[Spice-devel] [spice v13 14/29] server: Adjust the GStreamer encoder bit rate to the network
Francois Gouget
fgouget at codeweavers.com
Tue Apr 19 07:50:03 UTC 2016
The video encoder uses the client reports and/or notifications of
server frame drops as its feedback mechanisms. In particular it keeps
track of the maximum video margin and reduces the bit rate whenever the
margin goes below certain thresholds or decreases too sharply.
It uses these to figure out the lowest bit rate that causes negative
feedback, and the highest bit rate that allows a return to positive
feedbacks. It then works to narrow this range and settles on the lower
end once the spread has gone below a given threshold.
All the while it monitors the effective bit rate to ensure the target
bit rate does not grow significantly beyond what the GStreamer encoder
will produce: this avoids target bit rate 'bubbles' which would
invariably be followed by a bit rate crash with accompanying frame loss.
As soon as the network feedback indicates a significant degradation the
bit rate is lowered to minimize the risk of frame loss and/or long
freezes.
It also relies on the existing shaping of the GStreamer output bit rate
to minimize the pipeline reconfigurations.
Signed-off-by: Francois Gouget <fgouget at codeweavers.com>
---
server/gstreamer-encoder.c | 410 ++++++++++++++++++++++++++++++++++++++++++---
1 file changed, 384 insertions(+), 26 deletions(-)
diff --git a/server/gstreamer-encoder.c b/server/gstreamer-encoder.c
index 3291bf6..51ec4b8 100644
--- a/server/gstreamer-encoder.c
+++ b/server/gstreamer-encoder.c
@@ -51,6 +51,12 @@ typedef struct {
uint32_t size;
} SpiceGstFrameInformation;
+typedef enum SpiceGstBitRateStatus {
+ SPICE_GST_BITRATE_DECREASING,
+ SPICE_GST_BITRATE_INCREASING,
+ SPICE_GST_BITRATE_STABLE,
+} SpiceGstBitRateStatus;
+
typedef struct SpiceGstEncoder {
VideoEncoder base;
@@ -97,6 +103,13 @@ typedef struct SpiceGstEncoder {
GCond outbuf_cond;
VideoBuffer *outbuf;
+ /* The video bit rate. */
+ uint64_t video_bit_rate;
+
+ /* Don't bother changing the GStreamer bit rate if close enough. */
+# define SPICE_GST_VIDEO_BITRATE_MARGIN 0.05
+
+
/* ---------- Encoded frame statistics ---------- */
/* Should be >= than FRAME_STATISTICS_COUNT. This is also used to
@@ -130,7 +143,7 @@ typedef struct SpiceGstEncoder {
/* ---------- Encoder bit rate control ----------
*
- * GStreamer encoders don't follow the specified bit rate very
+ * GStreamer encoders don't follow the specified video_bit_rate very
* closely. These fields are used to ensure we don't exceed the desired
* stream bit rate, regardless of the GStreamer encoder's output.
*/
@@ -138,7 +151,7 @@ typedef struct SpiceGstEncoder {
/* The bit rate target for the outgoing network stream. (bits per second) */
uint64_t bit_rate;
- /* The minimum bit rate. */
+ /* The minimum bit rate / bit rate increment. */
# define SPICE_GST_MIN_BITRATE (128 * 1024)
/* The default bit rate. */
@@ -164,6 +177,89 @@ typedef struct SpiceGstEncoder {
/* How big of a margin to take to cover for latency jitter. */
# define SPICE_GST_LATENCY_MARGIN 0.1
+
+
+ /* ---------- Network bit rate control ----------
+ *
+ * State information for figuring out the optimal bit rate for the
+ * current network conditions.
+ */
+
+ /* The mm_time of the last bit rate change. */
+ uint32_t last_change;
+
+ /* How much to reduce the bit rate in case of network congestion. */
+# define SPICE_GST_BITRATE_CUT 2
+# define SPICE_GST_BITRATE_REDUCE (4.0 / 3.0)
+
+ /* Never increase the bit rate by more than this amount (bits per second). */
+# define SPICE_GST_BITRATE_MAX_STEP (1024 * 1024)
+
+ /* The maximum bit rate that one can maybe use without causing network
+ * congestion.
+ */
+ uint64_t max_bit_rate;
+
+ /* The last bit rate that let us recover from network congestion. */
+ uint64_t min_bit_rate;
+
+ /* Defines when the spread between max_bit_rate and min_bit_rate has been
+ * narrowed down enough. Note that this value should be large enough for
+ * min_bit_rate to allow recovery from network congestion in a reasonable
+ * time frame, and to absorb transient traffic spikes (potentially from
+ * other sources).
+ * This is also used as a multiplier for the video_bit_rate so it does
+ * not have to be changed too often.
+ */
+# define SPICE_GST_BITRATE_MARGIN SPICE_GST_BITRATE_REDUCE
+
+ /* Whether the bit rate was last decreased, increased or kept stable. */
+ SpiceGstBitRateStatus status;
+
+ /* The network bit rate control uses an AIMD scheme (Additive Increase,
+ * Multiplicative Decrease). The increment step depends on the spread
+ * between the minimum and maximum bit rates.
+ */
+ uint64_t bit_rate_step;
+
+ /* How often to increase the bit rate. */
+ uint32_t increase_interval;
+
+# define SPICE_GST_BITRATE_UP_INTERVAL (MSEC_PER_SEC * 2)
+# define SPICE_GST_BITRATE_UP_CLIENT_STABLE (MSEC_PER_SEC * 60 * 2)
+# define SPICE_GST_BITRATE_UP_SERVER_STABLE (MSEC_PER_SEC * 3600 * 4)
+# define SPICE_GST_BITRATE_UP_RESET_MAX (MSEC_PER_SEC * 30)
+
+
+ /* ---------- Client feedback ---------- */
+
+ /* TRUE if gst_encoder_client_stream_report() is being called. */
+ gboolean has_client_reports;
+
+ /* The margin is the amount of time between the reception of a piece of
+ * media data by the client and the time when it should be displayed.
+ * Increasing the bit rate increases the transmission time and thus
+ * reduces the margin.
+ */
+ int32_t last_video_margin;
+ int32_t max_video_margin;
+ uint32_t max_audio_margin;
+
+# define SPICE_GST_VIDEO_MARGIN_GOOD 0.75
+# define SPICE_GST_VIDEO_MARGIN_AVERAGE 0.5
+# define SPICE_GST_VIDEO_MARGIN_BAD 0.3
+
+# define SPICE_GST_VIDEO_DELTA_BAD 0.2
+# define SPICE_GST_VIDEO_DELTA_AVERAGE 0.15
+
+# define SPICE_GST_AUDIO_MARGIN_BAD 0.5
+# define SPICE_GST_AUDIO_VIDEO_RATIO 1.25
+
+
+ /* ---------- Server feedback ---------- */
+
+ /* How many frames were dropped by the server since the last encoded frame. */
+ uint32_t server_drops;
} SpiceGstEncoder;
@@ -355,6 +451,14 @@ static void add_frame(SpiceGstEncoder *encoder, uint32_t frame_mm_time,
/* ---------- Encoder bit rate control ---------- */
+static void set_video_bit_rate(SpiceGstEncoder *encoder, uint64_t bit_rate)
+{
+ if (abs(bit_rate - encoder->video_bit_rate) > encoder->video_bit_rate * SPICE_GST_VIDEO_BITRATE_MARGIN) {
+ encoder->video_bit_rate = bit_rate;
+ set_pipeline_changes(encoder, SPICE_GST_VIDEO_PIPELINE_BITRATE);
+ }
+}
+
static uint32_t get_min_playback_delay(SpiceGstEncoder *encoder)
{
/* Make sure the delay is large enough to send a large frame (typically
@@ -396,6 +500,12 @@ static void update_next_frame_mm_time(SpiceGstEncoder *encoder)
delay_ns = drops * period_ns + period_ns / 2;
if (delay_ns > SPICE_GST_MAX_PERIOD) {
+ /* Reduce the video bit rate so we don't have to drop so many frames. */
+ if (encoder->video_bit_rate > encoder->bit_rate * SPICE_GST_BITRATE_MARGIN) {
+ set_video_bit_rate(encoder, encoder->bit_rate * SPICE_GST_BITRATE_MARGIN);
+ } else {
+ set_video_bit_rate(encoder, encoder->bit_rate);
+ }
delay_ns = SPICE_GST_MAX_PERIOD;
}
encoder->next_frame_mm_time = get_last_frame_mm_time(encoder) + delay_ns / NSEC_PER_MILLISEC;
@@ -420,19 +530,165 @@ static uint64_t get_bit_rate_cap(SpiceGstEncoder *encoder)
return raw_frame_bits * get_source_fps(encoder) / 10;
}
-static void adjust_bit_rate(SpiceGstEncoder *encoder)
+static void set_bit_rate(SpiceGstEncoder *encoder, uint64_t bit_rate)
{
- if (encoder->bit_rate == 0) {
- /* Use the default value, */
- encoder->bit_rate = SPICE_GST_DEFAULT_BITRATE;
- } else if (encoder->bit_rate < SPICE_GST_MIN_BITRATE) {
- /* don't let the bit rate go too low */
+ if (bit_rate == 0) {
+ /* Use the default value */
+ bit_rate = SPICE_GST_DEFAULT_BITRATE;
+ }
+ if (bit_rate == encoder->bit_rate) {
+ return;
+ }
+ if (bit_rate < SPICE_GST_MIN_BITRATE) {
+ /* Don't let the bit rate go too low... */
encoder->bit_rate = SPICE_GST_MIN_BITRATE;
- } else {
+ } else if (bit_rate > encoder->bit_rate) {
/* or too high */
- encoder->bit_rate = MIN(encoder->bit_rate, get_bit_rate_cap(encoder));
+ bit_rate = MIN(bit_rate, get_bit_rate_cap(encoder));
+ }
+
+ if (bit_rate < encoder->min_bit_rate) {
+ encoder->min_bit_rate = bit_rate;
+ encoder->bit_rate_step = 0;
+ } else if (encoder->status == SPICE_GST_BITRATE_DECREASING &&
+ bit_rate > encoder->bit_rate) {
+ encoder->min_bit_rate = encoder->bit_rate;
+ encoder->bit_rate_step = 0;
+ } else if (encoder->status != SPICE_GST_BITRATE_DECREASING &&
+ bit_rate < encoder->bit_rate) {
+ encoder->max_bit_rate = encoder->bit_rate - SPICE_GST_MIN_BITRATE;
+ encoder->bit_rate_step = 0;
+ }
+ encoder->increase_interval = SPICE_GST_BITRATE_UP_INTERVAL;
+
+ if (encoder->bit_rate_step == 0) {
+ encoder->bit_rate_step = MAX(SPICE_GST_MIN_BITRATE,
+ MIN(SPICE_GST_BITRATE_MAX_STEP,
+ (encoder->max_bit_rate - encoder->min_bit_rate) / 10));
+ encoder->status = (bit_rate < encoder->bit_rate) ? SPICE_GST_BITRATE_DECREASING : SPICE_GST_BITRATE_INCREASING;
+ if (encoder->max_bit_rate / SPICE_GST_BITRATE_MARGIN < encoder->min_bit_rate) {
+ /* We have sufficiently narrowed down the optimal bit rate range.
+ * Settle on the lower end to keep a safety margin and stop
+ * rocking the boat.
+ */
+ bit_rate = encoder->min_bit_rate;
+ encoder->status = SPICE_GST_BITRATE_STABLE;
+ encoder->increase_interval = encoder->has_client_reports ? SPICE_GST_BITRATE_UP_CLIENT_STABLE : SPICE_GST_BITRATE_UP_SERVER_STABLE;
+ set_video_bit_rate(encoder, bit_rate);
+ }
+ }
+ spice_debug("%u set_bit_rate(%.3fMbps) eff %.3f %.3f-%.3f %d",
+ get_last_frame_mm_time(encoder) - encoder->last_change,
+ get_mbps(bit_rate), get_mbps(get_effective_bit_rate(encoder)),
+ get_mbps(encoder->min_bit_rate),
+ get_mbps(encoder->max_bit_rate), encoder->status);
+
+ encoder->last_change = get_last_frame_mm_time(encoder);
+ encoder->bit_rate = bit_rate;
+ /* Adjust the vbuffer size without ever increasing vbuffer_free to avoid
+ * sudden bit rate increases.
+ */
+ int32_t new_size = bit_rate * SPICE_GST_VBUFFER_SIZE / MSEC_PER_SEC / 8;
+ if (new_size < encoder->vbuffer_size && encoder->vbuffer_free > 0) {
+ encoder->vbuffer_free = MAX(0, encoder->vbuffer_free + new_size - encoder->vbuffer_size);
+ }
+ encoder->vbuffer_size = new_size;
+ update_next_frame_mm_time(encoder);
+
+ /* Frames preceeding the bit rate change are not relevant to the current
+ * situation anymore.
+ */
+ encoder->stat_first = encoder->history_last;
+ encoder->stat_size_sum = encoder->stat_size_max = encoder->history[encoder->history_last].size;
+
+ if (bit_rate > encoder->video_bit_rate) {
+ set_video_bit_rate(encoder, bit_rate * SPICE_GST_BITRATE_MARGIN);
+ }
+}
+
+static void increase_bit_rate(SpiceGstEncoder *encoder)
+{
+ if (get_effective_bit_rate(encoder) < encoder->bit_rate) {
+ /* The GStreamer encoder currently uses less bandwidth than allowed.
+ * So increasing the limit again makes no sense.
+ */
+ return;
+ }
+
+ if (encoder->bit_rate == encoder->max_bit_rate &&
+ get_last_frame_mm_time(encoder) - encoder->last_change > SPICE_GST_BITRATE_UP_RESET_MAX) {
+ /* The maximum bit rate seems to be sustainable so it was probably
+ * set too low. Probe for the maximum bit rate again.
+ */
+ encoder->max_bit_rate = get_bit_rate_cap(encoder);
+ encoder->status = SPICE_GST_BITRATE_INCREASING;
+ }
+
+ uint64_t new_bit_rate = MIN(encoder->bit_rate + encoder->bit_rate_step,
+ encoder->max_bit_rate);
+ spice_debug("increase bit rate to %.3fMbps %.3f-%.3fMbps %d",
+ get_mbps(new_bit_rate), get_mbps(encoder->min_bit_rate),
+ get_mbps(encoder->max_bit_rate), encoder->status);
+ set_bit_rate(encoder, new_bit_rate);
+}
+
+
+/* ---------- Server feedback ---------- */
+
+/* A helper for gst_encoder_encode_frame()
+ *
+ * Checks how many frames got dropped since the last encoded frame and
+ * adjusts the bit rate accordingly.
+ */
+static inline gboolean handle_server_drops(SpiceGstEncoder *encoder,
+ uint32_t frame_mm_time)
+{
+ if (encoder->server_drops == 0) {
+ return FALSE;
+ }
+
+ spice_debug("server report: got %u drops in %ums after %ums",
+ encoder->server_drops,
+ frame_mm_time - get_last_frame_mm_time(encoder),
+ frame_mm_time - encoder->last_change);
+
+ /* The server dropped a frame so clearly the buffer is full. */
+ encoder->vbuffer_free = MIN(encoder->vbuffer_free, 0);
+ /* Add a 0 byte frame so the time spent dropping frames is not counted as
+ * time during which the buffer was refilling. This implies dropping this
+ * frame.
+ */
+ add_frame(encoder, frame_mm_time, 0);
+
+ if (encoder->server_drops >= get_source_fps(encoder)) {
+ spice_debug("cut the bit rate");
+ uint64_t bit_rate = (encoder->bit_rate == encoder->min_bit_rate) ?
+ encoder->bit_rate / SPICE_GST_BITRATE_CUT :
+ MAX(encoder->min_bit_rate, encoder->bit_rate / SPICE_GST_BITRATE_CUT);
+ set_bit_rate(encoder, bit_rate);
+
+ } else {
+ spice_debug("reduce the bit rate");
+ uint64_t bit_rate = (encoder->bit_rate == encoder->min_bit_rate) ?
+ encoder->bit_rate / SPICE_GST_BITRATE_REDUCE :
+ MAX(encoder->min_bit_rate, encoder->bit_rate / SPICE_GST_BITRATE_REDUCE);
+ set_bit_rate(encoder, bit_rate);
+ }
+ encoder->server_drops = 0;
+ return TRUE;
+}
+
+/* A helper for gst_encoder_encode_frame() */
+static inline void server_increase_bit_rate(SpiceGstEncoder *encoder,
+ uint32_t frame_mm_time)
+{
+ /* Let gst_encoder_client_stream_report() deal with bit rate increases if
+ * we receive client reports.
+ */
+ if (!encoder->has_client_reports && encoder->server_drops == 0 &&
+ frame_mm_time - encoder->last_change >= encoder->increase_interval) {
+ increase_bit_rate(encoder);
}
- spice_debug("adjust_bit_rate(%.3fMbps)", get_mbps(encoder->bit_rate));
}
@@ -650,22 +906,21 @@ static gboolean create_pipeline(SpiceGstEncoder *encoder)
/* A helper for configure_pipeline() */
static void set_gstenc_bitrate(SpiceGstEncoder *encoder)
{
- adjust_bit_rate(encoder);
- switch (encoder->base.codec_type)
- {
+ /* Configure the encoder bitrate */
+ switch (encoder->base.codec_type) {
case SPICE_VIDEO_CODEC_TYPE_MJPEG:
g_object_set(G_OBJECT(encoder->gstenc),
- "bitrate", (gint)encoder->bit_rate,
+ "bitrate", (gint)encoder->video_bit_rate,
NULL);
break;
case SPICE_VIDEO_CODEC_TYPE_VP8:
g_object_set(G_OBJECT(encoder->gstenc),
- "target-bitrate", (gint)encoder->bit_rate,
+ "target-bitrate", (gint)encoder->video_bit_rate,
NULL);
break;
case SPICE_VIDEO_CODEC_TYPE_H264:
g_object_set(G_OBJECT(encoder->gstenc),
- "bitrate", encoder->bit_rate / 1024,
+ "bitrate", (guint)(encoder->bit_rate / 1024),
NULL);
break;
default:
@@ -1051,8 +1306,10 @@ static int spice_gst_encoder_encode_frame(VideoEncoder *video_encoder,
encoder->height = height;
if (encoder->bit_rate == 0) {
encoder->history[0].mm_time = frame_mm_time;
- encoder->bit_rate = encoder->starting_bit_rate;
- adjust_bit_rate(encoder);
+ encoder->max_bit_rate = get_bit_rate_cap(encoder);
+ encoder->min_bit_rate = SPICE_GST_MIN_BITRATE;
+ encoder->status = SPICE_GST_BITRATE_DECREASING;
+ set_bit_rate(encoder, encoder->starting_bit_rate);
encoder->vbuffer_free = 0; /* Slow start */
} else if (encoder->pipeline) {
set_pipeline_changes(encoder, SPICE_GST_VIDEO_PIPELINE_CAPS);
@@ -1060,7 +1317,8 @@ static int spice_gst_encoder_encode_frame(VideoEncoder *video_encoder,
}
if (rate_control_is_active(encoder) &&
- frame_mm_time < encoder->next_frame_mm_time) {
+ (handle_server_drops(encoder, frame_mm_time) ||
+ frame_mm_time < encoder->next_frame_mm_time)) {
/* Drop the frame to limit the outgoing bit rate. */
return VIDEO_ENCODER_FRAME_DROP;
}
@@ -1088,8 +1346,14 @@ static int spice_gst_encoder_encode_frame(VideoEncoder *video_encoder,
if (rc != VIDEO_ENCODER_FRAME_ENCODE_DONE) {
return rc;
}
+ uint32_t last_mm_time = get_last_frame_mm_time(encoder);
add_frame(encoder, frame_mm_time, (*outbuf)->size);
+ int32_t refill = encoder->bit_rate * (frame_mm_time - last_mm_time) / MSEC_PER_SEC / 8;
+ encoder->vbuffer_free = MIN(encoder->vbuffer_free + refill,
+ encoder->vbuffer_size) - (*outbuf)->size;
+
+ server_increase_bit_rate(encoder, frame_mm_time);
update_next_frame_mm_time(encoder);
return rc;
@@ -1100,21 +1364,115 @@ static void spice_gst_encoder_client_stream_report(VideoEncoder *video_encoder,
uint32_t num_drops,
uint32_t start_frame_mm_time,
uint32_t end_frame_mm_time,
- int32_t end_frame_delay,
- uint32_t audio_delay)
+ int32_t video_margin,
+ uint32_t audio_margin)
{
SpiceGstEncoder *encoder = (SpiceGstEncoder*)video_encoder;
+ encoder->has_client_reports = TRUE;
+
+ encoder->max_video_margin = MAX(encoder->max_video_margin, video_margin);
+ encoder->max_audio_margin = MAX(encoder->max_audio_margin, audio_margin);
+ int32_t margin_delta = video_margin - encoder->last_video_margin;
+ encoder->last_video_margin = video_margin;
+
uint64_t period_bit_rate = get_period_bit_rate(encoder, start_frame_mm_time, end_frame_mm_time);
- spice_debug("client report: %u/%u drops in %ums margins video %3d audio %3u bw %.3f/%.3fMbps",
+ spice_debug("client report: %u/%u drops in %ums margins video %3d/%3d audio %3u/%3u bw %.3f/%.3fMbps%s",
num_drops, num_frames, end_frame_mm_time - start_frame_mm_time,
- end_frame_delay, audio_delay,
+ video_margin, encoder->max_video_margin,
+ audio_margin, encoder->max_audio_margin,
get_mbps(period_bit_rate),
- get_mbps(get_effective_bit_rate(encoder)));
+ get_mbps(get_effective_bit_rate(encoder)),
+ start_frame_mm_time < encoder->last_change ? " obsolete" : "");
+ if (encoder->status == SPICE_GST_BITRATE_DECREASING &&
+ start_frame_mm_time < encoder->last_change) {
+ /* Some of this data predates the last bit rate reduction
+ * so it is obsolete.
+ */
+ return;
+ }
+
+ /* We normally arrange for even the largest frames to arrive a bit over
+ * one period before they should be displayed.
+ */
+ uint32_t min_margin = MSEC_PER_SEC / get_source_fps(encoder) +
+ get_network_latency(encoder) * SPICE_GST_LATENCY_MARGIN;
+
+ /* A low video margin indicates that the bit rate is too high. */
+ uint32_t score;
+ if (num_drops) {
+ score = 4;
+ } else if (margin_delta >= 0) {
+ /* The situation was bad but seems to be improving */
+ score = 0;
+ } else if (video_margin < min_margin * SPICE_GST_VIDEO_MARGIN_BAD ||
+ video_margin < encoder->max_video_margin * SPICE_GST_VIDEO_MARGIN_BAD) {
+ score = 3;
+ } else if (video_margin < min_margin ||
+ video_margin < encoder->max_video_margin * SPICE_GST_VIDEO_MARGIN_AVERAGE) {
+ score = 2;
+ } else if (video_margin < encoder->max_video_margin * SPICE_GST_VIDEO_MARGIN_GOOD) {
+ score = 1;
+ } else {
+ score = 0;
+ }
+ /* A fast dropping video margin is a compounding factor. */
+ if (margin_delta < -abs(encoder->max_video_margin) * SPICE_GST_VIDEO_DELTA_BAD) {
+ score += 2;
+ } else if (margin_delta < -abs(encoder->max_video_margin) * SPICE_GST_VIDEO_DELTA_AVERAGE) {
+ score += 1;
+ }
+
+ if (score > 3) {
+ spice_debug("score %u, cut the bit rate", score);
+ uint64_t bit_rate = (encoder->bit_rate == encoder->min_bit_rate) ?
+ encoder->bit_rate / SPICE_GST_BITRATE_CUT :
+ MAX(encoder->min_bit_rate, encoder->bit_rate / SPICE_GST_BITRATE_CUT);
+ set_bit_rate(encoder, bit_rate);
+
+ } else if (score == 3) {
+ spice_debug("score %u, reduce the bit rate", score);
+ uint64_t bit_rate = (encoder->bit_rate == encoder->min_bit_rate) ?
+ encoder->bit_rate / SPICE_GST_BITRATE_REDUCE :
+ MAX(encoder->min_bit_rate, encoder->bit_rate / SPICE_GST_BITRATE_REDUCE);
+ set_bit_rate(encoder, bit_rate);
+
+ } else if (score == 2) {
+ spice_debug("score %u, decrement the bit rate", score);
+ set_bit_rate(encoder, encoder->bit_rate - encoder->bit_rate_step);
+
+ } else if (audio_margin < encoder->max_audio_margin * SPICE_GST_AUDIO_MARGIN_BAD &&
+ audio_margin * SPICE_GST_AUDIO_VIDEO_RATIO < video_margin) {
+ /* The audio margin has decreased a lot while the video_margin
+ * remained higher. It may be that the video stream is starving the
+ * audio one of bandwidth. So reduce the bit rate.
+ */
+ spice_debug("free some bandwidth for the audio stream");
+ set_bit_rate(encoder, encoder->bit_rate - encoder->bit_rate_step);
+
+ } else if (score == 1 && period_bit_rate <= encoder->bit_rate &&
+ encoder->status == SPICE_GST_BITRATE_INCREASING) {
+ /* We only increase the bit rate when score == 0 so things got worse
+ * since the last increase, and not because of a transient bit rate
+ * peak.
+ */
+ spice_debug("degraded margin, decrement bit rate %.3f <= %.3fMbps",
+ get_mbps(period_bit_rate), get_mbps(encoder->bit_rate));
+ set_bit_rate(encoder, encoder->bit_rate - encoder->bit_rate_step);
+
+ } else if (score == 0 &&
+ get_last_frame_mm_time(encoder) - encoder->last_change >= encoder->increase_interval) {
+ /* The video margin is consistently high so increase the bit rate. */
+ increase_bit_rate(encoder);
+ }
}
static void spice_gst_encoder_notify_server_frame_drop(VideoEncoder *video_encoder)
{
- spice_debug("server report: getting frame drops...");
+ SpiceGstEncoder *encoder = (SpiceGstEncoder*)video_encoder;
+ if (encoder->server_drops == 0) {
+ spice_debug("server report: getting frame drops...");
+ }
+ encoder->server_drops++;
}
static uint64_t spice_gst_encoder_get_bit_rate(VideoEncoder *video_encoder)
--
2.8.0.rc3
More information about the Spice-devel
mailing list