研究發展部 Subject: RE:
> [Qemu-devel] [Spice-devel] Vioserial of Windows guest OS on Qemu 0.15
>
> Vadim,
>
> I downloaded the latest Windows guest driver code from
> (https://github.com/YanVugenfirer/) and built the test binary driver code.
> When I tested the release build Vioserial driver on 64-bit Windows 7,
> the driver seemed to wait for something to happen and the update
> driver Windows dialog simply just stayed in busy state. Finally, the
> Windows system entered a busy loop. However, if I tested the debugging
> build driver, the driver could be installed. But it took for a long
> time to complete.
>
> Our installed Qemu is 1.0. Is there Qemu build requirement so that we
> can verify the vioserial driver? From my test, the latest code from
> (https://github.com/YanVugenfirer/) seemed to be worst than the one we
> tested before. Let me know if we did anything wrong.
>
>
> -----Original Message-----
> From: Vadim Rozenfeld [mailto:vrozenfe at redhat.com]
> Sent: Friday, January 20, 2012 8:48 PM
> To: Charles.Tsai-蔡清海-研究發展部
> Cc: Michael Roth; Stefan Hajnoczi; spice-devel at lists.freedesktop.org;
> Alex
> Huang-黃必賢-研究發展部; Alon Levy; qemu-devel Subject: Re: [Qemu-devel]
> [Spice-devel] Vioserial of Windows guest OS on Qemu 0.15
>
> This code is slightly buggy.
> Please try Yan's repository
> at github (https://github.com/YanVugenfirer/).
> I believe that the most critical changes have been merged already by
> Yan into this public repository. I will ask to update binaries and
> sources at fedoraproject site as well.
>
> Best regards,
> Vadim.
>
>
> ----- Original Message -----
> From: "Charles.Tsai-蔡清海-研究發展部" <charles.tsai at cloudena.com>
> To: "Vadim Rozenfeld" <vrozenfe at redhat.com>
> Cc: "Michael Roth" <mdroth at linux.vnet.ibm.com>, "Stefan Hajnoczi"
> <stefanha at gmail.com>, spice-devel at lists.freedesktop.org, "Alex
> Huang-黃必賢-研究發展部" <alex.huang at cloudena.com>, "Alon Levy"
> <alevy at redhat.com>, "qemu-devel" <qemu-devel at nongnu.org> Sent: Friday,
> January 20, 2012 3:25:51 AM
> Subject: RE: [Qemu-devel] [Spice-devel] Vioserial of Windows guest OS
> on Qemu 0.15
>
> Vadim,
>
> We downloaded the driver source from the following website.
> ===========================================================
> wget --no-check-certificate
> https://alt.fedoraproject.org/pub/alt/virtio-win/latest/images/src/vir
> tio-
> win-prewhql-0.1-15-sources.zip
>
> -----Original Message-----
> From: Vadim Rozenfeld [mailto:vrozenfe at redhat.com]
> Sent: Thursday, January 19, 2012 8:25 PM
> To: Charles.Tsai-蔡清海-研究發展部
> Cc: Michael Roth; Stefan Hajnoczi; spice-devel at lists.freedesktop.org;
> Alex
> Huang-黃必賢-研究發展部; Alon Levy; qemu-devel Subject: Re: [Qemu-devel]
> [Spice-devel] Vioserial of Windows guest OS on Qemu 0.15
>
> Just to be sure that we are on the same page:
> could you tell me about the origin of the source?
> Is it the latest from the Yan's repository at github.com?
>
> ----- Original Message -----
> From: "Charles.Tsai-蔡清海-研究發展部" <charles.tsai at cloudena.com>
> To: "Vadim Rozenfeld" <vrozenfe at redhat.com>
> Cc: "Michael Roth" <mdroth at linux.vnet.ibm.com>, "Stefan Hajnoczi"
> <stefanha at gmail.com>, spice-devel at lists.freedesktop.org, "Alex
> Huang-黃必賢-研究發展部" <alex.huang at cloudena.com>, "Alon Levy"
> <alevy at redhat.com>, "qemu-devel" <qemu-devel at nongnu.org> Sent:
> Thursday, January 19, 2012 12:06:16 PM
> Subject: RE: [Qemu-devel] [Spice-devel] Vioserial of Windows guest OS
> on Qemu 0.15
>
> Vadim,
>
> We built it from the driver source. Up to this moment, we always use
> the same binary to test Qemu.
>
>
> -----Original Message-----
> From: Vadim Rozenfeld [mailto:vrozenfe at redhat.com]
> Sent: Thursday, January 19, 2012 5:39 PM
> To: Charles.Tsai-蔡清海-研究發展部
> Cc: Michael Roth; Stefan Hajnoczi; spice-devel at lists.freedesktop.org;
> Alex
> Huang-黃必賢-研究發展部; Alon Levy; qemu-devel Subject: RE: [Qemu-devel]
> [Spice-devel] Vioserial of Windows guest OS on Qemu 0.15
>
> On Thu, 2012-01-19 at 16:33 +0800, Charles.Tsai-蔡清海-研究發展部 wrote:
> > Vadim,
> >
> > It is SMP system.
>
> What about vioserial driver itself?
> did you build it from sources or is
> it one, available through RHEL channels?
>
> > -----Original Message-----
> > From: Vadim Rozenfeld [mailto:vrozenfe at redhat.com]
> > Sent: Thursday, January 19, 2012 3:58 PM
> > To: Charles.Tsai-蔡清海-研究發展部
> > Cc: Michael Roth; Stefan Hajnoczi;
> > spice-devel at lists.freedesktop.org;
> > Alex Huang-黃必賢-研究發展部; Alon Levy; qemu-devel
> > Subject: RE: [Qemu-devel] [Spice-devel] Vioserial of Windows guest
> > OS on Qemu 0.15
> >
> > On Thu, 2012-01-19 at 09:41 +0800, Charles.Tsai-蔡清海-研究發展部 wrote:
> > > Vadim,
> > >
> > > I tested on Qemu 1.0.50. and found the VioSerial driver had
> > > problem to install on 64-bit Win7 guest. During the driver
> > > installation, the system hung after the driver being installed.
> > > After I rebooted the guest OS, the Vioserial driver work. The hang
> > > system seemed to be found only during the driver installation.
> >
> > On UP or SMP system?
> >
> > > -----Original Message-----
> > > From: Vadim Rozenfeld [mailto:vrozenfe at redhat.com]
> > > Sent: Wednesday, January 18, 2012 4:57 AM
> > > To: Michael Roth
> > > Cc: Charles.Tsai-蔡清海-研究發展部; Stefan Hajnoczi;
> > > spice-devel at lists.freedesktop.org; Alex Huang-黃必賢-研究發展部; Alon
> > > Levy; qemu-devel
> > > Subject: Re: [Qemu-devel] [Spice-devel] Vioserial of Windows guest
> > > OS on Qemu 0.15
> > >
> > > On Mon, 2012-01-16 at 19:50 -0600, Michael Roth wrote:
> > > > On 01/15/2012 08:02 PM, Charles.Tsai-蔡清海-研究發展部 wrote:
> > > > > Vadim,
> > > > >
> > > > > Thank you for your prompt reply. Here are the information for
> > > > > our test case.
> > > > >
> > > > >
> > > > > 1) we use the following command line to launch the guest OS
> > > > >
> > > > >
> > > > > /usr/bin/kvm -S -M pc-0.14 -enable-kvm -m 1024 -smp
> > > > > 1,sockets=1,cores=1,threads=1 -name win_xp -uuid
> > > > > d9388815-ddd3-c38e-33c2-a9d5fcc7a775 -nodefconfig -nodefaults
> > > > > -chardev
> > > > > socket,id=charmonitor,path=/var/lib/libvirt/qemu/win_xp.monito
> > > > > r,
> > > > > se rv er,nowait -mon
> > > > > chardev=charmonitor,id=monitor,mode=readline
> > > > > -rtc base=localtime
> > > > > -device
> > > > > virtio-serial-pci,id=virtio-serial0,bus=pci.0,multifunction=on
> > > > > ,a
> > > > > dd
> > > > > r=
> > > > > 0x5.0x0 -drive
> > > > > file=/media/Images/Windows-XP.img,if=none,id=drive-ide0-0-0,fo
> > > > > rm
> > > > > at
> > > > > =r
> > > > > aw -device
> > > > > ide-drive,bus=ide.0,unit=0,drive=drive-ide0-0-0,id=ide0-0-0,bo
> > > > > ot
> > > > > in
> > > > > de
> > > > > x=1
> > > > > -netdev tap,fd=17,id=hostnet0
> > > > > -device
> > > > > rtl8139,netdev=hostnet0,id=net0,mac=52:54:00:e8:dc:b1,bus=pci.
> > > > > 0,
> > > > > mu
> > > > > lt
> > > > > ifunction=on,addr=0x3.0x0
> > > > > -chardev pty,id=charserial0
> > > > > -device isa-serial,chardev=charserial0,id=serial0
> > > > > -chardev spicevmc,id=charchannel0,name=vdagent
> > > > > -device
> > > > > virtserialport,bus=virtio-serial0.0,nr=1,chardev=charchannel0,
> > > > > id
> > > > > =c
> > > > > ha
> > > > > nnel0,name=com.redhat.spice.0
> > > > > -usb -device usb-tablet,id=input0 -spice
> > > > > port=5900,addr=0.0.0.0,disable-ticketing
> > > > > -vga qxl -global qxl-vga.vram_size=67108864 -device
> > > > > virtio-balloon-pci,id=balloon0,bus=pci.0,multifunction=on,addr
> > > > > =0
> > > > > x4
> > > > > .0
> > > > > x0
> > > > >
> > > > >
> > > > >
> > > > > 2). In Guest Windows XP OS
> > > > >
> > > > >
> > > > > When the following callback function of the vioserial device
> > > > > is called in guest OS. The allocated resources is empty.
> > > > >
> > > > >
> > > > > VIOSerialEvtDevicePrepareHardware() ---This function is to get
> > > > > the I/O address of the vioserial device and map the physical
> > > > > address to the logical address space.
> > > > >
> > > > > I added the following trace and the value of nListSize is ZERO.
> > > > > TraceEvents(TRACE_LEVEL_INFORMATION, DBG_PNP, "%s
> > > > > (nListSize=%d)\n", __FUNCTION__,nListSize);
> > > > >
> > > > >
> > > > > So far, we have tested Qemu 0.14 without any problem but Qemu
> > > > > 0.15 seemed to be broken in vioserial device. Let me know if
> > > > > you need further information. Thanks.
> > > >
> > > > Hi Charles,
> > > >
> > > > What versions of the virtio-win drivers are you using?
> > > >
> > > > I've been testing virtio-serial on windows using the latest
> > > > qemu.git (1.0). Linux guests work fine, but I've been having
> > > > various issues with Windows 7, XP SP3, and Server 2008 R1. XP
> > > > SP3
> > >
> > > > works intermittently for me using RHEL6.0 virtio-win, as well as
> > > > the
drivers at:
> > > I have seen some virtio serial port initialization problems on 1.0.50.
> > > Will try to look into this problem in the following week(s).
> > >
> > > > http://alt.fedoraproject.org/pub/alt/virtio-win/latest/images/bi
> > > > n/
> > > >
> > > > But I've been getting a mix of issues such as guest hangs,
> > > > vioser-test failing to enumerate any virtio-serial devices, or
> > > > various non-critical error messages from qemu that seem to
> > > > coincide with the channel being open/closed (occasionally
> > > > resulting in the channel becoming unresponsive).
> > > >
> > > > Do any of these seem similar to the behaviour you're seeing? If
> > > > so I'll see if the issues go away on 0.14.0 and follow-up with a
> > > > git bisect.
More information about the Spice-devel
mailing list