[Spice-devel] [Users] failed nestd vm only with spice and not vnc
Gianluca Cecchi
gianluca.cecchi at gmail.com
Wed Feb 5 01:00:43 PST 2014
Hello,
I revamp this thread putting a subject more in line with the real problem.
Previous thread subject was
"
unable to start vm in 3.3 and f19 with gluster
"
and began here on ovirt users mailing list:
http://lists.ovirt.org/pipermail/users/2013-September/016628.html
Now I updated all to final 3.3.3 and I see that the problem is here yet.
So now I have updated Fedora 19 hosts that are VMs (virtual hw version
9) inside vSphere infra version 5.1.
CPU of ESX host is E7-4870 and cluster in oVirt is defined as "Intel
Nehalem Family"
On oVirt host VM
[root at ovnode01 qemu]# rpm -q libvirt qemu-kvm
libvirt-1.0.5.9-1.fc19.x86_64
qemu-kvm-1.4.2-15.fc19.x86_64
[root at ovnode01 qemu]# uname -r
3.12.9-201.fc19.x86_64
flags of cpuinfo:
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
mca cmov pat pse36 clflush dts mmx fxsr sse sse2 ss syscall nx rdtscp
lm constant_tsc arch_perfmon pebs bts nopl xtopology tsc_reliable
nonstop_tsc aperfmperf pni monitor vmx ssse3 cx16 sse4_1 sse4_2 x2apic
popcnt lahf_lm ida arat epb dtherm tpr_shadow vnmi ept vpid
[root at ovnode01 ~]# vdsClient -s localhost getVdsCapabilities
HBAInventory = {'FC': [], 'iSCSI': [{'InitiatorName':
'iqn.1994-05.com.redhat:6344c23973df'}]}
ISCSIInitiatorName = 'iqn.1994-05.com.redhat:6344c23973df'
bondings = {'bond0': {'addr': '',
'cfg': {},
'hwaddr': '32:5c:6a:20:cd:21',
'ipv6addrs': [],
'mtu': '1500',
'netmask': '',
'slaves': []}}
bridges = {'ovirtmgmt': {'addr': '192.168.33.41',
'cfg': {'BOOTPROTO': 'none',
'DEFROUTE': 'yes',
'DELAY': '0',
'DEVICE': 'ovirtmgmt',
'GATEWAY': '192.168.33.15',
'IPADDR': '192.168.33.41',
'NETMASK': '255.255.255.0',
'NM_CONTROLLED': 'no',
'ONBOOT': 'yes',
'STP': 'no',
'TYPE': 'Bridge'},
'gateway': '192.168.33.15',
'ipv6addrs': ['fe80::250:56ff:fe9f:686b/64'],
'ipv6gateway': '::',
'mtu': '1500',
'netmask': '255.255.255.0',
'ports': ['eth0', 'vnet1'],
'stp': 'off'},
'vlan172': {'addr': '',
'cfg': {'DEFROUTE': 'no',
'DELAY': '0',
'DEVICE': 'vlan172',
'NM_CONTROLLED': 'no',
'ONBOOT': 'yes',
'STP': 'no',
'TYPE': 'Bridge'},
'gateway': '0.0.0.0',
'ipv6addrs': ['fe80::250:56ff:fe9f:3b86/64'],
'ipv6gateway': '::',
'mtu': '1500',
'netmask': '',
'ports': ['ens256.172', 'vnet0'],
'stp': 'off'}}
clusterLevels = ['3.0', '3.1', '3.2', '3.3']
cpuCores = '4'
cpuFlags =
'fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,mmx,fxsr,sse,sse2,ss,syscall,nx,rdtscp,lm,constant_tsc,arch_perfmon,pebs,bts,nopl,xtopology,tsc_reliable,nonstop_tsc,aperfmperf,pni,monitor,vmx,ssse3,cx16,sse4_1,sse4_2,x2apic,popcnt,lahf_lm,ida,arat,epb,dtherm,tpr_shadow,vnmi,ept,vpid,model_Nehalem,model_Conroe,model_coreduo,model_core2duo,model_Penryn,model_n270'
cpuModel = 'Intel(R) Xeon(R) CPU E7- 4870 @ 2.40GHz'
cpuSockets = '4'
cpuSpeed = '2394.000'
cpuThreads = '4'
emulatedMachines = ['pc',
'q35',
'isapc',
'pc-0.10',
'pc-0.11',
'pc-0.12',
'pc-0.13',
'pc-0.14',
'pc-0.15',
'pc-1.0',
'pc-1.1',
'pc-1.2',
'pc-1.3',
'none']
guestOverhead = '65'
hooks = {}
kvmEnabled = 'true'
lastClient = '127.0.0.1'
lastClientIface = 'lo'
management_ip = '0.0.0.0'
memSize = '16050'
netConfigDirty = 'False'
networks = {'ovirtmgmt': {'addr': '192.168.33.41',
'bridged': True,
'cfg': {'BOOTPROTO': 'none',
'DEFROUTE': 'yes',
'DELAY': '0',
'DEVICE': 'ovirtmgmt',
'GATEWAY': '192.168.33.15',
'IPADDR': '192.168.33.41',
'NETMASK': '255.255.255.0',
'NM_CONTROLLED': 'no',
'ONBOOT': 'yes',
'STP': 'no',
'TYPE': 'Bridge'},
'gateway': '192.168.33.15',
'iface': 'ovirtmgmt',
'ipv6addrs': ['fe80::250:56ff:fe9f:686b/64'],
'ipv6gateway': '::',
'mtu': '1500',
'netmask': '255.255.255.0',
'ports': ['eth0', 'vnet1'],
'qosInbound': '',
'qosOutbound': '',
'stp': 'off'},
'vlan172': {'addr': '',
'bridged': True,
'cfg': {'DEFROUTE': 'no',
'DELAY': '0',
'DEVICE': 'vlan172',
'NM_CONTROLLED': 'no',
'ONBOOT': 'yes',
'STP': 'no',
'TYPE': 'Bridge'},
'gateway': '0.0.0.0',
'iface': 'vlan172',
'ipv6addrs': ['fe80::250:56ff:fe9f:3b86/64'],
'ipv6gateway': '::',
'mtu': '1500',
'netmask': '',
'ports': ['ens256.172', 'vnet0'],
'qosInbound': '',
'qosOutbound': '',
'stp': 'off'}}
nics = {'ens224': {'addr': '192.168.230.31',
'cfg': {'BOOTPROTO': 'static',
'DEVICE': 'ens224',
'HWADDR': '00:50:56:9F:3C:B0',
'IPADDR': '192.168.230.31',
'NETMASK': '255.255.255.0',
'NM_CONTROLLED': 'no',
'ONBOOT': 'yes',
'TYPE': 'Ethernet'},
'hwaddr': '00:50:56:9f:3c:b0',
'ipv6addrs': ['fe80::250:56ff:fe9f:3cb0/64'],
'mtu': '1500',
'netmask': '255.255.255.0',
'speed': 10000},
'ens256': {'addr': '',
'cfg': {'DEVICE': 'ens256',
'HWADDR': '00:50:56:9f:3b:86',
'MTU': '1500',
'NM_CONTROLLED': 'no',
'ONBOOT': 'yes',
'STP': 'no'},
'hwaddr': '00:50:56:9f:3b:86',
'ipv6addrs': ['fe80::250:56ff:fe9f:3b86/64'],
'mtu': '1500',
'netmask': '',
'speed': 10000},
'eth0': {'addr': '',
'cfg': {'BRIDGE': 'ovirtmgmt',
'DEVICE': 'eth0',
'HWADDR': '00:50:56:9f:68:6b',
'MTU': '1500',
'NM_CONTROLLED': 'no',
'ONBOOT': 'yes',
'STP': 'no'},
'hwaddr': '00:50:56:9f:68:6b',
'ipv6addrs': ['fe80::250:56ff:fe9f:686b/64'],
'mtu': '1500',
'netmask': '',
'speed': 10000}}
operatingSystem = {'name': 'Fedora', 'release': '6', 'version': '19'}
packages2 = {'kernel': {'buildtime': 1391006675.0,
'release': '201.fc19.x86_64',
'version': '3.12.9'},
'libvirt': {'buildtime': 1389924902,
'release': '1.fc19',
'version': '1.0.5.9'},
'mom': {'buildtime': 1385055339, 'release':
'6.fc19', 'version': '0.3.2'},
'qemu-img': {'buildtime': 1387388596,
'release': '15.fc19',
'version': '1.4.2'},
'qemu-kvm': {'buildtime': 1387388596,
'release': '15.fc19',
'version': '1.4.2'},
'spice-server': {'buildtime': 1383130020,
'release': '3.fc19',
'version': '0.12.4'},
'vdsm': {'buildtime': 1391430691, 'release':
'3.fc19', 'version': '4.13.3'}}
reservedMem = '321'
software_revision = '3'
software_version = '4.13'
supportedENGINEs = ['3.0', '3.1', '3.2', '3.3']
supportedProtocols = ['2.2', '2.3']
uuid = '421F7170-C703-34E3-9628-4588D841F8B1'
version_name = 'Snow Man'
vlans = {'ens256.172': {'addr': '',
'cfg': {'BRIDGE': 'vlan172',
'DEVICE': 'ens256.172',
'NM_CONTROLLED': 'no',
'ONBOOT': 'yes',
'STP': 'no',
'VLAN': 'yes'},
'iface': 'ens256',
'ipv6addrs': ['fe80::250:56ff:fe9f:3b86/64'],
'mtu': '1500',
'netmask': '',
'vlanid': 172}}
vmTypes = ['kvm']
I have a pre-booted VM that is configured as VNC.
As soon as I start another VM (CentOS 6.4) defined as spice console
all the two go into paused mode
In qemulog of spice VM I have
2014-02-05 08:05:45.965+0000: starting up
LC_ALL=C PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin
QEMU_AUDIO_DRV=spice /usr/bin/q
emu-kvm -name C2prealloc -S -machine pc-1.0,accel=kvm,usb=off -cpu
Nehalem -m 1024 -smp 1,sockets=1,cores=1,threads=1 -uuid
1107ce34-46e6-4989-a5cf-de601ea71cae -smbios
type=1,manufacturer=oVirt,product=oVirt
Node,version=19-6,serial=421F7170-C703-34E3-9628-4588D841F8B1,uuid=1107ce34-46e6-4989-a5cf-de601ea71cae
-no-user-config -nodefaults -chardev
socket,id=charmonitor,path=/var/lib/libvirt/qemu/C2prealloc.monitor,server,nowait
-mon chardev=charmonitor,id=monitor,mode=control -rtc
base=2014-02-05T08:05:45,driftfix=slew -no-shutdown -device
piix3-usb-uhci,id=usb,bus=pci.0,addr=0x1.0x2 -device
virtio-serial-pci,id=virtio-serial0,bus=pci.0,addr=0x4 -drive
if=none,id=drive-ide0-1-0,readonly=on,format=raw,serial= -device
ide-cd,bus=ide.1,unit=0,drive=drive-ide0-1-0,id=ide0-1-0 -drive
file=/rhev/data-center/mnt/glusterSD/ovnode01:gv01/20042e7b-0929-48ca-ad40-2a2aa22f0689/images/e8a52eea-5531-4d12-8747-061c2136b6fd/14707e58-aedf-4059-a815-605a0df4b396,if=none,id=drive-virtio-disk0,format=raw,serial=e8a52eea-5531-4d12-8747-061c2136b6fd,cache=none,werror=stop,rerror=stop,aio=threads
-device virtio-blk-pci,scsi=off,bus=pci.0,addr=0x5,drive=drive-virtio-disk0,id=virtio-disk0,bootindex=1
-netdev tap,fd=29,id=hostnet0,vhost=on,vhostfd=30 -device
virtio-net-pci,netdev=hostnet0,id=net0,mac=00:1a:4a:bb:9f:19,bus=pci.0,addr=0x3
-chardev socket,id=charchannel0,path=/var/lib/libvirt/qemu/channels/1107ce34-46e6-4989-a5cf-de601ea71cae.com.redhat.rhevm.vdsm,server,nowait
-device virtserialport,bus=virtio-serial0.0,nr=1,chardev=charchannel0,id=channel0,name=com.redhat.rhevm.vdsm
-chardev socket,id=charchannel1,path=/var/lib/libvirt/qemu/channels/1107ce34-46e6-4989-a5cf-de601ea71cae.org.qemu.guest_agent.0,server,nowait
-device virtserialport,bus=virtio-serial0.0,nr=2,chardev=charchannel1,id=channel
1,name=org.qemu.guest_agent.0 -chardev
spicevmc,id=charchannel2,name=vdagent -device
virtserialport,bus=virtio-serial0.0,nr=3,chardev=charchannel2,id=channel2,name=com.redhat.spice.0
-spice tls-port=5901,addr=0,x509-dir=/etc/pki/vdsm/libvirt-spice,tls-channel=main,tls-channel=display,tls-channel=inputs,tls-channel=cursor,tls-channel=playback,tls-channel=record,tls-channel=smartcard,tls-channel=usbredir,seamless-migration=on
-k en-us -vga qxl -global qxl-vga.ram_size=67108864 -global
qxl-vga.vram_size=67108864 -device
virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x6
KVM: unknown exit, hardware reason 3
EAX=00000037 EBX=00006e44 ECX=0000001a EDX=00000511
ESI=00000000 EDI=00006df8 EBP=00006e08 ESP=00006dd4
EIP=3ffe1464 EFL=00000017 [----APC] CPL=0 II=0 A20=1 SMM=0 HLT=0
ES =0010 00000000 ffffffff 00c09300 DPL=0 DS [-WA]
CS =0008 00000000 ffffffff 00c09b00 DPL=0 CS32 [-RA]
SS =0010 00000000 ffffffff 00c09300 DPL=0 DS [-WA]
DS =0010 00000000 ffffffff 00c09300 DPL=0 DS [-WA]
FS =0010 00000000 ffffffff 00c09300 DPL=0 DS [-WA]
GS =0010 00000000 ffffffff 00c09300 DPL=0 DS [-WA]
LDT=0000 00000000 0000ffff 00008200 DPL=0 LDT
TR =0000 00000000 0000ffff 00008b00 DPL=0 TSS32-busy
GDT= 000fd3a8 00000037
IDT= 000fd3e6 00000000
CR0=00000011 CR2=00000000 CR3=00000000 CR4=00000000
DR0=0000000000000000 DR1=0000000000000000 DR2=0000000000000000
DR3=0000000000000000
DR6=00000000ffff0ff0 DR7=0000000000000400
EFER=0000000000000000
Code=eb be 83 c4 08 5b 5e 5f 5d c3 89 c1 ba 11 05 00 00 eb 01 ec <49>
83 f9 ff 75 f9 c3 57 56 53 89 c3 8b b0 84 00 00 00 39 ce 77 1e 89 d7
0f b7 80 8c 00 00
In messages I get when I start the spice VM:
Feb 5 09:05:46 ovnode01 vdsm vm.Vm WARNING
vmId=`1107ce34-46e6-4989-a5cf-de601ea71cae`::_readPauseCode
unsupported by libvirt vm
In VNC VM qemu.log, when I started it yestaerday:
2014-02-04 23:56:48.635+0000: starting up
LC_ALL=C PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin
QEMU_AUDIO_DRV=none /usr/bin/qemu-kvm -name C6 -S -machine
pc-1.0,accel=kvm,usb=off -cpu Nehalem -m 2048 -smp
1,sockets=1,cores=1,threads=1 -uuid
409c5dbe-5e70-40de-bf73-46ef484ea2d7 -smbios
type=1,manufacturer=oVirt,product=oVirt
Node,version=19-6,serial=421F7170-C703-34E3-9628-4588D841F8B1,uuid=409c5dbe-5e70-40de-bf73-46ef484ea2d7
-no-user-config -nodefaults -chardev
socket,id=charmonitor,path=/var/lib/libvirt/qemu/C6.monitor,server,nowait
-mon chardev=charmonitor,id=monitor,mode=control -rtc
base=2014-02-04T23:56:48,driftfix=slew -no-shutdown -device
piix3-usb-uhci,id=usb,bus=pci.0,addr=0x1.0x2 -device
virtio-serial-pci,id=virtio-serial0,bus=pci.0,addr=0x4 -drive
if=none,id=drive-ide0-1-0,readonly=on,format=raw,serial= -device
ide-cd,bus=ide.1,unit=0,drive=drive-ide0-1-0,id=ide0-1-0 -drive
file=/rhev/data-center/mnt/glusterSD/ovnode01:gv01/20042e7b-0929-48ca-ad40-2a2aa22f0689/images/d004045e-620b-4d90-8a7f-6c6d26393a08/dff09892-bc60-4de5-85c0-2a1fa215a161,if=none,id=drive-virtio-disk0,format=raw,serial=d004045e-620b-4d90-8a7f-6c6d26393a08,cache=none,werror=stop,rerror=stop,aio=threads
-device virtio-blk-pci,scsi=off,bus=pci.0,addr=0x5,drive=drive-virtio-disk0,id=virtio-disk0,bootindex=1
-netdev tap,fd=27,id=hostnet0,vhost=on,vhostfd=28 -device
virtio-net-pci,netdev=hostnet0,id=net0,mac=00:1a:4a:bb:9f:10,bus=pci.0,addr=0x3
-chardev socket,id=charchannel0,path=/var/lib/libvirt/qemu/channels/409c5dbe-5e70-40de-bf73-46ef484ea2d7.com.redhat.rhevm.vdsm,server,nowait
-device virtserialport,bus=virtio-serial0.0,nr=1,chardev=charchannel0,id=channel0,name=com.redhat.rhevm.vdsm
-chardev socket,id=charchannel1,path=/var/lib/libvirt/qemu/channels/409c5dbe-5e70-40de-bf73-46ef484ea2d7.org.qemu.guest_agent.0,server,nowait
-device virtserialport,bus=virtio-serial0.0,nr=2,chardev=charchannel1,id=channel1,name=org.qemu.guest_agent.0
-device usb-tablet,id=input0 -vnc 0:0,password -k en-us -vga cirrus
-device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x6
when I start the spice one
KVM: unknown exit, hardware reason 3
EAX=00000011 EBX=0000ffea ECX=00000000 EDX=000fc5b9
ESI=000d7c2a EDI=00000000 EBP=00000000 ESP=00006f80
EIP=0000c489 EFL=00000006 [-----P-] CPL=0 II=0 A20=1 SMM=0 HLT=0
ES =0000 00000000 ffffffff 00809300 DPL=0 DS16 [-WA]
CS =f000 000f0000 ffffffff 00809b00 DPL=0 CS16 [-RA]
SS =0000 00000000 ffffffff 00809300 DPL=0 DS16 [-WA]
DS =0000 00000000 ffffffff 00809300 DPL=0 DS16 [-WA]
FS =0000 00000000 ffffffff 00809300 DPL=0 DS16 [-WA]
GS =0000 00000000 ffffffff 00809300 DPL=0 DS16 [-WA]
LDT=0000 00000000 0000ffff 00008200 DPL=0 LDT
TR =0000 00000000 0000ffff 00008b00 DPL=0 TSS32-busy
GDT= 000fd3a8 00000037
IDT= 000fd3e6 00000000
CR0=00000011 CR2=00000000 CR3=00000000 CR4=00000000
DR0=0000000000000000 DR1=0000000000000000 DR2=0000000000000000
DR3=0000000000000000
DR6=00000000ffff0ff0 DR7=0000000000000400
EFER=0000000000000000
Code=01 1e e0 d3 2e 0f 01 16 a0 d3 0f 20 c0 66 83 c8 01 0f 22 c0 <66>
ea 91 c4 0f 00 08 00 b8 10 00 00 00 8e d8 8e c0 8e d0 8e e0 8e e8 89
c8 ff e2 89 c1 b8
Thanks in advance,
Gianluca
On Thu, Oct 3, 2013 at 2:54 PM, Itamar Heim <iheim at redhat.com> wrote:
> On 10/03/2013 01:21 AM, Gianluca Cecchi wrote:
>>
>> On Wed, Oct 2, 2013 at 9:16 PM, Itamar Heim wrote:
>>>
>>> On 10/02/2013 12:57 AM, Gianluca Cecchi wrote:
>>>>
>>>>
>>>> Today I was able to work again on this matter and it seems related to
>>>> spice
>>>> Every time I start the VM (that is defined with spice) it goes in
>>>
>>>
>>>
>>> and this doesn't happen if the VM is defined with vnc?
>>
>>
>> No, reproduced both from oVirt and through virsh.
>> with spice defined in boot options or in xml (for virsh) the vm
>> remains in paused state and after a few minutes it seems the node
>> hangs...
>> with vnc the VM goes in runnign state
>> I'm going to put same config on 2 physical nodes with only local
>> storage and see what happens and report...
>>
>> Gianluca
>>
>
> adding spice-devel mailing list as the VM only hangs if started with spice
> and not with vnc, from virsh as well.
More information about the Spice-devel
mailing list