[Spice-devel] xspice multiple monitor

[My Work]

You can follow any responses to explain how to properly use 
spice-vdagent(d) Xspice?
I did not realize until the end how to do it
On 02.03.15 19:00, Uri Lublin wrote:
> On 03/02/2015 12:45 PM, My Work wrote:
>> Hi guys. I need you help, i have installed on my remote server Xorg with
>> support spice protocol and i need to add support for spice multiple
>> monitors, how i can do it and change my xorg.conf file for this????
>> I configured my xorg.conf like this:
>
>
> Hi "My Work",
>
> With Xspice and Linux X qxl driver, it's easier if only
> a single device is used. It supports (given enough memory)
> up to 4 monitors per device.
>
> See below for my suggestions on configuration file modifications.
>
>>
>> Section "ServerLayout"
>>          Identifier  "Layout1"
>>          Screen  1 "Screen1"
>>          Screen  2 "Screen2"
>>          InputDevice "MouseSpice" "CorePointer"
>>          InputDevice "KeyboardSpice" "CoreKeyboard"
>> EndSection
>>
>> Section "InputDevice"
>>      Identifier  "MouseSpice"
>>      Driver      "xspice pointer"
>> EndSection
>>
>> Section "InputDevice"
>>      Identifier  "KeyboardSpice"
>>      Driver      "xspice keyboard"
>> EndSection
>>
>> Section "Monitor"
>>          Identifier  "Monitor1"
>> EndSection
>>
>> Section "Monitor"
>>          Identifier  "Monitor2"
>> EndSection
>> /
>>
>> /Section "Device"
>>          Identifier "Card1"
>>          Driver     "spiceqxl"
>>          Option "SpicePort" "8901"
>>          Option "SpicePassword" "mypassword"
>>          Screen  0
>> EndSection
>>
>
> -------------------
> Remove this Section
>> Section "Device"
>>          Identifier "Card2"
>>          Driver     "spiceqxl"
>>          Screen  1
>> EndSection
>> /
> -------------------
>
>>
>> /Section "Screen"
>>          Identifier   "Screen1"
>>          Device       "Card1"
>>          Monitor      "Monitor1"
>>          DefaultDepth 24
>> EndSection
>>
>> Section "Screen"
>>          Identifier   "Screen2"
>
> Replace this
>>          Device       "Card2"
>
> with
>            Device       "Card1"
>
>
>>          Monitor      "Monitor2"
>>          DefaultDepth 24
>> EndSection/
>>
>>
>> How you can see, qxl enable only for one screen, but why i don't now,
>> help me please with this problem
>>
>> OS is Debian 8.0
>> version of kernel is 3.16.0-4-amd64
>> version of xorg is 1:7.7+7
>> version of spice driver is 0.1.3
>> version of xserver-xorg-video-qxl is 0.1.1-2+b1
>
>
> My OS is RHEL-6
> xorg, spice-server and xspice are built from git (with some minor 
> modifications). git describe shows:
> xorg-server-1.16.99.901-42-g3e7218a
> spice-v0.12.5-45-g69f3f86
> xf86-video-qxl-0.1.3-14-gbed5968 (Xspice)
>
> I'm running with spice-vdagent(d) connected to the Xspice session.
>
> After connecting with remote-viewer, click on menu: View -> Displays
> and check "Display 2"
>
> Hope that helps,
>     Uri.
>